Institute Of Medical Sciences-IOMS has published Construction Of Mess Hall With Kitchen Of 50 Capacity For The Newly Constructed Security Barrack No 2, Rims Imphal. . Submission Date for this Tender is 23-09-2022. Building Work Tenders in Imphal West Manipur. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Dismantling wood work wrought framed and fixed in frames, other frames and trusses of span up to 10 m and height between ridge and floor level upto 5 m including stacking the materials within 50m lead. |
2 | Sectional area under 40 sq.cm. |
3 | Dismantling sheet roofing including ridges, hips, valleys, gutters etc. stacking the serviceable materials and disposal of unserviceable materials within 50 m lead. |
4 | G.I. sheet roofing |
5 | Dismantling doors, windows and clerestory windows ventilators etc.(wood or steel) shutters including choukhats, architraves, holdfasts and other attachment etc. complete and stacking them within 50 m lead. |
6 | Not exceeding 3 sqm in area. |
7 | Dismantling wooden boardings in lining of walls and partitions including frame work and stacking the serviceable materials within 50 m leads. |
8 | Upto 10 mm thickness. |
9 | Demolition of wooden floors upto floor two level including stacking of serviceable materials and disposal of unserviceable materials within 50 m lead (joists to be measured and paid for separately.) |
10 | old building floors |
11 | Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms lift upto 1.5 metres including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metres |
12 | Hard/Dense Soil. |
13 | Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering lead upto 50 metres lift upto 1.5 metre |
14 | Dry boulder pitching in floor |
15 | Providing and laying cement concrete in foundation and plinth excluding the cost of centering and shuttering in |
16 | 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
17 | 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) |
18 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete |
19 | Thermo-Mechanically Treated bars |
20 | Providing form works i/c centering and shuttering so as to give a rough finish, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 m and removal of the same for in-situ reinforced concrete and plain concrete work in : [Using 12 mm shuttering ply] |
21 | a) Foundation, footings, bases of columns etc. and mass concrete. |
22 | b) Columns, pillars, posts and struts (square, rectangular or polygon in plan). |
23 | c) Sides or soffits of beams, beam haunchings, cantilevers, girders, bressumers and lintels not exceeding 1m in depth. |
24 | Flat surface such as suspended floor, roofs landings and the like floors etc. upto 200 mm in thickness |
25 | Providing and laying in position specified grade of reinforced cement concrete,excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : |
26 | 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size). |
27 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases up to floor five level excluding the cost of centering,shuttering, finishing and reinforcement, with |
28 | 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size). |
29 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. up to floor five level excluding cost of centering,shuttering, finishing and reinforcement : |
30 | 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size). |
31 | 2nd class (local first class) brick work in foundation and plinth in c. m. 1 : 3 (1 cem : 3 fine sand). |
32 | Filling in plinth with sandy soil under floors including watering, ramming, consolidation and dressing complete. |
33 | Half brick masonry 2nd class (local 1st class) in cement mortar 1:3 (1 cement : 3 coarse sand) in superstructure. |
34 | 12 mm cement plaster 1:3 (1 cement: 3 fine sand) |
35 | 15 mm cement plaster 1:3 (1 cement: 3 coarse sand). |
36 | 15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. |
37 | Providing plinth protection 50 mm thick in cement concrete 1:3:6 (1 cement:3 coarse sand:6 graded stone aggrt. of 20 mm nominal size) i/c finishing the top surface of concrete smooth. |
38 | Providing under layer for plinth protection of 75 mm thick rammed & consolidated & grouted with fine sand including preparation of ground. |
39 | Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a coat of approved steel primer red oxide zinc chrome primer conforming to IS:2074-1979) welded and bolted including special shape washer etc. complete. |
40 | Electric resistant welded tube (Conforming to IS:1611-1979) |
41 | Steel work welded in built up sections, framed work in cutting, hoisting, fitting in position & priming coat of red lead paint |
42 | In gratings, framed guard bars, ladders, railings, brackets and similar works. |
43 | Trapzoidal Pre-painted Profile Sheet roofing of approved brand DYNA Roof or equivalent with selt drilling screws of 68 mm long Xylon coated screws with PVC washer & caps complete, exclding the coat of purlins & trusses. |
44 | Pre painted Galvalume Sheet (PPGL) |
45 | i) Profile sheet 0.50 mm/4.2 kgs/sqm |
46 | Trapzoidal Pre-painted Profile Sheet for RidgesGutter or Valley 610 mm wide of approved brand DYNA Roof or equivalent fixed with selt drilling screws of 68 mm long Xylon coated screws with PVC washer & caps completed, exclding the coat of purlins rafter & trusses. |
