Rural Development And Panchayats Department has published Construction Of Gausadan Cow Shed In The Campus Of Veterinary Hospital Takoli On Kh No 552 / 3 At Mohal Kotdadhar Gram Panchayat Kotadhar Tehsil Aut Development Block Balichowki District Mandi Hp Sh Construction Of Two No Cow Shets Common Urine Collection. Submission Date for this Tender is 12-09-2022. Shed Construction Tenders in Mandi Himachal Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Earthworkinexcavationbymechanicalmeans (Hydraulicexcavator)/manualmeans in foundation ,trenches ,drains (Any width or square metre on plan),inlcuding dressing of sides and ramming of bottoms,lift upto any height,including getting out the excvated soil and disposal of surplus excvated soil as directed in all kinds of classifications of solis such as pick work,jumper work,blasting work saturated soils including chiseling or any other mixed variety of soils,dewatering and/or removal of slush and other incidentasls within all leads and lifts complete in all respect as per directions and satisfaction of Engineer -in-Charge.Any loss to the public or private property during the course of excvation shall be the sole responsibility of the contractor which shall have to be duly compensated by him at his own cost in all cases including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer -in -Charge. |
| 2 | Excavating,supplyingandfillingoflocal earth (includingroyalty) by mechanical transport upto a lead of 5km (five kilometere) also including ramming and watering of the earth in layers not exceeding 20 cm (twenty centimeter) in trenches, plinth, sides of foundation etc. complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer -in -Charge. |
| 3 | Supplying, filling, spreading & leveling stone boulders /stone soling hand packedof size range 50mm to 200mm,(Fifty mm to Two hundred mm) under floor/path as soling etc, in the required thickness, for all leads & lifts, all complete including carriage of materials with in all leads, lifts and other incidentals as per direction of Engineer-in-charge. |
| 4 | Providing and laying cement concrete 1 : 4 : 8 (one cement : four sand : eight graded stone aggregate 40 mm (Forty millimetre nominal size) mechanically mixed and vibrated and curing complete excluding cost of form work in foundation and plinth including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in-charge. |
| 5 | Providing and layingcement concrete work1:2:4 (one cement : two sand : four graded crushed stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in-charge. |
| 6 | Providing and laying M- 25 (twenty-five) grade reinfoced cement concrete work mechanically mixed and vibrated with minimum cement contents of 400 Kg. (four hundred Kilogram) per cubic metre with graded crushed stone aggregate 20mm (twenty millimetre) nominal size and curing complete excluding cost of form work and reinforcement for reinforced cement concrete work in:- Foundation, footings bases of columns etc. and mass concrete including carriage of materials with in all leads, lifts and other incidentals . |
| 7 | Providing and laying M- 25 (twenty five) grade reinforced cement concrete work mechanically mixed and vibrated with minimum cement contents of 400 Kg. (four hundredKilogram) per cubic metre with graded crushed stone aggregate 20mm (twenty millimetre) nominal size and curing complete excluding cost of form work and reinforcement for reinforced cement concrete work in:- Columns, pillars, posts and struts square rectangular polygonal in plain upto floor all level including carriage of materials with in all leads, lifts and other incidentals. |
| 8 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor fivelevel,excludingthecostofcentering,shuttering,finishingand reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size) including carriage of materials with in all leads, lifts and other incidentals |
| 9 | Providing Tor steel reinforcement TMT bar Fe 500 ISI make high yield strength for reinforced cement concrete work including bending, binding and placing in position cost of binding wire complete upto floor all level including carriage of materials with in all leads, lifts and other incidentals complete in all respect as per as direction and to the entire satisfaction of Engineer -in -Charge. |
| 10 | Providing form work with steel plates 3.15mm (three point fifteen millimetre) thick welded with angle iron in frame 30x30x5mm (thirty millimetre into thirty millimetre into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies in any height of propping and centering below supporting floor to ceiling upto floor all level and removal of the same for in-situ reinforced concrete and plain concrete work including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in-charge in:- :Foundations, footings, bases of columns, etc. for mass concrete |
| 11 | Providing form work with steel plates 3.15mm (three point fifteen millimetre) thick welded with angle iron in frame 30x30x5mm (thirty millimetre into thirty millimetre into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies in any height of propping and centering below supporting floor to ceiling upto floor all level and removal of the same for in-situ reinforced concrete and plain concrete work including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in-charge in:- Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 12 | Providing form work with steel plates 3.15mm (three point fifteen millimetre) thick welded with angle iron in frame 30x30x5mm (thirty millimetre into thirty millimetre into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies in any height of propping and centering below supporting floor to ceiling upto floor all level and removal of the same for in-situ reinforced concrete and plain concrete work including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in-charge in:- Columns, Pillars, Piers, Abutments, Posts and Struts |
| 13 | Brick work using second class common burnt clay building bricks in super structure above plinth level upto all floor level in cement mortar 1:6 (one cement : six sand) including carriage of materials with in all leads, lifts and other incidentals. |
