|
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing). |
| 2 | M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors including 15 mm thick screed bed in CM 1:6 for laying floor tilesetcset and jointed in neat cement slurry and pointed in white/coloured cement to match the shade. Note :- Colour and pattern will be decided by GE/Engr-in-charge. Contractor will bought the tiles only after approval ofcolour and pattern of tile by GE/Engr-in-charge. |
| 3 | M&L non - skid Ceramic tiles 7 to 8 mm thick areaof each tileexceeding 0.18 sqm butnot exceeding 0.38 sqm, in floors including 15 mm thick screed bed in CM 1:6 for laying floor tiles. etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match Note :- Colour and pattern will be decided by GE/Engr-in-charge. Contractor will bought the tiles only after approval ofcolour and pattern of tile by GE/Engr-in-charge. |
| 4 | M & L for 10mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces finished rough to receive tiles . |
| 5 | M & L for 300 x 200 x7 mm thick glazed coloured ceramic tiles on vertical surface including 10mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces finished rough to receive tiles etc. of wall set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade.Note :- Colour and pattern will be decided by GE/Engr-in-charge. Contractor will bought the tiles only after approval ofcolour and pattern of tile by GE/Engr-in-charge. |
| 6 | M & L for 350x250x7 mm/450 x 350 x7 mm thick glazed coloured ceramic tiles on vertical surface of wall including 10mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces finished rough to receive tiles etc.set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade. Note :- Colour and pattern will be decided by GE/Engr-in-charge. Contractor will bought the tiles only after approval ofcolour and pattern of tile by GE/Engr-in-charge. |
| 7 | S & F single lever basin mixer repair Make: Essco, Cat Part No. - APR-101005NB and equlant model in Jaquar/Roca/Kohler. all as specified and directed. |
| 8 | S&F in repair 15 mm bore dia brass3-in-1, CP mixer for mixinghot & cold water screwed down for iron pipe and fixed in repair for bath showers. Make: Essco, Cat Part No. - APR-101273NB and equlant model in Jaquar/Roca/Kohler. all as specified and directed. |
| 9 | S&F in repairPVC Waste pipe 32mm/40mm dia low density polyethylene (LDPE) pipes of pressure rating 6 Kgs/sq.cm complete |
| 10 | S&F health faucet of brass chromium platedwith 1.00 mtr flexible tube and including holder Make: Essco, Cat Part No. - ALE-CHR-585and equlant model in Jaquar/Roca/Kohler.. all as specified and directed. |
| 11 | S & F in repairoverhead showerrose with Rubit cleaning system with shower arm and flange suitable for 15mm bore GI tubingMake: Essco, Cat Part No. - EOS-542A and equlant model in Jaquar/Roca/Kohler.. all as specified and directed. |
| 12 | S & F in repairs chromium plated fancy type 15mm dia bib tap, Make: Essco, Cat Part No. - COS-103037and equlant model in Jaquar/Roca/Kohler all as specified and directed. |
| 13 | S & F chromium plated 15mm dia angular stop cock single way Make: Essco, Cat Part No. -APR-101053 and equlant model in Jaquar/Roca/Kohler. all as specified and directed. |
| 14 | S & F in repvitreous china wash down water closet pan of pedestal pattern, white with \"P\" or \"S\" traps,including connecting to trap seat cover and to flushing pipe Make: Essco, Cat Part No. -ECS-WHT-551PNPP and equlant model in Jaquar/Roca/Kohler.all as specified and directed. |
| 15 | S&F in repair Vitreous China Squatting pan \"Orissa pattern\" white with integral foot rest.Make: Essco, Cat Part No. -ECS-WHT-451 and equlant model in Jaquar/Roca/Kohler.all as specified and directed. |
| 16 | S&Fvitreous china wash hand basin white flat back including cutting for and pinning in end of brackets,.Make: Essco, Cat Part No. -CMS-WHT-103801 and equlant model in Jaquar/Roca/Kohler.all as specified and directed. |
| 17 | S&F brass chromium plated towel ring Make: Essco, Cat Part No. - AEC-1121Nand equlant model in Jaquar/Roca/Kohler. all as specified and directed. |
| 18 | S & F chromium plated soap dishMake: Essco, Cat Part No. -AEC-1131N and equlant model in Jaquar/Roca/Kohler. all as specified and directed. |
| 19 | S & F in repairs PVC seat covers (white) closed pattern with flat bottom and cover and hinging device for EWS. |
| 20 | S&F in repair sheet glass shelf assembly consisting of 5.5mm thick glass shelf 12cm wide with chromium plated bracket guar and railing 60cm long, fixed in repair. |
| 21 | S & F in repairs corner Glass shelf assembly complete all as specified and directed. |
| 22 | S & F in repairs cabinet mirror complete all as specified and directed. |
| 23 | S & F in repairs 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve, float, chain and pull and brackets etc complete. |
| 24 | S&F as in repaire pillar tap cast copper alloy of 15mm size with capstan head chromium plated fancy type screwed down high pressure. |
