Military Engineer Services-MES has published Provision Of Guard Room At Main Gate Of Hq 101 Area And Provn Of Rcc Water Tank Structure At Bldg No Lm-44 To Lm -45 ( Hazipir Line ) At Fcsr And Provn Of 01 X Ladies And 01 X Gents Toilet Near Workshop Bldg Under Hq . Submission Date for this Tender is 12-10-2022. Building Work Tenders in shillong Meghalaya. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 05-Oct-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 12-10-2022 |
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 2 | Demolition of Brickwork/solid concrete block work built in Cement mortar complete all as specified and as directed. |
| 3 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 4 | Taking down chowkats or frames n. exc 1.50 Sqmeach with shutters (without taking off shutter from the frames) complete all as specified and as directed. |
| 5 | Taking down shutters of any descriptionnexc 1.0 Sqm refixing in same openingcomplete all as specified and as directed. |
| 6 | Taking down shutters of any descriptionexc 1.0 Sqm and nexc 2 sqm refixing in same openingcomplete all as specified and as directed. |
| 7 | Taking down shutters of any description nexc.1.0 Sqm each complete all as directed |
| 8 | Demolition of cement concrete in ground floors and pavings n exc 15cm thickness (below or above ground lever) complete all as specified and as directed. |
| 9 | Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid in any mortar complete all as specified and as directed. |
| 10 | Demolition and breaking up drain pipes 150mmdia (salt glaged stone ware AC or reinforced concrete pipe set in cm) complete all as specified and as directed. |
| 11 | Taking up or down steel tubing and disconnection, for 15mm bore of pipes complete all as specified and as directed. |
| 12 | Taking up or down steel tubing and disconnection, for 20mm bore of pipes complete all as specified and as directed. |
| 13 | Surface dressing n exc 15cm deep in soft/loose soil, complete all as specified. |
| 14 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soilcomplete all as specified and as directed |
| 15 | Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m in depth and getting out insoft/loose soil, complete all as specified and as directed . |
| 16 | Excavation in post holes not exc. 0.5 cum, getting out returing, filling in and ramming earth and broken hard core/rubble mixed with earth with around the layers not exiding 25 cm each layers watering and removing surplus soil to a distance not exceeding 50 cm making good complete in soft/loose soil complete all as specified and as directed. |
| 17 | Rough excavation not exceeding 1.50 m deep and getting out soft/loose complete all as specified and as directed |
| 18 | Returning, filling incl spreading levelling watering and well ramming in layers n exc 25 cm thick each layer complete all as specified and as directed. |
| 19 | Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.50m above the starting point. |
| 20 | Removing of excavated soil to a distance exc 250m but n exc 500m and deposited where directed n exc 1.5 m above the starting pointcomplete all as specified and as directed |
| 21 | Removing excavated material exc 500m and nexc 1.5 km depositing where directed at a level n.exc 1.50m above the starting point complete all as specified and as directed |
| 22 | Earth filling under floors incl spreading, leveling in layers n.exc 25cm thick including well ramming and watering as reqd complete all as specified and as directed |
| 23 | M & L PCC 1:4:8 type D2 (using 40 mm graded aggregate) as in Foundation filling and mass concrete complete all as specified and as directed |
| 24 | M&L for Reinforced cement concrete (nominal mix) 1:1.5:3 type A1 (20mm graded aggregate) in foundation including rafts,footings, foundation beams, plinth beams, bases for columns etc, basement slabs, and mass concrete etc , complete all as specified and as directed |
| 25 | M&L for Reinforced cement concrete (nominal mix) 1:1.5:3 type A1 (20mm graded aggregate)in columns, pillars, piers, post and struts , complete all as specified and as directed |
| 26 | M&L for Reinforced cement concrete (nominal mix) 1:1.5:3 type A1 (20mm graded aggregate)in beams, cantilevers, lintels over 1.5 m span etc., complete all as specified and as directed |
| 27 | M&L for Use and waste of formwormk to side of concrete foundation, footings, bases of columns, rafts and raft beams, side and soffit of foundation and plinth beams flat, for rough finished surfaces of concrete , complete all as specified and as directed |
| 28 | M&L for Use and waste of formwork to sides of pillars,columns and stanchions, square or rectngular,for rough finished surfaces of concrete , complete all as specified and as directed |
| 29 | M&L for Use and waste of formwork to sides and soffit of floor and roof beams, beam haunchings, girders, shelves etcflatfor rough finished surfaces of concrete , all as specified. |
| 30 | M&L for TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hookings ends and binding mild or securing with clips as specified. |
