|
| 1 | Supplying & Installationof Sign board at Gate no.-3 &Decorative Gate lightingalso including APJ Auditorium hall Sign board along with necessaryEI works. |
| 2 | Supplying&fixingsquare shapedfabricated GI structure ( 2.5ft x 29.5 ft+ logo 2.5 ft x 2.5ftTotal 72.5 sq.ft in additiona for logo 6.25 sq.ft)made withthe 40x40x6mm GI angle6 nos2.5. ft longeachfor vertical supportat5.9 ft interval and also Horizontal support for top & bottom made with 40x40x6mm GI angle29.5 ft long - 2 nos and 14 SWG / 2.0 mm thick25 mm innerdia GIpipe 29.5 ft long x 4 nos for horizontal supportin cluding letter fixing support and clearance of each pipe 10 inch /250mmand alsologo structure 2.5 ft x 2.5ft made with 25mmdia 14 SWG GI pipeas per instruction of EIC / as required . TheGI structure should be fitted on the roof topby making \" T\"shaped GI angle structure& itto be fixed on the roof top of the gatewith the suitable fastner (10 mm dia x 75 mm long) / grouting nut bolts ( 10 mm x 75 mm) with anti rotating facility / as requiredincludingall necessary fixingmaterials and fabrication job complete alsoincludingS&F letter fixingscrews etc as required. |
| 3 | Supplying & Fixingof superior Malaysia imported quality acrylic threedimensional letter flushed on the pre-fabricated existing GIstructure with necessary materials.The computerized processedletter in bold English fonts (Aeonik bold)as per suppliedmatter by the EIC / Authorityandthe all lettersshould be milky white in colour & transparentwith0.40 white light glow & side blackshall be placed/ fixed in horizontal line maintanining suitable space with male & female attachments for each letter on theGI angle structureincluding necessary interconnectionswith thePower supply unit / SMPS as per direction of the EIC.The probable matter fonts isgiven below: UNIVERSITY OF KALYANI withlogo &Estd 1960 .(Final Matter to be provided during execution of Job.)(,Height of letter 24 inches , width -4 inch, thickness 3 mm, No.of Letters - 19 &Depth of letter 3 inch ) ,Total- 24X 19= 456 inch. (Approx) |
| 4 | Supplying & fixingECO VINILY Print& pasting withthe superior Malaysia imported quality3 mm thick acrylic sheet (LOGOpesting) includingEsted 1960.Size of Logo = 30 inch x 30 inch = 900 sq. Inch ., also Depth of Logo - 3 inch includingS&F 12V DC 1.5W sufficient / attaractive (White) intesityof Sumsung make LED Module . |
| 5 | Supplying & fixing imported heavy duty having IP - 53 , 12 Volt DC500WPower Supply Unit / SMPSMakeMAXINDIA2 years warranty facility (Input VoltageAC 180 -260 Volt, 50 / 60 Hz , 2.8 - 3.5A , Output Voltage - DC 12V+ / - 5 % ,41.7A (CV)& Output Power (Pout) (W) - 500 with provision ofisolation transformer , over voltage , over current& short circuit protectionin fully waterprotected /suitable water proof enclosure to be fixed with the signage frame for driving total LED system of thesignage in aequal distributed maner for uniform load sharing / as per instruction of EICin view of long run continuous use including necessary interconnections. (NB-water prooftypeextra enclosure should be provided for additional protection of Power Supply Unit / SMPS made with Acrylic sheet ) |
| 6 | Supplying & fixing imported 12Volt 1.5W DC LED modules having three LED in a Single base Module and LEDs will be emitted attractive white (CDL)colour and the two run of LED for each letterfrom starting end to finishing end/totalarea of the matterand shall be fixed properlyin the male part of the Acrylic letters including necessary inter connections complete(For Actual/ PribableMatter UNIVERSITY OF KALYANI& LOGO & Ested 1960 ) Specification of the LEDs is given below : a) LED-white (Attractive White) CDLSAMSUNGmakeIP - 68 , 3 years warranty facility , HI RYTE/ SASO b) Type - Straight , & 3 Nos. Led per modulec) Life – 70,000 burning hours.d) Visibility – 100 mtrs at least, for normal eyee) Power consumption - 1.5 Watt per module f) Input - 230V AC , Output 12V DC ( For double layer LED) |
| 7 | Scffolding arrangement for working at 2nd. Floor level height of the building by making suitable heavy type scaffolding (Size 30 ft. Wide x 22 ft height) by bamboo,ropes & wooden planks etc. to be provided for execution of job and after completion of job it to be diamatled / as per direction of EIC. , |
| 8 | Transportation Up & Dn.carrying charges of the above mentioned Acrylic letters and all others requiredaccessoriesshould be carryingcarefully from Company`s workshop to site and work siteto company`s work shop for residual accessiries. |
| 9 | Supply & drawing of 1.1 kV Gr. PVC insulatedsheathed 3 Core2.5 sq.mm cu. Wire Gloster / Finolex / PolycabFlat/ Roundcable ,(for Power supplyunitACinputsource.) . |
| 10 | Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level by ISI Medium GI pipe as to GS( 2 a / G1 ) |
| 11 | S&F earth busbar of galvanized (Hot Dip) MS flat 25x6mm on wall having clearance of 6 mm from wall incl. providing drilled holes on the busbar complete with GI bolts, nuts, washers,spacing insulators etc. as reqd.as to GS (4 a / G - 2) |
| 12 | Connecting the equipments body to earth busbar including S&F 25 mm x 6 mm galvanised Hot Dip MS flat on wall / floor with GI Saddles / floor cutting/ existing `L` hook as required and connecting to the equipments including drilled holes with bolts , nuts , washers etc. complete including mending good damages to finishas per GS[ G 3 / 5d ] |
| 13 | Supplying and fixing PVC Rigid Conduit \"FR\" Precision Make mediumon wall, ceiling with saddles and other accessories as required and mending good damages to building works as per GS. 20mm size [ 7(a)/ E- 16 ] |
| 14 | 25mm size [ 7(b)/ E- 17 ] |
| 15 | 32 mm size (NS) |
| 16 | Supplying & fixing 3 hole facility CI water proof type looping cable box size 200 x 150 x 100 mm deep having hinged CI top cover with 4 mm thick rubber gasket lining railway type mechanical locking arrangement earthing terminal , porceline fuse etc complete. fixed on wall with Iron frame / concealed / as per position with necessary materials ..[ NS ] |
| 17 | Laying ofGI Pipe 40 / 50 mmas below , after cuttingtar road / floor / pavement / wall /tiels and making holes including embdding the pipesat an average depth300mm as below and mending good the damages to originalfinishby CC morter 5:1 ratio including removing the rubbish . |
| 18 | Supplying & fixing medium gauge GI pipes (ISI - Medium)protection with necessaryfittings and jointing materials as requiured(F-6 / 11. c)40 mm dia |
| 19 | 50 mm dia |
| 20 | Supplying & FixingIP 65 230V 50 Hz 100W LED flood loight (Decorative colour changinglight) 2 years warranty facilityDiamond make in the existing fabricated grilledstepped typebase of the fabricated box including makingfitting fixing & connection complete ., |
| 21 | Supplying & fixing fabricated GIgrilled box stepped type that which LED set to be rest by nut bolt( Bottom portion)& size of the fabricated box650x650x350mm approx for accommodating 3 nos. 100W flood light , the box should bemade with 40x40x6mm GI angle & 20x6mm GI Patti / flatincluding4nos split typeleg 300 mm longeach that to be grouted on the tar road by cuttng / drilling as required& filiing CC morter , out of 6 sides of the box 5 sides covered with the 20x6 mm flat at 25mm gappinghorizontally & top portion 20x6 mm flat should be rest vertically & maintaing gap 35mm (approx)/ as suitable / as per instruction of EIC. |
| 22 | Supplying and fixingcompression type gland complete with brass gland , brass ring & rubber ring for dust & moisture proof entry of XLPE / PVC armoured cables as below Dowels make gland.as per GS 4 Core 16 Sq. mm [7(c)/F4 ] |
| 23 | Finishing of the XLPE / PVC insulated armoured cable ends by crimping method incl. supplying & fixing solder less socket Dowelsmake , tapes , anticorrosivepaste & jointing materialsas per GS. 4Core16 Sq. mm Dowels make [ 8(b) /F5 xii] |
