|
| 1 | Roughening the surfaces of old concrete roof surfaces by picking , sweeping clean and washing down with water to remove dust etc including removal of old treatement of any description and removing the debris to a distance of exc 50 m away from Plinth protection of the building all as specified and as directed. |
| 2 | M& L 10mm thick rendering in CM 1:4 using water proofing compund at the rate of 3% weight of cement over concrete surfaces. NOTE ; WPC will be measured and paid separately. |
| 3 | M&L priming the plastered roof surfaces with bitumenous primer @ 0.4 Ltr per sqm and applying APP based polymeric membrane minimum weighing 3 Kg per Sqm and minimum 3mm thick reinforced with polyster non wove fabric (Wt not less than 150 gms/per Sqm)by forced applicationandapply bitumen base aluminium paint@ 0.1Ltr /Sqm on laid APP membrane complete all as specified. |
| 4 | Supply only water proofing compund ISI mark as approved by GE. |
| 5 | M&L 40mm Thick PCC (1:2:4) TYPE B1 by using 20mm graded stone aggregate as in roof , where required ober slabs inclufing necessary form work and finishing the exposed surfaces fair even without using extra cement all as specified and as directed. |
| 6 | M&L cutting grooves in brick wall of size 75mm wide 65mm deep and shapping to horizontal face of the groove with cement mortar 1:3 all as specified and as directed. |
| 7 | Disconnecting existing tanks setting aside ( or laying if required) for carry out the roof repair cleaning and removing all scale & dirts etc from tanks & hoisting reconnecting & refixing with all new GI fittings in old or new position of the tank capaacity exc 250 Ltrs & n.exc 500 ltrs all as specified and as directed, |
| 8 | Disconnecting existinng tanks setting aside ( or laying if required) for carry out the roof repair cleaning and removing all scale & dirts etc from tanks & hoisting reconnecting & refixing with all new GI fittings in old or new position of the tank capacity exc 500 Ltrs & n.exc1000 ltrs all as specified and as directed. |
| 9 | S& F Rotational moulded PVC water storage tank hoisted and fixed in positon of 500 ltrs capacity incl dismantling existing water tanks all as specified and as directed. |
| 10 | S& F Rotation moulded PVC water storage tank hoisted and fixed in position 1000 ltrs capacity incl dismantling existing water tanks all as specified and as directed. |
| 11 | S&F in repairs 20mm float valves high pressure of PTMT with epoxy coated aluminium rod and high dessity plastic ball screwed for iron pipe and fixed ( minimum weight 455 gms) all as specified and as directed. |
| 12 | S&F 20mm Ball valves high pressure of PTMT with epoxy coated aluminium rod and high dessity plastic ball screwed for iron pipe and fixed ( minimum weight 455 gms) all as specified and as directed. |
| 13 | Taking up or down steel tubing and connections of 15mm dia complete all as aspecified. |
| 14 | All as per item No 13 here-in-befor but of 20mm dia all as specified and as directed. |
| 15 | S&F 15MM dia steel water tubing medium grade galvanised with all fittings & fixing complete to walls & ceilings or laid in floors all as specified and as directed. |
| 16 | S&F 20MMsteel water tubing medium grade galvanised with all fittings & fixing complete to walls & ceilings or laid in floorsall as specified and as directed. |
| 17 | Refixing of 15mm old steel tubing with new connections in new or old position (Walls, ceiling, floors, etc.) with all new GI fittings all as specified and as directed. |
| 18 | Refixing of 20mm old steel tubing with new connections in new or old position (Walls, ceiling, floors, etc.) with all new GI fittings all as specified and as directed. |
| 19 | S&F in repairs 20mm dia bore Gun metal gate valve with iron wheel head screwed both ends for iron pipe 20mm bore |
| 20 | Taking down plastering on brick/ Stone walls etc including racking out joints, hacking for key, scrabing down with water etc upto a height of 8Mtrs including necessary scaffolding all as specified and as directed. |
| 21 | M & L 15mm thick rendering with as in CM 1:4 and finishing even and smooth without using extra cementforareas complete all as specified and as directed by Engineer-in-Charge Note: Patchwork upto a height of 8Mtrs including necessary scaffolding. |
