|
| 1 | Schedule \"A\" |
| 2 | Dismantling of plain or corrugated steel or AC sheeting, any gauge, or any thickness as in roof coverings including nainital or similar pattern including Ridges/Valley/Hips/ Eaves board complete all as specified and directed. |
| 3 | Dismantling of timber scantling 40 sq cm and over in section, in any position as in framed work complete all as specified and directed. |
| 4 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed |
| 5 | Demolition of reed, lathing, single or double,including battens and plaster or chicken wire lathing complete all as specified and directed. |
| 6 | Demolition of brick masonary work, built in cement mortar or cement lime mortar including all quions, arches, pillars, etc. but excluding precast concrete articles etc. complete all as specified and directed. |
| 7 | Taking down chowkhats or frames with shutters (without talking off shutters from the freme) area n.exc 1.50 eachand removing from sitecomplete all as specified and directed. |
| 8 | Taking down chowkhats or frames with shutters (without taking off shutters from the frame) area exc 1.50 and n.exc 4 Sqm eachand removing from site complete all as specified and directed. |
| 9 | M&L for PCC 1:4:8 Type D2 using 40mm graded stone aggregatein foundations, filling and mass concretecomplete all as specified and directed. |
| 10 | M&L for fly ash brick work with old size sub class \"B\" bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 11 | M&L fly ash Brick work using modular size bricks, one brick thick honey comb wall built in cement mortar1:4 complete all as specified and directed. |
| 12 | M&L for brick work with old size sub class \"B\" bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed. |
| 13 | M&L for providingRCC (desigm mix) M-25 using 20mmgraded stone aggregateas in Rafts, Footings,Foundation, plinth beams, Braces for columns etc complete all as specified and directed. (Note :- Reinforcements and formwork shall be measured and paid separately) |
| 14 | Form work to sides ofconcrete foundation ,footings, bases ofcolumns, raft and raft beams sides and soffits (if any )of foundation and plinth beams for flat rough finished concrete surface complete all as specified and directed. |
| 15 | M&L for providingRCC (desigm mix) M-25 using 20mm graded stone aggregateas in Beams,Cantilevers,Lintels etc and the like complete all as specified and directed. (Note :- Reinforcements and formwork shall be measured and paid separately) |
| 16 | Use and waste of form work to soffits of floor or roof beam , beam haunching, girders, bressummers, lintels, cantilevers, shelves, for flat rough finished surfaces complete all as specified and directed. |
| 17 | M&L for RCC (design mix) M-25 using 20 mm graded stone aggregate as in chajjas and similar work complete all as specified and directed.Note - Reinforcement and form work shall be measured and paid separately. |
| 18 | Form work to chullah hood, chajjas, troughs and similar items including edges etc for rough finished flat concrete surface complete all as specified and directed. |
| 19 | M&L for Precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:4 complete all as specified and directed. |
| 20 | M&L for TMT bars 10 mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 21 | M&L for TMT bars 6mm to 8mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 22 | M&L for TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders , cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 23 | M & L for rendering 20mm thick on brick wall or concrete surface in cement mortar (1:4) consisting two layers, top layer of 10mm thickmixed with water proofing compound, finished even and smooth without using extra cement complete all as specified and directed. (Note:- Water proofing compound shall be measured and paid saperately.) |
| 24 | Supply only integral water proofing compound conforming to IS: 2645 - 1975 specification complete all as specified and as directed. |
| 25 | M&L rendering 10 mm thick in cm 1:6 on fair faces of brick work or concrete surfaces finishing surfaces even and smooth without using extra cement , complete all as specified and as directed. |
| 26 | M&L formild steel work in tubular trusses and tubular posts including special shaped washer duly welded,complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St 240 with one shop coat of Zinc Chrome primer paint including preparation of surface at contractor workshop before fabrication complete all as specified and as directed. |
| 27 | S&F for Mild steel plates (Plain or chequered) channels,square cut or notched,forming holes with rivetted,bolted or welded attachment conforming to Fe-410-W (Grade E-250) quality A complete all as specified and as directed. |
| 28 | S&F Rolled mild steel in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) of grade Fe 410-W (Gde E-250) quality Acomplete all as specified and directed. |
| 29 | M&L for high tensile 550 MPA yield strengthPre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof coveringThe sheet shall have a hot dip metallic zinc aluminium alloy coating of zinc 43.5%, aluminium (55%)and silicon (1.5%) with total mass coating of 150 gms/sqm on both sides.Covered width will be 1020mm and sheet length as per site requirement.The profile is having return leg for proper side lap.The sheet shall be fixed using self drilling/self capping screws with EDPM seal complete all as specified and directed. |
| 30 | All as per item No- 28 here- in- above but Plain sheetsas in ridges/ hips / valley/Eaves and Eaves board- ditto-- |
| 31 | S&F 4mm thick non-Asbestos fibre cement building board( E-board) false ceiling with board of size 600x600mm with powder coated GI snap grid frame work including cutting holes in brick wall built in cement mortar & making good in cement concrete 1:2:4 type B0 Cement mortar 1:3 complete all as specified and directed including all necessary drilling and necessary arrangement to fix electrical items as under:- (a)27x27x0.55mm thick GI angle powder coated duly plugged @ 600mm centre to centre along perimeter of wall.(b)25x25x0.55mm thick GI tee powder coated as main and cross runners suspended with 1.6mm dia GI wire suspenders(n.exc 1.2mtr length) with adjustable clamps and dash true fastners plugging in RCC slab/A.I Runner of slopped roof placed @ 600mm centre to centre from perimeter of wall. (c)Fixing of 4mm thick non-Asbestos fibre cement building board( E-board) false ceiling with board of size 600x600mm of approved texture and finished complete with two coats of oil based distemper over a coat of alkali resistance primeron ceiling.NOTE: The complete ceiling work shall be done as per manufactures instruction and as directed. |
| 32 | Demolition of cement concrete un reinforced in ground floor and paving n. exc 15cm thick (below or above ground level) complete all as specified and directed. |
| 33 | M&L for sand filling under floor or in foundations including watering and consolidation complete all as specified and directed. |
| 34 | M&L Broken stone or boulders hardcore of gauge exceeding 63 mm but not exceeding 100 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 35 | M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate 100 mm thick as in sub base complete all as specified and directed. |
| 36 | M&L for 40 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in base course complete all as specified and directed. |
| 37 | S&F joint free non skid Ceramic tiles, coloured, superior quality 7 to 8mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 38 | M&Lfor non skid Ceramic tiles, coloured, superior quality 7 to 8mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm on vertical surface such as dado / skirting / risers to steps etc jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including rendering 10 mm thick in cement mortor 1:4 complete all as specified and directed. |
| 39 | M&L for non skid ceramic coloured tiles of design as approved by GE 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed or bedding layer in CM 1:6 surface finished fair and even for laying floor finishes complete all as specified and directed. |
| 40 | M&Lfor glazed ceramic coloured tiles450 x 350 x 7 mm thick on vertical surface such as dado / skirting / risers to steps etc jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including rendering 10 mm thick in cement mortor 1:4 complete all as specified and directed. |
| 41 | S&F pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed. NOTE:The quoted unit rate under this item shall deemed to be include one shop coat of primer. |
| 42 | M&L for PCC 1:3:6 type C-1 (using 20mm graded aggregate) as in hold fast block including necessary form work etc complete all as specified and as directed. |
| 43 | S&F 35mm thick factory made, 2nd class hard wood, plain framed, factory made panelled shutter ( two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered partical board Timber flat on both faces,( feather edged)the size of rail and styles as per IS: 1003 ( Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 44 | S&F of 2nd class hardwood factory made 30 mm thick, glazed and skeleton door shutters, open rebated and prepared to receive glass gauze etc (with sash bars) edges of framing plain, chamfered or rounded materials and revated sash bars any number , edges of framing plain chemfered or rounded fitted with cut and mitred beads for securing glass in door etc or provided with styles and rails as specified in SSR part 1 section8, clause 8.23 (a) and fitted to chowkats complete all as specified and directed . |
