Tender For Interior Decoration At Smc Canteen- 1 Supplying Profiles Of Requredsection Made Of Aluminium Alloy Extrusions Conforming To Is:732-1983 And Is:1285-1975; Annodized ( With Required Film Thickness And Specified Colour / Natural ) Matt Finishe, siliguri-West Bengal

Tender For Interior Decoration At Smc Canteen- 1 Supplying Profiles Of Requredsection Made Of Aluminium Alloy Extrusions Conforming To Is:732-1983 And Is:1285-1975; Annodized ( With Required Film Thickness And Specified Colour / Natural ) Matt Finished Conforming To Is: 1868-1983 For Fabrication Of Composite Door, Sliding & Casement Windows, Partitions, Formed Of Basic Sections Of Any Isi Embossed / Certifiedmake And Brand As Per Direction Of Engineer-In- Charge . ( Payment Will Be Made On Finished Length Of The Work ) . 2 ( A ) In 10-12 Micron Thickness Annodizing Film. 3 ( I ) Naturalwhite. 4 ( I ) Fixedpartitions. ( Unsupported Length Of Vertical Member Upto 1.5 Mtr. Height Of Both Ends Of Vertical Member Restrained But Panels Within 0.9 Sq.M. ) . 5 ( I ) Top Bottom & Side Member. 6 ( A ) In 10-12 Micron Thickness Annodizing Film. 7 ( I ) Naturalwhite. 8 ( I ) Fixedpartitions. ( Unsupported Length Of Vertical Member Upto 1.5 Mtr. Height Of Both Ends Of Vertical Member Restrained But Panels Within 0.9 Sq.M. ) . 9 ( Ii ) Intermidiate Member. 10 ( A ) In 10-12 Micron Thickness Annodizing Film. 11 ( I ) Naturalwhite. 12 ( J ) Fixed Partitions. ( Unsupported Length Of Vertical Members Upto 1.5 Mtr. Height Of Both Ends Of Vertical Members Restrainedbut Panels More Than0.9 Sq.M. ) . 13 ( Iii ) Glazing Clip. 14 Labour Charge For Fabrication And Installation Of Composite Door, Window, Partitions Made From Annodized Extruded Alloy Aluminiumsection For The Following Units:-. 15 ( D ) Partly Glazed And Partly Panelled Partition Or Fixed Glazing Made Of Extruded And Anodised Alloy Aluminium Sections, Fabricationsafter Cutting To Proper Shape And Size , Drilling And Aligning Fitted With Inbuilt Locking Arrangement Cutting The Glass / Board ( Prelaminated / Particle / Block ) To Requisite Shape And Size Moulding The Edges Fitted And Fixed The Glazing Clip And Dry Set Neoprine / Epdm Gasket , Along With All Other Necessary Arrangements For Fixing The Partition To Wall , Floor , Beam , Columns Polysulphide Sealant For Water Proofing If Necessary Complete In All Respect As Per Drawing And Specification And Directions Of The Engineering In Charge. The Rate Includes The Hire Charge Of All Tools And Plants, Adhesive, Joineries Such As Screw , Fastener But Excludes The Cost Of Extruded Aluminium Sections, Epdm Gasket, Glass, Board, Glazing Clip, Locking Arrangement, Etc. 16 ( 1 ) For Partitions Using Sections Of Size:. 17 ( A ) 63.50Mm X 38.10Mm. 18 Bolt Executive Office Desk 19 …. 20 Supreme Ornate Lacquered Finish Plastic Chair With Cushion 21 …. 