Additional Civil Works Related To Shifting Of Rttc From Gachibowli Tot.E Building Erragadda, Hyderabad. - Earth Work In Excavation By Mechanical Means ( Hydraulic Excavator ) / Manual Means In Foundation Trenches Or Drains ( Not Exceeding 1.5 M In Width Or 10 Sqm On Plan ) Including Dressing Of Sides And Ramming Of Bottoms, Lift Up To 1.5 M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M. 2 All Kinds Of Soil. 3 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level 4 1:5:10 ( 1 Cement : 5 Coarse Sand ( Zone-Iii ) : 10 Graded Stone Aggregate 40 Mm Nominal Size ) 5 Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement - All Work Up To Plinth Level : 6 1:1.5:3 ( 1 Cement : 1.5 Coarse Sand ( Zone-Iii ) : 3 Graded Stone Aggregate 20 Mm Nominal Size ) 7 Providing, Hoisting And Fixing Above Plinth Level Up To Floor Five Level Precast Reinforced Cement Concrete Work In String Courses, Bands, Copings, Bed Plates, Anchor Blocks, Plain Window Sills And The Like, Including The Cost Of Required Centering, Shuttering But, Excluding Cost Of Reinforcement, With 1:1.5:3 ( 1 Cement : 1.5 Coarse Sand ( Zone-Iii ) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources ) . 8 Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Level. 9 Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More. 10 Brick Work With Common Burnt Clay F.P.S. ( Non Modular ) Bricks Of Class Designation 3.5 In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In : 11 A ) Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand ) 12 Providing And Fixing 18 Mm Thick Gang Saw Cut, Mirror Polished, Premoulded And Prepolished, Machine Cut For Kitchen Platforms, Vanity Counters, Window Sills, Facias And Similar Locations Of Required Size, Approved Shade, Colour And Texture Laid Over 20 Mm Thick Base Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) , Joints Treated With White Cement, Mixed With Matching Pigment, Epoxy Touch Ups, Including Rubbing, Curing, Moulding And Polishing To Edges To Give High Gloss Finish Etc. Complete At All Levels. 13 Granite Of Any Colour And Shade 14 Area Of Slab Upto 0.50 Sqm 15 Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming To Is: 15622 ( Thickness To Be Specified By The Manufacturer ) , Of Approvedmake, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge, In Skirting, Risers Of Stepsand Dados, Over 12 Mm Thick Bed Of Cement Mortar 1:3 ( 1 Cement : 3 Coarse Sand ) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. 16 Providing And Fixing Aluminium / Brass Sliding Door Bolts Isi Marked Anodised ( Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour Or Shade With Nuts And Screws Etc. Complete 17 A ) 250X16 Mm 18 Providing And Fixing Aluminium Tower Bolts Isi Marked Anodised ( Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour Or Shade With Necessary Screws Etc. Complete 19 A ) 300X10 Mm 20 B ) 150X10 Mm 21 Providing And Fixing Aluminium Handles Isi Marked, Anodised ( Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour Or Shade With Necessary Screws Etc. Complete 22 A ) 100 Mm 23 Providing And Fixing To Existing Door Frames. 24 A ) 30 Mm Thick Factory Made Polyvinyl Chloride ( Pvc ) Door Shutter Made Of Styles And Rails Of A Upvc Hollow Section Of Size 60X30 Mm And Wall Thickness 2 Mm ( ± 0.2 Mm ) , With Inbuilt Decorative Moulding Edging On One Side. The Styles And Rails Mitred And Joint At The Corners By Means Of M.S. Galvanised / Plastic Brackets Of Size 75X220 Mm Having Wall Thickness 1.0 Mm And Stainless Steel Screws. The Styles Of The Shutter Reinforced By Inserting Galvanised M.S. Tube Of Size 25X20 Mm And 1 Mm ( ± 0.1 Mm ) Wall Thickness. The Lock Rail Made Up Of ‘H’ Section, A Upvc Hollow Section Of Size 100X30 Mm And 2 Mm ( ± 0.2 Mm ) Wall Thickness Fixed To The Shutter Styles By Means Of Plastic / Galvanised M.S. ‘U’ Cleats. The Shutter Frame Filled With A Upvc Multi-Chambered Single Panel Of Size Not Less Than 620 Mm, Having Over All Thickness Of 20 Mm And 1 Mm ( ± 25 0.1 Mm ) Wall Thickness . The Panels Filled Vertically And Tie Bar At Two Places By Inserting Horizontally 6 Mm Galvanised M.S. Rod And Fastened With Nuts And Washers, Complete As Per Manufacturer’S Specification And Direction Of Engineer-In-Charge. 26 Steel Work Welded In Built Up Sections / Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required. 27 In Stringers, Treads, Landings Etc. Of Stair Cases, Including Use Of Chequered Plate Wherever Required, All Complete. 28 Providing And Laying Ceramic Glazed Floor Tiles Of Size 300X300 Mm ( Thickness To Be Specified By The Manufacturer ) Of 1St Quality Conforming To Is : 15622 Of Approved Make In Colours Such As White, Ivory, Grey, Fume Red Brown, Laid On 20 Mm Thick Cement Mortar 1:4 ( 1 Cement :4 Coarse Sand ) , Jointing With Grey Cement Slurry @ 3.3Kg / Sqm Including Pointing The Joints With White Cement And Matching Pigment Etc., ., Complete. 29 Providing And Fixing 15 Mm Thick Densified Tegular Edged Eco Friendly Light Weight Calcium Silicate False Ceiling Tiles Of Approved Texture Of Size 595 X 595 Mm In True Horizontal Level, Suspended On Inter Locking Metal Grid Of Hot Dipped Galvanised Steel Sections ( Galvanising @ 120 Grams Per Sqm Including Both Side ) Consisting Of Main ‘T’ Runner Suitably Spaced At Joints To Get Required Length And Of Size 24X38 Mm Made From 0.33 Mm Thick ( Minimum ) Sheet, Spaced 1200 Mm Centre To Centre, And Cross “T” Of Size 24X28 Mm Made Out Of 0.33 Mm ( Minimum ) Sheet, 1200 Mm Long Spaced Between Main ’T’ At 600 Mm Centre To Centre To Form A Grid Of 1200X600 Mm And Secondary Cross ‘T’ Of Length 600 Mm And Size 24 X 28 Mm Made Of 0.33 Mm Thick ( Minimum ) Sheet To Be Inter Locked At Middle Of The 1200X 600 Mm Panel To From Grid Of Size 600X600 Mm, Resting On Periphery Walls / Partitions On A Perimeter Wall Angle Pre-Coated Steel Of Size ( 24X24x3000 Mm Made Of 0.40 Mm Thick ( Minimum ) Sheet With The Help Of Rawl 30 Plugs At 450 Mm Centre To Centre With 25 Mm Long Dry Wall Screws @ 230 Mm Interval And Laying 15 Mm Thick Densified Edges Calcium Silicate Ceiling Tiles Of Approved Texture In The Grid, Including, Cutting / Making Opening “For Services Like Diffusers, Grills, Light Fittings, Fixtures, Smoke Detectors Etc., Wherever Required. 31 Main ‘T’ Runners To Be Suspended From Ceiling Using G.I. Slotted Cleats Of Size 25X35x1.6 Mm Fixed To Ceiling With 12.5 Mm Dia And 50 Mm Long Dash Fasteners, 4 Mm G.I. Adjustable Rods With Galvanised Steel Level Clips Of Size 85 X 30 X 0.8 Mm, Spaced At 1200 Mm Centre To Centre Along Main ‘T’, Bottom Exposed With 24 Mm Of All T Sections Shall Be Pre-Painted With Polyester Baked Paint, For All Heights, As Per Specifications, Drawings And As Directed By Engineer-In-Charge. 