| 22 | M & L for 15 mm thick rendering in Cement Mortar 1:6 on fair faces of Brick works or Concrete surfaces and finishing even and smooth without using extra cementNote: Patchwork upto a height of 8Mtrs including necessary scaffolding. |
| 23 | M & L rendering 10mm thick cement mortar plaster in CM 1:3 on concrete surfaces on ceiling including finishing even and smooth w/o using extra cement Note: Patchwork upto a height of 8Mtrs including necessary scaffolding. |
| 24 | M & L Preparation of newly plastered surfaces of walls and applying two coats ofcement base paint over a coat of Primer. |
| 25 | M & L for preparing new plastered surfaces of walls and applying 2 coats of OBD on new surface of walls over a coat of Primer complete all as specified and directed. |
| 26 | M & L for applying three coats of white wash on ceiling including preparation of new plastered surfaces complete all as specified and as directed. |
| 27 | Dismantling Single layer Mangalore pattern or similar tiles in roofing as directed by Engr-in-Chargre. |
| 28 | S & F of roof tiles Mangalore pattern, interlocking at side as directed by Engr-in-Chargre. |
| 29 | M & L Ridge or hip tiles to suit Mangalore pattern or roofing tiles, bedded and jointed in lime mortar 1:3 or cement mortar 1:6 |
| 30 | Refixing of mangalore tilee as directed by Engr-in-Chargre. |
| 31 | Dismanting asbests cement ( corrugated, semi-currugated etc.) sheets in roof covering upto a height of 8Mtrs including necessary scaffolding all as specified and directed |
| 32 | S & F, 6mm thick, asbestos cement, corrugated or semi-corrugated sheets in roofs, etc. fixed with L Hook or cranked bolts. upto a height of 8Mtrs including necessary scaffolding all as specified and directed |
| 33 | all as per item No. 32 her-in-before but except sheeting upto a height of 8Mtrs including necessary scaffolding.. |
| 34 | M & L Asbestos cement two piece adjustable plain wing ridge 6mm thick fixed with L hooks upto a height of 8Mtrs including necessary scaffolding and working platform all as specified and directed. |
| 35 | S & F prepainted galvalume aluminium zink coating GI based corrugated steel sheeting 0.5mm thick of any colour having tensile stength of 550 MPAasin roof covering/cladding to wall fixed with self tapping screws as specified upto a height of 8Mtrs including necessary scaffolding all as specified and directed |
| 36 | Dismantling wrought iron or mild steel work of any description not other wise provided for. |
| 37 | S & F roof trusses (framed) trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat section) including distance pieces cleats etc confirming to grade Fe-410 W E250 quality A upto a height of 8Mtrs including necessary scaffolding all as specified and directed. |
| 38 | Demolition wall and ceiling boards ( fiber pulp insullation etc ) or insullation boards / slabs, blankets any thickness including cover fillets upto a height of 8Mtrs including necessary scaffolding. |
| 39 | S & F Anodised aluminium snap gridframe work for false ceiling all as specified of grid size 605 X 605mm upto a height of 6Mtrs including M & L Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified upto a height of 8Mtrsincluding necessary scaffolding including all as specified and directed. |
| 40 | S & F 4mmthick non asbestos fibre cement buildings \"E\" boards fixed or laid/inserted to timber/GI/aluminium frame work in ceiling complete all as specified and directed upto a height of 8Mtrs including necessary scafholding and formwork. |
| 41 | S & Fin repairs 12mm thick perforated particle board/tiles for insulation and accaustic purposes, 60 x 60cm fixed with staples on snap grid with two coats of OBD over a coat of primer all as specified and directed. |
| 42 | Demolition of un reinforced cement concrete in ground floors and paving n.exc 15 cm thickness (below & above ground level) complete all as specified and as directed. |
| 43 | M & Lproviding cement concrete type B-1 1:2:4 (20mm graded stone aggregate) as in roof curves or muds, stops, rounded or chamfered on edges complete all as specified and as directed. |
| 44 | Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified and directed. |