| 45 | S&F 250mm long MS stove enamelled black finished, sliding door bolt withhasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections suitable for use with pad lock complete all as specified and directed. |
| 46 | S&F 150mm longMS stove enamelled black finished barrel tower bolt of extruded section, fixed with screws complete all as specified and directed. |
| 47 | S&F 150mm size Aluminium handle,cast type, anodised, fixed with screws complete all as specified and directed. |
| 48 | S&Fdoor stopper aluminium anodized white dale 40mmx40mm and 2mm thick length 150mm having rubber bush 25mm dia long (high) fixed to door shutter with steel screwcomplete all as specified. |
| 49 | S&F factory made Z sectionsteel windowwith side hung shutter frame includingprojecting/ boxtype hinge with steel handle and steel peg stay,etc. completewith glazing bars , dovetailed or welded including a shop coat priming complete all as specified and directed. |
| 50 | S&F factory made Z sectionsteel windowwith side hung shutter frame includingprojecting/ boxtype hinge with steel handle and steel peg stay,etc. completewith out glazing bars , dovetailed or welded including a shop coat priming complete all as specified and directed. |
| 51 | S & F Mild steel work in framed work such as in gates,grills, Framed guard bars, gratings, ladders etc., with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confirming to Fe 290 Gde E-165.complete all as specified and directed. |
| 52 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 53 | S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed. |
| 54 | S&F factory made Z sectionsteel ventilator with top hung shutter frame includingprojecting/ boxtype hinge with steel handle and steel peg staycompletewith glazing bars , dovetailed or welded including a shop coat Red Oxide priming complete all as specified and directed. |
| 55 | M&L for preparing of newly plastered surfaces of wall including cornices etc by brooming down applying two coats of antifungal exterior acrylic emulsionpaint over a coat of acrylic primer over one coat of wall care putty complete all as specified and directed. |
| 56 | M&L for preparation of newly plasteredsurfaces wallandapplyingtwo coats of oil emulsion Distemper over one coat of cement base putty complete all as specified and directed. |
| 57 | M&L for preparation of new surface of steel and iron of any discription, not otherwise described, over 10cm in width or girth and applying two coats of synthetic enamel paint, white or tinted complete all as specified and directed. |
| 58 | M&L for preparation of newly plastered surfaces of walls and applying three coat of white wash complete all as specified and directed. |
| 59 | S&F factory made Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube, supplying and fixing in opening with fittings as per specification & drawing complete all as specified and directed. |
| 60 | S&F, factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain cover PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rails lock rail and bottom rail on either side & as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement and supply & fixing in the frame at site as per specification and shown on drawing SSR Part-II (2004) all as specified complete all as specified and directed. |
| 61 | S&F Butt hinges, medium weight, cold rolled mild steel 100 mm long complete all as specified and directed. |
| 62 | S&F aluminium, anodised, barrel tower bolts of extruded section 100 mm long complete all as specified and directed. |
| 63 | S&F aluminium handles cast type anodised of 100 mm size complete all as specified and directed. |
| 64 | Taking up or down steel tubing and connections including cleaning if refixingrequired for 15 mm bore of pipe complete all as specified and directed. |
| 65 | Taking up or down steel tubing and connections including cleaning if refixingrequired for 20 mm bore of pipe complete all as specified and directed. |
| 66 | S& F 15 mm bore steel water tubes, medium grade, galvanised with all fitings and fixedto wall, complete all as specified and directed. |
| 67 | S& F 20 mm bore steel water tubes, medium grade, galvanised with all fitings and fixedto wall, complete all as specified and directed. |
| 68 | S&Fswivel shower roses of PTMT any colour for fixing withshower arm15mm pipecomplete all as specified and directed. |
| 69 | S&F of PVC 75 mm bore (SWR) pipes single socket, in any length with rubber ring joint, laid in tranches or in floor,complete all as specified and as directed. |
| 70 | S&F of PVC 110 mm bore (SWR) pipes single socket, in any length with rubber ring joint, laid in tranches or in floor, complete all as specified and as directed. |
| 71 | S&F ofPVC (SWR) bend any radius suitable for 75 mm bore PVC pipe jointed with solvent complete all as specified and directed. |
| 72 | S&F PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipewith access door complete all as specified and directed. |
| 73 | S&F ofPVC (SWR) bend any radius suitable for 110mm bore PVC pipe jointed with solvent complete all as specified and directed. |
| 74 | S&F ofPVC (SWR) Gully trap any radius suitable for 125/110 mm bore PVC pipe jointed with solvent complete all as specified and directed. |
| 75 | S&F vitreous china EWC white with \"P\" or \"S\" trap front or back inlet any pattern including plastic water closet seat cover closed pattern with flat bottom and cover and hinging complete and making good to floor complete all as specified and directed. |
| 76 | S&F Vitreous china wash basin, white, flat back, size 550 x 400 mm, including pair of brackets and cuttingand pinning in ends of brackets,32mm dia CP waste Coupling,32mm dia and 450 mm long Waste pipe, complete all as specified and directed. |
| 77 | S&F PVC low level syphonic actionflushing cistern of 10 lit capacity including siphon, PVC float with ball valve, flush pipe rubber cone and flush pipe,Brackets,32mm borePVC connection pipe etc complete all as specified and directed. |
| 78 | S&F of PVC Connection pipe 15mm size with PTMT nuts at both ends of length 600 mmcomplete all as specified and as directed. |
| 79 | S&F stop valves fancy type cast copper alloy, chromium platedfor 15mm bore pipe, screwed both ends including necessary fittings all complete as specified and as directed. |
| 80 | S & F 15 mm dia bib tap cast copper alloy (fancy type), chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule all as specified and as directed. |
| 81 | S&F 600 x 450m bevelled edge mirror of thickness not less than 8 mm of selected quality glass mounted on wall with spacer not less than 10 mm dia and length not less than 40 mmmounted on wall with stainless steel tapered head nut of appropriate size complete all as specified and asdirected. |
| 82 | S&F Tubular towel rail of brass chromium plated, 20mm dia, D type, 60cm long between flanges, fixed in repairs complete all as specified and directed. |
| 83 | M&L for 75mm dia PVC (SWR) floor trap plain with gratingincluding jointing with solvent cement and proper bedding and jointing with existing pipe complete all as specified and as directed. |
| 84 | Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete ) set in cement mortor for 150 mm internal dia of pipe complete all as specified and directed. |
| 85 | M&L for salt glazed stone ware drain pipe grade-A, conform to IS-651-1980, 150mm dia laid in trenches and jointed in cement mortar (1:1) complete all as specified and as directed. |
| 86 | M&L for 100mm thick concrete bed to drain pipe (150mm bore) with PCC (1:3:6) type C2 using 40mm graded stone aggregate including packing under and haunching aginnst the sides of pipe after they are laid jointed and tested complete all as specified and as directed. |
| 87 | M&L for75mm thick plain cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection and footpath finished even and smooth without using extra cement, including making jointsto the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:2 by weight complete all as specified and as directed. |
| 88 | S&F of rotational moulded,Three layer HDPE water storage tank of 1000 ltrs capacity (Cylindrical vertical with closed top)ISI (IS 12701-1996) marked fixed in position on existing places complete all as specified including 02 Nos 20mm dia full threaded UPVC tank niple, 20 mm dia brass ball valve with epoxy coated Aluminium rod with high density plastic float ball( of minium weight 210 gms ) including fixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed. |
| 89 | M&L for machine pressed ,pre-polished and chemically treated, smooth finished ,exterior graded coloured cement concreteChequered tiles20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floorsover and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed. |
| 90 | S&F of Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 30cm long, Diameter of shank 11 to 15 mm complete all as specified and directed |
