Provision Of Certain Sanctioned Works Under Ge West Bareilly- 1 M & L For Non- Skid Ceremic Colouredtiles7 To 8 Mm Thick ( Square / Rectangular ) Areaof Each Tile Exceeding0.06 Sqm But Not Exceeding 0.11 Sqm In Floors Etc Set And Jointedin Neat Cementsl, bareilly-Uttar Pradesh

Provision Of Certain Sanctioned Works Under Ge West Bareilly- 1 M & L For Non- Skid Ceremic Colouredtiles7 To 8 Mm Thick ( Square / Rectangular ) Areaof Each Tile Exceeding0.06 Sqm But Not Exceeding 0.11 Sqm In Floors Etc Set And Jointedin Neat Cementslurry And Pointed In Whiteor Colouredcement To Match Incl Dismantling Of Tiles And Demolition Of Concrete Base N. Exc 40Mm Thick And M&L For Screed Bed Or Bedding Layer Of Mortar 20Mm Thick In Cement Mortar 1:4 For Laying Floor Finishesall As Specified And Directed. 2 M & Lfor Colour Glazed Ceremic Colouredtiles Invertical Surface 300 X 600 X7 Mmthick Set And Jointed In Neat Cement Slurry And Pointed In White Or Colour Cement To Match Including 10 Mm Thick Screed Bed Or Bedding Layer Of Cement Mortar 1:4 Cement And Dismantling Of Wall Tile Including Cement Mortar Bedding Complete All As Specified Or As Directed. All As Spfd Or As Directed. 3 Taking Down Chowkats Or Frames With Shutters ( Without Taking Off Shutters From The Frames ) Not Exceeding 1.5 Sqm Each Including Iron Mongries, Hold Fast Etc Andincluding Making Good Disturbed Portions Of Walls In Cm 1:4 Complete All As Specified And Directed. 4 S&F 150Mm Long Mild Steel Sliding Door Bolts, Bolt Or Clip Type, Stove Enamelled Black, With Bright Bolt Not Less Than 12Mm Dia With And Including A Minimum Of 6 Bolts And Nuts, Four On Bolt Plate And Two On Staple Plate And Fixed Complete All As Specified. 5 M&L For 100Mm Long Mild Steel Pressed Handles, Oval Type, Stove Enamelled Black Complete All As Specified And Directed. 6 S&F, 100 Mm Long Aluminium Anodised Barrelbarrel Tower Bolts Of Extruded Section And Fixed As Specified And As Directed. 7 S&F 75 Mm Stainless Steel But Hinges Medium Wtsteel Hinge Pin, Bright Polished And Fixed 8 S&F Framed Work Such As Grills, Gratings, Steel Post And Struts In Fencing Incl Drilling Holes, Notching For Wire Etc, Including Straining Bolts, Holdfasts, Wall Ties, Clamps, Angle Iron Etc With End Bars Shouldered Or Riveted Or Forged Into Spikes, Framed Gaurd Bars, Railing Frame Work And Similar Confirming To Fe-410-O Complete All As Specified And Directed. 9 M&L For Painting To Steel Surfaces Of Any Description Exc 10 Cm Width Or Girth With Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Including Preparation Of New Or Previously Untreated Surfaces All As Specified And Directed. 10 S & F Sheet Glass 3.0 Mm Thick, Ordinary Quality And Glazing With Oil Putty Or Wooden Beads Not Exceeding 0.5 Sqm In Each Pane Glazed With Putty Or Fixed With Beads Complete All As Specified And Directed. 11 S& Fgalvanised Stainless Steel Wire Clothes 0.36 Mm Nominal Dia Of Wire And Average Width Of Aperture1.18 Mm Complete All As Specified And As Directed . 12 M & L For Plain Cement Concrete 1:3:6Type C-1 As In Bed Blocks For Hold Fast And Similar Work Etc Complete All As Specified And Directed. 13 M&L For Precast Cement Concrete 1:2:4, Type B1 ( Using 20 Mm Graded Stone Aggregate ) In Landings, Cover Slabs ( For Manholes Etc. ) Shelves And Similar Articles With Plain Faces And Set In Cement Mortar 1:4 Including Demolition Of Existing Reinforced Cover Complete All As Specified And Directed. 14 Demolition Of Brickwork Built In Cement Mortar Or Cement Lime Mortar Including All Quions, Arches, Pillars Etc But Excluding Ashlar Facings, Dressed Stone Work And Precast Concrete Articles Complete All As Specified And Directed. 15 M&L For Brickwork With Flyash Bricks, Straight Or Curved On Plan Exc 6M Mean Radius Built In 1:4 Cement Mortar Complete All As Specified And Directed. 16 M&L For Rendering 15Mm Thick On Brick Wall Or Concrete Surfaces In Cement Mortar ( 1:4 ) Finished The Surface Even And Smooth Without Using Extra Cement Complete Including Taking Down Cement / New Plaster On Brick Or Stone Walls, Etc. Including Raking Out Joints, Hacking For Key, Scrubbing Down With Water, Etc. All As Specified And Directed. 17 M&L For Rendering 15Mm Thick On Brick Wall Or Concrete Surfaces In Cement Mortar ( 1:6 ) Finished The Surface Even And Smooth Without Using Extra Cement Complete Including Taking Down Cement Mortar Plaster On Brick Or Stone Walls, Etc. Including Raking Out Joints, Hacking For Key, Scrubbing Down With Water, Etc. All As Specified And Directed. 18 M&L For Preparing Newly Plastered Surfaces Of Walls And Applying Two Coat Of Cement Base Paint On Walls All As Specified And Directed. 19 M&L For Preparing Old Plastered Surfaces Of Walls And Applying One Coat Of Cement Base Paint On Walls Including Complete Removing Of Existing Treatement All As Specified And Directed. 20 M&L For Preparing Old Plastered Surfaces Of Walls And Applying One Obdon Walls Including Complete Removing Of Existing Treatement All As Specified And Directed. 21 M&L For Preparing Newly Plastered Surfaces Of Walls And Applying One Obdon Walls All As Specified And Directed. 22 Demolition Stone Slabs And Tiles Of Any Description Or Thickness In Floors Aprons Etc Laid Dry Or Laid Dry And Pointed 23 S&F 20 Mm Thick Granite Stone Slabs Mirror Polished Of Colour And Shade As Approved By Ge, Machine Cut Bedded & Jointed With Grey Cement Slurry And Pointed In White Cement With Admixture Of Pigment To Match The Shade Of Granite Stone Fixed As In Steps, Jambs, Pillars Window Cills, Cooking Platforms & The Like Etc Complete All As Specified And Directed . 