Government Secretariat Execution Government Secretariat Execution Of Civil Works GENERAL-Government SecretariatExecution of civil works in Old Assembly building for WaterResources Department-Government Secretariat-Providing work stationsin Old Assembly b, Thiruvananthapuram-Kerala

Government Secretariat Execution Government Secretariat Execution Of Civil Works GENERAL-Government SecretariatExecution of civil works in Old Assembly building for WaterResources Department-Government Secretariat-Providing work stationsin Old Assembly building for Water Resources Department-General Civil Work Sl. No. Item Description 1 workstation 2 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) 3 21.2.2:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides 4 21.17:Providing and fixing anodised aluminium grill ( anodised transparent or dyed to required shade according to IS : 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.(Only weight of grill to be measured for payment ). 5 21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) 6 21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness 7 21.12.2:Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0mm thick & 2100 mm long with S.S. screws etc. complete as per direction of Engineer -in-Charge.Powder coated minimum thickness 50 micron aluminium tubular handle bar 8 21.13:Providing and fixing 100 mm brass locks ( best make of approved quality ) for aluminium doors including necessary cutting and making good etc. complete 9 9.84:Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width form 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. 10 OD91050/2022-2023:Supplying fabricating and fixing 18mm thickmarine plywood of premium quality fixing with stainless steel L angles , screws and fixing 1 mm thick mica over the plywood surface area inside and outside top and bottom fixing with wooden reepers by machine pressing gum and nail and polishing with french spirit polish etc including cost of all materials and labour charge conveyance etc complete as per the directions of the departmental engineer. 11 OD91051/2022-2023:Providing and fixing autocloser hinges including cost of materials, labour charges etc complete 12 OD91052/2022-2023:Providing and fixing Stainless steel Telescopic sliders of sleek or equivalent for the cupboard including cost of materials, labour charge etc complete 13 9.79.2:Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete.50 mm 14 9.92.2:Providingand fixing chromium plated brass handles with necessary screws etc.complete:100 mm 15 OD91814/2022-2023:supply and fixingetching sun control film including cost of material fixing charges etc. complete as per the direction of engineer -in- charges 16 OD91840/2022-2023:Engaging carpenter for petty repair as per the direction of Engineer in charge

INR 1330 /-

INR 15070.0 /-

INR 6.02 Lakhs /-