Rashtriya Madhyamika Shiksha Abhiyana-RMSA has published Construction Of Additional Accommodation Three Storey Building And Renovation Of Old Twelve Roomed Three Storey Building For Girls Hss Sopore District Baramulla.. Submission Date for this Tender is 27-09-2022. Building Work Tenders in baramulla Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 metersand lift upto 1.5 m, as directed by Engineer-in-Charge.2.7.1 All kinds of soil |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 3 | Supplying and filling in plinth with fine sand under floors including watering, raming consolidation and dressing complete |
| 4 | providing supplying and stacking of soling including laying ramming complete as per engineer incharge |
| 5 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in super structure including all carriages |
| 6 | providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: M20 (1:1.5:3) |
| 7 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:M7.5 (1:4:8) |
| 8 | providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:M15 (1:2:4) |
| 9 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses and string courses, fillets, columns, pillars, piers, abutments, posts, Suspended floors, beams, Cantilevers and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. M20 (1:1.5:3). |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases for columns, Pedestal. |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form for Columns, piers, abutments, pillars, posts and struts and beams and slabs. |
| 12 | 6-12mm Cement plaster of mix: on walls 1:4 mix. |
| 13 | 15mm Cement plaster on the rough side of single or half brick wall of 1:6 mix: |
| 14 | Providing and laying antiskid vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and hades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete 600x600mm |
| 15 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete 1"x1".5" |
| 16 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : 11.66.1 Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 17 | Providing and fixing Structural steel work in built up sections, trusses and framed work incl Ms sheet for soffits and evaes boarding, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 18 | Providing and fixing with High rib colour coatedGS sheet roofing including vertical/curved surface including polymer coated J. or L hooks,fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead,0.50 mm thick |
| 19 | Providing ridges or hips of width 60cm overall width plain G.S. sheets 0.5 mm fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. |
| 20 | Steel reinforcement for R.C.C. work ready to use "cut and bend" rebars of approved make from factory/workshop to construction site including placing in position and binding all complete above plinth level. 5.22C.1Thermo-Mechanically Treated bars of grade Fe-415 or Fe-500D or more as per requirement ofstructural Design. |
| 21 | Providing and applying wallputty of 2mm thickness over plastered surface to prepare the surface even and smooth complete |
| 22 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications:13.57.1 Two or more coats applied @ 1.25 liter/10sqm over and including one coat of pecial primer applied @ 0.75liter /10sqm |
| 23 | Finishing walls with exterior paint of required shade on New work (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @ 2.20kg/10sqm |
| 24 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 25 | Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly einforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps andecessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. ( Including cost of toughnedglass panes as approved by engineer in charge) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 26 | Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed/panneled door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles dulyforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Including cost of Toughned glass panes/Panel of approved/desired specification and silicon sealent). Note: For uPVC frame, sash and mullion Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate. |
| 27 | Sanitary and Plumbing Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. |
| 28 | PN-16 pipe , Above 16-20mm OD(SDR-7.4) |
| 29 | PN-16 pipe , Above 20-25mm OD(SDR-7.4) |
| 30 | PN-16 pipe , above 25 mm -32mm OD(SDR-7.4) |
| 31 | Providing and fixing PPR Unions |
| 32 | PPR Union 20mm |
| 33 | PPR Union 25mm |
| 34 | Providing and fixing ball valve (brass) of approved quality, High or lowpressure, with plastic floats complete |
| 35 | 15-20 mm nominal bore |
| 36 | 25 mm nominal bore |
| 37 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 38 | C.P. BRASS FITTINGSProviding and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. |
| 39 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 40 | Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg. |
| 41 | Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC mediumpipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings and assories like tees ,elbows ,collars,cowls ,ptraps,s traps ,door bends etc all complete for all depths as per direction of Engineer-in-charge. |
| 42 | 75 mm nominal size dia |
| 43 | 100 mm nominal size dia |
| 44 | Providing and fixing of 1 hp unidirectional flow motor of kirloskar make and as per relvan IS specifications including all fittings complete as per Engineer incharge |
| 45 | Constructing masonry Chamber of specified size, in brick work with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 (1cement :4 coarse sand) and R.C.C. top slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) including necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand : 10 graded stone aggregate 40 mm nominal size) andnside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design. |
| 46 | Providing and fixing water closet squatting pan (Indian type W.C. pan/European as required ) as desired with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. |
| 47 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls whereverequired : ,White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. |
| 48 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 49 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 50 | Providing,and fixing of foundation stone and inaugration stoneincl curtains with curtain rods and necessary ancillary items required at site and directed byengineer incharge at site(foundation and inaugration comprises of two jobs) |
| 51 | Dry random rubble masonry with hard stone in foundation and plinth: With bond stone |
| 52 | Supplying and fixing the following sizes of Rigid Pvc conduites 1.8 mm thick complete with accessories such as bends,junction boxes, pull boxes andetc |
| 53 | 25 mm nominal dia RIGID PVC conduits |
| 54 | Fan Boxes |
| 55 | Lighting Boxes (Deep) |
| 56 | Carriage of material from various sources to site of work avg lead in Kms |
| 57 | Cement -5 kms |
| 58 | Sand -55 Kms |
| 59 | Aggregate -15 Kms |
| 60 | Bricks - 50 Kms |
| 61 | steel -15 kms |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