24 Rounding To Edges Of Stone Slabs One Edge , Such As In Steps , Cooking Platform , And Other Similar Situations Complete All As Specified And Directed 25 M&L Forpcc 1:3:6 Type C-2 ( 40 Mm Stone Agg ) As In Plinth Protection 75 Mm Thick Finishing Cement Concrete Even And Smooth Without Using Extra Cement. Including75 Mm Wide And 3 Mm Thick Glass Dividing Strip Inserted In Positionat Every One Meter And Change Of Direction Including Demolition Of Cement Concrete ( Un Reinforced ) In Ground Floor Or Pavings Of Any Description N Exc 15 Cm Thickness ( Below Or Above Ground Level ) 26 Demolition Of Cement Concrete ( Reinforced ) Inroofs , Floors ( Other Than Ground Floors ) Beams, Staircases, Landing, Chajjas And Similar Suspended Work 27 M & L Formwork To Chullah Hoods, Chajjas, Trough And Similar Items Including Edges Finished Rough Surfaces Of Concrete Complete All As Specified. 28 M & L Formwork To Sides And Soffits Of Lintels, Lintel Bend, Beams Etc Finished Rough Surfaces Of Concrete Complete All As Specified. 29 M&L For Mild Steel Bar 6 To 8Mm Dia And Over Tmt Bars, Cut To Length, Bent To Shape, Required Including Cranking Bending Spirally For Hooking Ends Etc And Binding With Ms Wire ( Annealed ) Not Less Thn 0.90Mm Dia All As Specified And Directed. 30 S&F Tmt Bars 10Mm Dia And Over, Cut To Length, Bent To Shape Required, Including Binding With Mild Steel Wire ( Annealed ) Not Less Than 0.9Mm Dia. 31 S&F Deformed Or Twisted Bars 5Mm And Over Upto And Including 10Mm Dia In Stirrups, Spacers And Binders Bent To Shape Required, Including Binding With Mild Steel Wire ( Annealed ) Not Less Than .9Mm Dia. 32 M&L Rcc 1:2:4 Type B1 Using 20 Mm Graded Aggregate As In Chajjas And Like All As Specified And Directed. 33 M&L Rcc 1:2:4 Type B1 Using 20 Mm Graded Aggregate As In Slab, Shelves And Stair Case Etc.All As Specified And Directed. 34 S&Fin Repair Vitreous China Squatting Pan Orissa Pattern Size 580Mmx440mm White With Integral Foot Rests Excluding 10Ltrs Capacity Pvc Flushing Cistern Low Levl With Inlet, Ball Valve Float Chain And Pull And Brackets, Flush Pipe Of Polyethylene Of Low Level. 35 S&F In Repairs10 Ltrs Pvc Valveless Syphonic Action Typeflushing Cistern Low Level White , With Inlet Ball Valve, Float And Handle Including Bracketwith 32 Mm Dia Pvc Pipe 600 Mm Long Complete All As Specified And As Directed. 36 Cutting Chases For Gi Consealed Water Tubing And Making Good With Cement Sand Mortar 1:3 Cutting N Exc 10Cm Girth 37 S&F In Repair Bib Taps 15Mm Bore Cp Fency Long Body Bib Taps, Cast Copper Alloy With Crutch Or Butterfly Handle, Screwed Down, Screwed For Iron Pipe Or For Brass Ferrule And Fixed And Fixed All As Specified 38 S&Fin Repair 15Mmbore Fency Type Cp Brass Stopvalves, Cast Copper Alloy, Screwed Down, High Pressure, With Crutch Orbutterfly Handle, Screwed Both Ends For Iron Pipe Or For Unions And Fixeds 39 S&Fin Repair 15Mmbore Fency Type Cp Brass Anglevalves, Cast Copper Alloy, Screwed Down, High Pressure, With Crutch Orbutterfly Handle, Screwed Both Ends For Iron Pipe Or For Unions And Fixeds 40 S&Fin Repair 15 / 20Mmbore Fency Type Cp Brass Concealed Stopvalves, Cast Copper Alloy, Screwed Down, High Pressure, With Crutch Orbutterfly Handle, Screwed Both Ends For Iron Pipe Or For Unions And Fixeds 41 S&F In Repairs Vitreous Chinaware Coloured Wash Hand Basin With Pedestalofsize 55X45x82cm Complete Including Fancy Cp Pillar Tap, Cp Waste Coupling , Waste Pipe , Complete Fixing Arrangementand Cutting For And Pinningin Walls & Making Good Complete All As Specifed And Directed By Eng In Charge.Model : Whb - Cat No 10072, Pedestal- Cat No. Ped 11029 Neptune Of Hindware , Parryware Cat No C0480 ( Sp ) 181 / Cth , C 0375 Pedestral, Cera Cat No 2090107Ped , Cat No S 2040112 Whb 42 S&F For 5.5Mm Thick Looking Mirror Of Selected Quality, Beveled Edge 450Mmx600mm Glass Mounted On 6Mm Thick Ac Building Board And Fixed To Wooden Plug With Chromium Plated Brass Screw And Cup Washer Fixed In Repair Including 5.5Mm Thick Glass Self Of 12Cm Wide With Guard Railing Of 600Mm Long Complete All As Spd. Make Of Mirror: Atul / Golden Fish / Modiguard. 43 S&F Pvc Connection 15Mm Bore Length Not Less Than 450 / 600 Mm Long With Both Ends Ptmt Nuts Complete All As Specified. 44 S&F 32Mm Bore Low Density Polyethylene ( Ldpe ) ( Corrugated Waste Pipe ) Pipes Of Pressure Rating 6 Kgf / Sq. Cm 45 S&F20 Mm Dia Gun Metal , Globe Or Gate Valves , With Iron Wheel Head , Screwed Both Ends For Iron Pipe 46 M&L Taking Up Or Down Existing Steel Tubing And Connections Including Cleaning For Refixing Or Removal To Stores Complete All As Specified And Directed For 15Mm Bore 47 M&L Taking Up Or Down Existing Steel Tubing And Connections Including Cleaning For Refixing Or Removal To Stores Complete All As Specified And Directed For 20Mm Bore 48 S&F 15Mm Bore Gi Water Tubing Medium Grade Galvanised With All Fittings And Fixed Complete To Walls And Ceilling Or Laid In Floor. 49 S&F 20Mm Bore Gi Water Tubing Medium Grade Galvanised With All Fittings And Fixed Complete To Walls And Ceilling Or Laid In Floor. 50 Refixing 15Mm Bore Old Steel Water Tubing And Connection In New Or Old Position ( Walls, Ceilling, Floor Etc ) 51 Refixing 20Mm Bore Old Steel Water Tubing And Connection In New Or Old Position ( Walls, Ceilling, Floor Etc ) 52 S&F 75 Mm Bore Pvc ( Swr ) Pipes Ofsingle Socketed In Any Length With Rubber Ring Joints Laid In Trenches Or In Floors All As Specified. 53 S&F75 Mm Bore. Pvc ( Swr ) Junction Single ( Single T ) Equal Or Unequal With Access Door. 54 S&F 75 Mm Bore Pvc ( Swr ) Pipes Ofsingle Socketed In Any Length With Rubber Ring Joints Fixed To Wall All As Specified. 55 S&F 75 Mm Bore. Pvc ( Swr ) Bends 56 S&F 75 Mm Dia Pvc ( Swr ) Bends Any Radiuswith Access Door 57 S&F 75 Mm Dia Pvc ( Swr ) Floor Trap Plain With Greting Incl Jointing With Solvent Cement 58 S&F 110Mm Dia Pvc ( Swr ) Pipes Single Socketed In Any Length With Rubber Ring Joints Laid In Trenches / Floor. 59 S&F 110Mm Bore Pvc ( Swr ) Bends With Oval Access Door All As Specified 60 S&F 110 Mm Pvc ( Swr ) Bend Any Radius 61 S&F 110Mm Bore.Pvc ( Swr ) Junction Single ( Single T ) Equal Or Unequal With Access Door 62 S&Fin Repair Grating Doom 100 Mm Dia Of Ptmt ( Min Wt 25 Gms ) 63 S&F Towel Rail Cast Copper Alloy, Chromium Plated 600Mm Long With Bracketin Repair. 