22 Supplying, Fitting And Fixing Cpvc ( Chlorinated Polyvinylchloride ) Pipes Of Approved Make Conforming To Is-15778:2007 . With All Necessary Accessories, Specials Viz. Socket, Bend, Tee, Union, Cross, Elbo, Nipple, Longscrew, Reducingsocket, Reducing Tee, Short Piece Etc. Fitted With Holder Batsclamps, Including Cutting Pipes, Fitting, Fixing Etc. Completein All Respect Including Cost Of All Necessary Fittings Asrequired, Jointing Materials In Any Position Above Ground. ( Payment Will Be Made On The Centre Line Measurements Oftotal Pipe Line Including All Specials. No Separate Paymentwill Be Made For Accesories, Specials. ( A ) For Exposed Work 23 For Exposed Work 24 ( I ) Cpvc Pipes Class-I, Sdr-11 25 15 Mm Dia. 26 For Exposed Work 27 ( I ) Cpvc Pipes Class-I, Sdr-11 28 25 Mm 29 Supply Of Chlorinated Polyvinyl Chloride ( Cpvc ) Pipes &Fittings Conforming To Is-15778: 2007 30 ( B ) Socket 31 15 Mm Dia. 32 Supply Of Chlorinated Polyvinyl Chloride ( Cpvc ) Pipes &Fittings Conforming To Is-15778: 2007 33 ( C ) Equal Tee 34 15 Mm 35 ( D ) Reducing Socket 36 20Mm X 15Mm Size 37 ( G ) End Cap 38 15 Mm Dia. 39 Supplying, Fitting And Fixing Bib Cock Or Stop Cock. 40 Chromium Plated Bib Cock Short Body ( Equivelent To Code No.511 & Model- Tropical / Sumthing Special Of Essco Or Similar Brand ) . 41 Chromium Plated Bib Cock Long Body With Wall Flange With Aerator ( Equivelent To Code No.512 & Model- Tropical / Sumthing Special Of Essco Or Similar Brand ) . 42 Wash Basin White Vitreous China Of Approved Make ( Without Fittings ) Supplied, Fitted And Fixed In Position On 75Mm X 75Mm X 75Mmwood Blocks And C.I. Brackets Including Two Coats Of Painting Of C.I. Brackets. 43 630 Mm X 450 Mm Size. 44 Supplying, Fitting & Fixing Upvc Pipes A- Type And Fittings Conforming To Is:13592-1992 With All Necessary Clamps Nails, Including Making Holes In Walls, Floor Etc. And Cutting Trenches In Any Soil Through Masoury Concrete Structures Etc. If Necessary And Mending Good Damages Including Jointing With Jointing Materials ( Spun Yarn, Valamoid / Bitumen / M.Seal Etc ) Complete. 45 ( A ) Upvc Pipes. 46 ( Ii ) 110Mm Dia. 47 Providing And Fixing Exterior Quality Aluminium Composite Panel ( Acp ) Wall Cladding On Existing Al. / Ms Frame Work With Gi Brackets, Acp Fixedon The Existing Frame Work By Folding The Edges Of Acp Panel ( Engravingthe Rear Surface Of Acp Sheet ) With Cp Angles, Cleats And Strainless Steelscrews Forming Groves At The Periphery Of Acp Panel. Such Grooves Filledwith Foam And Silicon Sealant Etc. Complete With All Materials ( Butincluding The Cost Of Silicon Sealant ) , Labour, Scaffolding And All Otherincidental Charges Complete In All Respect As Per Specification Anddirection Of Engineer-In-Charge. ( Mode Of Payment Is On Finished Surfacearea Of Acp ) 48 ( A ) 3Mm Thick ( 0.25Mm Al.+2.5Mm Ldpe +0.25Mm Al. Pvdf Coating ) 49 Add 18% For Gst 50 Add 1% For Cess