| 14 | 15mm (Fifteen millimeter) cement plaster in single coat on the rough side of brick/concrete /stone walls for interior & Exterior walls plastering up to all floor level including arises, internal rounded angles, chamfers and /or rounded angles not exceeding 80mm (Eighty millimeter) in girth and finished even and smooth in cement mortar 1:6 (one cement : six sand) upto all floor level including carriage of materials with in all leads, lifts and other incidentals. |
| 15 | Distempering (two coats) with oil bound washable distemper of approved brand and manufacture nerolac/Asian paint and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth upto all floor level including carriage of materials with in all leads, lifts and other incidentals. |
| 16 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.including carriage of materials with in all leads, lifts and other incidentals. |
| 17 | Providing and fixing ball bearing for rolling shutters all complete as per the direction of Engineer -in-Charge.including carriage of materials with in all leads, lifts and other incidentals. |
| 18 | Providing and fixing M.S. grill of required pattern in wooden/steel frames of windows etc. with M.S. flat square or round bars with round headed bolts and nuts or by screws plain grill including carriage of materials with in all leads, lifts and other incidentals. |
| 19 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture including carriage of materials with in all leads, lifts and other incidentals |
| 20 | Steel work welded in built up sections, trusses and framed workincluding cutting, hoisting,fixing in position and applying a priming coat of red lead paint in beams,joists, channels, angles, tees,flats with connection plates or angle cleats as in main and cross beams, hip and jack rafters purlinsconnected to common rafters and the like including carriage of materials with in all leads, lifts and other incidentals. |
| 21 | Supplying & fixing at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm(Ten centimeter)length and drilling holes upto 10 mm dia(Ten mm dia.). etc. complete.including carriage of materials with in all leads, lifts and other incidentals. |
| 22 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm (Fifty x Fifty mm )including strengthening with 2 mm (Two mm dia) dia wire or nuts, bolts and washers as required complete including carriage of materials with in all leads, lifts and other incidentals.as per the direction of Engineer-in-charge. |
| 23 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gm/ m² including carriage of materials with in all leads, lifts and other incidentals |
| 24 | Providing and fixing 0.60mm (Zero point sixty millimetre) thick preprinted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyester (RNP) organic coating of 20 (Twenty) microns over 5 (five) microns primer coating to back coat of polyester of 5 (five) microns over 5 (five) microns primer coating including fixing with screws preprinted iron J or L hooks, bolts and nuts 6mm (Six millimetre) dia metre with preprinted limpet and rubber washers complete with all accessories as required as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals. |
| 25 | Providing and fixing ridges or hips 60 cm (sixty centimetre) overall with 0.60mm (Zero point sixty millimetre) thick pre-painted steel sheets in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyester organic coating of 20(Twenty)micronsover 5 (five)microns primer coating + back coat of polyester of 5 (five) microns over 5 (five) microns primer coating including fixing withprepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges including carriage of materials with in all leads, lifts and other incidentals. |
| 26 | Providing flat iron brackets 50x3 mm size with necessary bolts, nuts and washers etc. for fixing G.S. sheets gutters with purlins including carriage of materials with in all leads, lifts and other incidentals |
| 27 | Providing and fixing 15 cm (Fifteen centimeter )wide, 45 cm (Forty Five Centimeter) overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete including carriage of materials with in all leads, lifts and other incidentals |
| 28 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm dia |
| 29 | Providingandfixingonwallfaceunplasticised - PVCmouldedfittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including carriage of materials with in all leads, lifts and other incidentals.- Coupler ,110mm dia |
| 30 | Providingandfixingonwallfaceunplasticised - PVCmouldedfittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including carriage of materials with in all leads, lifts and other incidentals. -Bend 87.5 degree,110mm bend |
| 31 | Providingandfixingonwallfaceunplasticised - PVCmouldedfittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including carriage of materials with in all leads, lifts and other incidentals. - Shoe,110mm bend |
| 32 | Providingandplacinginposition 100mmthickfactorymademachine batched & machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways , neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick , 100 mm wide MS sheet duly painted over priming coat , reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks including carriage of materials with in all leads, lifts and other incidentals as per direction of Engineer-in-Charge. |
| 33 | Providing and fixingunplasticised - PVC pipe clips of approved design to unplasticised PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete including carriage of materail with in all leads and lifts and other incidentals. |
| 34 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm (Fifteen centimeter )diameter and weighing not less than 440 grams.(four hundred & Forty Gram) including carriage of materials with in all leads, lifts and other incidentals |
| 35 | Providing and laying 60mm(Sixty mm) thick faciory made cement concrete interlocking paverblockofM-30grade made by block making machine with strong vibratory compaction, ofapproved s;ze, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals |
| 36 | Disposalof moorum/buildingrubbish/malba/simila transport including loading, transporting, unloading to approved municipal dumping ground for lead upto10 km (Ten Kilometer) for alllifts,completeas per directionsofEngineer-in-charge.Note -itemtobe applicableinurbanareashaving directions for restricted hours for movement/ plying of load carrying motorvehicle of 3.5 cum(Three & Half Cum) or more |