| 91 | Surface excavation n exc 30cm deep and average 15cm deep and getting out in soft/ loose soil complete all as specified and directed. |
| 92 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth for foundation etc. or for shafts, wells cesspits manholes pier holes etc not exceeding 10 sqm on plan and not exceeding 1.5 m depth insoft /loose soil etc complete all as specified and directed |
| 93 | Returning, filing in, including spreading, levelling, watering and well rammingin layers not exceeding 25 cm in any type of soil etc complete all as specified and directed |
| 94 | Removal of excavated materials not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting points etc complete all as specified and directed |
| 95 | S&F Vitreous China bowl urinal flat back, size of 430 x 370 x 340 mm white (minimum), with grating and union for discharge pipe including waste pipe complete all as specified and as directed. |
| 96 | S&F of pillar taps 15mm bore, fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly nuts, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 97 | M&L Bricks, sub class B, laid flat, in floors, old size bricks bedded and jointed in CM 1:6 and pointed in cement morter 1:3 complete all as specified and directed. |
| 98 | M&L for Machine cut kota stone slab flooring mirror finished 18-20mm thick (each slab not less than 0.25 sqm) over cement screed base rendering laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing andpolishing and 15 mm thick screed bed or bedding layer in CM 1:4 surface finished fair and even for laying floor finishes complete all as specified and directed. |
| 99 | M&L for Machine cut kota stone slab flooring mirror finished 18-20mm thick (each slab not less than 0.25 sqm) on vertical surface such as dado / skirting / risers to steps etc jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing andpolishing and 10 mm thick screed bed or bedding layer in CM 1:4 surface finished fair and even for laying floor finishes complete all as specified and directed. |
| 100 | M&L for preparation of newly plasteredsurfaces of wallandapplyingtwo coatsof cement base paint over a coat of white cement base primerincluding cleaning glass, joinery,electrical fittings, wiring etc., of drops and splashes complete all as specified and directed. |
| 101 | S&F Providing precast cement concrete louvres and jallies, 50mm thick (measured solid), in cluding all mouldings but excluding frame in cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregates and set in cement morter 1:4 complete all as specified and directed. |
| 102 | M&L for 100mm thick PCC 1:2:4 type B-1 using 40 mm graded stone aggregate as in base course complete all as specified and directed. |
| 103 | Excavating in hard/dense post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,complete all as specified and directed |
| 104 | S&F cement concrete type C2 1:2:4 (using 40mm graded stone aggregate) walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases)complete all as specified and directed. |
| 105 | INTERNAL ELECTRIFICATIONTaking down carefully aluminium conductor point wiring (light,fan,socket or power) completeincluding fittings such as switches,ceiling roses, pendants, regulators ,sockets etc. and removing(except those to be reused shall be kept in safe custodyat the site ) and making good disturbed surfaces of walls, floors etc.to match with the existing complete all as specified. |
| 106 | M&L point wiring completewith FRLS PVC insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including 20mm dia \"medium grade\" PVC concealed conduits and fittings, including cutting chasingin brick wall n.exc 10cm width or girth(excluding ceiling surface), pressed steel concealed terminal switch boxes not less than 1.2mm thick of reqd size factory made duly painted inside and outside with two coats of black bituminous paint over one coat red oxide primer, 3mm thick plastic laminatedsheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories including making good disturbed surfaces with CM(1:4) with treating the surfaces as per existing finishes complete all as specified and directed.(a) One light point controlled by one way switch 5/6 amps. |
| 107 | (b) One ceiling fan/Exhaut fan point controlled by one way switch 5/6 amps. |
| 108 | (c)One socket out let 5/6 amps point on the same board |
| 109 | (d)One socket out let 5/6 amps point on the independent board |
| 110 | (e)One bell/buzzer point controlled by one bell push botton |
| 111 | All as per item No105 above but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board complete all as specified and directed. |