| 31 | M&L for mild steel TMT 5mm dia and over as in stirrups cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hookings ends and binding mild or securing with clips complete all as specified and as directed |
| 32 | M&L for precast cement concrete block masonry with solid blocks exc 10 cm in width with PCC (1:3:6), type C-1, (using 20mm graded stone aggregate) and setting in CM(1:6) complete all as specified and directed. |
| 33 | M&L for precast cement concrete block massonry with solid blocks nexc 10 cm in width and settings in CM 1:4 type C1 1:3:6 (20mm graded aggregate) complete all as specified. |
| 34 | M&L for rendering 15mm thick in two coats on fair finish of concrete surface of wall in CM (1:4) and finished the surface fair& even without using extra cement , completeall as specified and as directed |
| 35 | M&L for rendering 10mm thick on concrete surface of wall in CM (1:6) and finished the surface fair& even without using extra cement , completeall as specified and as directed |
| 36 | Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 37 | M&L for rendering 5mm thick on fair faces of brick work in CM 1:3 finished even and smooth without using extra cement complete all as specified and as directed. |
| 38 | M&L for rendering15mm thick on fair faces of brick work in CM 1:4 and mixing with WPC @ 3% weight of cement finished even and smooth without using extra cement complete all as specified and as directed. Note : WPC shall be measured and paid seperately as supply only. |
| 39 | Supply only Integral waterproofing compound |
| 40 | M&L for providing precast cement concrete set in CM (1:4) type B1 1:2;4 (20 mm graded aggregate)in landings,cover slabs , shelves and similar artilces with plain facesincl formwork complete all as directed and as specified |
| 41 | M&L for rendering 15mm thick on fair faces of brick work in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed. |
| 42 | M & L Hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed. |
| 43 | M & L 100mm thick PCC 1:3:6 type C2 as in subfloors finished even and rough without using extra cement complete all as specified and as directed. |
| 44 | M&L for PCC 1:3:6 type C-2(using 20 mm graded cr. stone aggr),75mm thick as in plinth protection finished even and smooth without using extra cement layed in bays not exc. 2.00m complete all as specified. |
| 45 | M & L for PCC 1:2:4 type B1 (Using 20 mm graded aggr) as in coping and similar works incl necessary from work complete all as specified and as directed |
| 46 | S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates including distance pieces, cleats, plates, welding/rivets/bolts etc complete all as specified. |
| 47 | S&F plates 6mm thick (plain or chequered ) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment of Fe -410-W( Gde-E-250 quality-A)complete all as specified and as directed. |
| 48 | M&L for preparation of new or previously untreated surface ofsteel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified. |
| 49 | S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screwscomplete all as specified and as directed. |
| 50 | S&F pre painted galvalume aluminium zinc coating GI based plain steel sheet as in ridge of 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws complete all as specified and as directed. |
| 51 | M&L for 4mm thick non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/Aluminium frame work with screws as in ceiling complete, complete all as specified and directed. |
| 52 | S&F aluminium snap grid frame work for false ceiling incl 6mm dia GIhanger (upto 1200mm length) adjusting level fixed to roof slab/truss/purlins/rafters @ 12.m C/C by means of ceiling cleats made out of GI flat 40x 3mm size 60mm long and expansion hold fasteners 12.5 mm dia and 40mm long complete all as specified and as directed. |
| 53 | Spreading and levelling in layers n exc.25cm thick , well ramming including watering as required, complete all as specified and as directed |
| 54 | M&L for 100mm thick cement concrete type D2, 1:4:8 (40mm graded aggregate) as in sub base for floors complete all as specified and as directed |
| 55 | M&L for 25 mm thick cement concrete 1:3:6, Type C1 (20 mm graded aggregate) as in floor for tiles complete all as specified and as directed |
| 56 | M & L 40 mm thick PCC 1:3:6 type C1(20 mm graded) as in subfloors finished even and rough without using extra cement complete all as specified and as directed. |
| 57 | M&L for 18/20mm thk granite slab ( as in table top rubbed and polished) as in counter basin fixed in CM 1:4, pointing in white cement 1:2 using granite dust with admixture of pigment to match completeall as directed. |
| 58 | Labour only for chamfer , splays or arris in facework of Granite exc 15mm wide complete all as specified and as directed |
| 59 | M&L for non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular joint free) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortar 15mm thick in CM 1:6, complete all as specified and as directed |
| 60 | All as per item No 59 abvoe but onvertical surfaces, skirting over 10mm thick rendering in CM1:4 complete all as specified and as directed |