| 24 | Supplying & delivery1.1 KV grade XLPE insulated Aluminium Armoured Power cable Gloster makefollowing sizes - 4 core 16 sq.mm |
| 25 | Laying of cable 2 core 25 sq.mm and upto 4 core 16 sq.mm on wall / surface including S&F MS saddles double screw typewith earthing attachment in 2 x 10 SWGGI (Hot Dip) wire making holes etc as necessary including mending good damages and finish. (F-1 / 2.a) |
| 26 | Supplying & fixing fabricated CPRI approvedindoor wall mounted type double door systemtimer control type panelboardmade with 16 SWG sheetfixed on wall with35x35x6mm angle iron frame, size of the panelbox -800x400x200mm (LxWxD) approx having withelectrical accessories 63A OE type L&T make SFU with 3 nos Din type HRC fuse - 1 no. cat no.- FN 63 TPN/ FP SK95421 , 3 pole MNX - 32A Power Contactor L&T make - 1 no. having 230V magnet coil facility, 24 hours Analog type timer GIC make - 1 no. ,Selector switch 16A KACEEY make for Auto / Manual mode - 1 no. , 63A 4 pole Isolator Siemns make - 1 no.,SP MCB 10KA C characteristic - 16 nos. ( 1 no. for timer feeding , 12 nos for out going feeder & 3 nos for LED indication control) , Neutral bar , earth bar &SP MCB output receivimg & deliveryterminal block - 12 nos,R Y B LED indication Lamp L&T / Siemens make , main wirrings should be use 16 sq. mm Cu. wire Polycab / Gloster / Finolex for SFU to power contactor ,Power contractor to 4P 63A Isolator &4P isolator to SP MCB 3x4nos . 2.5 Sq. Cu. wire for Selectot switch & 1.5 sq.mm Cu. wire for Indication Ckt.and allsizes of Cu. endsshould beSocketed properlyby Dowel make Cu. socket etc as required and the hole panel should be painted powder coated Siemens grey9 tans treated . |
| 27 | Supplying & fixingspike earthingby 20 mm dia 6 ft. longGI earth electrode incliuding nut bolts & washers complete. |
| 28 | Connecting the equipments to eart electrodeincluding S&F GI Hot Dip wire of sizesbelow on wall / flooras required and making connection to equipments with bolts nuts washers cable lugs etc. as required and mending good damages to possible finish. No. 6 SWG |
| 29 | No. 4 SWG |
| 30 | PART - B A.P.J. ABDUL KALAM AUDITORIUM SIGNBOARD. |
| 31 | Supplying&fixingsquare shapedfabricated GI structure ( 2.5ft x 29.5 ft+ logo 2.5 ft x 2.5ftTotal 72.5 sq.ft in additiona for logo 6.25 sq.ft)made withthe 40x40x6mm GI angle6 nos2.5. ft longeachfor vertical supportat5.9 ft interval and also Horizontal support for top & bottom made with 40x40x6mm GI angle29.5 ft long - 2 nos and 14 SWG / 2.0 mm thick25 mm innerdia GIpipe 29.5 ft long x 4 nos for horizontal supportin cluding letter fixing support and clearance of each pipe 10 inch /250mmand alsologo structure 2.5 ft x 2.5ft made with 25mmdia 14 SWG GI pipeas per instruction of EIC / as required . TheGI structure should be fitted on the roof topby making \" T\"shaped GI angle structure& itto be fixed on the roof top of the gatewith the suitable fastner (10 mm dia x 75 mm long) / grouting nut bolts ( 10 mm x 75 mm) with anti rotating facility / as requiredincludingall necessary fixingmaterials and fabrication job complete alsoincludingS&F letter fixingscrews etc as required. |
| 32 | Supplying & Fixingof superior Malaysia imported quality acrylic threedimensional letter flushed on the pre-fabricated existing GIstructure with necessary materials.The computerized processedletter in bold English fonts (Aeonik bold)as per suppliedmatter by the EIC / Authorityandthe all lettersshould be milky white in colour & transparentwith0.40 white light glow & side blackshall be placed/ fixed in horizontal line maintanining suitable space with male & female attachments for each letter on theGI angle structureincluding necessary interconnectionswith thePower supply unit / SMPS as per direction of the EIC. Theprobable matter fontsis givenbelow :A.P.J. ABDUL KALAM AUDITORIUM withlogo &Estd 1960 .( Final Matter to be provided during execution of Job.)(,Height of letter 20 inches , width -3 inch, thickness 3 mm, No.of Letters - 23 &Depth of letter 3 inch ) ,Total - 20X 23= 460 inch. (Approx) |