64 S&F In Repair110 Mm Dia Pvc ( Swr ) Vent Cowl. 65 S&F 110 Mm Pvc ( Swr ) Bend Any Radius 66 S&F 80 Mm Dia Stack Clamps Out Of 50Mmx5mm Flat Iron And 16Mm Dia Round Iron Stays Including Bolts And Nuts And Securing Ends Of Stays To Ball Or Roof 67 Removing Excavated Materialn Exc 50Mand Depoting Where Directed At A Level N Exc 1.5M Above The Starting Point. 68 Demolition Of Cement Concrete As In Ground Floor & Paving N.Exc 15Cm Thick ( Below Or Above Ground Level ) Complete All As Specified And Directed. 69 M&L For 75Mm Thickpcc 1:4:8 Type D-2 ( 40 Mm Stone Agg ) As In Sub Base Finishing Cement Concrete Even Amd Smooth Without Ung Extra Cement. 70 M&L60 Mm Thickness Machine Pressed Precast Interlocking Paver Block Anyshape And Size Conforming To Is - 15658-2006 Ofm-40 Grade With Grey Cement Andpigment. 71 M&L For Sand For Plastering Or Pointing Or Laid For Paver 72 S & F For 500 Ltr Capacity Rotational Moulded Polyethylene Water Storage Tanks ( Cylindrical Vertical With Closed Top ) Hoisted And Fixed In Position All As Specified In Ssr Part I And Dismantling Water Tanks And With Float Valve And Tank Nipple And Complete All As Specified Removing To Store. 73 Material & Labour For Solid Pvc Door Frame Of Size 50Mm X 47Mm Made Out Of 5Mm Plain Colour Pvc Sheet Reinforced With Ms Square Tube Supplying & Fixing In Opening As Per Specification & Drawing. 74 Material & Labour For Factory Made Solid Panel Pvc Wood Grain Printed Door Shutter 30Mm Thick ( Style ) Consisting Of Frame Made Out Of Ms Tubes For Top & Bottom Rails Ms Frame Shall Be Covered With Heat Molded Plain Colour Pvc C Channel Having A Pvc Sheet Strip Of 20Mm Width Stuck Inside With Solvent Cement For Stiles And Plain Colour Pvc Sheets For Top Rail, Lock Rail & Bottom Rail On Either Side &As Gap Insert For Top Rail & Bottom Rail Paneling Of Plain Colour Pvc Sheet To Be Fitted In The Ms Frame Welded / Sealed To The Stiles & Rails With Suitable Pvc Sheet Beading And Jointed Togathers With Solvent Cement Supplying & Fixing The Frame At Site Make : Rajshri / Sintex ( Make Should Be Engraved On Item ) Complete All As Specified & Directed. 75 M&L For Cement Concrete Type E2 1:5:10 ( 40 Mm Graded Aggregate ) As In Mass Concrete 76 Dismantling Of Asbestos Cement Sheet ( Corrugated, Semi Corrugated Etc ) In Roof Covering. 77 M&L For Prepainted Galvatume Aluminium Zinc Coating Gi Based Corrugated Steel Sheet 0.50Mm Thick Of An Color Having Tensile Strength Of 550 Mpa As In Roof Covering / Cladding To Wall, Fixed With Self Tapping Screws As Specified. 78 S & F Prepainted Galvalume Aluminium Zinc Coating Gi Base Plain Steel Sheet 0.50 Mm Thick Of Any Colour Having Tensile Strength Of 550 Mpa As In Roof Covering / Clading To Wall, Fixed With Self Tapping Screws / L-Type Or J-Type Or Cranked Hook Bolts Dismantling Of Ac Sheet Etc As Complete All As Specified And Directed. 79 Vitreous China Urinal Size 420X395x635mm White ( Exculding Flushing Cistern Flush Pipe And Waste Pipe. 80 Excavation In Trenches Not Exceeding 1.5 M Wide And Not Exceeding 1.5 M In Depth, Getting Out In Soft / Loose Soil Etc., In Luding Trimming Bottom And Sides Of Trenches, Leveling / Grading And Ramming Bottom Of Excavation Complete All As Specified And Directed 81 M& L For Cement Concrete ( 1:4:8 ) D2 ( 40 Mm Graded Aggrigate ) In Foundation, Filling And Mass Conrete 82 M & Lfor40 Mm Thick Cement Concrete ( 1:2:4 ) Type B2 ( Using 20 Mm Stone Aggregate ) Finishing With Using Extra Cement As Specified And Directed. 83 M&L Forpre Cast Reinforced Cement Concrete 1:1.5:3 Type A-1 ( Using 20Mm Graded Stone Aggregate ) ( Nominal Mix ) As In Slabs Supported On Wall, Landing, Balconies, Shelves And Like Including Bonding Agent , Complete All As Specified ( Reinforcement To Be Measured & Paid Under Respective Items ) . 84 Returning, Filing In, Including Spreading, Levelling, Watering And Well Ramming In Layers Not Exceeding 25 Cm Thick In Soft / Loose Soil, Complete All As Specified And Directed. 85 Surface Excavation N.Exc 30 Cm Deep And Avg 15Cm Deep And Getting Out Soft And Loose Soil 86 Pcc ( 1:2:4 ) Type B-1 ( Using 20 Mm Graded Aggregates ) , As In Flooring 25 Mm Thick. Complete All As Specified. 87 M&L Hardcorebroken Stone Or Bolder Of Gauges Exc 63Mm But N Exc 100Mm Deposited Spread And Levelled Oin Laoyers N Exc15cm Thick Wat Ered And Rolled / Rammed To A True Surface Complete All As Specified. 88 M&L Preparing New Plaster Surface Of Wall And Applying Twocoat Of Colour Wash Over A Coat Of Coat Of White Wash 89 M& L Framed Work As In Doors Or Gates Of Angle Or Other Section With Gusset Plates, Rails, Braces, Etc., Complete, Drilled For Fixing Of Steel Sheeting Or Other Covering. Doors, Etc. To Be Prepared For Hanging Or Sliding With And Including Either Hooks And Hinges Or Steel Hanging Door Fittings ( Inclusive Of Steel Sheeting Or Other Covering, Running Rails And Guides ) And Hanging; Also Fastening Andfixing Complete 90 Mild Steel, Plain, Black Sheet 1.60 Mm Thick In Wall Cladding, Steel Gates And Similar Work, Cut To Size, Holes Punched; Including Round Headed Screws, Clout Nails Or Rivets And Fixed To Wood Or Steel Framing With Plain 40 Mm Lap Joints With Riveted Or Welded Seams, Including Bending Or Turning Up, Mitred Angles, Etc. As Required. 91 Formwork To Faces Of Walls, Retaining Walls, Abutments, Parapets And Staircase Railings And Similar Work Including Attached Pillasters, Buttresses, Etc. Vertical Or To Batter 92 Excavation In Post Holes ( Or Similar Holes ) In Any Type Of Soil, Each Not Exc 0.5 Cum, Getting Out, Returing Filling And Ramming Carts Not Exc 25 Cm, Watering And Removing Surplus Soil To A Distance Not Exc 50 Mtr And Making Good Surface Complete. 