47 | Pre painted Galvalume Sheet (PPGL) |
48 | i) Profile sheet 0.50 mm/4.2 kgs/sqm |
49 | Providing and fixing aluminium works for doors windows, Ventilators and partions woth extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fiixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up gaps at junctions, at top, bottom and side with required EPDM rubber/Neoprene gasket etc. Aluminium snap beading for glazing /panelling, C.P. brass/ Stainless steel screws, all complete as per architectural drawing and the directions of Engineer-in-charge.(Glazing and panelling to be paid for separately): |
50 | For shutters of doors, windows & ventilators including, providing and fixing hinges/ pivots and making provision for fixing of fitting wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately). |
51 | Anodised aluminium (anodised transparent or dyed to required shade according to IS:1868, Minimum anodic coating of grade AC 15) |
52 | Poviding and fixing glazing in aluminium door, windows, ventilator shutters and partitions etc. with EPDM rudder/neoprene gasket etc. complete as per the architectural drawing and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basic item): |
53 | With float glass panes of 4 mm thickness |
54 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having |
55 | flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : |
56 | 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I |
57 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
58 | Painting on wall with (two coats) of Dulux Acrylic emulsion (Supreme 3 in 1) paint or equivalent of approved quality in all shades on new works to give an even shade. |
59 | Applying one coat of cement primer of approved quality on wall surface. |
60 | Finishing walls weather shield paint of approved quality on new work(three or more coats) to give even shade. |
61 | Providing wood works in frames of doors, windows, clerestory windows & other frames, wrought framed & fixed in position |
62 | P/F 40 mm. thick panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows i/c bright finished brass hinges (with Ordinary type) with necessary screws. |
63 | First class Uningthou wood |
64 | Providing 40 x 3 mm flat iron hold fast 40 cm long i/c fixing to frames with 10 mm dia bolts nuts & wooden plugs & embedding to cement concrete block 30 x 10 x 15 cm 1:3:6 (1 cement:3 coarse sand:6 stone aggregate 20 mm nominal gauge). |
65 | Providing & fixing Aluminium handles with necessary screws etc. complete. |
66 | 125 mm |
67 | Providing & fixing Aluminium Tower bolts (barrel type) with screws etc. complete. |
68 | 250 x 10 mm |
69 | Providing and fixing Aluminium sliding bolts bright finished or black enamelled with nuts & screws etc. complete. |
70 | 300 x 16 mm |
71 | Providing & fixing M.S. single acting spring hinges bright finished with necessary screws. |
72 | 150 mm. |
73 | Granite stone slab flooring over 20 mm ( average) thick base of cement mortar 1 : 6 ( 1 cement: 6 coarse sand ) laid and jointed with grey cement slurry including rubbing and polishing complete with |
74 | Jade Black(60 x 120 cm ) |
75 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. |
76 | Size of Tile 600x600 mm ( Double charged) |
77 | Branded |
78 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets, 15 mm CP brass pillar taps and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : |
79 | Kitchen sink without drain board |
80 | 470x420 mm bowl depth 178 mm |
81 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
82 | 40 mm dia |
83 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. |
84 | Internal work - Exposed on wall |
85 | 25 mm nominal outer dia Pipes |
86 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. |
87 | External work |
88 | 40 mm nominal outer dia Pipes |
89 | Providing and fixing brass bib cock of approved quality. |
90 | 25 mm diameter (Swan neck left/right HN Delux) |
91 | Providing and fixing brass stop cock of approved quality. |
92 | 25 mm diameter |
93 | 40 mm diameter |
94 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- |
95 | White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
96 | Providing and fixing 610 x 20 mm Diplomat brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C.P.brass screws |
97 | Providing and fixing liquid soap container of glass with C.P. lid and brackets fixed to wooden cleats with C.P. brass screws. |
98 | Providing and fixing UPVC soil, waste, rain water and vent pipes including all requisite fittings, jointing of pipes & fittings with solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in charge |
99 | 110mm dia |
100 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4(1 cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. |
101 | Size of Tile 600x600 mm ( Double charged) |
102 | Branded |
103 | Providing and fixing Water Storage Tanks with 400 mm diameter nominal base G.I. overflow tube 25 mm nominal G.I. inlet and 15 mm nominal G.I. outlet tube i/c hoisting a height of 10 m above ground level. |
104 | 1000 litres net capacity storage tanks |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail