|
| 1 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster incl. disposal of rubbish to the dumping ground within 50mtr lead |
| 2 | Dismantling of flooring with care including stacking of servceable material and diposal of unserviceable material with in 50 Mtr. Lead forCement concrete flooring. |
| 3 | Pointing on stone slab ceiling with cement mortar 1:3 (1-Cement:3-Sand) : Flush pointing. |
| 4 | Pointing on stone masonary in cement sand mortar 1:3 (1-Cement:3-Sand) : Deep grooved pointing Add extra for colour/ pigment of approved shade added in mortar for all type of pointing with lime/ cement on all type of masonry. |
| 5 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished: 25 mm thick. |
| 6 | Providing & laying vitrified Porcelain dianomite floor tile, skirting, dado, size 600x600, 10 mm thick flooring over 20 mm thick bed mortar 1:4 mix with 2-3 mm thick joint to be filled with cementious grout or polymer based non shrink grout of matching colour as per requirement of site. |
| 7 | Providing & laying vitrified skid free, scratch resistant.Natural Rustic Finish for floor,skirting, Dado, Border tiles size 600mmx600mm, 10 mm thick flooring over 20 mm thick bed mortar 1:4 mix or fixed with chemical materials of approved company make and 2-3 mm thick joint to be filled with cementious grout or polymer based non shrink grout make of metaling colour in all shades including cutting of stone/doors etc. if any, as per requirement at site complete with all respect as approved by Engineer-in-charge. |
| 8 | Add extra for Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, using 5kg. adhesive per sum of tile area, in average 3mmthickness instead of cement mortar. |
| 9 | Cement concrete flooring grade 1:2:4 (1-Cement:2-Coarse sand:4-graded stone aggregate) rounding off edges etc. but excluding the cost of nosing of steps etc. complete IS 2571-1970 : 50 mm thick with 20 mm thick nominal size aggregate. |
| 10 | Labour charges for repair of wooden double leaf door including cutting old damaged wood, panel, chieselling and refixing including screws etc. complete in all respect as per direction of Engineer incharge. Excluding cost of material. |
| 11 | Supplying and fixing wood work in frames of wall paneling, false ceiling partition wall etc. as per approved design and drawing including antitermite treatment. Nigeria teak wood Grade – I. |
| 12 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formaldehye resin, in glue both sides with approved steel fittings complete as per Annexure ‘A’ IS 2202 (Part I & II) 1999/1983. Decorative Teak veener both side 30 mm thick shutter |
| 13 | Providing & fixing anodizing alumium work (Anodizing to be got done from approved Anodizer) for doors, windows, ventilators and partition with extruded built up standard tubular and other sections of approved make confirming to IS : 733 and IS : 1285 anodised transparent 81 dyed to required shade according to IS : 1868 (Minimum anodic coating of grade AC 15), fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gas at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required inlcuding cleat angle Aluminum snap beading for glazing/paneling, C.P. Brass/ Stainless Steel screws, Al. Tower bolt & Al. handle & Al. Aldrop etc. all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and peneling to be paid for separately). For Fixed portion |
| 14 | For shutters of doors, windows & ventilators incl. providing and fixing hinges/ rollers etc. and making provision for fixing of fittings wherever reqd. (lockes shall be paid for separately). |
| 15 | Providing and Fixing 12mm thick prelaminated three layer medium density (exterior grade) particle board Grade-I, Type-II confirming to IS 12823 bonded formaldehyde synthetic resin of approved brand and manufacture in paneling fixed in aluminium doors, windows/ stainless steel screws etc. complete as per architectural drawings and direction of engineer-in-charge. Pre-laminated particle board with decorative lamination on both side. |
| 16 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVS/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge (Cost. of aluminium snap beading shall be paid in basic item.) With glass panes of 5.0mm thickness (weight not less than 13.75 Kg/Sqm) as per IS : 2835 |
| 17 | Providing and Fixing hydraulic door closure ISI marked IS 3564-1995. |
| 18 | Providing and fixing brass lock without handle for aluminium door, or approved quality, make & design as directed by Engineer incharge |
| 19 | Providing and fixing Granite stone slab mirror polished and machine edge cut in Walls, Pillars, Steps, Shelves, Sills, Counters. Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 jointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with pigment to match the shade of the marble slab complete including grinding, rubbing and polishing ofIS 3316-1974 : South (Red / Choclate Colour) Above 3601 Cm2 Slab |
| 20 | Extra for providing edge moulding to 18 mm thick marble stone counters, vantities etc. over item No. 7.1 & 7.2 including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work. |
| 21 | Providing and fixing stone slabs table rubbed, 18-20mm thick in Walls, Steps, Pillars, Counters, Jambs, Shelves, Sills etc. laid on 12 mm (Av.) thick base of CM 1:3 (1-cement:3-coarse sand) jointing with white cement mortar 1:2 (1-White cement:2-marble dust) with pigment to match the shade of the marble slab complete including grinding rubbing and polishing. Rajnagar 2nd quality with light spots and streaks. Size upto 1501 to 3600 Cm2 |
| 22 | P & F G.I. Pipes (Internal work) with G.I. fittings (IS:1239 Mark) & M.S. clamps including cutting and making good the walls and floors : 15 mm dia nominal bore. |
| 23 | P & F CPVC Pipes in SDR 11 (Internal work) with CPVC fittings (IS:15778 Mark)including cutting and making good the walls and floors : (B) Concealed pipe in wall(i) 20mm dia |
| 24 | (ii) 25mm dia |
| 25 | P & F Full-way valve (IS:778 Mark) or wheel valve of approved make :Gun-metal 15 mm nominal bore. |
| 26 | Gun-metal 25 mm nominal bore. |
| 27 | P & F Bib Cock (IS:8931 Mark) Superior quality of approved make : C.P. Brass Long body, 15 mm nominal bore weight not less than 690 gm. |
| 28 | P & F kitchen & Lab Sink of approved make with C.I. brackets duly painted, 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up to floor level complete including cutting and making good the wall & floorIS 771 (Part-II) -1985.Size 24x18x820x16x8 |
| 29 | P&F Grating of approved quality/ make Stainless steel sheet size 125mm dia |
| 30 | P&F waste pipe with all fitting PVC with PVC Nut 32mm |
| 31 | P&F waste coupling with fitting of approved quality/ make : C.P. brass 40mm dia |
| 32 | P&F rigid PVC Pipe (IS:4985 mark) class II(4 Kg. /Cm.) approved quality /makeincluding joining the pipe with solvent cement rubber ring and lubricant 75mm dia |
| 33 | 110mm dia |
| 34 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: Reducer 110x75mm |
| 35 | Bend 87.5 |
| 36 | Plain Tee |
| 37 | Door Tee |
| 38 | Plain floor trap |
| 39 | Raising manhole cover and frames slab to reqd. level incl. dismantling existing slab and making good the damage as reqd. (raising depth of manhole masonry to be paid separately). Rectangular manhole 90x60cm |
| 40 | Construction of manhole in all type of soil inner size 90 X 60 Cm. thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5 10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring,making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C.flooring , 25 Kg. CI cover with frame of 40mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead. Depth upto 0.5mtr |
| 41 | Making connection with existing G.I. pipes lines of all sizes. |
| 42 | Labour charges for making connection of sewer line through manhole. |
| 43 | P & F PVC Storage Tank (IS:12701 marked indicating the BIS license No.) of approved make with cover, 25 mm dia 1 M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc. complete of approved design 1000 litres capacity. |
| 44 | P & F Ball Cock (IS:1703 Mark) with Rod & P.V.C. Ball complete : Brass wt. 400 gm, 15 mm. |
| 45 | Earth, Sand ,line morrum, manure or sludge For 20Km |
| 46 | Random Rubble stone masonary for foundation and plinth in Cement Sand Mortar above 30 Cm. thick wall IS 1597 (Part-I) 1992 in : Cement Sand Mortar 1:6 (1-Cement:6-Sand). |
| 47 | Pointing on stone slab ceiling with cement mortar 1:3 (1-Cement:3-Sand) : Flush pointing. |
| 48 | Providing and laying in position cement concrete including curing compaction etc. of specified grade excluding the cost of centering and shuttering All up to plinth level IS 456-2000: 1:4:8 (1Cement :4 Course Sand :8 Graded stone aggregate 40 mm nominal size (Crusher Broken) |
| 49 | 1:3:6 (1Cement :3 Course Sand :6 Graded stone aggregate 20 mm nominal size |
| 50 | Polished Blue Kota Stone flooring skirting, laid over 20 mm thick base of C.M. 1:4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete : For area of each slab up to 2001 to 5000Sq. Cm : (A) 25 mm thick slab. |
| 51 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding: New work (two or more coats) over and including scrapping and priming coat with cement primer. |
| 52 | Painting with weather coat paint (ISI make paint) two or more coat to give an even shade on new work. |
| 53 | Painting with enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work. |
| 54 | Painting with Aluminium paint of approved brand and manufacture to give an even shade: Two or more coats on new work. |
| 55 | Dismantling roofs with care including stacking of serviceable material and disposal of unserviceable material with in 50 Mtr. lead for : Lime terrace. |
| 56 | Providing and laying in position cement concrete including curing compaction etc. of specified grade excluding the cost of centering and shuttering All up to plinth level IS 456-2000: 1:2:4 (1Cement :2 Course Sand 4 Graded stone aggregate 20 mm nominal size) Add extra for laying concrete in superstructure up to floor three level in item 3.2. ( IS 456-2000) : |
| 57 | Providing and laying 20 to 25 mm size glazed tiles pieces for rooof treatment having colour and shade as approved by the Engineer incharge over 25 mm thick layer of cement mortar mix 1:4 with application of cement slurry including finishing of joints with ordinary cement and curing etc. complete in all respect. Washing with acid. |
| 58 | Providing batta (gola) 75mm x 75mm in cement concrete (1:2:4) including finished with cement mortar 1:3 as per standard design. |
| 59 | Supply and Fixing S.S. Wire basket of approved make for modular kitchen Plain Basket Size- 530x505x150 mm |
| 60 | Cup & Saucer/Partition/Plate BasketSize- 530x505x150 mm |
| 61 | Thali Basket Size- 530x505x200 mm |
| 62 | Perforated Cutlery BasketSize- 530x505x100 mm |
| 63 | Supply and FixingS.S. telescopic drawer channel of 45 Kg load capacity of standard size 46x 12.7 mm of approved make |
| 64 | Supply and Fixing S.S. Soft Close Auto hingeof appd make for cabinet shutters |
| 65 | Supply and Fixing S.S. Handle of appd make and design for wardrobe/cabinet shutters Size 150 mm |
| 66 | Supply and Fixing 18 mm thick bothside laminated waterproof Block Board of ISI mark |