93 Excavation Over Area In Not Exc 1.5M In Depth, Getting Out In Soft / Loose Soil Etc Incl Trimming Bottemand Sides Of Trenches Leaveling And Grading And Ramming Bottem Of Excavation Incl Removing Of Surplus Soil Complete All As Specified And Directed. 94 M&L Steel Work In Tublar Hollow Rectangular / Square Trusses, Purling Rail Incl Special Shapedwasher Etc Complete Using Erw Or Induction Butt Welded Tubes Confirming To Is 1161-1979 Grade Incl One Cote Of Zinkchromate Primer Before Fabrication Distance Pieces Cleatsetc Gde Fe 410 S Complete All As Specified And Directed. 95 M&L For Hardcore Broken Brick 150 Mm Thick Of Gauge N Exc 63Mm, Deposited, Spread, And Levelled In Layer N Exc 15 Mm Thick Watered And Rammed / Rolled To A True Surface. 96 S&F In Repair Pre-Coated Galvalume Aluminium Zinc Coating Gi Based Semi Correcated Stell Sheet 0.50 Mm Thick Of An Colour Having Tensile Strength Of 550 Mpa As In Roof Covering / Cladding To Wall , Fixed Self Tapping Screws As Specified 97 Supply Only Chain Link Ms Galvanised Fencing Of 3 To 4 Mm Dia Of Chain Link Fencing ( Size Of Pitch50 Mm ) Complete All As Specified And Directed 98 Fixing Only 3 To 4 Mm Dia Of Chain Link Fencing ( Size Of Pitch50 Mm ) Incl Line Wires Rails, Straining Bolt, Etc Incl Provision Of Binding Wire Complete All As Specified And Directed 99 S& F Ms Post Holes And Struts In Fencing ( Any Size Of Angle ) Mm Incl Incl Cutting Tops To Shapes As Directed Incl Drilling Holes For Bolting Of Ms Flat Iron In Horizontal, Vertical & Diagnalfaces Of Each Panel To Be Interwined With Chain Link Fencing And Fixed To Ploses With Ms Nutboalts Of Exc 5 Cm Nexc 10Cm In Length And 10-15 Mm Dia And Washers Wind Ties For Sign Board Posts And Struts, Ms Flat Over Post With Necessary Holes And Rebating And Similar Work Confirming To Fe 290 Gde E165, One Coat Red Oxide Before Fixing Complete All As Specified And Directed 100 Brick Work With Subclass Fly Ash Brickwork In One And Half Brick Thick Honey Comb Walling In Cm 1:4 101 S&F Non Skid Ceramic Tiles 7 To 8 Mm Thick ( Square / Rectangular ) Area Of Each Tile Exceeding 0.11 Sqm But Not Exceeding 0.18 Sqm ( 400X400mm ) , As In Floors Set And Jointed In Neat Cement Slurry And Pointed In Coloured Cement To Match The Coloured Tiles15mm Thick Screed Bed Or Bedding Layer Cm 1:4 For Laying Finishes, Complete All As Specified As Directed By Engr-In- Charge And Approved By Ge. 102 M&L For Glazed Ceramic Digital Coloured Tiles In Vertical Surfaces Of Wall ( 450X300x8mm Thick ) Set And Jointed In Neat Cement Slurry Pointed In Coloured Cement To Matchover 15 Mm Thick Plastering In Cm ( 1:4 ) On Stone Masonry Or Other Than Fair Face Of Brickwork Complete All As Specified. 103 S&F Vitreous China Half Stall Urinal, Complete Including Providing And Fixing Plugs, Bedding Urinal Against Wall In Cement Mortar 1:2, Securing Urinal To Plugs With And Including 60Mm Long Brass Screws, Pointing Around Urinal Back In Cement; Fixing Automatic Flushing Cistern With Brackets, Flush Pipe, Grating And Union For Discharge Pipe 104 Brickbats Filling Of Gauge 80Mm To 150Mm 105 Extra For Forming Fair Finished Drain Or Drain Channel 30 Cm Inner Girth In Cement Concrete Using Extra Cement Including Forms Moulds Mitred Stopped Ends Etc Complete All As Spd. 106 M&L For 200 Mm Bore Reinforced Concrete Pipes Class N P-2, Laid And Jointed Complete With Collars All As Specified And Directed 107 M&L For Concrete Bed For 200Mm In Pcc 1:3:6 Type C-2 ( Using 40 Mm Graded Stone Aggregate ) To Drain Pipes Including Packing Under, Haunching Against The Sides Of Pipes After They Are Laid And Testedcomplete All As Specified And Directed. 108 Taking Down Chowkats Or Frames With Shutters ( Without Taking Off Shutters From The Frames ) Exceeding 1.5 Sqm But Not Exceeding 4.0 Sqm Each Including Iron Mongries, Hold Fast Etc And Including Making Good Disturbed Portions Of Walls In Cm 1:4 Complete All As Specified And Directed. 109 Taking Down Shutter Of Any Description Area Exc. 1 Sqm But N.Exc.2 Sqm Each And Removing From Site Complete All As Specified And Directed. 110 All As Per Above Itemabove But Area N.Exc.1.0 Sqm Each. 111 Material & Labour For Second Class Hard Wood ( Sal ) Plain, Solid, Straight Chawkats And Frames, Wrought, Framed, Rebated On The Solid Rounded Or Chamfered, Put Together With Glue Pinned At Joints All As Specified. 112 Supply & Fix 30Mm Thick Flush Shutter Solid Coreconstruction With Block Board Core And Plywood Face Panels, Commercial Type On Both Sides As Specified. 113 Supply & Fix 35 Mm Thick Flush Shutter Solid Coreconstruction With Block Board Core And Plywood Face Panels, Commercial Type On Both Sides As Specified. 114 Supply & Fix 150Mm Size Aluminium Alloy Handles, Febricated Type Extruded Section, Isi Markedall As Specified. 115 Supply & Fix 150Mm Longaluminium Anodised Barrel Tower Boltsof Extruded Section All As Specified. 116 Supply & Fix 300Mm Long Aluminium Alloy, Sliding Door Bolt Withhasp & Staple ( Bolt Type ) And Fixing Clips Of Sheet Cast Or Extruded Section And Fixing Bolts And Sliding Bolts All As Specified. 117 Supply & Fix 100Mm Size Aluminium Anodised Hasp & Staple Safety Type Andfixing Bolts To Hinge Plate Fixed With Screws All As Specified. 118 Supply & Fix Rubber Beading For Doors Of Required Size All As Specified And Directed. 119 Supply & Fix 0.50Mm Thick Plain, Aluminium Sheeting, Alloy 31000 H4 In Drip And Straight Flashing On Doors All As Specified. 120 Supply & Fix Butt Hinges Stainless Steel 100Mm With Screw Complete All As Specified And Directed. 121 Material & Labour For Mild Steel Work As In Small Articles Flat Iron Of Required Size As In Hold Fasts, Angle Cleats, Clamps, Hooks, Straps And Similar Small Articles Complete All As Specified And Directed. Conforming To The Gde Fe 410-0 Or310-0. 122 Material & Labour For Preparation Of New Wooden Surfaces Of Any Description Not Otherwise Described Over 10 Cm Width Or Girth And Applying Two Coats Of Synthetic Enamel Paint Over One Coat Of Pink Primer On New Wooden Surfaces Complete All As Specified And Directed. 