Public Works Department-PWD has published Setting Up And Construction Of Building For One Stop Center In Yanam ( Osc ) .. Submission Date for this Tender is 21-09-2022. Building Work Tenders in yanam Andhra Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | 2.6.1 Earth work in excavation by mechanicalmeans (Hydraulic excavation) / manual means over areas (exceeding 30 cm in depth, 1.5min width as well as 10sqm on plan) including getting out anddisposal ofexcavated earth, lead upto 50m and lift upto 1.5m - all kinds of soil. |
| 2 | 2.25 Filling available excavated earth(excluding rock)in trenches, plinth, sides of foundations etc. in layers not exceeding20cm in depth, consolidating each deposited layer by ramming and watering, lead upto50m and lift upto 1.5m. |
| 3 | 2.27 Supplying and filling in plinth with river sand under floors, including watering, ramming consolidating and dressing complete. |
| 4 | 4.1.10 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all workupto plith level - 1:5:10 (1 cement : 5coarse sand : 10 graded stone aggregate40mm nominal size). |
| 5 | 5.9.1 Centering and shuttering including strutting, propping etc and removal of orm for - foundations, footings, bases of columns etc for mass concrete. |
| 6 | 5.9.6 Centering and shuttering includingstrutting , propping etc and removal of form for - Columns , Pillars , Piers ,Abutments , Posts and Struts. |
| 7 | 5.9.3 Centering and shuttering including strutting, propping etc and removal of form for - Suspended floors, roofs, landings, balconies and access platform. |
| 8 | 5.9.5 Centering and shuttering including strutting, propping etc and removal of form for - Lintels, beams, plinth beams, girders, bressumers and catilevers. |
| 9 | 5.1.2 Providing and laying in position specifiedgrade of reinforced cement concrete , excluding the cost of centering, shuttering, finsishing and reinforcement -All work upto plinth level 1:1.5:3 (1cement1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 10 | 5.2.2 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and sting courses, fillets columns, pillars , piers, abutments posts and struts etc.upto floor five level excluding cost ofcentering , shuttering, finishing and reinforcement - 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). |
| 11 | 5.3 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15degree landings , balconies , shelves,chajjas , lintels , bands , plain window sills , staircases and spiral stair cases upto floor five level excluing the cost ofcentering ,shuttering, finishing andreinforcement, with 1:2:4 (1 cement : 2coarse sand : 4 graded stone aggregate 20mmnominal size). |
| 12 | 5.34.1 Extra for providing richer mixes at all floor levels - Note:- Excess / less cement over the specified cement content used ispayable / recoverable separately -Providing M-30 grade concrete instead ofM-25 grade BMC / RMC . (Note:- cement content considered in M-30 is @ 340 kg /cum) |
| 13 | 5.14 Providing , hoisting and fixing upto floor five level precast reinforced cement concrete in mouldings as in cornices ,windows sills etc. including setting in cement mortar 1:3 (1 cement : 3 coarse sand) cost of required centering, shuttering but excluding the cost of reinforcement, with 1:2:4 (1 cement : 2coarse sand : 4 graded stone aggregate 20mm nominal size). |
| 14 | 5.22.6 Steel reinforcement for R.C.C.work including straightening , cutting , bending , placing in position and binding all complete upto plinth level - Thermo –Mechanically treated bars (TISCON/VIZAG/ IISCO/SAIL/ JSW) Fe-415 or more. |
| 15 | 5.22A.6 Steel reinforcement for R.C.C.work including straightening , cutting , bending placing in position and binding all complete above plinth level - Thermo - Mechanically Treated bars (TISCON / VIZAG /IISCO / SAIL / JSW) Fe - 415 or more. |
| 16 | 6.1.2 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in - cement mortar 1:6 (1 cement : 6 coarse sand). |
| 17 | 6.4.2 Brick work with common burnt clay F.P.S (non modular ) bricks of class designation 7.5 in superstructure above plinth levelupto floor five level in all shapes and sizes in - cement mortar 1:6 ( 1 cement : 6 coarse sand). |
| 18 | 9.1.2Q Providing wood work in frames of doors , windows, clerestory windows and other frames, wrought framed and fixed inposition with hold fast lugs or with dash fasteners of required dia & length (holdfast lugs or dash fastener shall be paidfor separately) Vegesa/Bandaru wood. |
| 19 | 9.6.2 Providing and fixing 35mm thick factorymade laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15 : 2001 (Part B) , including ISI marked M.S. pressed butt hinges bright finished ofrequired size with necessary screws, all complete and panelling with panels of -12mm thick pre - laminated particle board (decorative lamination on both sides) grade 1, medium density flat pressed, three layer particle board FPT - I or graded wood particle board FPT - I , conforming to IS : 3087 , bonded with BWP type synthetic resin adhesive as per IS : 848 and prelaminatedconforming to IS : 12823, Grade 1, type - II marked. |
| 20 | 9.5.1.1Q Providing and fixing panelled or panelledand glazed shutters for doors, windows, and clerestory windows, including ISI markedM.S.pressed butt hinges bright finished ofrequired size with necessary screws, excluding panelling which will be paid for separately, all complete - Vegesa / Bandaru wood - 35 mm thick shutters. |
| 21 | 9.7.1Q Providing and fixing panelling or panellingand glazing in panelled or panelled and glazed shutters for doors, windows andclerestory windows (area of opening forpanel inserts excluding portion insidegrooves or rebates to be measured). Panelling for panelled or panelled andglazed shutters 25 mm to 40 mm thick - Vegesa / Bandaruwood. |
| 22 | 9.62.1R Providing and fixing ISI marked powdercoating sliding door bolts with nuts and screws etc.complte - 300 X 16 mm. |
| 23 | 9.62.2R Providing and fixing ISI marked powder coating sliding door bolts with nuts and screws etc. complte- 250 X 16 mm |
| 24 | 9.70.1 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc.complete - 125 x 64 x1.90 mm. |
| 25 | 9.63.3R Providing and fixing ISI marked powder coating tower bolt black finish(Barrel type) with necessary screws etc.complete -200 x10 mm |
| 26 | 9.124.1 Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of size 75 mm X 30 mm having wall thickness 5 mm. The styles, top & bottom rails shall have one side wall thickness of 15 mm integarally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforcedwith M.S. tubes of size 33 mm x 17 mm x 1 mm , painted with primer , all four corners of reinforcement to be welded or sealed . Solid PVC extruded bidding (push fit type) will be set inside the styles and the rails with a cavity, to recive single piece extruted 5 mm PVC sheet as panel. The joint with the help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rail of size100 mm X 30 mm with wall thickness 5 mm &15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement and self drivenself tapping screws of size 100 mm x 8mm complete as per manufacturer"s specifications - Non decorative finish. |
| 27 | 10.17 Providing and fixing M.S. fan clamp type I or II of 16mm dia M.S. bar, bent to shape with hooked ends in R.C.C.slabs or beams during laying , including painting the exposed portion of loop, all as perstandard design complete. |
| 28 | 10.25.2 Steel work welded in built up sections /framed work , including cutting,hoisting,fixing in position and applying a priming coat of approved steel primer usingstructural steel etc. as required - in gratings, frames, guard bar, ladder, railings, brackets,gates and similar works. |
| 29 | 11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by themanufacturer) , of approved make , in all colours , shades except burgundy , bottle green , black of any size as approved in skirting , risers of steps and dados, over 12mm thick bed of cement mortar 1:3 (1cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement with pigment of matching shade complete. |
| 30 | 11.41.2C Providing and laying fully vitrified floor tiles of size 600 x600 mm (thickeness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 of approved make (Nitco/Rak/ Johnson / Asian) in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement :4 coarse sand) , includinggrouting the joints with white cement and matching pigments etc., complete - size oftile 600x600mm - Commercial quality. |
| 31 | 12.41.2 Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS: 13592Type A, including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermalexpansion, (i) Single socketed pipes - 110mm diameter. |
| 32 | 12.42.5.2 Providing and fixing on wall face unplasticised - PVC moulded fittings /accessories for unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion -bend 87.5 degree - 110 mm bend. |
| 33 | 12.42.6.2 Providing and fixing on wall faceunplasticised - PVC moulded fittings /accessories for unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion -shoe (plain) -110mm shoe . |