| 61 | M&L for Non Skid coloured ceramic tiles 7 to 8 mm thick, joint free, area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc, laid over 15 mm thick screed bed 1:6 ,set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile colourcomplete all as specified and directed. |
| 62 | M&L for non skid ceremic white tiles7 to 8mm thkarea of each tile exc 0.18 sqm but n exc 0.36 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar.Laid over and including15 mm thick cement screed bedin CM 1:6 complete all as specified and as directed. |
| 63 | M&L for non skid ceremic white tiles7 to 8mm thkarea of each tile exc 0.18 sqm but n exc 0.36 sqm as invertical surface etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar.Laid over and including10 mm thick rendering in CM 1:4 complete all as specified and as directed. |
| 64 | M&L for non skid ceremiccoloured tiles7 to 8mm thickarea of each tile exc 0.11 sqm but n exc 0.18 sqm as invertical surface etc. as glass mosaic tiles set and jointed in neat cement slurry and pointed in white or coloured cement to mortar or with and incl adhesive suitable for glass mosaic tiles laid over and including10 mm thick cement renderingin CM 1:4 complete all as specified and as directed. |
| 65 | M&L for vitrified ceramic tiles 10mm thick ( square/ Rectangular) dark shade polished area of each tiles not exceeding 0.36 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white cement complete over 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 66 | All as Per Item no 65 above but in vertical surfaces such as skirting / dado laid over and incl. a backing coat of 10mm thk CM 1:4 complete all as specified |
| 67 | M&L for vitrified tiles lightshade (square /rectangular) polished area of each tiles nexc 0.36 sqm in floors laid over and incl. 20mm thk 1:6 screed bed jointed pointed with coloured cement to match the tiles complete all as specified and as directed. |
| 68 | All as Per Item no67 above but in vertical surfaces such as skirting / dado laid over and incl. a backing coat of 10mm thk CM 1:4 |
| 69 | M&L for glazed coloured ceramic tiles in vertical surface 300x450mm x 7mm or 250x350mm x 7mm thick, joint free, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 10mm thick rendering in CM1:4 complete all as specified and as directed. |
| 70 | S&F powder coated (min powder coating 50 micron) anodized aluminium frame for doors, windos, ventilators plain or sliding type with one or more rebated incl joining cleat for fixing etc complete all as specifed and directed. |
| 71 | S&F powder coated(powder coating min 50 micron)anodised window shutters fixed type/ aluminium Partition fully glazed , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , hinges , anodised aluminium snap beading screws etc complete all as specified |
| 72 | S&F powder coated(powder coating min 50 micron)anodised window and ventilator shutters side hung/sliding type without sash , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150 mm long(1 no) hinges type B-21 100 mm long (2 no) suitable handle (1 no ) complete as specified |
| 73 | M&Lfor wrought second class hard wood in scantlings framed and fixed complete all as specified and directed |
| 74 | M&L for preparation of wood and wood based materials, new or old of any description and girth not otherwise described and treated with creosote oil complete all as specified |
| 75 | S&F 30 mm thk Flush door shutters solid core construction with block board core and ply wood face pannels commercial veneered on both facescomplete all as specified and as directed. |
| 76 | M&L for Prelaminated particle board of 12 mm thk board ,interior grade ,prelaminated one side with decorative choice lamination & other side balancing , white lamination , fixed with screws to timber frame work complete all as specified and as directed. |
| 77 | S&F for 2nd class hard wood plain, solid, straight chowkats and frames wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and directed. |
| 78 | S&F for 35mm thick, factory made, 2nd class hard wood, Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressuretreatedcomplete all as specified and as directed |
| 79 | S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top and bottom rails.MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement supplying and fixing in the fram at site as per specification and drawing complete all as specified and as directed. |
| 80 | S&F factory made solid PVC moulded door shutter with particle board core 28 to 30 mm thick (stiles) with 2,4 or 6 raised panel design with 2 mm thick moulded PVC sheet on front face & 2 mm plain colour PVC sheet on back face as per specification complete all as specified and as directed. |
| 81 | S&F solid PVC door frame of size 50 mmx 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specifiecation complete all as specified and as directed. |
| 82 | S&F aluminium anodised 150 mm long barrel tower bolts with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed. |
| 83 | S&F aluminium anodised 100 mm long barrel tower bolts with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed. |
| 84 | S&F aluminium cast type handles fabricated type of size 100 mm complete all as specified and as directed. |
| 85 | S&F Butt hinges, medium weight, cold rolled mild steel,size of hinges 100mm complete all as specified and as directed |