| 37 | Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I),including collectingsamples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, mobilisation & demobilisaton to site ,tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre (Ninety to One Hundred & Fifty meter )depth below ground level for all depth ,as per direction of Engineer -In -Charge. all complete including carriage of materials with in all leads, lifts and other incidentals |
| 38 | Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of and labour charges, fittings & accessories etc. all complete, for all depths including carriage of materials with in all leads, lifts and other incidentals as per direction of Engineer –in-charge. |
| 39 | Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths,including carriage of materials with in all leads, lifts and other incidentals as per direction of Engineer-incharge.including carriage of materials with in all leads, lifts and other incidentals |
| 40 | Gravel packing in tube well construction in accordance with IS: 4097, including providing gravel / medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. including carriage of materials with in all leads, lifts and other incidentals |
| 41 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for bore well of: 100 mm dia (Hundred meter dia.) all complete as per direction of Engineer -in -Charge including carriage of materials with in all leads, lifts and other incidentals |
| 42 | Disposalof moorum/buildingrubbish/malba/simila transport including loading, transporting, unloading to approved municipal dumping ground for lead upto10 km (Ten Kilometer) for alllifts,completeas per directionsofEngineer-in-charge.Note -itemtobe applicableinurbanareashaving directions for restricted hours for movement/ plying of load carrying motorvehicle of 3.5 cum(Three & Half Cum) or more |
| 43 | Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I).all complete as per direction of Engineer -in -Charge including carriage of materials with in all leads, lifts and other incidentals |
| 44 | Providing & fixingLowering, installation & testing of KSB make submersible pumping set with 3.0 HP motor (Three Horse power )of standard make such as Kirloskar/KSB/BS confirming the ISI code -8034-1976 with upto date ammendments.The pumpset should be capable of handling the head with (+) 10 % (-) 15 % head range and it should be operationable with 240 volts single phase AC suplly discahrge should be 0.84 litre/sec (Zero point eighty Four litre per second) including carriage of materials with in all leads, lifts and other incidentals |
| 45 | Providing & fixing cable 3x2.5 sq.mm (Three x two & half square mm) from submersible pump to panel board.all complete as per direction of Engineer -in -Charge including carriage of materials with in all leads, lifts and other incidentals |
| 46 | Providing & fixing Panel Board for submersible pump fitted with DOL starter ammeter, voltmeter single phase preventer standard/indo/cop make MCB of off switch push bottom duly wired and made out of 16/18 SWG sheet.all complete as per direction of Engineer -in -Charge including carriage of materials with in all leads, lifts and other incidentals |
| 47 | Providing and fixing lever operated butterfly valve conforming to IS:13095-91 PIN 1.6 including necessary companion flanges, bolts and nuts complete.80mm dia all complete as per direction of Engineer -in -Charge including carriage of materials with in all leads, lifts and other incidentals |
| 48 | Providing and fixing C.I. Wafer type flanged non-return valves with bolts, nuts, washers &companion flanges complete.80mm dia(Eighty mm dia) Mall complete as per direction of Engineer -in -Charge including carriage of materials with in all leads, lifts and other incidentals |
| 49 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall - 32 mm dia(Thirty Two mm) nominal boreall complete as per direction of Engineer -in -Charge including carriage of materials with in all leads, lifts and other incidentals |
| 50 | Excavating holes more than 0.10cum & upto 0.5cumincluding getting out the excavated soil, then returning the soil as required in layers not exceeding 20 cm (Twenty centi metre) in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within a lead of 50 m (fifty meter) and lift upto 1.5 m.(one & half meter) all complete as per direction of Engineer -in -Charge including carriage of materials with in all leads, lifts and other incidentals |
| 51 | Supplying, filling, spreading & leveling stone boulders /stone soling hand packedof size range 50mm to 200mm (Fifty to two hundreed mm), under floor/path as soling etc, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals |
| 52 | Providing andlaying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4(1 Cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size.all complete as per direction of Engineer -in -Charge including carriage of materials with in all leads, lifts and other incidentals |
| 53 | Centering and shuttering including strutting, propping etc. and removal of form for all heights :Foundations, footings, bases of columns, etc. for mass concrete all complete as per direction of Engineer -in -Charge including carriage of materials with in all leads, lifts and other incidentals |
| 54 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as per direction of Engineer -in -Charge including carriage of materials with in all leads, lifts and other incidentals |
| 55 | Providing and fixing 0.60mm (Zero point sixty millimetre) thick preprinted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyester (RNP) organic coating of 20 (Twenty) microns over 5 (five) microns primer coating to back coat of polyester of 5 (five) microns over 5 (five) microns primer coating including fixing with screws preprinted iron J or L hooks, bolts and nuts 6mm (Six millimetre) dia metre with preprinted limpet and rubber washers complete with all accessories as required as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals all complete as per direction of Engineer -in -Charge. |
| 56 | Providing and laying 60mm(Sixty mm) thick faciory made cement concrete interlocking paverblockofM-30grade made by block making machine with strong vibratory compaction, ofapproved s;ze, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
