|
| 1 | open jim sthapana |
| 2 | Earth work in cutting in embankment in ordinary soil excavation to be in the form of regular pits not exceeding 0.50 M in depth and earth work in embankment to be in 20cm layers including ramming & dressing the surface to required level & slopes and also including 1.50M lift and 30 M lead the earth from cutting to be used in making embankment or to be deposited as spoil bank within 30 Mtr. distance as directed by E/I. (Earth to be spread evenly in the undulation in working area) (PWD SoR-2015,253) |
| 3 | Cement concrte with 40 mm gauge approved stone ballast, coarse sand and cement in proportion of 8:4:1 including supply of all material, labour, tools & plant etc required for proper completion of work. Excluding GST (PWD SoR-2018,281) |
| 4 | Cement Concrete with 20 mm gauge approved stone grit, coarse sand and cement in proportion of 1:1.5:3 including supply of all materials, Labour, tools & plant etc required for proper completion of the work. Excluding GST(PWD SoR-2018,279(B)) |
| 5 | 40 mm thick fine dressed red sand stone flooring (size of red sand stone slab should not be less than 500mm x 500mm) over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand), including pointing with cement mortar 1:2 (1 cement : 2 stone dust) with an admixture of pigment to match the shade of stone.(flooring pattern should be as per design and as directed by Engineer in Charge)(DSR-2016,11.29.1) |
| 6 | Extra for pre finished nosing in red sand stone slab.(DSR-2016,11.31) |
| 7 | Providing and fixing G.I. wire of 4 mm dia. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.(Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade)(DSR-2016,16.70.2) |
| 8 | Supplying and fixingof G.I pipe of 50 mm dia as directed by engineer in charge(DSR-2016,1550) |
| 9 | Painting G.I. pipes with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work(DSR-2016,18.38.6) |
| 10 | S/F of Smart City branding signage made of stainless steel plate of size 750X300 mm, 2 mm Gaugeincluding Letters engraved 1 mm deep & painted in the sheet fixed with 2 numbers of 1 m height CP pole of 50 mm dia and fixed with cement concrete as per design and drawing complete in all respect as directed by engineer in charge. |
| 11 | Supplying and Fixing of cast iron antique style bench having weight of sides not less than 72 kg (36 kg each) fitted with fibre rectangle strip (should not be less than 50 mm X 25 mm and 1.6mm thick. Length of Bench should not be less than 6 ft (end to end of castiron support). |
| 12 | Pull Chair (Double)- Providing and fixing pull chair in a pair with below specifications:1. Dimensions (LxWxH): 1950 x 700 x 2000 mm 2. Fabricated with main post of NB100mm (G.I.) ‘C’ Class Pipe of approved make.3. Main frame of NB 50mm (G.I.) ‘C’ Class Pipe.4. Handle frame of NB 32mm (G.I.) ‘C’ Class Pipe. (‘NB’ stands for Nominal Bore i.e., Internal Diameter of pipe in millimeters)5. All Pipes are powder coated with 80- 120 micron thick Akzo Nobel or equivalent Paints. 6. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs.7. Zinc primer paint is applied at all the welding points prior to finishing.8. Handle bars are provided with high end quality rubber grips.9. Base plate cover made of virgin LLDPE plastic by rotational molding with 4.00mm thickness, UV resistant and colored.10. Seat to be made up from virgin LLDPE manufactured by rotational molding with 4.00 mm thickness, colored, UV resistant and environmental friendly. 11. Maintenance free bearings of SKF or equivalent make duly oil sealed and self lubricated are used in the equipment manufactured.12. The equipment are fitted with inbuilt limiters to prevent unwanted movements.13. The equipment is fixed on ground with cement concreteand J shaped welded bolts of 18mm thickness. 14. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. |
| 13 | Chest Press (Double) - Providing and fixing chest press in a pair with below specifications: 1. Dimensions (LxWxH): 1800 x 700 x 2000 mm2. Fabricated with main post of NB 100mm (G.I.) ‘C’ Class Pipe of approved make.3. Main frame of NB 50mm (G.I.) ‘C’ Class Pipe. 4. Handle frame of NB 32mm (G.I.) ‘C’ Class Pipe. (‘NB’ stands for Nominal Bore Size i.e., Internal Diameter of pipe in millimeters).5. All Pipes are powder coated with 80-120 micron thick AkzoNobel or equivalent Paints. 6. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. 7. Zinc primer paint is applied at all the welding points prior to finishing.8. Handle bars are provided with high end quality rubber grips. 9. Base plate cover made of virgin LLDPE plastic by rotational molding with 4.00mm thickness, UV resistant and colored. 10. Seat to be made up from virgin LLDPE manufactured by rotational molding with 4.00 mm thickness, colored, UV resistant and environmental friendly. 11. Maintenance free bearings of SKF or equivalent make duly oil sealed and self lubricated are used in the equipment manufactured.12. The equipment are fitted with inbuilt limiters to prevent unwanted movements. 13. The equipment is fixed on ground with concrete and J shaped welded bolts of 18mm thickness. 14. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover.15. High tensile steel with galvanized nut bolts are used for assembly. 16. Equipment must comply to EN16630 / DIN79000 International standard for outdoor fitness equipment. 17. Self-Explanatory stainless steel label fixed on equipment for ease of use. |