| 45 | M & L for glazed ceramic tiles, coloured, of size 300x 200x 6 to 7mm, as in vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering layer in cement mortar 1:4 complete all as specified and directed. |
| 46 | M&L Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering layer in cement mortar 1:4 complete all as specified and directed. |
| 47 | M & L Non skid ceramic tiles 7 to 8mm thick (square/rectangluar) area of each tile exc 0.06 Sqm but n.exc 0.11 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6. complete all as specified and directed. |
| 48 | All as per item No. 47 here-in-before but each tile exc 0.11 Sqm but n.exc 0.18 Sqm. |
| 49 | M&L for Vitrified ceramic tiles 10mm thick(square/rectangular) dark shade/Double charged/ultra charged area of each tile not exceeding 0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 50 | M&L for Vitrified ceramic tiles 10mm thick(square/rectangular) dark shade/Double charged/ultra charged area of each tile not exceeding 0.36 sqm as in skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering backing coat in CM 1:4 complete all as specified and directed. |
| 51 | M&L Granite(of any type) 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platorms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixtureof pigment to match the shade of granite including 15mm thick screed bed and incl its dismantling complete all as specified and as directed. |
| 52 | M & L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) finished fair and even as in sub base flooring complete all as specifiead and as directed. |
| 53 | M & L for chequered cement concrete tiles size 30cmx30cmx20-25mm thick set, jointed and pointed with grey cement and pigment including 15mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 54 | M&L 100mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base of floor all as specified and as directed. |
| 55 | Demolition of brick work or stone/boulders masonry built in Cement Mortar all as specified and directed. |
| 56 | M & L for brick work in CM (1:6) using old size sub class \"B\" bricks straight or curved on plan all as specified and directed. |
| 57 | All as per Item No 52 here-in- before but except bricks all as specified and directed. |
| 58 | M & L for brick work with sub class \"B\" bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 all as specified and directed. |
| 59 | Taking down chowkats with shutter (without taking off shutters from the frame) n.exc 1.5 Sqm each. |
| 60 | All as per item No. 55 here-in-before but area exc 1.5 sqm but n.exc 4sqm each. |
| 61 | Taking down shutters of any description n.exc 1.00 Sqm each all as specified and directed. |
| 62 | All as per item No. 57 here-in-before but exc 1.00 Sqm and n.exc 2.00 Sqm each all as specified and directed. |
| 63 | All as per item No. 57 here-in-before but exc 2.00 Sqm each. |
| 64 | S & F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, S & F in opening as per manufacturers instructions and as directed by Engineer-in-Charge. |
| 65 | Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style)consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame as per manufacturers instructions and as directed by Engineer-in-charge. |
| 66 | S & F pressed steel frames for doors size 105x60 with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete as specified. |
| 67 | S & F pressed steel frames for doors size 125x60 with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete as specified. |
| 68 | S & F 2nd class hardwood plain, solid straight chowkhats and frames, wrought, framedrebated on the solid,rounded or chamfered, puttogether with glue pinned at joints,complete including treating theback of chowkats with coal tar black paint. |
| 69 | S & F 35mm thick plain factory made framed panelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply the size of rail and stile as per IS-1003 (Part-10 kiln seasoned and chemically pressure treated complete all as specified. |
| 70 | S &F2nd class hardwood 35mm thick glazed and skeleton shutters open rebated and prepared to receive glass gauze etc divided into squares, with plain, chamfered or rounded mitred and rebated sash bars any number edges of framing plain, chamfered or rounded, fitted with cut and metered beads for securing glass etc size of members of shutters as specified in SSR Part I Sec 8 clause 8.20 (a) |