INR 250 /-

INR 2039.0 /-

INR 1.01 Lakhs /-

Name of Work: Interior Decoration at SMC Canteen

Sl. No.	Item Description
1	Supplying profiles of requredsection made of Aluminium Alloy extrusions conforming to IS:732-1983 and IS:1285-1975; Annodized (with required film thickness and specified colour/natural) matt finished conforming to IS: 1868-1983 for fabrication of composite door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed/ certifiedmake and brand as per direction of Engineer-In- Charge . (Payment will be made on finished length of the work).
2	(A) In 10-12 Micron thickness Annodizing film.
3	(I) NaturalWhite.
4	(i) Fixedpartitions.(unsupported length of vertical member upto 1.5 mtr. Height of both ends of vertical member restrained but panels within 0.9 sq.m.).
5	(i) Top bottom & side member.
6	(A) In 10-12 Micron thickness Annodizing film.
7	(I) NaturalWhite.
8	(i) Fixedpartitions.(unsupported length of vertical member upto 1.5 mtr. Height of both ends of vertical member restrained but panels within 0.9 sq.m.).
9	(ii) Intermidiate member.
10	(A) In 10-12 Micron thickness Annodizing film.
11	(I) NaturalWhite.
12	(j) Fixed partitions. (Unsupported length of Vertical members upto 1.5 mtr. Height of both ends of vertical members restrainedbut panels more than0.9 Sq.m.).
13	(iii) Glazing clip.
14	Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminiumsection for the following units:-.
15	(D) Partly glazed and partly panelled partition or fixed glazing made of extruded and anodised alloy aluminium sections, fabricationsafter cutting to proper shape and size , drilling and aligning fitted with inbuilt locking arrangement cutting the glass / board (prelaminated / particle / block) to requisite shape and size moulding the edges fitted and fixed the glazing clip and dry set neoprine / EPDM gasket , along with all other necessary arrangements for fixing the partition to wall ,floor , beam ,columns polysulphide sealant for water proofing if necessary complete in all respect as per drawing and specification and directions of the Engineering in charge. The rate includes the hire charge of all tools and plants, adhesive, joineries such as screw , fastener but excludes the cost of extruded aluminium sections, EPDM gasket, glass, board,glazing clip, locking arrangement, etc.
16	(1) For partitions using sections of size:.
17	(a) 63.50mm x 38.10mm.
18	Bolt Executive office Desk
19	….
20	Supreme Ornate Lacquered Finish Plastic Chair with Cushion
21	….
22	Supplying, fitting and fixing CPVC (Chlorinated PolyvinylChloride) pipes of approved make conforming to IS-15778:2007 . with all necessary accessories, specials viz. socket,bend, tee, union, cross, elbo, nipple, longscrew, reducingsocket, reducing tee, short piece etc. fitted with holder batsclamps, including cutting pipes, fitting, fixing etc. completein all respect including cost of all necessary fittings asrequired,jointing materials in any position above ground.(Payment will be made on the centre line measurements oftotal pipe line including all specials. No separate paymentwill be made for accesories, specials.(a) For Exposed Work
23	For exposed work
24	(i) CPVC Pipes Class-I,SDR-11
25	15 mm dia.
26	For exposed work
27	(i) CPVC Pipes Class-I,SDR-11
28	25 mm
29	Supply of Chlorinated Polyvinyl Chloride (CPVC ) pipes &fittings conforming to IS-15778: 2007
30	(B) Socket
31	15 mm dia.
32	Supply of Chlorinated Polyvinyl Chloride (CPVC ) pipes &fittings conforming to IS-15778: 2007
33	(C) Equal Tee
34	15 mm
35	(D) Reducing Socket
36	20mm X 15mm size
37	(G) End Cap
38	15 mm dia.
39	Supplying, fitting and fixing bib cock or stop cock.
40	Chromium plated Bib Cock short body (Equivelent to Code No.511 & Model- Tropical /sumthing special of ESSCO or Similar brand).
41	Chromium plated Bib Cock long body with wall flange with aerator (Equivelent to Code No.512 & Model- Tropical /sumthing special of ESSCO or Similar brand).
42	Wash basin white vitreous china of approved make(without fittings) supplied, fitted and fixed in position on 75mm X 75mm X 75mmwood blocks and C.I. Brackets including two coats of painting of C.I. Brackets.
43	630 mm x 450 mm size.
44	Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. and cutting trenches in any soil through masoury concrete structures etc. if necessary and mending good damages including jointing with jointing materials (Spun yarn, valamoid / bitumen/M.seal etc) complete.
45	(A) UPVC PIPES.
46	(ii) 110mm Dia.
47	Providing and fixing exterior quality Aluminium Composite Panel (ACP)wall cladding on existing Al. /MS frame work with GI brackets, ACP fixedon the existing frame work by folding the edges of ACP panel (Engravingthe rear surface of ACP sheet) with CP angles, cleats and strainless Steelscrews forming groves at the periphery of ACP panel. Such grooves filledwith foam and silicon sealant etc. complete with all materials (butincluding the cost of silicon sealant), labour, scaffolding and all otherincidental charges complete in all respect as per specification anddirection of Engineer-in-charge. (Mode of payment is on finished surfacearea of ACP)
48	(a) 3mm thick (0.25mm Al.+2.5mm LDPE +0.25mm Al. PVDF coating)
49	Add 18% for Gst
50	Add 1% for cess