|
| 1 | Complete unwinding, cleaning of slots with soda water, drying with hot air, rewinding with proper size copper wire including varnishing, binding, baking and terminal box connections of the following motors: |
| 2 | 60/70W, 1500RPM.(Ceiling /Pedestal/Table Fans etc.) |
| 3 | 0.37 KW,3000 RPM |
| 4 | 0.55KW, 1500RPM |
| 5 | 0.75KW,1500 RPM |
| 6 | 0.75KW,3000 RPM |
| 7 | 1.1 KW,1500RPM |
| 8 | 1.1KW,3000RPM |
| 9 | 1.5 KW,1500 RPM |
| 10 | 2.2 KW,1500 RPM |
| 11 | 2.2 KW,3000 RPM |
| 12 | 3.7 KW,1500 RPM |
| 13 | 3.7 KW,3000 RPM |
| 14 | 5.5 KW,1500 RPM |
| 15 | 5.5 KW,3000 RPM |
| 16 | 7.5 KW,1500 RPM |
| 17 | 7.5 KW,3000 RPM |
| 18 | 11KW,1500 RPM |
| 19 | 15KW,1500RPM |
| 20 | 15KW,3000RPM |
| 21 | 18.5KW, 1500RPM |
| 22 | 22KW,1500RPM |
| 23 | 30KW,1500RPM |
| 24 | 37KW,1500 RPM |
| 25 | 37KW,3000 RPM |
| 26 | 45KW,3000 RPM |
| 27 | 22 KW, 3000 RPM, Submersible |
| 28 | 45 KW, 3000 RPM, Submersible |
| 29 | 55KW,1500 RPM |
| 30 | 67KW,1500 RPM |
| 31 | 75KW,1500 RPM |
| 32 | 90KW,1500 RPM |
| 33 | 110KW,1500 RPM |
| 34 | Excitor field assembly, 1000 KVA TG Alternator |
| 35 | Supply and Fitting of the following Materials |
| 36 | Fan(Ceiling/Pedestal/Table) Capacitor, 2.5 mfd |
| 37 | Fan(Ceiling/Pedestal/Table)Bearing |
| 38 | Fan(Ceiling/Pedestal/Table)Bushing |
| 39 | Motor Terminal Plate(Upto 5.5 KW) |
| 40 | Motor Terminal Plate(7.5KW-15KW) |
| 41 | Motor Terminal Plate(22KW-37KW) |
| 42 | Motor Terminal Plate(45KW-67KW) |
| 43 | Motor Terminal Plate(75KW-90KW) |
| 44 | Motor Terminal Plate(Above 90KW) |
| 45 | Upto1.1 KW motor. |
| 46 | Shaft welding, cutting and polishing. |
| 47 | Repairing of cover sleeve with cutting, polishing and fitting. |
| 48 | Motor cover C.I welding charges. |
| 49 | Motor complete overhauling and fitting charges. |
| 50 | Repairing of bearing(both side) |
| 51 | Supply and Repairing of stud bolt( upto 8 mm) |
| 52 | 1.5 Kw to 5.5 Kw motor. |
| 53 | Shaft welding, cutting and polishing. |
| 54 | Repairing of cover sleeve with cutting, polishing and fitting. |
| 55 | Motor cover C.I welding charges. |
| 56 | Motor complete overhauling and fitting charges. |
| 57 | Repairing of bearing(both side) |
| 58 | Supply and Repairing of stud bolt( upto 8 mm) |
| 59 | 7.5 Kw to 11 Kw motor |
| 60 | Shaft welding, cutting and polishing. |
| 61 | Repairing of cover sleeve with cutting, polishing and fitting. |
| 62 | Motor cover C.I welding charges. |
| 63 | Motor complete overhauling and fitting charges. |
| 64 | Repairing of bearing(both side) |
| 65 | Supply and Repairing of stud bolt( upto 8 mm) |
| 66 | 15 Kw to 22 Kw motor. |
| 67 | Shaft welding, cutting and polishing. |
| 68 | Repairing of cover sleeve with cutting, polishing and fitting. |
| 69 | Motor cover C.I welding charges. |
| 70 | Motor complete overhauling and fitting charges. |
| 71 | Repairing of bearing(both side) |
| 72 | Supply and Repairing of stud bolt( upto 12 mm) |
| 73 | 30 Kw motor. |
| 74 | Shaft welding, cutting and polishing. |
| 75 | Repairing of cover sleeve with cutting, polishing and fitting. |
| 76 | Motor cover C.I welding charges. |
| 77 | Motor complete overhauling and fitting charges. |
| 78 | Repairing of bearing(both side) |
| 79 | Supply and Repairing of stud bolt( upto 14 mm) |
| 80 | 37 Kw to 45 Kw motor. |
| 81 | Shaft welding, cutting and polishing. |
| 82 | Repairing of cover sleeve with cutting, polishing and fitting. |
| 83 | Motor cover C.I welding charges. |
| 84 | Motor complete overhauling and fitting charges. |
| 85 | Repairing of bearing(both side) |
| 86 | Supply and Repairing of stud bolt( upto 14 mm) |
| 87 | 55 Kw to 67 Kw motor. |
| 88 | Shaft welding, cutting and polishing. |
| 89 | Repairing of cover sleeve with cutting, polishing and fitting. |
| 90 | Motor cover C.I welding charges. |
| 91 | Motor complete overhauling and fitting charges. |
| 92 | Repairing of bearing(both side) |
| 93 | Supply and Repairing of stud bolt( upto 14 mm) |
| 94 | 75 Kw to 110 Kw motor. |
| 95 | Shaft welding, cutting and polishing. |
| 96 | Repairing of cover sleeve with cutting, polishing and fitting. |
| 97 | Motor cover C.I welding charges. |
| 98 | Motor complete overhauling and fitting charges. |
| 99 | Repairing of bearing(both side) |
| 100 | Supply and Repairing of stud bolt( upto 14 mm) |
| 101 | 1000 KVA TG Alternator. |
| 102 | Repairing of bearing coverwith cutting, polishing and fitting. |
| 103 | 22 Kw/30 HP submersible pumpmotor. |
| 104 | Repairing of new SS shaft |
| 105 | Repairing of neck ring, cutting, fitting and polishing. |
| 106 | Impeller metalling, cutting and polishing |
| 107 | Repairing of casing bush. |
| 108 | Repairing of shaft sleeve |
| 109 | Repairing of coupling sleeve |
| 110 | Complete overhauling & fitting charges. |
| 111 | Supply of 6 sqmm Cu. cableand termination with motor end. |
| 112 | Supply and jointing of submersible cable jointing kit . |
| 113 | Repairing of motor bush,cutting, fitting and polishing. |
| 114 | Roller shaft sleeve cutting & polishing |
| 115 | Repairing of thrust bearing |
| 116 | Thrust bearing repairing charges |
| 117 | 45 Kw/60 HP submersible pumpmotor. |
| 118 | Repairing of new SS shaft |
| 119 | Repairing of neck ring, cutting, fitting and polishing. |
| 120 | Impeller metalling, cutting and polishing |
| 121 | Repairing of casing bush. |
| 122 | Repairing of shaft sleeve |
| 123 | Repairing of coupling sleeve |
| 124 | Complete overhauling & fitting charges. |
| 125 | Supply of 16 sqmm Cu. cableand termination with motor end. |
| 126 | Supply and jointing of submersible cable jointing kit . |
| 127 | Repairing of motor bush,cutting, fitting and polishing. |
| 128 | Roller shaft sleeve cutting & polishing |
| 129 | Repairing of thrust bearing |
| 130 | Thrust bearing repairing charges |