| 71 | M & L 35mm thick flush shutters, solid core constructions, with block board core and plywood face panels, commercial tyep on both sides all as specified and directed. |
| 72 | S&F steel window with side hung shutters including projection type hinges with steel handle & steel peg stay, complete with glazing bars, dovetailed or welded including taking down the old window all as specified and directed. |
| 73 | All as per item No. 72 here-in-before but without glazed bars. |
| 74 | S & F steel window or ventilator fixed type glazed bar all as specified and directed. |
| 75 | S & F 2nd class hard wood in fillets, square, rectangular in section wrought, secured with nails sectional area exc 13 Sq cm and n.exc 25 Sqcm fixed in repairs all as specified and directed. |
| 76 | S&F 19mm thick prelaminated particle board solid core construction with block board core and plywood face panels commericials type on both sides. |
| 77 | S & F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixingclips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified and as directed. |
| 78 | S & F in repairs 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified and as directed. |
| 79 | S & F 200mm long Aluminium anodised, barrel tower bolts of extruded section and fixed all as specified and as directed. |
| 80 | S&F MS butt hinge 100mm long medium weight, mild cold rolled mild steel, and fixed complete all as specified and as directed |
| 81 | S & F stainless steel butt hinges 100mm long with stainless steel hing pin. |
| 82 | S & F 300mm long MS ordinary rat tail rod pattern springs including roller & roller plate complete all as specified and as directed. |
| 83 | S & F in repairs 300mm long MS ordinary rat tail rod pattern springs including roller & roller plate complete. |
| 84 | M & L for preparation of new woodensurfaces of any description ,not other wise described over 10 cm width or girthapplying 2 coats of synthetic enamel paint over a coat of pink primer all as specified and directed. |
| 85 | M & L for preparation of new steelsurfaces and applying 2 coats of synthetic enamel paint over a coat of red oxide zink chrome primer complete all as specified and directed. |
| 86 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stones, concrete or brick surrounds, glazed with putty or fixed with beads complete all as directed. |
| 87 | All as per item No. 84 above but from metal frames including punching or drilling out old glazing pins/spring clips complete all as directed. |
| 88 | S & F 4mm thick sheet glass ordinary quality fixing with putty in square n.exc 0.5 sqm in each pane all as specified and directed. |
| 89 | All as per item No. 88 here-in-before but figured glass, pin head type all as specified and directed. |
| 90 | S & F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with galvanised wire staples all as specified and directed. |
| 91 | S & F fixed in repairs galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with galvanised wire staples all as specified and directed. |
| 92 | S & F MS framed work such as grills or grating etc with ends of bars welded of anysize and any design all as directed of Fe-290 Grade E-165 all as specified and directed. |
| 93 | S & F mild steel flat iron hold fast of any size and similar articles conforming Fe 290 GradeE-165 all as specified and directed. |
| 94 | M& L for PCC (1:3:6) type C0 using 12.5 mm graded stone aggregate as in lintels blocks, copings, etc for filling of back side MS chowkat etc all as specified and directed. |
| 95 | M & L for cutting holes in brick walls built in CM etc, half brick but n.exc one brick and making good dismantled portion in CM (1:3) or cement concrete 1:2;4 type B1 as required all as specified and directed. |
| 96 | S & F 600x450mm bevelled edge mirror of selected quality glass, mounted on AC building board or commercial plywood & fixed to wooden plugs with CP brass screws & cup washers all as specified and directed. |
| 97 | S & F in repairs Aluminium Powder coated 25mm dia with side knob and fixing etc. |