| 86 | S&F Aluminium alloy, anodised sliding door bolts(250mm long) with hasp,staples( bolt type) and fixing clip of sheet,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed |
| 87 | S&F Aluminium handle 150 mm long cast type anodised, complete all as specified. |
| 88 | S&F Aluminium tower bolt (200 mm long), anodised barrel tower bolts of extruded section complete all as specified. |
| 89 | S&F for 35mm thick, factory made, 2nd class hard wood, glazed and skeleton shutter open rebated and prepared to receive glass,gauze etc. without sash bars edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc complete all as specified. |
| 90 | S&F for 30mm thick, factory made, 2nd class hard wood, glazed and skeleton shutter open rebated and prepared to receive glass,gauze etc. without sash bars edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc complete all as specified and as directed. |
| 91 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples as in aluminium ventilators,complete all as specified. |
| 92 | S&F Aluminium floor door stopper (150 mm long) of aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as specified. |
| 93 | S&F M.S. rat tail helical door spring (150 mm long) including roller and roller plate complete all as specified. |
| 94 | S&F Sheet glass, ordinary quality 4.00 mm thk and glazing with oil putty in square not exceeding 0.5 sq m in each pane complete all as spd. |
| 95 | M&L for 4.80 mm thick sheet glass quality and glazing fixed to aluminium frame exc 0.50 sqm complete all as specified and as directed. |
| 96 | S&F figured sheet glass , ordinary quality 4.00 mm thick and glazing with oil putty in square not exceeding 0.5 sq m in each pane complete all as spd. |
| 97 | M&L for 4.80 mm thick frosted sheet glass quality and glazing fixed to aluminium frame exc 0.50 sqm complete all as specified and as directed. |
| 98 | M&L for preparation of new or previously untreated surface of wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed |
| 99 | S&F Vitreous china wash down water closet pan padestal pattern white, excluding fixing bolts, flushing cistern but including flush pipe, seat and cover complete, all as specified and as directed. |
| 100 | S&F PVC valveless, 10 ltrs, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified. |
| 101 | S&F Vitreous china WHB size 550x400mm including cutting or pinning in ends of brackets or erecting incl 32mm diawaste pipe complete all as specified. |
| 102 | S&F PVC connections 15 mm size with PTMT nuts of length 450mm complete all as specified and as directed |
| 103 | S&F Bib taps, 15 mm bore, CP cast copper alloy fancy type , screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 104 | S&F C.P. pillar tap, fancy type 15mm bore, cast copper alloy with capsten head screwed down high pressure with or without letter "Hot" or "Cold" with long screw shank and flt nuts screwed for iron pipe complete all as specified and directed |
| 105 | S&F 15mm bore stop valves, cast copper alloy, screweddown, highpressure, withcrutch or butterfly handle, screwed both ends foriron pipe orfor unions and fixed, complete all as specified |
| 106 | S&F 20mm bore stop valves, cast copper alloy, screweddown, highpressure, withcrutch or butterfly handle, screwed both ends foriron pipe orfor unions and fixed complete all as specified and as directed |
| 107 | S&F inC.P. Angle stop valve, fancy type, 15mm bore,cast copper alloy screwed down,high pressure,screwed both ends for iron pipe or unions complete all as specified. |
| 108 | S&F 15mm boreCP health faucet (ABS body) with 8mm dia ,1.2 mtr long flexible tube and wall hook complete all as specified and directed (Make - Jaquar, Cat No - ALD-CHR-593N) |
| 109 | S&F in repair 15mm boreCP wall mixer 3-in-1 system with provn for bath hand shower and overhead shower complete with 115mm long bend pipe , connecting Legs & wall flange (without hand & overhead shower) complete all as specified and directed (Make - Jaquar) |
| 110 | S&Ftubular towel rail, chromium plated, 60cm long between flanges, fixed complete all as specified and as directed |
| 111 | S&F600x450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified. |
| 112 | Supply hoisting and fixingrotational moulded HDPE water storage tank ,double layer ,ISI marked (cylendrical vertical type with closed top) of capacity 500 ltrs in position incl 20mm dia float valvehigh pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed incl dismantling of tank all as specified and directed. |
| 113 | S&F G.I. pipe 20mm bore tubing medium grade galvanised with all fitting fixed to wall, ceiling and laid in floors complete all as specified |
| 114 | S&F G.I. pipe 15mm bore tubing medium grade galvanised with all fitting fixed to wall, ceiling and laid in floors complete all as specified |
| 115 | S&F G.I. pipe 25mm bore tubing medium grade galvanised with all fitting fixed to wall, ceiling and laid in floors complete all as specified |
| 116 | M&L for concrete bed todrain pipes 110 boreincluding packing under, and haunching against the sides of pipes after they are laid and tested; in cement conctrete type D-2, 1:4:8 complete all as specified and as directed |