| 112 | S&Fswitch piano flush type 5/6 amps single pole one way all as specified. |
| 113 | S&Fsocket 2 in 1, 5 Pin, 5/6 amps, white ivory finish flash type complete all as specified and directed. |
| 114 | S&Fswitch socket combination2 in 1, 3 Pin, 15 amps, white ivory finish flash type complete all as specified and directed. |
| 115 | S&Fof socket outlet 2 in 1, 5 Pin 5/15 Amp multipurpose 230 volt flush type complete all as specified and directed by Engr-in-Charge. |
| 116 | S&Fswitch piano flush type 15/16 amps single pole one way complete all as specified and directed. |
| 117 | S&Fbell/buzzer push 5/6 amps flush type white/ivory finish complete all as specified and directed. |
| 118 | S&F of call bell ding dong type AC single pole 220/240 Volts surface type complete all as specified and directed. |
| 119 | S&Fceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and directed. |
| 120 | M & L for lamp holder, insulated body, with back plate suitable for batten/anglefittings complete all as specified and directed. |
| 121 | S & F deluxe fan Electronic regulatorAC 50 Hzs rotary stepwhite/ivory finish complete all as specified and directed. |
| 122 | S & F Wall mounted slim LED batten 20W, with extruded aluminium housing, with integrated LED driver complete all as specified and as directed. |
| 123 | S & F Wall mounted slim LED batten 10W, with extruded aluminium housing, with integrated LED driver complete all as specified and as directed. |
| 124 | S&F High Power LED street light fitting ,system wattage-30 Watt, made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having IP65 protection and impact resistance of IK07 with 10KV built in surge protection device using 2.5 Sqmm PVC insulated three core copper cable including taking down all as specified and directed. |
| 125 | Supply and fixingLED light fitting mirror type 9/10 Watt with high withhigh output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed |
| 126 | Supply and Fixing MCB DB double door, powder coated sheet metal enclosure, 8 way 240 volts grade single pole and neutral with 200 amps rated bus bar,IP 43 protection fixed to wall using nuts & bolts and washer of suitable dia and grouted to wall using suitable gutties complete all as specified and as directed. |
| 127 | Supply and Fixing MCB DB double door, powder coated sheet metal enclosure, 4 way 240 volts grade single pole and neutral with 200 amps rated bus bar,IP 43 protection fixed to wall using nuts & bolts and washer of suitable dia and grouted to wall using suitable gutties complete all as specified and as directed. |
| 128 | S&F MCB triple pole & neutral 40 amp, 415 volts, \"C\" series, 10 KA breaking capacity & makingconnection complete all as specified and directed. |
| 129 | S&F MCB single pole & neutral 6 to 32 amp, 415 volts, \"C\" series, 10 KA breaking capacity & makingconnection complete all as specified and directed. |
| 130 | S&F MCB single pole, 6 to 32 amps rating, 240 volts, \"C\" series, 10 KA breaking capacity & makingconnection complete all as specified and directed. |
| 131 | Taking down carefully by unscrewing from boards/ outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, and regulators, etc. all as pecified and as directed |
| 132 | M&L for Earthing complete with galvanised steel plate electrode of size 600x600x6.30mm thick burried directly in ground with earth pit not less than 2.25 meter deep below normal ground level with top edge of plate not less than 1.5 meter below normal ground level connected to galvanised 4 mm dia earth lead by means of nuts bolts check nuts GI washers earth wire protected by galvanised iron pipe 15mm bore (Light grade) for building LT wall panelallas directed including concrete pit in PCC (1:3:6) type CI, precast RCC cover slab of size 30x30x10 cm with one handle for lifting made out of 8 mm diameter MS bar finnel wire mesh 20 mm bore galvanised iron pipe (medium grade) for watering charcoal or coke and salt in alternate layers necessary earth work in soft/loose soilwith and including taking down the old one complete all as shown in electrical plate No 3 of SSR Part I 2009 including testing on completion all as specified and directed. |
| 133 | S&F sub main wiring with single core FRLS PVC insulated unsheathed multistranded copper conductorconforming to IS 694 of size 4sqmm nominal cross sectional area,1100 v grade and two run of 4sqmm nominal cross sectional area FRLS PVC insulated unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including 25mm dia \"medium grade\" PVC concealed conduits and fittings,complete including taking down of old sub main wiring all as specified and directed.NOTE:- One unit length shall measured as two run of main wire and one run of conduit & earth wire. |
| 134 | S&F street light bracket, made out of GI pipe medium grade) 25mm bore, 1.2 m long bend to shape and fixing/grouting with wall using 2 Nos 25 x 5 mm size MS FI clamps with bolts, nuts & washers complete including drilling as necessary and two coats ofAluminium paint over a coat of Red oxide primer all as specified & directed. |
| 135 | S&F PVC Insulated screenedXLPE Insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of of size 16 sqmm 4 core , providing lugs, straight through joints as required complete including jointing material as required and making connection of LT cables , including dismantling & taking out defective LT under ground PVC cable from trenches, cutting and removing defective parts complete all as specified and directed.:-Note:- Excavation & earthwork,sand cushoining,brick protection & GI pipe shall measured and paid separately, |
| 136 | S&F PVC Insulated screenedXLPE Insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of of size 10 sqmm 2 core , providing lugs, straight through joints as required complete including jointing material as required and making connection of LT cables , including dismantling & taking out defective LT under ground PVC cable from trenches, cutting and removing defective parts complete all as specified and directed.:-Note:- Excavation & earthwork,sand cushoining,brick protection & GI pipe shall measured and paid separately, |
| 137 | M & L for sand cushioning with river Sand to underground cable (8 cm thick before laying and 15 cm thick after laying the cable punned to a thickness of 18 cm) complete all as specified and directed |
| 138 | Supply and laying sub class \"B\" bricks laid dry and flat across the length of cable for protection of cable complete all as specified and directed |
| 139 | M&Lfor GI tubing 40 mm bore ,light grade with all necessary fittings laid in trenches/under road crossing/fixed on pole/wall/under floor including suitable mild steel FI clamps of required size complete all as specified and directed. |
| 140 | Taking down fan, sealing cable end, dismantaling blades and removing fan and blades painting of ceiling fans complete, in situ with synthetic enamal paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed.Note:- MES NO. of dismantaling fan shall be shown in measurment book. |
| 141 | S&F exhaust fan of 380mm sweep A/C single phase 230/240 volts heavy duty complete with fan motor, blade, bracket and ring including grouting anchor bolts and making good to disturbed surfaces to match the existing complete including provision of PVC insulated & PVC sheathed round flexible cable of copper conductor,Three core of size 0.5 sqmm from ceiling rose to connector of fan, surface of the wall shall be made good by cement work/plastering and matching by existing colour ,all the metal part shall be painted two coats of synthetic enamel paint over a coat of primer, writting the MES no. with white colour paint complete all as specified and directed. |
| 142 | S&F exhaust fan of 250mm sweep A/C single phase 230/240 volts heavy duty complete with fan motor, blade, bracket and ring including grouting anchor bolts and making good to disturbed surfaces to match the existing complete including provision of PVC insulated & PVC sheathed round flexible cable of copper conductor,Three core of size 0.5 sqmm from ceiling rose to connector of fan, surface of the wall shall be made good by cement work/plastering and matching by existing colour ,all the metal part shall be painted two coats of synthetic enamel paint over a coat of primer, writting the MES no. with white colour paint complete all as specified and directed. |
| 143 | Supply installation, commissioning and testing of electric water heater, storage vertical type, BEE 5 star rated 25 ltrs capacity 230 volts AC 50 Hz comprising of high wattage heating element for instant heating extra thick SS inner tank of superior 304 grade, rust & shock proof ABS outer body, non- ferrous pressure plate with and including provision of 04 Nos grouting bolts suitably flush to wall or any other surfaces and connection pipe for hot and cold water supply 25 lts BEE 5 Star rated complete stranded copper conductor cable/ flexible chord complete all as specified and as directed. |
| 144 | S& F25 mm bore steel water tubes, medium grade, galvanised with all fitings and fixedto wall, complete all as specified and directed. |
| 145 | S&F Gun matel gate valve with iron wheel head screwed both ends for iron pipe for 25 mm bore, complete all as specified and as directed. |
