Military Engineer Services-MES has published Repair To Flooring, Ceiling, Roofing And Certain Other Misc Work In Otm Accn Under Age B / R-I At Ge Jhansi . Submission Date for this Tender is 19-09-2022. Shed Construction Tenders in jhansi Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as specified and directed |
| 2 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and directed. |
| 3 | M&L 25 mm PCC 1:2:4 type B0 12.50 mm Stone Agg for leveling course complete all a specified and directed. |
| 4 | M/L for semi skid ceramic color tiles of size exc 0.18 sqm not exc 0.38 sqm and 7 to 8 mm thick (square / rectangular) as in flooring etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed/ bedding layer in CM (1:6) complete all as specified and as directed. Make :- as approved |
| 5 | M/L for semi skid ceramic color tiles of size exc 0.11 sqm not exc 0.18 sqm and 7 to 8 mm thick (square / rectangular) as in flooring etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed/ bedding layer in CM (1:6) complete all as specified and as directed. Make :- as approved |
| 6 | M&L for ceramic colour tiles in vertical surface of size 450 X 300 x 7 mm thick, jointless type, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with and including 10 mm thick rendering in CM (1:4) for receiving the tiles, complete all as directed. Make :- as approved |
| 7 | M&L 75 mm thick cement concrete type C2 1:3:6 (using 40 mm graded stone agg) as in plinth protection and path laid in panels, not more than 3.0 mtr in length, laid to slope 1:30 incl forming joints 10mm wide and duly filled with mastic bitumen (01 part bitumen mixed with 03 parts of sand) surface, complete all as specified and as directed. Note : The quoted rates are deemed to be inclusive of material against form work and joint fillings. |
| 8 | Dismantling of wall / ceiling boards (fiber, pulp, insulation etc) / insulation boards /slabs/blankets of any thickness including cover fillets ridges etc, complete all as specified and directed. |
| 9 | M&L 4mm th Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws and Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equalflanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fastenerswith and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, duly fixed in ceiling frame work, complete all as specified and directed. Make :- as approved |
| 10 | Dismantling Asbestos Cement Corrugated or Semicorrugate in Roof covering, complete all as specified and directed. |
| 11 | Dismantling timber scantling 40.0 sqcm and over in section in any position as in framed / unframed works such as roof purlins, rafters, fillets, ridges etc as in roof/ ceiling, complete all as specified and directed. |
| 12 | Dismantling of wrought iron or mild steel work of any description, complete all as specified and directed. |
| 13 | S&F of pre-painted 0.50mm thick Gavalume Aluminium Zinc coating GI based corrugated / semi corrugated / trapezoidal steel sheet of any colour having tensile strength 550 MPa and AZ 150 grade as in roof covering/cladding to walls, fixed with self tapping screws, complete all as specified and directed.Make : Jindal / Tata / Everest |
| 14 | S&F pre-painted Galvalume Aluminium Zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength 550 MPa and AZ 150 grade as in ridge of roof covering, fixed with self tapping screws, complete all as specified and directed. Make :- as approved |
| 15 | M&L for 6mm thick asbestos cement, corrugated or semi-corrugated sheetsfixed with L-type orJ-type or cranked hook bolts in roofs, walls etc, complete all as specified and directed. |
| 16 | M&L for 6mm thick asbestos cement, one piece plain angular ridge or two piece adjustable plain wing ridge orrugated or semi-corrugated sheetsfixed with L-type orJ-type or cranked hook bolts in roofs, walls etc, complete all as specified and directed. |
| 17 | M&L for structural steel Fe-410-W(Gde-E-250) quality B for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, complete all as specified and directed. |
| 18 | S&F of 40x 5 mm thick mild steel flat iron as in wind tie for roof including securing bolts confirming to Fe 410-W (Gde-E-250) quality-A, complete all as specified and directed. |
| 19 | M&L for preparation of newly steel or iron surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed |
| 20 | M&L for preparing old painted steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 21 | M&L for preparing old or previously treated surfaces of wood or wood based materials of any description not otherwise describedover 10 cm width or girth and applying one coat of synthetic enamel paint to match the existing surfaces, complete all as specified and directed. |
| 22 | Removing existing water proofing treatment by brushing with wire brush, cleaning of terracing by taking down cement concrete, existing plaster lime cova 80 to 100mm thick mud phuska/cement concrete/lime cova etc, cleaning of all foreign material such as fungus mass dust etc, roughing surface of corner to roof by wire brush complete all as specified and directed. |
| 23 | M&L for 10 mm thick rendering in CM (1:4) mixed with water proofing compound @ 0.20 Ltr/bags on roof surface when concrete is green, complete all as specified and directed (Note:- WPC shall be measured and paid separately) |
| 24 | Supply only integral liquid water proofing compound, mixed in CM as per manufacturer instruction, complete all as directed. Make : Make :- as approved |
| 25 | M&L water proofing treatment to roof slab with APP based modified polymeric membrane centre core 100 microne HMHDPE outer flim 20 micron each having thickness 3 mm weight not less than 3kg/Sqm with 100mm overlap laid as per manuacturer"s instructions complete all as specified and as directed by Engineer-in-Charge with following course of description below:- |