| 33 | Supplying & fixingECO VINILY Print& pasting withthe superior Malaysia imported quality3 mm thick acrylic sheet (LOGOpesting) includingEsted 1960.Size of Logo = 30 inch x 30 inch = 900 sq. Inch ., also Depth of Logo - 3 inch includingS&F 12V DC 1.5W sufficient / attaractiveintesityof Sumsung make LED Module . |
| 34 | Supplying & fixing imported heavy duty having IP - 53 , 12 Volt DC500WPower Supply Unit / SMPSMakeMAXINDIA2 years warranty facility (Input VoltageAC 180 -260 Volt, 50 / 60 Hz , 2.8 - 3.5A , Output Voltage - DC 12V+ / - 5 % ,41.7A (CV)& Output Power (Pout) (W) - 500 with provision ofisolation transformer , over voltage , over current& short circuit protectionin fully waterprotected /suitable water proof enclosure to be fixed with the signage frame for driving total LED system of thesignage in aequal distributed maner for uniform load sharing / as per instruction of EICin view of long run continuous use including necessary interconnections. (NB-water prooftypeextra enclosure should be provided for additional protection of Power Supply Unit / SMPS made with Acrylic sheet ) |
| 35 | Supplying & fixing imported 12Volt 1.5W DC LED modules having three LED in a Single base Module and LEDs will be emitted attractive whiteCDL colour and the two run of LED for each letterfrom starting end to finishing end/totalarea of the matterand shall be fixed properlyin the male part of the Acrylic letters including necessary inter connections complete(Forprobable matter Fonts) A.P.J ABDUL KALAM AUDITORIUM , LOGO & Ested 1960) Specification of the LEDs is given as below :a) LED-white (Attractive White)CDL SAMSUNGmakeIP - 68 , 3 years warranty facility , HI RYTE/ SASO b) Type - Straight , & 3 Nos. Led per modulec) Life – 70,000 burning hours.d) Visibility – 100 mtrs at least, for normal eyee) Power consumption - 1.5 Watt per module f) Input - 230V AC , Output 12V DC (Doublelayer LED) |
| 36 | Scffolding arrangement for working at 2nd. Floor level height of the building by making suitable heavy type scaffolding (Size 30 ft. Wide x 22 ft height) by bamboo,ropes & wooden planks etc. to be provided for execution of job and after completion of job it to be diamatled / as per direction of EIC. , |
| 37 | Transportation Up & Dn. Carryingcharges of the above mentioned Acrylic letters and all others requiredaccessories carryingcarefully from Company`s workshop to site and work siteto company`s work shop for residual accessiries. |
| 38 | Sypply & Drawing of 1.1 kV Gradesingle core stranded FRLSH / FR PVC insulated &unsheathed single core stranded copper wire Gloster / Finolex(Gold) / Polycab of follwing sizes in the pre laid polythene pipe and making connection complete.2x36/0.3(2.5 sq.mm) + 1x22/0.3 (1.5 Sq.mm) as ECC. |
| 39 | Supplying & fixingfollowing 415VTPN SFU Seimens makeincluding 3 nos. HRC din type fuseas per ratingon wall with iron frame / concealed ncluding mending good damages & finish. (NS) 415V 100A TPN SFU Cat. No.- 3KL8211-5TA10 |
| 40 | Supplying and fixing sheet steel 16 SWG cable end box on TPN SFU Enclosure with nut bolts etc. Including powder coated painting . 63/125A FU [D-5/5] (63A - 1no.) |
| 41 | Supplying &delivery of4 Core XLPEInsulated & Sheathed Armoured Aluminium power cables for Working Voltage up to 1100 Volts of following sizes . NS [ Make Gloster] 4 core 35 sq.mm. |
| 42 | Laying ofone No. cableupto 35 sq.mn in under ground trench 460x 760 mm average depth with brick protection on the top of the cable with 8 ( eight) nos. bricks per mtr. includingroadboaring alsofilling the space between the bricks andcables also the trench with shifted soil , leveling up and restoring surface properly.Upto 35 sq.mm(F-2 / 1. a) |
| 43 | Laying of cable from3 / 3.5 / 4 Core35 sq.mn to 50 sq.mmon wall /surface including S & F MS Saddles heavy typedouble screw type with earthing attachment in 2 x 10 SWG GI (Hot Dip) wire, making holes etc as necessary , mending good damages and possible finish. (F-1 / 2.c) |