| 98 | S & F in repairs 15mm bore Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm125gms). all as specified and directed. |
| 99 | S&F in repairs 15mm bore Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight15mm-110gms |
| 100 | S & F in repairs 15mm bore bib taps, brass chromium plated, screwed down, screwed for iron pipe or for brass ferrule including flench as in repair complete all as specified and directed. |
| 101 | S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm long all as specified and as directed |
| 102 | All as per Item No 101 here-in-before but 600mm long all as specified and directed. |
| 103 | S&F in repairs 32mm dia bore Waste coupling of PTMT for wash hand basin (half or full threaded) (Minimum weight 32mm45gms/40mm-60 gms) all as specified and directed. |
| 104 | S&F in repairs 40mm dia bore Waste coupling of PTMT for Kitchen Sink (half or full threaded) (Minimum weight 32mm45gms/40mm-60 gms) all as specified and directed. |
| 105 | S & F 15mm bore pillar taps brass chromium plated, screwed down, high pressure with or wihtout lettered hot or cold with long screwed shanks and fly nuts, screwed to iron pipe, fixed in repairs complete all as specified and directed. |
| 106 | S & F 15mm bore chromium plated angle cocks/stop valves brass, screwed down high pressure with crutch or butterfly handle, flench screwed both ends for iron or for union in repair complete all as specified and directed. |
| 107 | S & F in repairs vitreous china squatting pan \"Orissa pattern\" size 580 x 440mm white with integral foot rest including replacement of \"P\" or \"S\" trap lime concrete bedding and making good floors complete all as specified and directed. |
| 108 | S&F EWC Pedestal pattern WC ,any colourinclEWC seat Cover,10 ltr capacity PVC ,LLFC,32 mm dia PVC flush pipe including CP Toilet holder etc complete all as specified and directed. |
| 109 | S & F (in repairs) PVC low level flushing cistern 10 litres capacity, syphonic action type, white, as approved including ball valve float valve and handle, flush pipe as in repair complete all as specified and directed. |
| 110 | S & F (in repairs) vitreous china, wash hand basin white size 550 x 400 mmincluding brackets, chromium plated waste coupling & PVC waste pipe of 32mm dia complete all as specified and directed. |
| 111 | S & F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including waste coupling and waste pipe all as specified and directed. |
| 112 | S & F in repairs Plate rack made out of 1mm thick stainless steel of size 75cm X 75cm X 25cm with all internal fittings (as per sample) approvedby Engir-in-Charge. |
| 113 | S & F in repairs chromium plated 125mm shower rose with or without swivel joints any size including fixing to steel pipe or union all as specified and directed. |
| 114 | S & F in repairs 15mm bore concealed stop cock, chromium plated, cast copper alloy, screwed down with crutch or butterfly handle screwed both ends, as in repair including flench complete all as specified and directed. |
| 115 | S & F in repairs chromium plated towel rail 600mm long, 20mm dia of a approved quality, complete all as specified and directed. |
| 116 | Taking down PVC pipe any dia/type and setting aside for repair |
| 117 | S&F P V C (SWR) pipes of 110 mm bore single socketed in any length fixed to wall all as specified and directed. |
| 118 | S&F P V C (SWR) pipes of 75 mm bore single socketed in any length fixed to wall all as specified and directed. |
| 119 | Taking down PVC (SWR) fittings any type/dia viz bends, tee, branch piece etc |
| 120 | S&F 75mm PVC (SWR) floor trap plain with grating incl jointing with solvent cenment all as specified and directed. |
| 121 | S&F 110mm PVC (SWR) WC connector with lip ring |
| 122 | S&F PVC (SWR) bends any radius 75mm bore provided with or without access door all as specified and directed. |
| 123 | All as per item no 121 here-in-before but 110MM bore all as specified and directed. |
| 124 | S&F 110mm bore PVC (SWR) vent cowl |
| 125 | S&F PVC (SWR) junction single, (Single T) equal or un equal 110 mm bore of any radius with access door all as specified and directed. |