| 117 | S&FPVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed |
| 118 | S&FPVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, fixed to walls complete all as specified |
| 119 | S&FPVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified |
| 120 | S&FPVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, fixed to walls complete all as specified |
| 121 | PVC (SWR) floor trap, 75mm dia outlet, plain with grating including jointing with solvent cement complete all as specified |
| 122 | S&F PVC (SWR) 110mm bore bends any radius complete all as specified and as directed |
| 123 | S&F PVC (SWR) 75mm bore bends any radius complete all as specified and as directed |
| 124 | S&F PVC (SWR) 110mm bore bends any radius with access door complete all as specified and as directed |
| 125 | S&F PVC (SWR) 75mm bore bends any radius with access door complete all as specified and as directed |
| 126 | S&F PVC(SWR) 75mm dia vent cowls complete all as specified and as directed. |
| 127 | S&F Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays ,incl bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed. |
| 128 | M & L for preparation of new plaster surfaces of walls including cornices, pilasters etc and applying two coats of weather coat over a coat of primer complete all as specified and directed. |
| 129 | M&L for preparation of new wall surafces and applying two finishing coat of oil bound distempering over 1mm of wall care putty complete all as specified and as directed. |
| 130 | M&L for preparation of new wall surafces and applying two finishing coat of acrylic emulsion paint , anti fungal resistance , dirt resistance exterior paint of required shade including primer coat and 1 mm thk exterior putty on new surfaces complete all as specified and as directed. |
| 131 | M & L for construction of RCC septic tank for 20 users designed to carry sewage and sludge water, excavation in any type of soil, PCC 1:4:8 below foundation, vent shaft, connection etc with all fittings and fixtures complete all as specified and directed and shown in drawing No.TD/SZ/504 sheet 1/1 and as directed (Note: Rate quoted against ibid item shall be deemed to be included for all types of required works such as earthwork, PCC, Block walling etc) |
| 132 | S&F compound girders and stanchions,lattice girders ,aerial masts , staging for water tanks and the like incl caps, bases ,splices etc built up from two or more beam or channel sections or angles with plates including all lattice bars, stiffeners , gusset plates of Fe 290-W(Gde-E-165) etc complete all as specified and as directed |
| 133 | M&L cement concrete in surface channels and drains type C2 1:3:6 (40 mm graded aggregate ) complete all as specified and as directed. |
| 134 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitred/stopped ends etc complete all as specified and as directed |
| 135 | Supply hoisting and fixingrotational moulded HDPE water storage tank ,double layer ,ISI marked (cylendrical vertical type with closed top) of capacity 1000 ltrs in position incl float valvehigh pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixedall as specified and directed. |
| 136 | S&F 15mm bore gun-metal globe or gate valves,with iron wheel head ,screwed both ends for iron pipe and fixed complete all as specified and as directed |
| 137 | S&F 20mm bore gun-metal globe or gate valves,with iron wheel head ,screwed both ends for iron pipe and fixed complete all as specified and as directed |
| 138 | S&F 25mm bore gun-metal globe or gate valves,with iron wheel head ,screwed both ends for iron pipe and fixed complete all as specified and as directed |
| 139 | S&F Steel work in tublar trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade ST-240 complete all as specified and as directed |
| 140 | S&F iron angle for areal mast, water tank staging and the like incl caps , bases splices etc builtup from two or more beam or channel sections or angles with plates incl all lattice bars stiffers gussets etc of gde Fe-290(Gde E-165) complete all as specified and as directed |
| 141 | S&F Gl frame work for snapgrid false ceiling comprising of Gl perimeter channnel 0.55 mm thick with Main T- flange of 25 mm and web of 30 mm fixed to surrounding wall angle with flange and web 25 mm each , Cross T with flange 25 mm and web 25 mm fixed to mainT, Main T is suspended from soffit @ 1200 mmm c/c using GI wire of 4mm thickness GI frame will be 60 x 60 cm to recieve E-board ceiling complete all as specified and as directed . |
| 142 | M&L 4mm thick E Board 600x600 mmprepainted fibre boards ceiling designer/decorative type with different designs as approved by the Engr-in-chargefixed or laid in ceiling timber /GI/ aluminiumframe work in ceiling flat or sloping complete all as per manufacturer instruction. |
| 143 | S & F in repairs Vitreous China EWC with P or S Trap including seat cover closed pattern with flat bottom and cover and MS CP hinging device, PVC flush bend pipe incl PVC Flushing Cistern 10 LITRE capacity, Low Level Valve Less, Symphonic Action type, White, with Inlet, Ball Valve, Float and Handle including 32mm dia PVC Flush Pipe, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 including taking down unserviceable Flushing Cistern and connected Items of any description, complete all as specified and as directed. |
| 144 | S&F vitreous china bowl urinal flat back full stall type white (excluding flushing cistern flush pipe and waste pipe) complete all as specified and as directed |
| 145 | S&F fancy type CP single lever basin mixer without popup waste with 450mm long braided hoses of complete all as specified and as directed.make Jaguar Cat Part No:- KUP-35051BPM or equivalent in Marc/Parryware/Prayag |
| 146 | S&F Brass CP 2-in-1 Bibcock with flange of complete all as specified and as directedmake Jaguar Cat Part No:-ORP-10041PM ORequivalent in Marc/Cera/Parryware |
| 147 | S&F CP Soap dish holder of make Prayag Cat Part No:-BA-05 or equivalent in marc/parryware/prayag |
| 148 | S&F Towel ring sqare shape stainless steel of Make Jaguar Cat Part No:-AKP-35721P or equivalent in Marc/Parryware/Prayag |
| 149 | S&F corner glass shelf with bracket of make Jaguar Cat Part No:CAN-1173 or equivalent in Marc/Parryware/Prayag |
| 150 | S&F toilet roll holder with stainless steel of make Jaguar Cat Part No:- AKP-35755PS or equivalent in marc/parryware/prayag |
| 151 | S&Fbevelled edge mirror or selected quality glass, mounted on 6 mm thick AC building board or commericial ply wood and fixed to wooden plugs with CP brass screw and cup washer complete all as specified and as directed.. |
| 152 | S&F cutting chases, pinning in concrete block workmaking good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth complete all as specified and as directed. |
| 153 | S&Fin repairs vitreous China clay WHB flat back size 450x300 mm incl pedastal , PVC waste pipe 32 mm dia, waste coupling brackets etc complete all as specified and as directed. |
| 154 | S&F in repairs Soap dish vitreous china white, approximate size 160x160x90mm complete all as specified and as directed. |
| 155 | S&F in repairs Brass chromium plated bottle traps 32 mm dia for wash basins with inlet and outlet screwed for pipe or connections incl necessary packing uniun and cap complete all as specified and as directed. |
| 156 | S&F Stack clamps out of 75mm by 5mm flat iron and 16mm dia round iron stays ,incl bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed. |
| 157 | M&L for french polishing on surface of any description, width or girth incl preparation of the surface incl a coat of wood filler on the new work with two or more coat complete all as specified and directed. |
| 158 | M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry with gray cement and pigment in floors over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified and as directed. |
| 159 | S & F in repairs Vitreous China EWC including seat cover closed pattern single piece size 755x365x655 complete of make Jaguar Cat Part No :- LYS-WHT-38851PSM or equivalent in make cera, parryware or Hindware |
| 160 | S & F in repairs Towel rack 600mm long with lower hangers , stainless steel of make Jaguar Cat Part No:-AKP-35781PS or equivalent in Marc/Parryware/Prayag |
| 161 | S&F in repair fancy type tall body with 155 mm extension body fixed spout without popup waste system with 600 mm long braided hoses of make JaquarCat Part No:- KUP-35005BPM or equivalent in Marc/Parryware/Prayag |
| 162 | S&F in repairs bevelled edge mirror or selected quality glass, mounted on 6 mm thick AC building board or commericial ply wood and fixed to wooden plugs with CP brass screw and cup washer complete all as specified and as directed. |
| 163 | S&F in repairs 20 mm diaharrison rails, chromiun plated with wooden finished fancy type with fixing brackets stops , rollers etc all as directed and specified. |
| 164 | S&F in repairs 20 mm dia double rod brackets stops , rollers etc wooden finished all as directed and specified. |
| 165 | S&F in repair CP Bib taps, cast copper alloy fancy type , screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 166 | S&Fin repairs vitreous China clay table top WHB of make Jaguar Cat Part No:-ARS-WHT-39601 of size 635x430x190 mm incl waste coupling Cat Part No:-ALD-727 complete or equivalent in Hindware/Cera/Parryware complete all as specified and as directed. |
| 167 | S&F in repairs Brass CP 2-in-1 Bibcock with flange of make Jaguar Cat Part No:-ORP-10041PM ORequivalent in Marc/Cera/Parryware complete all as specified and as directed. |
| 168 | S&F in repairs Soap dish holder of make Jaguar Cat Part No:-AKP-35731P or equivalent in Marc/Parryware/Prayag complete all as specified and as directed. |
| 169 | S&Fin repairs Toilet roll holder with stainless steel flap of Make Jaguar Cat Part No:- AKP-35753PS OR EQUIVALENT IN Marc/Parryware/Prayag |
| 170 | S&Fin repairs Towel ring sqare shape stainless steel of Make Jaguar Cat Part No:-AKP-35721P or equivalent in Marc/Parryware/Prayag complete all as specified and as directed. |
| 171 | S&F in repairscorner glass shelf with bracket of make Jaguar Cat Part No:CAN-1173 or equivalent in Marc/Parryware/Prayag complete all as specified and as directed. |