32 Note :- Only Calcium Silicate False Ceiling Area Will Be Measured From Wall To Wall. No Deduction Shall Be Made For Exposed Frames / Opening ( Cut Outs ) Having Area Less Than 0.30 Sqm. The Calcium Silicate Ceiling Tile Shall Have Nrc Value Of 0.50 ( Minimum ) , Light Reflection > 85%, Non- Combustible As Per B.S. 476 Part Iv, 100% Humidity Resistance And Also Having Thermal Conductivity <0.043 W / Mk. 33 Distempering With 1St Quality Acrylic Distemper, Having Voc ( Volatile Organic Compound ) Content Less Than 50 Grams / Litre, Of Approved Brand And Manufacture, Including Applying Additional Coats Wherever Required, To Achieve Even Shade And Colour. 34 Two Coats 35 Applying Priming Coats With Primer Of Approved Brand And Manufacture, Having Low Voc ( Volatile Organic Compound ) Content. 36 With Water Thinnable Cement Primer On Wall Surface Having Voc Content Less Than 50 Grams / Litre. 37 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade : 38 ( A ) One Or More Coats On Old Work. 39 Removing Dry Or Oil Bound Distemper, Water Proofing Cement Paint And The Like By Scrapping, Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches Etc. Complete. 40 Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade : 41 Old Work ( Two Or More Coat Applied @ 1.67 Ltr / 10 Sqm ) On Existing Cement Paint Surface ) . 42 Repairs To Plaster Of Thickness 12 Mm To 20 Mm In Patches Of Area 2.5 Sq. Meters And Under, Including Cutting The Patch In Proper Shape, Raking Out Joints And Preparing And Plastering The Surface Of The Walls Complete, Including Disposal Of Rubbish To The Dumping Ground , All Complete As Per Directions Of Engineer-In-Charge. 43 A ) With Cement Mortar 1:4 ( 1 Cement : 4 Fine Sand ) . 44 Making The Opening In Brick Masonry Including Dismantling In Floor Or Walls By Cutting Masonry And Making Good The Damages To Walls, Flooring And Jambs Complete, To Match Existing Surface I / C Disposal Of Mulba / Rubbish To The Nearest Municipal Dumping Ground, All Complete As Per Directions Of Engineer-In-Charge. 45 For Door / Window / Clerestory Window. 46 Providing And Fixing White Vitreous China Pedestal Type Water Closet ( European Type W.C. Pan ) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device ( Handle Lever ) , Conforming To Is : 7231, With All Fittings Andfixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required : 47 A ) W.C. Pan With Isi Marked White Solid Plastic Seat And Lid 48 Providing And Fixing Water Closet Squatting Pan ( Indian Type W.C.Pan ) With 100 Mm Sand Cast Iron P Or S Trap, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device ( Handle Lever ) Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls Andfloors Wherever Required: 49 ( A ) White Vitreous China Orissa Pattern W.C. Pan Of Size 580X440 Mm With Integral Type Foot Rests 50 Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm Ptmt Pillar Cock, 32 Mm Ptmt Waste Coupling Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Required. White Vitreous China Flat Back Wash Basin Size 550X400 Mm With Single 15 Mm Ptmt Pillar Cock. 51 Providing And Fixing White Vitreous China Flat Back Or Wall Corner Type Lipped Front Urinal Basin Of 430X260x350 Mm Or 340X410x265 Mm Sizes Respectively. 52 Providing And Fixing Mirror Of Superior Glass ( Of Approved Quality ) And Of Required Shape And Size With Plastic Moulded Frame Of Approved Make And Shade With 6 Mm Thick Hard Board Backing : 53 ( A ) Rectangular Shape 453X357 Mm 54 Providing And Fixing Chlorinated Polyvinyl Chloride ( Cpvc ) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer In Charge. : Internal Work - Exposed On Wall 55 A ) 20 Mm Nominal Outer Dia. Pipes. 56 B ) 25 Mm Nominal Outer Dia .Pipes. 