123 Taking Down Cement Or Cement Lime Plaster Any Description From Brick Or Stone Walls / Ceiling Etc Including Raking Out Joints, Hacking For Key & Scrubbing Down With Water All As Specified. 124 M & L For 15-18 Mm Thick Machine Cut Kota Stoneslab Flooring And Jointed With Grey Cement Slurry Fixed With Pigmentto Match To Shade Of The Slab Including Rubbing And Mirror Polishing Over And And Or 20 Mm Thick Bedding Layer Of Cement Mortar 1:6 For Laying Floor Finishes Even And Rough With And Including Dismantling Floor, Hearth Or Wall Kota Stone Slab Including Cement Mortar Bedding ( But Not Backing ) Including Removing The Rubbish Off The Premises Complete All As Specified And Directed. 125 M&L For Sand Cushioning Laid In Trenches For Laying Of Lt Ug Cables Complete All As Spd And Directed. ( Punned Thicknessof Cable Shall Be Measured ) 126 M&L Common Burnt Clay Building Bricks, Sub-Class ‘B’ Designation-75 For Lt Ug Cable Protectioncomplete 127 Supply And Laying & Testing Ug Cable Xlpe Insulated, Screened, Pvc Bedded, Galvanized Steel Strip Or Wire Armoured, Electric Power Cables ( Heavy Duty ) 1100 Volts Grade With Stranded Aluminium Conductor Of Size 10 Sq Mm, 4 Core. 128 S & F In Replacementgi Pipe Light Grade 40 Mm Bore For Cable Protection, Fixed To Pole / Alongwall / Floor / Under Road / Across The Drain Or Nallaha Etc Of Following Sizes Complete All As Specified & Directed. 129 Supply And Fixing Led Street Light Fitting 35 Watt 230 V Ac Outdoor Type With High Pressure Die Cast Aluminum Hosing And Heat Resistant Complete With Driver, Lamp Bracket With Impact And Corrosion Resistant Incl Ding Thermal Anagement In Multiple Optics Complete With Ip 65 / 66 Protection Complete Of 120 Watt . Bracket Made Out With Gi Pipe Medium Grade Not Less Than 1.2 Mtr Long And Bent To Shape Incl 02 Nos Ms Clamps Of Size 50X6 Mm With Nut Bolt Washer Complete With Connction Of Street Light From Pole Box To Fittings With 1.5 Sq Mm3 Core Copper Conductor Complete All As Spd And Directed . 130 Supply And Erection, In Truly Vertical Position, Lt Steel Tublar Swaged Pole Complete With Cast Iron Base Plate Finial Taper Plug, Bolt , Nut And Screwed Type 410 Sp -22 ( 8.5 Mtr Long ) Including Painting Of Poles With Two Coats Of Synthatic Enamel Paint In Black And White Strips Upto 1.5 Mtr Height From Coping Over A Coat Of Red Oxide Primer Including Numbering Of Poles As Directed By Engineer In Charge.Note : Pcc, Earth Work And Ms Work As Cross Arms Clamps Etc Will Be Measured And Paid Separately In Respective Items . 131 S&F In Repair Loop-In-Loop Out Box Of Size 30X20x20cm Made Out From 1.6Mm Thick Pvc Sheet Weather Proof, Dust And Vermin Proof With Hinged Door And Locking Arrangements With Slanting Cover On Top And Provision Of 04 Nos Aluminium Bus Bar Of Size 25Mm X 2Mm-4 Nos Fixed On Insulator And One Mcb Of Capacity 6 Amps Complete Fixed On Pole With And Including Suitable Size Ms Flat Iron Clamps, Nuts, Bolts & Washers Etc Complete All As Specified And Directed. 132 M&L For Pcc ( 1:3:6 ) Type B1 Using ( 20 Mm Graded Aggregatefor Pole Copingcomplete All As Specified And Directed. 133 Earthing Complete With Galvanised Steel Earth Plate Electrode 60×60Cm.× 6Mm Thick, Buried Directly In Ground ( Earth Pit Not Less Than 2.25 Metres Deep Below Ground Level ) With Top Edge Of The Plate Not LessThan 1.5 Metres Below Normal Ground Level, Connected To Galvanised Earth Lead Wire 4.0Mm Dia By Means Of Bolts, Nuts, Check Nuts And Washers Of Galvanised Iron Or Steel All As Shown In Electrical Plate No. 3 Connected To Earthing Test Point All As Specified Or Indicated Including Testing On Completion Complete All As Specified And Directed. 134 Supply And Fix Exhaust Fanmetal Body Ac Single Phase 230 / 240V Of Size 300 Sweep With Louver Complete All Specified And Directed.Note:- Cost Of Louver And Its Fixing Included In Quoted Rate. 135 M&L For Concealed Typewiring For One Light / Fan / Exhaust Fan / Bell Point Controlled By One Switch With1.5 Sqmm ( Nominal Area ) Pvc Insulated, Unsheathed, Stranded Copper, Conductor Cable ( 1100Volts Grade ) Frls, Isi Marked, Drawn In And Includingrigid Pvc Conduits , 20 / 25Mm Dia All As Directedwithall Fittings And Accessories Alongwith Pvc Insulated Cable With Solid Copper Conductor Of Size 1.5 Sqmm As Earth Continuity Conductor Including Fixing Of2mm Thick Ms Sunk Terminal Boxdulyflushed To Wall With 3Mm Thick Plastic Laminated Sheet Cover Fixed With Brass Screws, Cap And Washers Incl. Making Good The Disturbed Surfaces And Matching With Existing Colour Complete All As Below:- 136 ( A ) One Light / Fan / Exhaust Fan Point Controlled By One Switchcomplete All As Specified And Directed. 137 M & L For Hole Cutting In Wall For Fixing Of Exhaust Fan Of Size 300 Mm And Good The Disturbed Surfacres Of Wallby Using Putty And Match With Existing Colour Of Wall Complete All As Specified And Directed.Note:-Cost Of Repairing Work And Material ( Cement And Sand ) Included In Quoted Rate. 138 Supply And Fix Switch Piano , Flush Type Single Pole , One Way5 Amp Complete All As Specified And Directed. 139 Notes :-

Sr No	CorrigendumDate	Corrignedum	CorrigendumType	NewSubmissionDate
1	08-Sep-2022	Amendment in BOQ	BOQ	16-09-2022
2	16-Sep-2022	Bid Auto Extn Corrigendum	Bid Auto Extn Corrigendum	23-09-2022

INR 500 /-

INR 99600.0 /-

INR 49.80 Lakhs /-

Name of Work: PROVN OF CERTAIN SANCTIONED WORKS UNDER GE WEST BAREILLY.

Sl. No.	Item Description
1	M & L for non- skid ceremic colouredtiles7 to 8 mm thick(Square/rectangular) areaof each tile exceeding0.06 Sqm but not exceeding 0.11 Sqm in floors etc set and jointedin neat cementslurry and pointed in whiteor colouredcement to match incl dismantling of tiles and demolition of concrete base n. exc 40mm thick and M&L for screed bed or bedding layer of mortar 20mm thick in cement mortar 1:4 for laying floor finishesall as specified and directed.
2	M & Lfor colour glazed ceremic colouredtiles invertical surface 300 x 600 x7 mmthick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick screed bed or bedding layer of cement mortar 1:4 cement and dismantling of wall tile including cement mortar bedding complete all as specified or as directed. all as spfd or as directed.
3	Taking down Chowkats or frames with shutters (Without taking off shutters from the frames)not exceeding 1.5 Sqm each including iron mongries, hold fast etc andincluding making good disturbed portions of walls in CM 1:4 complete all as specified and directed.
4	S&F 150mm long mild steel sliding door bolts, bolt or clip type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified.
5	M&L for 100mm long mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed.
6	S&F, 100 mm long aluminium anodised barrelbarrel tower bolts of extruded section and fixed as specified and as directed.
7	S&F 75 mm stainless steel but hinges medium wtsteel hinge pin, bright polished and fixed
8	S&F framed work such as grills, gratings, steel post and struts in fencing incl drilling holes, notching for wire etc, including straining bolts, holdfasts, wall ties, clamps, angle iron etc with end bars shouldered or riveted or forged into spikes, framed gaurd bars, railing frame work and similar confirming to Fe-410-O complete all as specified and directed.
9	M&L for painting to steel surfaces of any description exc 10 cm width or girth with two coats of synthetic enamel paint over a coat of red oxide including preparation of new or previously untreated surfaces all as specified and directed.
10	S & F Sheet glass 3.0 mm thick, ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane glazed with putty or fixed with beads complete all as specified and directed.
11	S& Fgalvanised stainless steel wire clothes 0.36 mm nominal dia of wire and average width of aperture1.18 mm complete all as specified and as directed .
12	M & L for Plain Cement Concrete 1:3:6type C-1 as in bed blocks for hold fast and similar work etc complete all as specified and directed.
13	M&L for Precast cement concrete 1:2:4, type B1 (Using 20 mm graded stone aggregate) in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 including demolition of existing reinforced cover complete all as specified and directed.
14	Demolition of brickwork built in cement mortar or cement lime mortar including all quions, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.
15	M&L for brickwork with flyash bricks, straight or curved on plan exc 6m mean radius built in 1:4 cement mortar complete all as specified and directed.
16	M&L for rendering 15mm thick on brick wall or concrete surfaces in cement mortar (1:4) finished the surface even and smooth without using extra cement complete including Taking down cement /new plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. all as specified and directed.
17	M&L for rendering 15mm thick on brick wall or concrete surfaces in cement mortar (1:6) finished the surface even and smooth without using extra cement complete including Taking down cement mortar plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. all as specified and directed.
18	M&L for preparing newly plastered surfaces of walls and applying two coat of cement base paint on walls all as specified and directed.
19	M&L for preparing Old plastered surfaces of walls and applying one coat of cement base paint on walls including complete removing of existing treatement all as specified and directed.
20	M&L for preparing Old plastered surfaces of walls and applying one OBDon walls including complete removing of existing treatement all as specified and directed.
21	M&L for preparing newly plastered surfaces of walls and applying one OBDon walls all as specified and directed.
22	Demolition Stone slabs and tiles of any description or thickness in floors aprons etc laid dry or laid dry and pointed
23	S&F 20 mm thick granite stone slabs mirror polished of colour and shade as approved by GE, machine cut bedded & jointed with grey cement slurry and pointed in white cement with admixture of pigment to match the shade of granite stone fixed as in steps, jambs, pillars window cills, cooking platforms & the like etc complete all as specified and directed .
24	Rounding to edges of stone slabs one edge , such as in steps , cooking platform , and other similar situations complete all as specified and directed
25	M&L forPCC 1:3:6 type C-2 (40 mm stone agg) as in plinth protection 75 mm thick finishing cement concrete even and smooth without using extra cement. Including75 mm wide and 3 mm thick glass dividing strip inserted in positionat every one meter and change of direction including Demolition of cement concrete (un reinforced) in ground floor or pavings of any description n exc 15 cm thickness (below or above ground level)
26	Demolition of cement concrete ( reinforced) inroofs , floors (other than ground floors) beams, staircases, landing, chajjas and similar suspended work
27	M & L formwork to chullah hoods, chajjas, trough and similar items including edges finished rough surfaces of concrete complete all as specified.
28	M & L formwork to sides and soffits of lintels,lintel bend, beams etc finished rough surfaces of concrete complete all as specified.
29	M&L for mild steel bar 6 to 8mm dia and over TMT bars, cut to length, bent to shape, required including cranking bending spirally for hooking ends etc and binding with MS Wire( annealed) not less thn 0.90mm dia all as specified and directed.
30	S&F TMT bars 10mm dia and over, cut to length, bent to shape required,including binding with mild steel wire (annealed) not less than 0.9mm dia.
31	S&F deformed or twisted bars 5mm and over upto and including 10mm dia in stirrups, spacers and binders bent to shape required,including binding with mild steel wire (annealed) not less than .9mm dia.
32	M&L RCC 1:2:4 type B1 using 20 mm graded aggregate as in chajjas and like all as specified and directed.
33	M&L RCC 1:2:4 type B1 using 20 mm graded aggregate as in slab, shelves and stair case etc.all as specified and directed.
34	S&Fin repair vitreous china squatting pan "Orissa" pattern size 580mmx440mm white with integral foot rests excluding 10ltrs capacity PVC flushing cistern low levl with inlet, ball valve float chain and pull and brackets, flush pipe of polyethylene of low level.
35	S&F in repairs10 ltrs PVC valveless syphonic action typeflushing cistern low level white , with inlet ball valve, float and handle including bracketwith 32 mm dia PVC pipe 600 mm long complete all as specified and as directed.
36	Cutting chases for GI consealed water tubing and making good with cement sand mortar 1:3 cutting n exc 10cm girth
37	S&F in repair bib taps 15mm bore CP fency long body Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed and fixed all as specified
38	S&Fin repair 15mmbore Fency type CP brass Stopvalves, cast copper alloy,screwed down, high pressure,with crutch orbutterfly handle, screwed both ends for iron pipe or for unions and fixeds
39	S&Fin repair 15mmbore Fency type CP brass anglevalves, cast copper alloy,screwed down, high pressure,with crutch orbutterfly handle, screwed both ends for iron pipe or for unions and fixeds
40	S&Fin repair 15/20mmbore Fency type CP brass concealed Stopvalves, cast copper alloy,screwed down, high pressure,with crutch orbutterfly handle, screwed both ends for iron pipe or for unions and fixeds
41	S&F in repairs vitreous chinaware coloured wash hand basin with pedestalofsize 55X45X82cm complete including fancy CP pillar tap, CP Waste coupling ,waste pipe ,complete fixing arrangementand cutting for and pinningin walls & making good complete all as specifed and directed by Eng in charge.Model : WHB - Cat No 10072, Pedestal- Cat No. Ped 11029 Neptune of Hindware ,Parryware Cat No C0480 (SP) 181/CTH ,C 0375 pedestral, Cera Cat No 2090107Ped , Cat No S 2040112 WHB
42	S&F for 5.5mm thick looking mirror of selected quality, beveled edge 450mmx600mm glass mounted on 6mm thick AC building board and fixed to wooden plug with chromium plated brass screw and cup washer fixed in repair including 5.5mm thick glass self of 12cm wide with guard railing of 600mm long complete all as spd. Make of Mirror: Atul/Golden Fish/Modiguard.
