}

Supply, Installation, Testing And Commissioning Of Electro-Mechanical Equipments At Water Supply Scheme Tahab Old - Supply, Installation, Commissioning And Creation Of Pole Mounted, Outdoor Type 63 Kva Electric Sub Station As Per The Technical Spec, Pulwama-Jammu And Kashmir

Public Health Engineering Department has published Supply, Installation, Testing And Commissioning Of Electro-Mechanical Equipments At Water Supply Scheme Tahab Old - Supply, Installation, Commissioning And Creation Of Pole Mounted, Outdoor Type 63 Kva Electric Sub Station As Per The Technical Spec. Submission Date for this Tender is 24-10-2022. Nuts Supply Tenders in Pulwama Jammu And Kashmir. Bidders can get complete Tender details and download the document.




Tender Notice

33881534
Corrigendum : Supply, Installation, Testing And Commissioning Of Electro-Mechanical Equipments At Water Supply Scheme Tahab Old - Supply, Installation, Commissioning And Creation Of Pole Mounted, Outdoor Type 63 Kva Electric Sub Station As Per The Technical Spec
Tender
Indian
Jammu And Kashmir
Pulwama
24-10-2022

Tender Details

Supply, Installation, Testing And Commissioning Of Electro-Mechanical Equipments At Water Supply Scheme Tahab Old - Supply, Installation, Commissioning And Creation Of Pole Mounted, Outdoor Type 63 Kva Electric Sub Station As Per The Technical Specifications Given Here Under -Specifications Conforming To Is : 1180 ( Part 1 ) 2014 With Latest Amendments .Type: Ht / Lt Transformertype Of Cooling:Onan.Operating Conditions:Input=11000 Voltsoutput =433 Volts Ac Supply In 3- Phase.Terminals:Input=3 No. Ht Bush Rods With Insulators, Washer, Nuts Etc.Output=4 No. Lt Bush Rods Switch Insulators, Washers, Nuts Etc.Core: The Core Shall Be Of High Permeability To Reduce Core Losses And The Strips Shall Be Of Suitable Size And Gauge. Transformer Coils: Suitable Number Of Ht And Lt Coils In Each Leg Of The Core. The Transformer Coils Shall Be Fabricated Out Of Superior Quality Aluminum Wire / Strips, Properly Wound. The Ht Transformer Is Completely Filled With Suitable Grade Transformer Oil Up To Required Level. The Job Includes Carriage, And All Leads And Lifts Involved.The Ht Transformer Shall Be Of Reputed Make From An Iso Certified Company As Per Relevant Standards And A Test Certificate Shall Be Provided Before Installation. The Transformer Shall Also Be Provided With Breather Fill With Silica Jel Crystals , Conservator With Oil Level Indicator , Explosion Vet And Adequate Radiator Fins / Tubes. The Impedance Of Transformer Shall Be As Per Is:1180 ( Part 1 ) 2014 With Latest Amendments.Note: The Scope Of The Work Shall Include Obtaining Of Necessary Inspection / Clearance Certificate From The Concerned Department For All The Required Equipment. The Testing And Commissioning Shall Be Completed Only After Obtaining Above Certificate. 3 Fabrication, Providing And Fitting Ofmodularmotor Control Panel Of Appropriate Size Fabricated Out Of 14 Swg Sheet Having Required Openings / Vents And Protection Class : Ip-55 & Fitted With Accessories As Under:A ) Busbar Chamber: 100 Ampres Copperb ) Main Circuit Breaker ( Incomer Mccb ) : 4 Poleqty:- = 02 Nocurrent Rating = 200 Amp. 50 Kac ) Change Over Switch:Qty. = 01 No.Rating =100 Ampered ) Motor Back-Up Protection Mccb: 3 Poleqnty = 2 No’Scurrent Rating= 125 A, 36 Kae ) Submersible Motor Starter:Fully Automatic Submersible Motor Starters. Rating =30Hp Power Specs =3 ?, 415 + 15% V, 50 + 3 % Hz.Relay Range= 30-50 A.Protection = Under Voltage / Over Voltage Qty = 02 No’Sf ) Auxiliary Mccb For Heating / Lighting:Circuit Breaker = Mccb ( Outgoing ) Qty.= 1 No.Current Rating= 63 Amp.Rest Of The Specicifications Are As Per Clause-43 Oftechnical Annexure Of Sbd 4 Providing And Fitting Of 3-Core Flat 10 Square Mm Submersible Copper Cable Conforming To Is: 694 ( Part 1St ) – 1964 & Is: 694 ( Part 2Nd ) - 1964 For Submersible Pumping Unit And Other Electrical Equipments . The Cable Connections Terminal Shall Be Fitted With Copper Thimbles Of Required Size. : 5 P / I Of Earthing Station For 63 Kva Electric Substation, Lt Panel And Stabilizer Comprising Of Company Fabricated Earthing Electrode As Per Is: 3043. The Job Includes Auguring Of Bore Of Required Dia / Depth For Installation Of Electrode Along With Backfill Compound Mixed With Soil And All Other Items Required Thereof For Achieving The Best Result. The Job Includes Connecting Of Electric Gadgets Through Gi Strip As Per Relevant Standards. Safe Earthing Electrode Size:80 Mm Dia , Length :2000 Mmback Fill Compound :30 Kg

Corrigendum Details

Sr No CorrigendumDate Corrigendum CorrigendumType NewSubmissionDate
1 03-10-2022 Extension Notice Date 12-10-2022
2 13-10-2022 Extension Notice II Date 24-10-2022
3 17-09-2022 Corrigendum for Modification. Technical Bid 01-10-2022
4 28-09-2022 Corrigendum II Technical Bid 01-10-2022

Key Value

Document Fees
INR 500 /-
EMD
INR 8560.0 /-
Tender Value
INR 4.28 Lakhs /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail