Public Works Department-PWD has published Construction Of Multipurpose Auditorium / Sports Stadium For Zanskar Sub Division At Padum. . Submission Date for this Tender is 19-09-2022. Auditorium Construction Tenders in zanskar Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 12-Sep-2022 | cancelled Corrigendum | Other | 19-09-2022 |
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic xcavator) over areas (Exceeding 30cm in depth, 1.5mtr inwidth as well as 10sqm on plan) inculding disposal of excavated earth, lead upto 50m and lift upto 1.50m,disposed earth to be levelled and neatly dressed: |
| 2 | Ordinay Rock |
| 3 | All kind of soil |
| 4 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 5 | Supply and laying of stone soling in horizontal with all leads and liftsincludingall carriages complete job: |
| 6 | Providing and laying in position cement concrete of specified grade of 1:4:8 mix excluding cost of centering and shuttering all work upto plinth level i/c all carriages,leads and lifts. Mud mat |
| 7 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 8 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level in 1:1.5:3 mix i/c all carriages, leads and lifts |
| 9 | Reinforcement for RCC work including cutting, bending, placing position compelte i/c all carriages,leads and lifts.Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form work for |
| 11 | Foundations, footings, bases for columns |
| 12 | Columns, piers, abutments, pillars, posts and struts |
| 13 | Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 14 | Suspended floors, roofs, landings, balconies and access platforms. |
| 15 | Coursed masonry with hard stone 1:6:12 in foundation and plinth with bond stone including lead and lift |
| 16 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.50 mm thick with 20mm nominal size stone aggregate. |
| 17 | 12 mm thick plaster, (1:4) mix. |
| 18 | Apllying cement primer on plaster surface |
| 19 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 20 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Complete job. Truss Area |
| 21 | P/F colour coated track deck of 0.50 mmthickness CGI roof sheetsincluding all nuts bolts and fixtures complete job. |
| 22 | Providing ridges or hips of width 60cm overall width plain G. S. sheet fixed with poymer coated J. or L hooks, bolts and nuts 8mm G. I. limpet and bitumen washers complete. 0.80 mm thick with zinc coating not less than 275gm /m2 specifications as per engineer in charge |
| 23 | Providing and fixing HPL Teak finish 8 mm thick, sizes 3660 mm x 1400mm x 8 mm. Rivet less cladding system as/per approval of engineer in chargeup to any height or as per drawing , woodencladdings( Exterior )with required sectionsclamps / strips ,providing base support( CompleteJob as per specifications ) |
| 24 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dash fastener shall be paid for seperately) Kail Wood |
| 25 | Providing and fixing panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for seperately,all complete as per direction of Engineer-in-charge.(second class teak wood35 mm thick shutter) |
| 26 | Providing fixing paneling and glazing in panalled or panalled glazed shutters for door/windows 25mm to 40mm thick of 1st class kail wood. |
| 27 | Providing and fixing factory made uPVC AIS or FENISTA or KOEMMERLING make white/wood Finish colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sashshall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. (Double Glazed Unit or SHGC with <0.25 and >0.35 VLT may be introduced.) |
| 28 | Casement cum fixed panel window having both end single casement panel, middle fixed panels and at top completely fixed ventilator with S.S friction hinges (350 x 19 x 1.9) made of (big series) frame 67 x 60 mm , sash 67 x 80 mm &mullion 67 x 80 mm all having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window above 3.00 sqm upto 5.00 sqm). |
| 29 | Providing and fixing factory made uPVC ofAIS or FENISTA or KOEMMERLING make white/Wood Finish colour fixed glazed windows/ventilators comprising ofuPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable. Variation inprofile dimension in higher side shall be accepted but no extra payment on this account shall be made. (Double Glazed Unit or SHGC with <0.25 and >0.35 VLT may be introduced. |
| 30 | Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.) |
| 31 | Providing and fixing casement handle made of zinc alloyed (white powder coated) for UPVC casement window with necessary screws etc. complete. |
| 32 | Providing and fixing DGU ( with <0.25 SHGC and >0.35 VLT glazing in uPVCwindow, ventilator shutters and partitions etc. with proper sealing as per norms etc. complete as per the architectural drawings and the directions of engineerin- charge. ( Note : DGU with <0.25 SHGC and >0.35 VLT) |
| 33 | TOUGHENED DGU glass panes of 5.0 mm thickness SAINT GOBAIN / ASAHI INDIA GLASS /HNGIL make asapproved by engineer in charge |
| 34 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.)Powder coated aluminum (minimum thickness of powder coated 50 microns). |
| 35 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin- charge. (Cost of aluminum snap beading shall be paid in basic item.) With toughened glass panes of 5.0 mm thickness (weight not less than 13.50 kg / sqm) |
| 36 | Providing and fixing put floor five level precast cement concrete solid block including hoisting and setting in position with cement mortar 1:3 (1 cement :3 coarse sand ) cost of required centringand shuttering and complete 1:3:6 (1 cement :3 coarse sand :6 graded stone aggregate 20mm nominal size) incld. carriage complete job |
| 37 | Providing and fixing of wooden panelling on walls upto height of 1 mtr including frame work, cornice and other items complete job as per specification. |
| 38 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS:277 and consisting of angle cleats of size 25 mm widex1.6mm thick with flanges of 27mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm diax40mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.5mm of required length with nuts & bolts of required size and other end of angle hanger fixed with G.I. channels 45x15x0.9 mm running at the spacing of 1200 centre to centre, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having clips of 10.5 mm at 450mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64mm diaX230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre to centre, with 25mm long drive-all screws @ 230 mm interval ,including fixing of gypsum board/calcium silicate board to ceiling section and perimetre channel with the help of dry wall screws of size 3.5x25mm at 230mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the gypsum board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers’ specification and also including the cost of making openings for light fittings, grills diffusers, cutouts made with frame of perimetre channels suitably fixed all complete as per drawing and specification and direction of the Engineer-in-Charge Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5mm having approx. 15 % perforated area with perforation size and pattern as approved by the Engineer-in- charge and as per manufacturer’s specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60 |
| 39 | Providing and fixing 12 mm thick tongued and grooved pine wood (soft wood) 4.5 inch in width panelling or wall panels and ceiling including all necessary fixtures including cornice with necessary screws. Priming coat on exposed surface etc complete, including wood work in frames |
| 40 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade |
| 41 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut granite lappato finish ofrequired size, approved shade, colour and texture laid over 20 mm thick base cementmortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed withmatching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing toedges to give high gloss finish etc. complete at all levels |
| 42 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08 persant and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. |
| 43 | Providing and fixing thermal insulation of ceiling (under deck insulation) with specified glass wool conforming to IS: 8183, 50mm thick, wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3mm) @ 60cm c/c and wire mesh of 12.5mm x 24g wire for top most ceiling of building. With resin bonded fiber glass wool with density 24 kg/cum |
| 44 | Providing and fixing tiled False Ceiling of perforated metal tiles of size 595x595mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms/sqm both side inclusive ) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200 x 600mm and secondary cross “T” of length 600mm and size 24x25 mm made of 0.30mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.30mm and laying false ceiling tiles of approved texture in the grid including, wherever, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.8 mm spaced at 1200mm center to center along size85x30x0.8 mm spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. (The rate INCLUDES the cost of metal tiles ). |
| 45 | Applying primingcoat with ready mixed ..pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) (Note it should have low or no VOC as per green building guidelines) |
| 46 | Preparing newly primed wooden surface for pauinting by way of filling of putty sand papering rubble complete |
| 47 | Applying priming coat wih ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)it should be low or no VOC as per Green Building guidelines |
| 48 | Kota stone slab 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm ( average) thick cement mortar 1:3 (1 cement:3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing, polishing and curing complete. |
| 49 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 50 | Supplying and fixing of FIBA Approved Pro competition mobile basket ball set with 20 mm acrylic board (KFTBB4 ) New State of the basketball mobile pole set. Complete job |
| 51 | Supplying and fixing Hard Maplewood Flooring of 85mm system with Rubber pads, Pinewood Runners, Maplewood. Finished with multiple line marking for basketball and badminton. Whole System: Rubber Pad= 10mm Pinewood Runner= 50mm Maplewood Planks= 25mm |
| 52 | Supplying and fixing Of ITTF Approved TT table dimension of table must as following: Width: 1.5 m Length: 2.7 m Height: 75 cm. Complete job |
| 53 | Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) . Light shade using white cement, including all leads and lifts |
| 54 | Supplying and fitting of indoor plastic stadium soft tip Up chairs complete job as per the direction of engineer incharge, complete job |
| 55 | Provision for providing and fixing ornamental Shingstak (Ladakhi wood carving over exterior Windows and main entrance door) (Design as per the direction of Engineer-In-charge.) including polishing all complete |
| 56 | Electrification of the whole buiding including loading un loading complete job |
| 57 | Providing and fixing water closet squatting pan (Indian Orissa patern 580x440mm 100mmwith P or S trap 10lit. Low level PVC flushing cistern |
| 58 | Providing and fixing white vitreous Chinawater closet (European type W.C . .pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever)conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever required. pan with lSI marked white solid plastic seat and lid. |
| 59 | P/F low level PVC cistern including loading un loading complete job |
| 60 | Providing and fixing white vitreous China wash Basin with C.I brackets, single hole basin mixer, 32mm CP brass waste of standard pattern , incl. painting of fittings and brackets, cutting and making good the walls where ever required. Wash basin 550x400mm with a pair of a5mm CP brass taps |
| 61 | P/F white vitreous China pedestal for wash basin complete ressed at back for the reception of pipe and fittings |
| 62 | P/F 600x450mm bevelled edge mirror of superior glass of approved quality complete with 6mm thick hard board ground glass to wooden cleats with C.P brass screws and washers complete. |
| 63 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. |
| 64 | Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the |
| 65 | 25mm OD(SDR-7.4) |
| 66 | 32mm OD(SDR-7.4) |
| 67 | External work including trenching, refilling etc. Main supply line. |
| 68 | 40mm OD (SDR-7.4) |
| 69 | a) PPR Union 25mm |
| 70 | b) PPR Union 32mm |
| 71 | c) PPR Union 40mm |
| 72 | d) PPR Holder 25/15mm |
| 73 | e) PPR Reducer 40/32mm |
| 74 | e) PPR Reducer 32/25mm |
| 75 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) |
| 76 | 40 mm nominal bore |
| 77 | Providing and fixing ball valve PPR of approved quality complete |
| 78 | a) 15mm dia |
| 79 | b) 20mm dia |
| 80 | c) 25mm dia |
| 81 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank including loading un loading complete job |
| 82 | Tank(8X1000) |
| 83 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-incharge. |
| 84 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with epoxy coated aluminium rod with L.P/H.P.H.D plastic balls.25mm nominal bore, 152mm long, weighing not less than 440gms. |
| 85 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 |
| 86 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 87 | Constructing Stone masonry chamber for underground C.I. inspection chamber and bend with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23kg and weight of frame 15 kg ) R.C.C. top slab with 1:1 ½ : 3 mix ( 1cement : 1 ½ coarse sand : 3 graded stone aggregate 20 mm nominal size),foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design : 20.24.1 Inside dimensions 455x610 mm and 45 cm deep for single pipe line- |
| 88 | P/F master trap |
| 89 | Geyser"s 35 Litre |
| 90 | Kent water purifier 50 Litre capacity per hour |
| 91 | Water lifting electic motor 2 Hoarse C&G, inl. Shelter, electric supply and board complete |
| 92 | P/F 600x120x5mm glass shelf with edges off. Supported on anodised angle frame with CP brass brackets and guard rail complete fixed with 40mm screws, rawl plugs etc. |
| 93 | P/F toilet paper holder (CP) |
| 94 | P/F soil, waste and vent pipes 1mm thick |
| 95 | a)PVCS&S pipe(150mm dia) |
| 96 | b)PVCS&S pipe(100mm dia) |
| 97 | c)PVC S&S pipe(75mm dia) |
| 98 | d)PVC S&S pipe(50mm dia) |
| 99 | PVCCowell 50mm dia |
| 100 | P/F PVCstay and clamps for PVCpipes |
| 101 | a) 100mm |
| 102 | b) 75mm |
| 103 | P/F bend of required degree with door, inspection rubber washer 3mm thick, bolts and nuts complete PVC S&S pipes |
| 104 | a) 100mm |
| 105 | b) 75mm |
| 106 | P/F plain bends |
| 107 | a) 100mm |
| 108 | b) 75 mm |
| 109 | P/F Tee-junction of required degree with access door, inserted rubber washer 3mm thick, bolts and nuts complete.100x100x100 PVC 1mm |
| 110 | a) 100mm |
| 111 | b) 75mm |
| 112 | P/F PVC Reducer 100-50mm dia |
| 113 | P/F PVC collar 100 & 75mm |
| 114 | Providing and fixing liquid PTMT soap container 109mm wide 125mm high and of approved quality weighing not less than 105 grms |
| 115 | P/F PTMT towel rails with brackets fixed to wooden cleats with CP brass with concealed fittings arrangement of approved quality (600mm long total length 645mm ,`78mm wide and effective hight 88mm weighing not less than 190gms |
| 116 | P/F CP gratting100mm dia |
| 117 | P/F PVC connections 15mm |
| 118 | Supply and fixing of design manafacture and commissioning and 05 years comprehensive waranty and maintenance of 500LPD Solar water heating system (tube collector based) at various site with technical specifications complete job. |
| 119 | Supplying and fitting of 40 W flood light, the luminary should have at least IP65 ingress protection rating |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