57 Making Connection Of G.I. Distribution Branch With G.I. Main Of Following Sizes By Providing And Fixing Tee, Including Cutting And Threading The Pipe Etc. Complete : 58 A ) 25 To 40 Mm Nominal Bore 59 Providing And Fixing Ball Valve ( Brass ) Of Approved Quality, High Or Low Pressure, With Plastic Floats Complete : 60 20 Mm Nominal Bore 61 25 Mm Nominal Bore 62 Providing And Fixing Cpvc Union / Cpvc Nepple In G.I / Cpvc Pipe Including Cutting And Threading The Pipe And Making Long Screws Etc. Complete ( New Work ) 63 A ) 20 Mm Nominal Bore 64 B ) 25 Mm Nominal Bore 65 Providing And Fixing Ptmt Bib Cock Of Approved Quality And Colour. 66 Ptmt Bib Cock 15Mm Nominal Bore, 86 Mm Long. Weighing Not Less Than 88 Gms.Of Approved Quality And Colour. 67 Providing And Fixing Ptmt Stop Cock Of Approved Quality And Colour. 68 Ptmt Stop Cock15 Mm Nominal Bore, 86 Mm Long. Weighing Not Less Than 88 Gms. Of Approved Quality And Colour. 69 Providing And Fixing Ptmt Soap Dish Holder Having Length Of 138 Mm, Breadth 102 Mm, Height Of 75 Mm With Concealed Fitting Arrangements. Weighing Not Less Than 106 Gms. 70 Providing And Fixing At All Floors Type B - Swr Pvc Pipes Of Approved Makeincluding All Fittings Such As Plain And Door Bends, Tees, Elbows, Equal And Unequal Junctions, Heel Rest Sanitary Bends, Collars Etc. ( Except Floor Traps / P Traps ) Confirming To Is13592, Is 14735, Including Jointing With Solvent And Providing Necessary Supports, Clamps / Ms Brackets At Specified Intervals. The Joints Of Pipe And Fittings Shall Be Of Drip Seal Jointingin Exposed Areas Like In Shafts Etc.And Pasted Type ( Solvent ) For All Other Locations Etc. All Operations Complete And As Per Directions Of Engineer - In - Charge. Ms Brackets Shall Be Paid Separately 71 I ) 75Mm 72 Ii ) 100Mm 73 Removing Glass Panes From Windows And Replacing Them With New Glass Panes With Putty And Nails Wherever Necessary : Float Glass Panes Of Thickness 4Mm 74 A ) For Windows In Ground Floor And / Or For Windows Which Can Be Accessed From Inside Of The Room / Bolcony With Ladder Arrangement Wherever Necssary Etc. All Operations Complete As Directed By E.I.C 75 B ) For Windows In Upper Floors ( Other Than Ground Floor ) Up To 8 Floors With Necessary Jhoola Arrangement Etc. All Operations Complete As Directed By E.I.C 76 Charges For Minor Repairs To Wooden Panelled / Flush Doors / Window Setc., . Cost Includes All Labour For Attending Minor Repairs Like Sides Planing For Proper Functioning And Refixing Screws After Attending Necessary Repairs Etc., With Necessary Screws, Nails Etc., Etc. All Operations Complete As Directed By E.I.C ( Cost Of Wood Will Be Paid Separately, But I / C Required Screws ) 77 A ) Wooden Door / Window / Cupboards 78 Providing And Fixing Of Approved Quality And Colour Etc. All Operations Complete As Directed By The Engineer In Charge. 79 A ) Health Pauset Set With Wall Support Lever Of 15Mm Nominal Bore Stainless Steel / Cp Brass Nozzle Jet And Handle Of Approved Quality And Make For Ewc 80 B ) C.P. Brasstwo In One Bib Cock 15 Mm Nominal Bore. Of Approved Quality Conforming To Is:8931: 81 Charges For Demolising The Existing Wc Pan With Trap From Position Including Surrounding Lime Concrete Comple To Minium Required Size To Fix New Wc Pan With Trap Including Jointing With The Existing Waste, Refilling The Surroundings 82 With Lime Concrete And Finishining The Floor With Cement Concrete Flooring Using Required Quantity Of Fose Rock Or Equivalant Liqued Etc. All Operations Complete As Per The Direction Of Engineer-In Charge. ( The