Supply, Installation, Testing And Commissioning Of Electro-Mechanical Equipments At Water Supply Scheme Sail Nazbal Under Jjm-2 Supply, Installation, Testing & Commissioning Of Submersible Pumping Unitas Per Is 8034 With Following Specification Are , Pulwama-Jammu And Kashmir

Supply, Installation, Testing And Commissioning Of Electro-Mechanical Equipments At Water Supply Scheme Sail Nazbal Under Jjm-2 Supply, Installation, Testing & Commissioning Of Submersible Pumping Unitas Per Is 8034 With Following Specification Are As Under :Pump : Efficiency = Not Less Than 50% Speed= 2900 Rpmtype Of Pump = Mixed Flow.Type Of Fluid To Be Handled=Clear Watercomplete Specification As Per Clause - 1 Of Sbd.Motor Capacity:30Hp 3 Providing And Fitting Of 3-Core Flatsubmersible Copper Cable Conforming To Is: 694 ( Part 1St ) – 1964 & Is: 694 ( Part 2Nd ) - 1964 For Submersible Pumping Unit And Other Electrical Equipments. The Cable Connections Terminal Shall Be Fitted With Copper Thimbles Of Required Size. Size: 16Sq.Mm 4 Providing, Fitting, Testing And Commissioning Ofvoltage Stabilizeras Per Specifications Below: Type Of Voltage Controller: Manually Operated Copper Wound, 3-Phase, Ac Power Supply Multi Step.Type Of Regulator: Double Plate Type With Electrolytic Copper Contacts.Input Voltage : 250-400 Volts. ( 3 Phase ) Output Voltage : 400 ±10% Volts.Complete Specification As Per Clause - 44 Of Sbd.Rating:50Kva 5 Fabrication Of Gantry Mechanism / Cgi Shed / Angle Iron Sleeping Bedby Way Of Providing Structural Steel In Built Up Sections , Trusses And Framed Work, Including Cutting , Hoisting , Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete Welded 6 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering . All Work Upto Plinth Level With 1: 2 : 4 Mix ( 1 Cement, 2 Coarse Sand, 4 Graded Stone Aggregate 20Mm Nominal Size ) 7 Providing, Installation Andtestingof Manual Type Triple Spur Gearchain Pulley Block Along With Monorail Gearedtravelling Trolleyhaving Following Features. Gears:- The Hoist Shall Have Precision Machine Case Hardened Alloy Steel Gear Mounted On Bearings And Housed In A Dust Proof Gear Box. The Lubrication Of Gears Should Be Of High Viscosity And Temperature For Longer Life Of Gears.Load Chain:-The Load Chain Be Made Of High Tensile Alloy Steel Having Wear Resistance And Greatest Mobility. The Chain Should Be Accurately Collaborated, Tested And Have Adequate In Built Factor Of Safety For Safer Operation.Load Chain Wheel:- The Load Chain Well Should Be Double Ball Bearing Supported Andspecially Designed, Perfectly Machined Wheel Providing Correct Grip Of Load Chaintomakes The Hoist Most Safe And Reliable Against Any Failure. The Main Specifications Of C.P Block Are Given Below : Make = Reputed Makecapacity=3Ton No. Of Load Chain Falls = 2 Or Above Min. Height Of Lift = 6 M 8 Carriage Of Sand, Stone Aggregate By Mechanical Transportincluding Loading, Unloadingand Stacking ( Average Distance-5Km ) 9 Carriage Of Cement / Steel / Cgi Sheet / Gi Pipes Below 100Mm Dia And Other Heavy Materials By Mechanicaltransportincluding Loading, Unloadingand Stacking ( Average Distance -25Km )

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	03-10-2022	Extension Notice	Date	12-10-2022
2	13-10-2022	Extension Notice II	Date	24-10-2022
3	17-09-2022	Corrigendum for Modification	Technical Bid	01-10-2022
4	25-10-2022	Extension Notice III	Date	07-11-2022
5	28-09-2022	Corrigendum II	Technical Bid	01-10-2022

INR 500 /-

INR 10800.0 /-

INR 5.40 Lakhs /-