| 14 | Standing Waist Trainer- Providing and fixing Standing Waist Trainer with below dimensions:1. Dimensions (LxWxH): 2000 x 700 x 1700 mm2. Fabricated with main post of NB 100mm (G.I.) ‘C’ Class Pipe of approved make.3. Main frame of NB 65 mm (G.I.) ‘C’ Class Pipe4. Handle frame support of NB 32mm (G.I.) ‘C’ Class Pipe. (‘NB’ stands for Nominal Bore Size i.e., Internal Diameter of pipe in millimeters). 5. Foothold plate of made of cast iron of 12mm thickness.6. All Pipes are powder coated with 80-120 micron thick AkzoNobel or equivalent Paints.7. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. 8. Zinc primer paint is applied at all the welding points prior to finishing. 9. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured.10. The equipment is fixed on ground with cement concreteand Expansion Bolts.11. Once the concrete is set, the equipment is fixed on to it. 12. High tensile steel with galvanized nut bolts are used for assembly. 13. Equipment must comply to EN16630 / DIN79000 International standard for outdoor fitness equipment.14. Self-Explanatory stainless steel label fixed on equipment for ease of use |
| 15 | Space walker- Providing and fixing Space walker with below specifications: 1. Dimensions (LxWxH): 1100 x 550 x 1480mm 2. Fabricated with main post of NB 100mm (G.I.) ‘C’ Class Pipe of approved make. 3. ‘U’ shaped main frame of NB 65mm (G.I.) ‘C’ Class Pipe. 4. All other pipes of NB 32mm (G.I.) ‘C’ Class (‘NB’ stands for Nominal Bore i.e., Internal Diameter of pipe in millimeters) 5. All Pipes are powder coated with 80-120 micron thick AkzoNobel or equivalent Paints. 6. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs.7. Zinc primer paint is applied at all the welding points prior to finishing.8. Base plate cover made of virgin LLDPE plastic by rotational molding with minimum 4.00mm thickness, UV resistant and colored.9. Foothold made of nylon alloy with rounded edges to prevent impact and injury. 10. Maintenance free bearings of SKF or equivalent make duly oil sealed and self lubricated are used in the equipment manufactured. 11. The equipment are fitted with inbuilt limiters to prevent unwanted movements. 12. The equipment is fixed on ground with cement concrete and J shaped welded bolts of 18mm thickness.13. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover.14. High tensile steel with galvanized nut bolts are used for assembly.15. Equipment must comply to EN16630 / DIN79000 International standard for outdoor fitness equipment.16. Self-Explanatory stainless steel label fixed on equipment for ease of use. |
| 16 | Bicycle-Providing and fixing Bicycle with below specifications: 1. Dimensions (LxWxH): 1000 x 600 x 1100 mm2. Fabricated with main post of NB 100mm (G.I.) ‘C’ Class Pipe of approved make. 3. Main frame of NB 65mm (G.I.) ‘C’ Class Pipe.4. Handle support frame of NB 50mm (G.I.) ‘C’ Class Pipe.(‘NB’ stands for Nominal Bore i.e Internal Diameter of pipe in millimeters)5. All Pipes are powder coated with 80-120 micron thick AkzoNobel or equivalent Paints.6. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs.7.Zinc primer paint is applied at all the welding points prior to finishing.8. Base plate cover made of virgin LLDPE plastic by rotational molding with 4.00mm thickness, UV resistant and colored.9. Foothold made of NB 25mm (G.I.) ‘C’ Class Pipe.10. Seat to be made up from virgin LLDPE manufactured by rotational molding with 4.00 mm thickness, colored, UV resistant and environmental friendly.11. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured.12. The equipment are fitted with inbuilt limiters to prevent unwanted movements.13. The equipment is fixed on ground with cement concreteand J shaped welded bolts of 18mm thickness. 14. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover.15. High tensile steel with galvanized nut bolts are used for assembly.16. Equipment must comply to EN16630 / DIN79000 International standard for outdoor fitness equipment.17. Self-Explanatory stainless steel label fixed on equipment for ease of use. |