Rate Includes The Disposal Of All The Debries To The Dumpimg Ground But Excluding The Cost Of Indian Wc / European Wc Which Shall Be Paid In Relevant Item. ) 83 Dismantlingpowder Coated / Anodized Aluminium Partitons, Doors And Other Frames Including Proper Numbering, Loading And Unloading And Stacking By Placing At The Required Place In The Building Premises Etc. All Operations Complete As Directed By The Engineer-In-Charge . ( Area Of Partition Is Measured For Payment ) 84 Fixingpowder Coated / Anodized Aluminum Partitions And Doors At All Levels & Heights With Available Materials At Stores After Making Required Sections As Per The Drawing For Powder Coated Aluminum Sections , Particle Board, Glass Panels And Snap On Beading Including Fixed With Rawl Plugs And Screws Or With Fixing Clips, Or With Expansion Hold Fasteners Including Necessary Filling Up Of Gaps At Junctions At Top, Bottom And Sides Wherever Required Etc, All Operations Completeas Perthe Directions Of The Engineer-In-Charge. 85 Removing Existing / Available Supersil 84G False Ceiling System At Te Building, Jeedimetla And Refixing At All Levels & Heights Including Providing And Fixing Of Frame Work Made Of Special Sections Wherever Required At Rttc, Erragadda As Per Requirement Etc. Complete All Operations As Directed By Engineer-In-Charge. 86 Removing Existing / Available False Flooring Tiles From Te Building, Jeedimetla And Refixingat Te Erragadda At All Levels & Heights As Per Requirement Etc. All Operations Completeas Directed By Engineer-In-Charge. 87 Providing And Fixing 9Mm Thick Bwp & Termite Resistant Plywood For Closingdoors, Windows & Ventilator Openingswith C.P. Brass / Stainless Steel Screws Etc. Complete All Operations As Perdirections Of Engineer-In-Charge. 88 Fixing Available Steel Letters Rttc Each Of Size 1Mx1.20M On Granitewith Plugs / Screws / Studs As Required Including Drilling Of Holes In Graniteincluding Necessary Filling Up With Araldite Wherever Required Etc, Complete All Operations As Perthe Directions Of The Engineer-In-Charge. 89 Removing Of Arch Shaped Ms Frame Name Board On Portico Of Size 9M At Rttc, Gachibowli And Refixing At Erragadda Te Buildingcomplete All Operationsas Perthe Directions Of The Engineer-In-Charge. ( Cost Includes Removal Of Name Board With Required Machinary And Making It To Required Size And Shape And Fixing At Erragadda. ) 90 Transportation Of Arch Shaped Ms Framename Board On Portico Of Size 9M, Sink, Wash Basin & Door ( Pgm Chamber ) At Rttc, Gachibowli To Te Building, Erragadda Etc. All Operations Complete As Perthe Directions Of The Engineer-In-Charge. 91 Transportation Of All Existing Available Dismantled / Removed ( 1 ) Aluminium Partions Consisting Tubular / Box Sections Etc. Of Aluminuim, Glass Panes, Plp Boards Etc. ( 2 ) False Ceiling Materials Consisting Of Supersil 84G Panels With Entire Grid Hanging System Of Clips / Cleats, Hangers Etc. ( 3 ) Fase Flooringat Switch Rooms Complete System Of Raised Flooring Arrangement Like Pedestals, Brackets, Pedestal Base, Pedestal Head, Flooring Panels Etc. And Any Other Departmental Materials As Per Requierment From All Locations Of Stores Within And Around 30Kms Of The Site By Mechanical Transportation Including Loading And Un-Loading From Stores To Work Site And Aswell Asstacking Stock Piles At Work Site At All Floors & Levels Of Te Building, Erragadda Etc. All Operations Complete Including All Incidental Costs Etc. As Perthe Directions Of The Engineer-In-Charge.