| 172 | S&Fin repairs CP over head shower square shape of size 150x150mm of make Jaquar cat part No:OHS-CHR-1619 with CP shower arm of size400x25x25 mm square shape for wall mounted showers flange of make Jaquar Cat partNo-SHA-455L400 or equivalent in Prayag/Hindaware/parryware complete all as specified and as directed. |
| 173 | S&FCP Hand shower 24x24 mm sqaure shape single flow with Air effect (ABS body & face plate chrome plated) with Rubit cleaning system of make Jaquar cat part No:HSH-35537 with flexible tube in chrome finish 1.5 m long with nuts of make Jaquar cat part No:SHA-571 or equivalent in Parryware/Prayag/Ceracomplete all as specified and as directed. |
| 174 | S&F in repairs Brass CP angular stop cock fancy type with Capstan heads of make Jaguar/Marc/Parryware complete all as specified and as directed. |
| 175 | M&L for 18/19 mm thk WPC (wood Plastic composite)board of grade 1 quality exterior grade complete all as specified and as directed |
| 176 | M&L for 12 mm thk for block board grade 1 quality exterior grade decorative face with veneers on one faces complete all as specified and as directed |
| 177 | M&L for decoratives PVC laminates type I or surface finish colour and pattern as approved of thickness 1.20 mm complete all as specified and as directed |
| 178 | S&F edge beading of WPC board fixed with nails and adhesives complete all as specified and as directed |
| 179 | S&F in repairs lever sink mixer with swinging spout on upper side (wall mounted model ) with connecting legs & wall flanges of make Jaquar cat part No:LYR-38165 or equivalent in Parryware/Cera/Prayag complete all as specified and as directed. |
| 180 | S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever barackets and connecting union to pipe overall size 495mmx420mm bowl size 410mmx330mmx160mm complete all as specified and as directed. |
| 181 | S&F Stainless steel kitchen plate rack of size 31" X 30" X 10" made out of stainless steel sheet of 1.00 mm with all accessories including taking down old unservicable rack (Make : Swastik, Anjali,Blue star,Prayag or equavalent complete all as specified and as directed. |
| 182 | S & F Vitreous china squatting pan of pattern "long pan" size 580 mm white with "P" or "S" trap front or back inlet and foot rests, any pattern (excluding flushing cistern and flush pipe) complete all as specified and as directed. |
| 183 | M& L for3mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed.. |
| 184 | M&L for roof truss ( framed), trussed , purlin etc. of angle or other section for fixing of sheets and similar works complete of Gde Fe-290(Gde E-165) all as specified and as directed |
| 185 | E & M PART - II SCHEDULE Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, PVC conduit not less than 20 mm dia with accessories, concealed on wall/ceilingand incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductorgreen colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitable modular or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer bothinternally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washersand making goodthe disturbed surfaces as per existingfor one light point controlled by one switch. Note :- Switch, socket and fan regulators to be measured and paid for separately . PVC Conduit confirming to IS 9537 part I & III Note (All chases will be cut by chase cutter only) |
| 186 | Description all as per Srl item No.185 abovebut for socket outlet point 5 Amp on same board. |
| 187 | Description all as per Srl item No.185abovebut for socket outletpoint 5 Amp on Independent board. |
| 188 | Description all as per serial item No 185above but with 4 sqmm cablefor 3 pin 15 Amps switch socket outlet (Power point) complete all as specified. |
| 189 | Supply and fix switch piano (ISI marked) Single pole 240 volts,5Amps all as specified and directed. Make- Havells/anchor/ Legrand. |
| 190 | Supply and fix switch socket combination (ISI marked) 2/3 pin and 5 Amps, flush type, 240 volts complete all as specified and as directed. Make- Havells/anchor/ Legrand. |
| 191 | Supply and fix switch socket combination (ISI marked) 2/3 pin and 5/15 Amps, flush type, 240 volts complete all as specified and directed. Make- Havells/anchor/ Legrand. |
| 192 | Supply and fixing modular switch 1 way 6A module 230/250 volt , AC supply,ISI Marked, with white cover plate with frame complete all as specified and directed. Make:Cona , Plaza, Anchor, Vinay |
| 193 | Supply and fixing modular switch 1 way 16A module 230/250 volt , AC supply,ISI Marked, with white cover plate with frame complete all as specified and directed. Make:Cona , Plaza, Anchor . |
| 194 | Supply and fixing modular sockets 6A/16A 2/3 pin combined 2 module 230/250 Volts,50 Hz , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed.ake:Cona , Plaza, Anchor, Vinay |
| 195 | Supply and fixing modular sockets 6A2/3 pin combined 2 module 230/250 Volts,50 Hz , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed.ake:Cona , Plaza, Anchor, Vinay |
| 196 | Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified. Make:Cona , Plaza, Anchor . |
| 197 | Supply and fixing LED lights fitting 1x 10W, 220V,AC decorative box type, warm white / white typewith driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose completecomplete pre wired fixed to wallwith 2 nos PVC block of suitable size complete all spcifided and directed. |