| 44 | Supplying & fixing heavy type Dowlesmake compression type gland complete with brass gland, brass ring & rubber ring for dust and moisture proof entry of followingXLPE/PVC Al. Armoured cables .-4 Core35 Sq. mmDowels make [7(c)/F4 ] |
| 45 | Finishing the end offollowing XLPE Al. armoured cable by crimping method includingsupplying & fixing solder less socket Dowels make , tapes , anticorrosive paste etc complete.4Core35 Sq. mm Dowels make [ 8(b) /F5 xviii] |
| 46 | Supplying & fixing CPRI approved IP56fabricatedground fixing sytem Analogtype 24 Hrs timer control feeding pillar box both side working facility ,2 part type hinged doorsystem& self lockingarrangementwith almirahtype handlehaving middle separator provision made with 16SWG (1.66 mm thick)sheet ,except saperatorallthrough the box shouldbe made with 12SWG sheet andback sideremain only 415 V 200A Copperbusbar 650mm long (25x5x650mm) for R Y B & N and 63A 4poleMCB Isolato Siemens make -3 nos.and3nos 4 wayterminal block ,& front part will remainallcontrol accesorieslike415 V 100AOEtype SFU handel , 24 Hrs Timer , 3 pole power ContactorMNX 32 with 230 Volt magnet coil (Holding Coil) facility, Siemens make10kA C series 32A 4 pole MCB - 1no.,SP MCBs10 KA C serieSiemens make (6-32A) - 16 nos , 63AFP pole Isolator Siemens make - 1 no., 10A Selector SwitchKacyee / L&T make , 3 nos R , Y& BLEDindicationL&T / Siemens makeetc as required and thesize of the timercontrol feeding pillar box -950 x 750x 600mm (approx)(HxWxD)with 40x40x6mmangle iron frame & 900 mm long4 nos leg, the accessories should beproperly wired with6 sq.mm Cu. wire / 32A capacity Copper wire (As per instruction of EIC)& also required size Cu. wireFinolex / Gloster make, the controlling feeder pillar box should be painted with9 tanks treated powder coated paint SIMENS GREYRAL - 7032type and the details of pillar box& accessories given below -Size of the Control Panel / pillar box -950x750x 600 mm (approx)made withall through 12 SWG sheet(2.5mm thick) except separator (16 SWG) both side working facility , 2 part type hinged doorboth side top &bottomself locking facility with Almirah type handel - 2 nos both side ,including middle separator2 nos. Size of the 415V Cu. busbar - 25x5x650 mm (approx)for R Y B & Nmade with electroliting graded Cu. bar / flat& the bars should be covered with the heat shrinkage PVC coloured cover / Sleeveas per norms & also required size sufficient nos. drilled holes & nut bolts complete. The bars of the busbar should be fixed rigidly with self supporting structure & on the 1100V grade 200A cap[acity DMC / bakelite insulator insulator base/ FRP chair . The panel box should be9 tank treated powder coatedsynthetic enamel paintalso having rain guard facility 100mm longfrom the body of the control panel box surrounding the top , ventilation facilityboth side , earthing & danger board facilityboth side. Fabrication should be made as per instruction of EIC / as per supplied drawing and all opening will be covered with the rubber Gasket.. Back side of the pillar box will remain onlyCu. Busbar 415V 200A capacity 650 mm long for R Y B & N (25x5x650 mm x 4 nos.), 4 Pole 63A MCB Isolator - 3 nos &4 way terminalblock - 3 nos. including wiring with the 6 sq.mm Cu. wire . Front side will remain all controlling accessorieas stated like 415V 100A L&T make SFU handel portion , Siemens makeC Series4 Pole 32A MCB - 1no,4P 63A MCB Isolator - 1 no,SP MCB - 16 nos (1 no. for timer input , 3nos. for LED indication light. & 12 nos for 3 Phase circuit / 3 phase distribution like TPN DB ,24 Hrs.Analog type Timer , 3 pole power Contact , LED indication Lamp - 3 nos , 10A selector Switch - 1 no. Kaycee / L&T make , Neutral Bar 20 Way , Earth Bar - 20 Way - 1no. |