| 126 | M&L for PCC 1:2:4 type B-1 using 20mm graded aggregate as in cills, coping steps, tank staging, sesmic and other similar courses, lacing courses parapet and railing upto 60cm ht kneeler kerb and alike including weathering, slightly rounded or chemfered angle and throating as directed. |
| 127 | M&L rendering 15mm thick in CM 1:3 on brick work or concrete surfaces, mixed with integral water proofing compound as per manufactures instructions, finished even and smooth without using extra cement.After plastering the sunken surface, sunken portion to be filled with water and tested for 72 hrs (after required peirod of curing) to observe leakage/seepages, leakge/seapage if any shall be arrested by pressure grouting and re-tested till leakages/seapages completely stopped.after ponding test, the surface shall be dried and bottom and sides of the sunken slab shall be treated, priming the plastered surface with bituminous primer conforming to IS-3384 @ 0.3 kg per Sqm and applying a tack coat of industrial butiumen 85/25 @ 1.2 kg per Sqm over which applying using glass fibre base bituminous felt type II and grade 2 (conforming to IS-7193 1994) and applying one coat of hot blown bitumen of grade 85/25 @ 1.2 kg per Sqm including 450mm long 25mm dia medium grade GI pipe shall be provided at the lowest portion Spout pipe should be 200mm from the external face of wall for draining out water in case of leakage.The joints in CI/GI/PVC pipes, nahani traps, WC and P/S trap connection shall be made leak proof.The gap around the pipes in walls/beams shall be properly filled and sealed with water proof joints fillers all as specified and directed by Engineer-in-Charge. |
| 128 | S&F 150mmfloor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor of size 140mm all as specified and as directed. |
| 129 | Welding in repairs exc 2.5cm in length, thickness of metal to be welded exc 9mm but n exc 20mm all as specified and as directed. |
| 130 | Running welding in repairs thickness of metal to be welded exc 9mm but n exc 20mm all as specified and as directed. |
| 131 | M & L for preparing Old plastered surfaces of walls and applying one coats of OBD complete all as specified and directed |
| 132 | S&F anodized powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified & as directed. |
| 133 | S&F anodized powder coated aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodized aluminum snap beading screws etc. complete all as specified & as directed. |
| 134 | Supply and fixing brass mortice lock, vertical type, size 65mm, 4 Levers with escutcheon plates & two keys fixed in aluminium frame complete all as specified. |
| 135 | S&F anodized powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 Nos), suitable handle (1 No.) complete all as specified & as directed. |
| 136 | S & F aluminium daco Grills (DG 104) with F section Channel complete of 4mm thick for windows of aperture 50 mm complete all as spd and directed. |
| 137 | S&F sheet glass 5mm thick selected quality tinted and glazing with beading and rubber gasket exc 0.5 sqm in each pane. |
| 138 | S&FAluminium hydraulic door closer regulated designNo 3 universal type suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and aluminium (extraded section body) |
| 139 | All as per item No 141 here-in- before but in repairs all as specified and as directed. |
| 140 | S&F in repairs 15mm bore wall Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed (Make : Hindware Cat no : F280018) |
| 141 | S & F in repairs wash down water closet (pedestal pattern) of size 69 x 36 x 64 cm white Model R10* complete incl all fitting & fixtures complete all as per cat No Cat no : 92520 S-30 specified(Make : Hindware ) |
| 142 | S & F in repairs Health faucet cromium plated incl all fitting & fixtures complete all as specified(Make : Hindware Cat no : F160001) |
| 143 | S & F Paper Holder with cover cromium plated incl all fitting & fixturescomplete all as specified(Make : HindwareCat no : F840009) |
| 144 | S&F in repairs 15mm bore two way brass chromium plated Bib Cock, screwed for iron pipe of for brass ferrule including flench as in repairs complete all as specified and as directed. |
| 145 | S&F in repairs 15mm bore two way brass chromium plated Angle Cock, screwed for iron pipe of for brass ferrule including flench as in repairs complete all as specified and as directed. |