| 26 | (a) 1st coat applying bitumen primer confirming to IS-3384-1965 @ 0.40 Kg/Sqm to be applied on prepared roof surface till the surface is properly impregnated |
| 27 | (b) 2nd coat of bonding material using blown type bitumen conforming to IS-702 of grade 85/25 @ 1.20 Kg/Sqm |
| 28 | (c) 3rd course of laying of APP Based modifiedpolymericmembrane with 100mm overlap in longitudinal direction and 150mm in transverse direction and edges to be taken up to vertical wall of 20cm height inserted into the vertical wall concealed the joints with bitumen sealed. All joints and changes in all direction should be covered covered with cement mortar (1:3) mixed with SBR latex @ 200ml per bag of cement and cured well before laying the membrane. |
| 29 | (d) Fourth course of apply a coat of bituminous aluminium paint @0.20 kg/sqm over APP membrane. |
| 30 | M&L for cutting grooves in brick wall, 75mm wide and 65 mm deep and shapping horizontal face of groove with cement mortar (1:3) complete all as specified and directed. |
| 31 | Demolition of brick work built in cement mortar or lime mortar including all quoins arches, pillars etc complete all as specified and directed. |
| 32 | M&L for brick work with fly ash lime bricks (FALB) conforming to IS 12894, old size brick, straight or curved on planexc 6m mean radius built in cm (1:6), complete all as specified and directed. |
| 33 | M&L for half brick thick wall with fly ash lime bricks (FALB) conforming to IS 12894, old size brick, straight or curved on plan exc. 6 M mean radius built in cement mortar 1:4, complete all as specified and directed. |
| 34 | Taking down cement plaster on brick or stone wall including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 35 | M&L for 15 mm thick rendering in CM (1:4)on fair/other than fairfaces of brick work finished even and fair complete all as specified and directed. |
| 36 | M&L for 15 mm thick rendering in CM (1:6)on fair/other than fairfaces of brick work finished even and fair complete all as specified and directed. |
| 37 | M&L for rendering 10mm thick on fair faces of concrete surfaces in ceilings in cement mortar 1:4, finished even and smooth without using extra cement complete all as directed. |
| 38 | M&L for preparation of new plastered surface and applying two coat of cement based paint over and incl one coat of exterior grade cement based primer, complete all as specified and directed. |
| 39 | M&L for preparation of new plastered surface and applying two coats of oil bound distemper, over and incl a layer of wall care putty to get even and smooth level finish on new plastered surface of internal wall, complete all as specified and as directed. |
| 40 | M&L for preparation of new plastered surface and applying three coats of white wash (lime) on new plastered surface of ceiling, complete all as specified and as directed. |
| 41 | M&L for preparation of old plastered surface and applying two coat of cement based paint , complete all as specified and directed. |
| 42 | M&L for preparation of old plastered surface and applying one coats of oil bound distemper, over and incl a layer of wall care putty to get even and smooth level finish on new plastered surface of internal wall, complete all as specified and as directed. |
| 43 | M&L for preparation of surface by washing, rubbingdown and stopping ofpainted surfaces of walls and applying one coat of white wash (lime) on walls surface, complete all as specified and directed. |
| 44 | M&L for preparation of surface by washing, rubbingdown and stopping of distempered and painted surfaces of ceiling and applying one coat of white wash (lime) on walls surface, complete all as specified and directed. |
| 45 | Dismantlingexisting watertanks, (or lowering if required) of exc. 250 litres & not exc. 500 litres capacity of tanks, complete all as specified and directed. |
| 46 | Dismantlingexisting watertanks, (or lowering if required) of exc. 500 litres & not exc. 1000 litres capacity of tanks, complete all as specified and directed. |
| 47 | S&F of rotational moulded polyethylene cylindrical vertical with closed top water storage tank double layered WHITE COLOUR 500 Ltr capacity with connecting nipple, hoisted and fixed in position on new or existing foundation and making GI tubing inlet or outlet connection, with and incl disconnecting and dismantling the existing un-serviceable PVC/RCC water tank on top of roof/slab of bldgs, complete all as specified and directed.Make : Make :- as approved |
| 48 | S&F of rotational moulded polyethylene cylindrical vertical with closed top water storage tank double layered WHITE COLOUR 1000 Ltr capacity with connecting nipple, hoisted and fixed in position on new or existing foundation and making GI tubing inlet or outlet connection, with and incl disconnecting and dismantling the existing un-serviceable PVC/RCC water tank on top of roof/slab of bldgs, complete all as specified and directed.Make : Make :- as approved |
| 49 | S&F in replacement of 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed. |
| 50 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as directed. |
| 51 | S&F of 3 mm thick sheet figured glass pin headed type, not exc 0.50 sqm in each pane, duly fixed with oil putty or wooden bidding as required, complete all as directed. |
| 52 | S&F of 3 mm thick sheet glass ordinary quality and glazing type, not exc 0.50 sqm in each pane, duly fixed with oil putty or wooden bidding as required, complete all as directed. |
| 53 | S&F in replacement of stainless steel wire cloth 0.36 mm in nominal dia of wire average width of aperture 1.40 mm and fixed with tinned tacks of stainless steel wire staples to steel shutters or fixed with wooden beads to wooden joinery, complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