| 47 | Panel box Shouldbe wiredproperly with 6 sq.mm /32A capacity 1100V grade FR / FRLSH Copper wire Finolex / Gloster make for all incoming accessoriesand another part should bewired required size Cu. Wire / as per instruction of EIC and also all wire ends should be socketed required size Cu. lugs Dowells make including tapping complete.The frame / base / chair of control panel made with 40 x 40 x 6 mm MS equal angle having having no stagnation of rain water facility and 900 mm long 4 nos. leg that should be anti lifting facility including double coated painting .415V100 AOEtype SFUL&T make (FN 100 TPN ) Cat no. SK 95568 withdin type fuse as per rating of SFU.. -1 no. The 415V 100A SFU should be connected with the main busbar by the same size Cu. Bar i.e. 25x5 mm size Cu. Bar / flat .3 Pole Power Contact MNX 32 L&T make Cat no.- CS94111 having coil voltage 240V50 Hz..Siemens make - C Series 10KA 32A 4 Pole MCB - 1no. , SP MCB 6-32A - 16 nos.. and63A FP Isolator - 4 nos. Analog type GIC make 24 Hrs Timer - 1 nohaving MCB control input ., Selector switch 10AKaycee / L&Tmake - 1 no. , LED type indicating lamp R ,Y& B - 3 nos. L&T / Siemens makethrough MCB control .Neutral bar - 15 way - 1no. ,15 way Earth bar - 1 no. , DIN rail, required sizeGI nut bolts & washers , 1100 Voltgradecoloured heat shrinkage cover / Sleeve , Danger Board ,Earthing provision & both side 2 part type hinged door having top & bottom self locking arrangement .The complete panel board should be painted with 2 coats of power coated 9 tank treated synthetic enamel paintalso provision ofEarth bus , danger board etc as required as per system.Supplying and fixing PVC Rigid Conduit \"FR\" Precision Make mediumon wall, ceiling with saddles and other accessories as required and mending good damages to building works as per GS. |
| 48 | 25mm size [ 7(b)/ E- 17 ] |
| 49 | 32 mm size (NS) |
| 50 | Supply & drawing of 1.1 kV Gr. PVC insulatedsheathed 3 Core2.5 sq.mm cu. Wire Gloster / Finolex / PolycabFlat/ Round for Power supplyunitACinputsource. . |
| 51 | Scffolding arrangement for working at 2nd. Floor level height of the building by making suitable heavy type scaffolding (Size 30 ft. Wide x 22 ft height) by bamboo,ropes & wooden planks etc. to be provided for execution of job and after completion of job it to be diamatled / as per direction of EIC. , |
| 52 | Transportation Up & Dn. Carrying charges of the above mentioned Acrylic letters and all others requiredaccessoriesshould be carrying carefully from Company`s workshop to site and work siteto company`s work shop for residual accessiries. |
| 53 | Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level by ISI Medium GI pipe as to GS( 2 a / G1 ) |
| 54 | S&F earth busbar of galvanized (Hot Dip) MS flat 25x6mm on wall having clearance of 6 mm from wall incl. providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as reqd. as to GS (4 a/G - 2) |
| 55 | Connecting the equipments body to earth busbar including S&F 25 mm x 6 mm galvanised Hot Dip MS flat on wall / floor with GI Saddles / floor cutting/ existing `L` hook as required and connecting to the equipments including drilled holes with bolts , nuts , washers etc. complete including mending good damages to finishas per GS[ G 3 / 5d ] |
| 56 | Laying of 1/2/3/4/5/6/7 nos& 20 / 25 / 32 mm diaPVC rigid conduitPrecission make Medium / 4 Core 6 sq.mm XLPE Armoured cablein a single under ground trench 460 mmwide x 450 mmaverage depthincluding pavement / road boaringwith brick protection on the top of the PVC rigid conduitwith 8 (eight) nos. bricksPer mtr , including filling the space between the bricks & PVC rigid conduitsand also the trench with shifted soil , levelling up and restoring surface duly rammed. (Used for Landscape Lighting Feeding &Shade lighting feeding route) (NS) |
| 57 | Supplying & fixing medium gauge GI pipes (ISI - Medium)protection with necessaryfittings and jointing materials as requiured(F-6 / 11. c) 40 mm dia |
| 58 | Supplying & fixing podium logo with Samsung LED Module with attractive whiteCDL in colour .( 10 inch x 10 inch) |
| 59 | Add Labour Cess 1% |