43	S&F PVC connection 15mm bore length not less than 450/600 mm long with both ends PTMT nuts complete all as specified.
44	S&F 32mm bore Low density polyethylene (LDPE) (corrugated Waste pipe) pipes of pressure rating 6 kgf/sq. cm
45	S&F20 mm dia gun metal ,globe or gate valves , with iron wheel head , screwed both ends for iron pipe
46	M&L taking up or down existing steel tubing and connections including cleaning for refixing or removal to stores complete all as specified and directed for 15mm bore
47	M&L taking up or down existing steel tubing and connections including cleaning for refixing or removal to stores complete all as specified and directed for 20mm bore
48	S&F 15mm bore GI water tubing medium grade galvanised with all fittings and fixed complete to walls and ceilling or laid in floor.
49	S&F 20mm bore GI water tubing medium grade galvanised with all fittings and fixed complete to walls and ceilling or laid in floor.
50	Refixing 15mm bore old steel water tubing and connection in new or old position (walls, ceilling, floor etc)
51	Refixing 20mm bore old steel water tubing and connection in new or old position (walls, ceilling, floor etc)
52	S&F 75 mm bore PVC (SWR) pipes ofsingle socketed in any length with rubber ring joints laid in trenches or in floors all as specified.
53	S&F75 mm bore. PVC(SWR) junction single (single T) equal or unequal with access door.
54	S&F 75 mm bore PVC (SWR) pipes ofsingle socketed in any length with rubber ring joints fixed to wall all as specified.
55	S&F 75 mm bore. PVC (SWR) bends
56	S&F 75 mm dia PVC (SWR) bends any radiuswith access door
57	S&F 75 mm dia PVC (SWR) floor trap plain with greting incl jointing with solvent cement
58	S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches/floor.
59	S&F 110mm bore PVC (SWR) bends with oval access door all as specified
60	S&F 110 mm PVC (SWR) bend any radius
61	S&F 110mm bore.PVC(SWR) junction single (single T) equal or unequal with access door
62	S&Fin repair grating doom 100 mm dia of PTMT (Min wt 25 gms)
63	S&F towel rail cast copper alloy, chromium plated 600mm long with bracketin repair.
64	S&F in repair110 mm dia PVC (SWR) vent cowl.
65	S&F 110 mm PVC (SWR) bend any radius
66	S&F 80 mm dia stack clamps out of 50mmx5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to ball or roof
67	Removing excavated materialn exc 50mand depoting where directed at a level n exc 1.5m above the starting point.
68	Demolition of cement concrete as in ground floor & paving n.exc 15cm thick (below or above ground level) complete all as specified and directed.
69	M&L for 75mm thickPCC 1:4:8 type D-2 (40 mm stone agg) as in Sub base finishing cement concrete even amd smooth without ung extra cement.
70	M&L60 mm thickness machine pressed precast interlocking paver block anyshape and size conforming to IS - 15658-2006 ofM-40 grade with grey cement andpigment.
71	M&L for Sand for plastering or pointing or laid for paver
72	S & F for 500 ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I and Dismantling water tanks and with float valve and Tank nipple and complete all as specified removing to store.
73	Material & labour for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube supplying & fixing in opening as per specification & drawing.
74	Material & labour for Factory made solid panel PVC wood grain printed door shutter 30mm thick (style)consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat molded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side &as gap insert for top rail & bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed togathers with solvent cement supplying & fixing the frame at site Make : Rajshri/SINTEX (Make should be engraved on item ) complete all as specified & directed.
75	M&L for cement concrete type E2 1:5:10 (40 mm graded aggregate) as in mass concrete
76	Dismantling of asbestos cement sheet (corrugated, semi corrugated etc) in roof covering.
77	M&L for prepainted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an color having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.
78	S & F prepainted galvalume aluminium zinc coating GI base plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / clading to wall, fixed with self tapping screws/L-type or J-type or cranked hook bolts dismantling of AC Sheet etc as complete all as specified and directed.
79	Vitreous China Urinal size 420x395x635mm white (exculding flushing Cistern flush pipe and waste pipe.
80	Excavation in trenches not exceeding 1.5 M wide and not exceeding 1.5 m in depth, getting out in soft/loose soil etc., in luding trimming bottom and sides of trenches, leveling/grading and ramming bottom of excavation complete all as specified and directed
81	M& L for cement concrete (1:4:8 ) D2 (40 mm graded aggrigate) in foundation, filling and mass conrete
82	M & Lfor40 mm thick cement concrete (1:2:4) type B2 (using 20 mm stone aggregate)finishing with using extra cement as specified and directed.
83	M&L forpre cast reinforced cement concrete 1:1.5:3 type A-1 (using 20mm graded stone aggregate) (nominal mix) as in slabs supported on wall,landing, balconies, shelves and like including bonding agent , complete all as specified (reinforcement to be measured & paid under respective items).
84	Returning, filing in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in soft/loose soil, complete all as specified and directed.
85	Surface excavation n.exc 30 cm deep and avg 15cm deep and getting out soft and loose soil
86	PCC (1:2:4) type B-1 (Using 20 mm graded aggregates), as in flooring 25 mm thick. Complete all as specified.
87	M&L Hardcorebroken stone or bolder of gauges exc 63mm but n exc 100mm deposited spread and levelled oin laoyers n exc15cm thick wat ered and rolled/rammed to a true surface complete all as specified.
88	M&L Preparing new plaster surface of wall and applying twocoat of colour wash over a coat of coat of white wash
89	M& L Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (inclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening andfixing complete
90	Mild steel, plain, black sheet 1.60 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required.
91	Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc. vertical or to batter
92	Excavation in post holes (or similar holes) in any type of soil, each not exc 0.5 cum, getting out, returing filling and ramming carts not exc 25 cm, watering and removing surplus soil to a distance not exc 50 mtr and making good surface complete.
93	Excavation over area in not exc 1.5m in depth, getting out in soft/loose soil etc incl trimming bottemand sides of trenches leaveling and grading and ramming bottem of excavation incl removing of surplus soil complete all as specified and directed.
94	M&L Steel work in tublar hollow rectangular/Square trusses, purling rail incl special shapedwasher etc complete using ERW or induction butt welded tubes confirming to IS 1161-1979 grade incl one cote of zinkchromate primer before fabrication distance pieces cleatsetc GDE Fe 410 S complete all as specified and directed.
95	M&L for hardcore broken brick 150 mm thick of gauge n exc 63mm, deposited, spread, and levelled in layer n exc 15 mm thick watered and rammed/rolled to a true surface.
96	S&F in repair pre-coated galvalume aluminium zinc coating GI based semi correcated stell sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering/cladding to wall , fixed self tapping screws as specified
97	Supply only chain link MS galvanised fencing of 3 to 4 mm dia of chain link fencing (size of pitch50 mm ) complete all as specified and directed
98	Fixing only 3 to 4 mm dia of chain link fencing (size of pitch50 mm ) incl line wires rails, straining bolt, etc incl provision of binding wire complete all as specified and directed
99	S& F MS post holes and struts in fencing (any size of angle) mm incl incl cutting tops to shapes as directed incl drilling holes for bolting of MS flat iron in horizontal, vertical & diagnalfaces of each panel to be interwined with chain link fencing and fixed to ploses with MS nutboalts of exc 5 cm nexc 10cm in length and 10-15 mm dia and washers wind ties for sign board posts and struts, MS flat over post with necessary holes and rebating and similar work confirming to Fe 290 Gde E165, one coat red oxide before fixing complete all as specified and directed
100	Brick work with subclass fly ash brickwork in one and half brick thick honey comb walling in CM 1:4
101	S&F Non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm (400x400mm), as in floors set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles15mm thick screed bed or bedding layer CM 1:4 for laying finishes,complete all as specified as directed by Engr-in- Charge and approved by GE.
102	M&L for glazed ceramic digital coloured tiles in vertical surfaces of wall (450x300x8mm thick)set and jointed in neat cement slurry pointed in coloured cement to matchover 15 mm thick plastering in CM (1:4) on stone masonry or other than fair face of brickwork complete all as specified.
103	S&F Vitreous China half stall urinal, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe
104	Brickbats filling of gauge 80mm to 150mm
105	Extra for forming fair finished drain or drain channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitred stopped ends etc complete all as spd.
106	M&L for 200 mm bore reinforced concrete pipes class N P-2, laid and jointed complete with collars all as specified and directed
107	M&L for concrete bed for 200mm in PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) to drain pipes including packing under,haunching against the sides of pipes after they are laid and testedcomplete all as specified and directed.
108	Taking down Chowkats or frames with shutters (Without taking off shutters from the frames)exceeding 1.5 sqm but not exceeding 4.0 Sqm each including iron mongries, hold fast etc and including making good disturbed portions of walls in Cm 1:4 complete all as specified and directed.
109	Taking down shutter of any description area exc. 1 Sqm but n.exc.2 Sqm each and removing from site complete all as specified and directed.
110	All as per above Itemabove but area n.exc.1.0 Sqm each.
111	Material & labour for second class hard wood (Sal) plain, solid, straight chawkats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints all as specified.
112	Supply & fix 30mm thick flush shutter solid coreconstruction with block board core and plywood face panels, commercial type on both sides as specified.
113	Supply & fix 35 mm thick flush shutter solid coreconstruction with block board core and plywood face panels, commercial type on both sides as specified.
114	Supply & fix 150mm size aluminium alloy handles, febricated type extruded section, ISI markedall as specified.
115	Supply & fix 150mm longaluminium anodised barrel tower boltsof extruded section all as specified.
116	Supply & fix 300mm long aluminium alloy, sliding door bolt withhasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts all as specified.
117	Supply & fix 100mm size aluminium anodised hasp & staple safety type andfixing bolts to hinge plate fixed with screws all as specified.
118	Supply & fix rubber beading for doors of required size all as specified and directed.
119	Supply & fix 0.50mm thick plain, aluminium sheeting, alloy 31000 H4 in drip and straight flashing on doors all as specified.
120	Supply & fix butt hinges stainless steel 100mm with screw complete all as specified and directed.
121	Material & labour for mild steel work as in small articles flat iron of required size as in hold fasts, angle cleats, clamps, hooks, straps and similar small articles complete all as specified and directed. conforming to the Gde Fe 410-0 or310-0.
122	Material & labour for preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer on new wooden surfaces complete all as specified and directed.
123	Taking down cement or cement lime plaster any description from brick or stone walls/ceiling etc including raking out joints, hacking for key & scrubbing down with water all as specified.
124	M & L for 15-18 mm thick machine cut kota stoneslab flooring and jointed with grey cement slurry fixed with pigmentto match to shade of the slab including rubbing and mirror polishing over and and or 20 mm thick bedding layer of cement mortar 1:6 for laying floor finishes even and rough with and including dismantling floor, hearth or wall kota stone slab including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.
125	M&L for sand cushioning laid in trenches for laying of LT UG cables complete all as spd and directed. ( punned thicknessof cable shall be measured)
126	M&L common burnt clay building bricks, sub-class ‘B’ designation-75 for LT UG cable protectioncomplete
127	Supply and laying & testing UG cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm, 4 core.
128	S & F in replacementGI pipe light grade 40 mm bore for cable protection, fixed to pole/ alongwall/ floor/ under road/ across the drain or nallaha etc of following sizes complete all as specified & directed.
129	Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant incl ding thermal anagement in multiple optics complete with IP 65/66 protection complete of 120 watt . Bracket made out with GI pipe medium grade not less than 1.2 mtr long and bent to shape incl 02 Nos MS clamps of size 50x6 mm with nut bolt washer complete with connction of street light from pole box to fittings with 1.5 sq mm3 core copper conductor complete all as spd and directed .
130	Supply and erection, in truly vertical position, LT Steel tublar swaged pole complete with cast iron base plate finial taper plug, bolt , nut and screwed type 410 SP -22 (8.5 Mtr long)including painting of poles with two coats of synthatic enamel paint in black and white strips upto 1.5 mtr height from coping over a coat of red oxide primer including numbering of poles as directed by Engineer in charge.Note : PCC, Earth work and MS work as cross arms clamps etc will be measured and paid separately in respective items .
131	S&F in repair loop-in-loop out box of size 30x20x20cm made out from 1.6mm thick PVC sheet weather proof, dust and vermin proof with hinged door and locking arrangements with slanting cover on top and provision of 04 Nos aluminium bus bar of size 25mm x 2mm-4 Nos fixed on insulator and one MCB of capacity 6 Amps complete fixed on pole with and including suitable size MS flat iron clamps, nuts,bolts & washers etc complete all as specified and directed.
132	M&L for PCC (1:3:6) type B1 using (20 mm graded aggregatefor pole copingcomplete all as specified and directed.
133	Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less"than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed.
134	Supply and fix Exhaust FanMetal Body AC single phase 230/240V of size 300 sweep with louver complete all specified and directed. Note:- cost of louver and its fixing included in quoted rate.
135	M&L for concealed typewiring for one light/ fan/exhaust fan/ bell point controlled by one switch with1.5 Sqmm (Nominal area) PVC insulated, unsheathed, stranded copper, conductor cable (1100Volts grade)FRLS,ISI marked, drawn in and includingrigid PVC conduits ,20/25mm dia all as directedwithall fittings and accessories alongwith PVC insulated cable with solid copper conductor of size 1.5 Sqmm as earth continuity conductor including fixing of2mm thick MS sunk terminal boxdulyflushed to wall with 3mm thick plastic laminated sheet cover fixed with brass screws,cap and washers incl. making good the disturbed surfaces and matching with existing colour complete all as below:-
136	(a) One light / fan/ exhaust fan point controlled by one switchcomplete all as specified and directed.
137	M & L for Hole cutting in wall for fixing of exhaust fan of size 300 mm and good the disturbed surfacres of wallby using putty and match with existing colour of wall complete all as specified and directed. Note:-Cost of repairing work and material (cement and sand) included in quoted rate.
138	Supply and fix Switch Piano , flush type single pole ,one way5 Amp complete all as specified and directed.
139	Notes :-