| 34 | 13.1.2 12mm cement plaster of mix -1:6( 1 cement: 6 fine sand) |
| 35 | 13.2.2 15mm cement plaster on the rough side of single or half brick wall of mix - 1:6(1cement : 6 fine sand) |
| 36 | 13.9.2 Cement plaster 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neatcement - 20mm cement plaster |
| 37 | 13.16.1 6mm cement plaster of mix 1:3 (1 cement : 3fine sand) |
| 38 | 13.48.1 Finishing with deluxe multi surface paint system for interiors and exteriors using primer as per manufacture"s specification -Two or more coats applied on walls @ 1.25 ltr / 10 sqm over and including one coat of special primer applied @ 0.75 ltr / 10 sqm. |
| 39 | 13.61.1 Painting with synthetic enamel paint of approved brand and manufacutre to give an even shade - Two or more coats on new work. |
| 40 | 16.96 Supplying fixing and commisioning of Suguna/ Texmo / Sharp 2 HP monoblock pumpset slow speed single phase motor. The rate includethe cost of pumpset, pumpset fixing in position and test run etc. complete. |
| 41 | 17.1.1 Providing and fixing water closet squatting pan (Indian type W.C.pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C flusing cistren, including flush pipe , manually controlled device (handle lever) conforming to IS : 7231 , with all fittings and fixtures complete ,including cutting and making good the wallsand floors wherever required. White vitreous china Orissa pattern W.C.pan of size 580x440mm with integral type foot rests. |
| 42 | 17.2.1 Providing and fixing white vitreous china pedestal type water closet (European type W.C.pan) with seat and lid, 10 litre lowlevel white P.V.C. flusing cistern, including flush pipe, with manually controlled device (handle lever),conforming to IS: 7231,with all fittings and fixtures complete, including cutting and making good the walls and floorswherever required - W.C. pan with ISImarked white solid plastic seat and lid. |
| 43 | 17.7.4 Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32mm C.P.brass waste of standard pattern , including painting of fittings and brackets, cutting and making good the walls wherever required - white vitreous china flat back wash basin size 550x400 mm with single 15mm C.P. brass pillar tap. |
| 44 | 17.78.1 Providing and fixing CP brass health faucet of approved quality- 15 mm nominal bore. |
| 45 | 18.8.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing ofpipes & fittings , with one step CPVCsolvement cement and the cost of cutting chases and making good the same including testing of joints complete - Concealed work , including cutting chases and making goodthe wall etc - 32 mm nominal outer diapipes. |
| 46 | 18.9.1 Providing and fixing Chlorinated PolyvinylChloride (CPVC) pipes, having thermalstability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete - external work - 15mm nominalouter dia pipes |
| 47 | 18.9.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement trenching, refilling & testing of joints complete - external work - 20mm nominalouter dia pipes. |
| 48 | 18.48A Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI: 12701 marked , with cover andsuitable locking arrangement and makingnecessary holes for inlet, outlet andoverflow pipes but without fittings and the base support for tank - Circular Tank. |
| 49 | 18.50.1 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms - 15mm nominal bore. |
| 50 | 19.33.1 Providing and fixing on wall / column face unplasticed - PVC soil and waste pipes (type - B) conforming to IS : 13592- 1992 including jointing with seal ringconformation to IS : 5382 leaving 10mm gapfor thermal expansion -single socked pipes -110mm diameter. |
| 51 | 19.33.1A Providing and fixing on wall face / columnface unplasticised - PVC moulded fittings / accessories for unplasticisd - PVC soil and waste pipes conforming to IS : 14735 -1999including jointing with seal ringconforming to IS : 5382 leaving 10mm gap for thermal expansion - Single tee withdoor - 110 x110x110 mm. |
| 52 | 19.33.1C Providing and fixing on wall face / columnface unplasticised - PVC mould fittings /accessories for unplasticisd - PVC soil andwaste pipes conforming to IS : 14735 – 1999 including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion - bend 110 mm. |
| 53 | 19.33.2 Providing and fixing on wall / column face unplasticised - PVC soil and waste pipes(type B) conforming to IS :13592 - 1992including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion -Single socketed pipes 75mm diameter |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