| 198 | Supply and fix MCB Distribution board , 240 volts single pole andneutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 8 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, complete all as specified and directed. Make: Havells Cat part No DHDPSHODRW12 or equivalent in Schnieder/GE/C&S. |
| 199 | Supply and fix MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity "C" seriescomplete all as specified and directed. |
| 200 | Supply and fix in repairs MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB"s complete all as specified and as directed. |
| 201 | Supply lay/spread in trenches , river sand ,clean ,including spreading ,levelling ,punning for laying /cushioning of cables all as specified and as directed. |
| 202 | Supply lay in trenches fly ash bricks, old size sub class “B” disignation for cable protection complete all as specified and as directed.. |
| 203 | Supply, lay in trenches, floors ,fix on wall/pole, passing through pipes etc.,LT UG cable , 1100 volts grade, PVC/ XLPE insulated , with multistrandedaluminium conductors, armoured with galvanised steel wire or tape ,gland, lugs etc, of size 10Sq.mm 2 core , confirming to IS specificationscomplete all as specified and as directed.. |
| 204 | Supply and fix on pole / wall or lay in trenches under road / drain crossingsetc., for drawing cables, GI pipe light grade ,,ISI marked ,offollowing sizes including necessery pipe , fittings ,clamps, bolts , nuts etc complete all as specified and as directed.. |
| 205 | Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways andone handle for lifting made out of 8 mm dia TMTbar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I complete all as specified and as directed.. |
| 206 | Supply and fixing LED lights fitting 1x 18W, 220V,AC decorative box type, warm white / white type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose completecomplete pre wired fixed to wallwith 2 nos PVC block of suitable size complete all spcifided and directed. |
| 207 | S & F Mirror wall mounted LED batten fittings with all accessories 1X 12 Watt LED 6000K, warm white / white type extruded polycarbonate, integrated electronic driver and fixed to wallcomplete all as specified and as directed Make- Philips cat Part 31403 12-Watt LED picture Light (Gold) |
| 208 | S & F Wall bracket decorative LED fitting 2 light opal glass with chrome finishing warm white /white type with lamp12 Watt complete with necessary connection complete Make- Jaquar Cat part KCH-CHR-MB160275532B |
| 209 | Supply and fixing LED security Buildinglight LED 25 Watt, pressure die cast aluminum housing, heat resistant glass, IP65 protection, better optics for uniform distribtion complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of lightcomplete.Make Make:- Bajaj Cat part No- 169821 LED/CG as perr vat No LSTO 25 CDLequivalent model as in Surya / havells . |
| 210 | S & F Slim desingn LED recessed round/square type down lighter 12 watt warm white / white type flat panel PDC aluminium housing and PMMA diffuser all as directed and specified Make- CG Cat Part No- LCDEP-12-WW |
| 211 | S & F recesss mounted low glare luminaire 28 Watt PLUTO NEO 2 X 2 complete warm white / white with all accessories complete all as specified and as directed..Make HAVELLS /Philips/Bajaj/CG |
| 212 | S&F lamp holder, insulated body, with back plate for batten fittingcomplete all as specified and as directed... Make- Havells/anchor/Legrand. |
| 213 | M & L Sub main wiring with two runs of single core 6 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia concealed on wall/ceiling in PVC conduit, medium gradeISI markedwith all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall along with one run of6 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion including taking down old wiring etc complete all as directed. Note: (i) Two runs of 6 sqmm as PVC cable and one run of6 sqmm as earth wire and one run of PVC conduitshall be measured as one RM. (ii)Cutting of chases in the wall of appropriate size shall be carried out with electric cutter machine . (iii) Necessary plastering in the disturbed surface of wall and distempering /white washing to match the existing colour shall be included in the unit rate quoted. |
| 214 | S & F Exhaust fan 230 volts , 300mm, heavy duty steel body includingmaking all electric connection complete all as specified and as directed including cutting of hole on wall and making good disturbed surface of wall and outer wooden box for fan fix on wallMake Bajaj/Havell"s/CG. |
| 215 | S & F Exhaust fan 230 volts , 250mm,plastic body includingmaking all electric connection complete all as specified and as directed including cutting of hole on wall and making good disturbed surface of wall and outer wooden box for fan fix on wallincluding taking down old one Make Bajaj/Havell"s/CG. |
| 216 | S & F Exhaust fan 230 volts , 300mm,plastic body includingmaking all electric connection complete all as specified and as directed including cutting of hole on wall and making good disturbed surface of wall and outer wooden box for fan fix on wallMake Bajaj/Havell"s/CG. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