| 25 | S & F in repair PVC connection 15mm dia 450 mm long with brass check nuts and washers |
| 26 | S&F20 mm dia ball brass valves high presure with polythene Float valve and fly nut complete screwed for iron pipe or brass ferul anf fixed |
| 27 | S&F bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm125gms) |
| 28 | Taking down 15mm boreGI tubingand connections complete all as specified and directed. |
| 29 | Taking down 20mm bore GI tubing and connections complete all as specified and directed. |
| 30 | S&F in repair 15mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches. |
| 31 | S&F in repair 20mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches. |
| 32 | Demolition of precast cement concrete articles and precast concrete block walling built in cement mortar |
| 33 | M&L for PCC 1:3:6 type C2block masonry with solid blocks, exc 10cm in width and setting in cement mortar 1:4 complete |
| 34 | Demoloition of cement concrete of any description and in any situation not otherwise specifically provided for |
| 35 | M&L for 75 mm thick plain cement concrete type C-1, 1:3:6, (40mm graded stone aggregate)as in plinth protection,hardstanding and subbase finishing the top surfaces even and smooth W/O using extra cement. |
| 36 | M&L for Chequered cement concrete tiles 200x200x25mm including 20mm thick screed bed or bedding layer in CM (1:6) for laying floor finishes etc. setand jointed and pointed in neat cement slurry in floor with grey cement and pigment all as directed. |
| 37 | M&L for Plain cement concrete (1:3:6) type C-2, using 40mm graded stone aggregates in surface channel, bed of drains incl form work / moulds complete all as directed. |
| 38 | Taking down cement plaster on brick, concrete stone surfaces etc including raking out joints, hacking for key, scrubbing down with water etc. |
| 39 | M & L 10 mm thick rendering on cement mortar 1:6 on brick or concrete surfaces finished even & smooth without using extra cement in walls |
| 40 | M & L for 15mm thick rendering in cement mortar 1:6 on brick or concrete surfacesfinishing the surfaces even & fair |
| 41 | Preparing newly plastered surfaces of walls and applying three coats of white wash. |
| 42 | Dismentling plain or corrugated steel sheeting of any thickness as in roof and wall covering |
| 43 | S&F pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specifie |
| 44 | Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 45 | Dismantling of wall and ceiling boards of any thickness including cover fillets. |
| 46 | M & L for 6 mm thick ply wood, grade BWR, type BB, fixed with nails to timber frame work on wall surfaces. |
| 47 | M & L for 6 mm thick ply wood, grade BWR, type BB, fixed with nails to timber frame work on ceiling surfaces. |
| 48 | M & L for 12mm thick ply wood, grade BWR, type BB, fixed with nails to timber frame work on ceiling surfaces. |
| 49 | Disantiling timber scantlings 40 sq.cm and over in section, in any position |
| 50 | Disantiling timber scantlings n.exc 40 sq.cmin section, in any position |
| 51 | M & L for second class hard wood in scantling cleane sawn in |
| 52 | M & L for 2 nd class Hard wood plain fillets, square, rectangularor triangular in section,wrought, secured with nails or brads, sectional area exc 6 but n.exc 13 sq.cm. |
| 53 | Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frames) |
| 54 | Taking down Chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frame) |
| 55 | M&L2nd class hard wood plain solid straight chowkats and frame wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 56 | Supply and fix 30mm thick 2nd class hardwood plain framed paneled shutters (any numbers of panels) with panel of timber flat on both sides (feather edged) complete including fitted to chowkats |
| 57 | M&L for Glazed and skeletion shutters 30mm thick2nd class H/W open rebated and prepared to receive glass, gauze tec (without sash bars)edges of framing plainchaqmfered or rounded fitted with cut andmitred beads for securing glass tec sizes of members of shutters as specified in SSR Part I Section 8 clause 8.20 (a) supplied and fitted to chowkats. |
| 58 | Supply and fix 100mm long MS butt hinge medium weight cold rolled. |
| 59 | Supply and fix 75mm long MS butt hinge medium weight cold rolled. |
| 60 | Supply and fix aluminium anodized barrel tower bolt 150mm long extruded section. |
| 61 | Supply and fix aluminium anodized barrel tower bolt100mm long extruded section. |
| 62 | Supply and fix 75mm size aluminium anodized handle fabricated type |
| 63 | Supply and fix 150mm size aluminium anodized handle fabricated type |
| 64 | Supply and fix300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy. |
| 65 | Hacking out old broken glass (any thickness, size quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones. |
| 66 | S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beading in squares not exceeding 0.5 Sq. M in each pane. |
| 67 | S&F MS window guard bars, window frames,Lor T section supports for shelves etc and similar articles confirming to Fe 290-0 or E-165. |
| 68 | S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples |
| 69 | S&F in rep PVC (SWR) floor trap, 75mm dia outlet, plain with grating incl jointing with solvent cement. |
| 70 | M&L CP brass Tubular towel rail, 20mm dia, D type, 60cm long between flanges |
| 71 | Material and labour for preparation of old treatment on external surfaces of walls and washing down with water to receive the surface and applying one coat of cement base paint (colour and tint as approved) on walls etc complete all as specified and directed. |
| 72 | Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed. |
| 73 | Material and labour for preparation of old distempered surface of walls and applying one coat ofoil bound distemper all as specified and directed. |
| 74 | S&F in 600mm x450mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board fixed to wooden plugs with chromium plated brass screws and cup washers all as specified and directed |
| 75 | Fixing and repair vitreous china urinals, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) |
| 76 | M&L 500 Ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed. |
| 77 | M&L1000 Ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed. |
| 78 | Providing cement concrete, type C-2 , 1:3:6 using 40mm size aggregate in foundations,filling and mass concrete . |
| 79 | Demolition of RR masonary built in cement mortar |
| 80 | M & L for walling of RR masonry work un-coursed well bonded, bedded and solidly hearted built in cm (1:6) including forming weep holes |
| 81 | Extra over stone walling for hammer dressing to face stones and dressing of face beds joints with max depression from straight edge n. exc 40mm (Lime and Sand stone) |
| 82 | M & L for PCC pre cast PCC bond stone (for stone walling )type B1 1:2:4 (20mm graded aggregatte) set in cement mortar 1:6. |
| 83 | M & L for flush pointing to R.R masonary wall in cm (1:4) . |
| 84 | M & L for hand packing with broken boulder/ shingle at back of wall |
| 85 | M&L for 15mm thick plaster in CM 1:6 on stone masonary surface or surface other tan fair faces of brick work. |
| 86 | Supply and fix 75mm diaPVC(SWR) pipes of any length. |
| 87 | M&L for PCCType C1 1:2:4 (20 mm graded stone agg) in coping complete all as specified and directed. |
| 88 | Cleaning of septic tank chamber, manhole etc by removing effluent water and sludge dewatering of soak well or sewage pit of any size and depth upto 3.5m and manholes manually or by using pump and buried the same in excavated pits, by digging pits in hard/dense soil including removing surplus earth to a distance not exceeding 50 mtr from starting point and filling up the top portion of pit by excavated soil and sprinkling bleaching powder @ 0.5 Kg/Sqm on excavated areas including temporary baricades. NOTE :- Qty of Sludge will only be measured after dewatering. |
| 89 | M&L for cleaning of 100/110mm dia SWG/PVC sewage pipe line by roding or by pressure pump completely including connected manhole, any depth and removel of sludge etc to a distance exc 1.5 km n. exc 5 km out of MD land complete all as specified and directed. |
| 90 | M&L for cleaning of 150/160mm dia SWG/PVC sewage pipe line by roding or by pressure pump completely including connected manhole, any depth and removel of sludge etc to a distance exc 1.5 km n. exc 5 km out of MD land complete all as specified and directed. |
| 91 | Demolition and breaking up drain pipes 100mm SWG pipe, set in cement mortar. |
| 92 | S&F PVC (SWR) pipes160 mm bore single socketed, in any length with rubber ring joints, laid in trenches, wall or in floors. |
| 93 | M&L cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) to bed of drain pipes including packing under and haunching against the sides of pipes, after they are laid and tested for 160 mm bore pipe complete all as specified and directed |
| 94 | M&L for 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors |
| 95 | Material and labour for providing PCC (1:3:6) type C-2 as in concrete bed to drain pipes including packing under and haunching against the sides of pipes of bore 110mm on after they are laid and tested. |
| 96 | Excavation in trenchesn.exc 1.5mtr wide and n exc 1.5m deep for foundation and getting out in hard dense soil. |
| 97 | Returning/filling in including spreading, levelling, watering and well remming in layers n.exc 25 cm in hard/dense soil. |
| 98 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point |
| 99 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition). |
| 100 | Material and labour for providing pre-cast RCC (1:2:4) type \"B-1\" as in cover slabs of manholes and similar location (using 20mm graded crushed stone aggregates) including necessary form work and set in cement mortar (1:4). |
| 101 | M&L in mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips |
