1 Supply, Providing And Fixing Of Aerolite / Ramco Calcium Silicate False Ceiling Supply, Providing And Fixing Of Aerolite / Ramco Calcium Silicate False Ceiling. Material: 8Mm Thick Integral Densified Micro Edged Light Weight Calcium Silicate Fal, Kanyakumari-Tamil Nadu

1 Supply, Providing And Fixing Of Aerolite / Ramco Calcium Silicate False Ceiling Supply, Providing And Fixing Of Aerolite / Ramco Calcium Silicate False Ceiling. Material: 8Mm Thick Integral Densified Micro Edged Light Weight Calcium Silicate False Ceiling Tiles With Integral Densified Calcium Silicate Reinforced With Fibre And Natural Filler False Ceiling Tiles Of Size 595X595 Mm Of Approved Texture, Design And Patterns Having Nrc ( Noise Reduction Coefficient ) Of 0.50 ( Minimum ) As Per Is 8225:1987, Light Reflectance Of 85% ( Minimum ) . Non Combustible As Per Bs: 476 ( Part-4 ) , Fire Performance As Per Bs:476 ( Part 6 &7 ) , Humidity Resistance Of 100%, Thermal Conductivity. As Per Sl.No 1 Of Scope Of Work 2 2 Supplying, Providing & Fixing Of Upvc Window Specification: Supplying And Fixing Upvc Supplying, Providing & Fixing Of Upvc Window Specification: Supplying And Fixing Upvc ( Un-Plasticized Polyvinyl Chloride ) Windows Of Casement ( Open ) / Sliding Type From The Profile The Size Of Outer Frame 60Mm X 58Mm And Shutter Profile Are Reinforcement With Gi / 1Mm 125Gsm And 100% Corrosion Free, The Profiles Are Multi Chambered Sections With Wall Thick Of 2Mm. The Epdm Rubber ( Black Colour ) Covered With Over All The Edges Of Frame And Shutter The Shutter Will Be Provided With Espag Multi Power Point Locks And Also It Operates As Handle. As Per Sl.No.2 In Scope Of Work 3 3 Supplying, Providing And Fixing Of Upvc Un-Plasticized Polyvinyl Chloride Door Supplying, Providing & Fixing Of Upvc ( Un-Plasticized Polyvinyl Chloride ) Door: Providing And Fixing Casement ( Open ) / Sliding Doors Fabricated From Un-Plasticized Polyvinyl Chloride ( Upvc ) Sections. Profiles: The Profiles Should Be Three Chamber System Which Provides High Insulation Properties With Outer Frame 60Mm X 55Mm With An Outer Wall Thickness Of 2.4Mm. The Window Unit Should Be Designed With All Corner Joints Mitred And Fusion Welded. Windows Should Be Steel Reinforced With 25 X 24 X 25Mm Steel Reinforcement With A Thickness Of 1Mm To Have Dimensional Stability. The Sash Should Be Of 60 X102mm. The Mullion Should Be Of 60 X 74Mm. The Profiles Should Have Co-Extruded Seals. Hardware: All The Hardware Like Friction Stays, Handles Should Be Screwed With Self Tapping Screws. 4 4 Supplying, Providing And Fixing Of Aluminium Composite Panel Supplying, Providing And Fixing Of Aluminium Composite Panel ( Acp ) 4 Sided Having 50 X 25 X 1.50Mm Frame Work Vertical And Horizontals Out Of Specially Designed Extruded Sections Withstand Wind Pressure Of 180 Kg / Sq.M And Fabricated Fixed At All Level Elevation / Interior / Exterior Wall Panel And Height Upto 15M. The Extruded Section Cutting And Fixing Required Space Extruded Section Shall Be Of 6063 And Alloy Of Bsh 9 Confirming T Is 63400 Rate Shall Included To Fix The Main Frame With Necessary Clamps, Fasteners, Bolt Nuts Etc As Per Sl.No.4 In Scope Of Work 5 5 Supplying, Providing And Fixing Frp Chequered Plate Supplying, Providing And Fixing Frp Chequered Plate ( Yellow / Green / Grey Colour ) Of 10Mm Thick Flooring Over A Steel Structural Surface At Mcc Electrical Control Room And Fixing With Suitable Bolt & Nuts With Washer, Fastener With Necessary Arrangements And Proper Levelling With Neat Finishing, Etc. Rates : The Rate Shall Include The Cost Of All The Materials And Labor Involved In All The Operation Described Above Including Scaffolding Etc, If Any Required Etc. Complete As Per Standard Specification And As Per The Direction Of Engineer In-Charge. 6 6 Fitter For Miscellaneous Works Fitter For Miscellaneous Works Such As Dismantling Of Existing Doors, Windows, Floor, Side Cladding, Etc. As Per The Direction Of Engineer-In-Charge. ( Rate Excluding The Cost Of Materials ) .. 7 7 Labour Mazdoor For Miscellaneous Works Labour ( Mazdoor ) For Miscellaneous Works Such As Dismantling Of Existing Doors, Windows, Floor, Side Cladding, Etc. As Per The Direction Of Engineer-In-Charge. ( Rate Excluding The Cost Of Materials ) .

Refer document

Refer document

Refer document