|
| 1 | Demolition of floor, hearth or wall tiling or stone slab laid, bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat, including removal of debries to outside MOD land complete all as specified and directed. |
| 2 | M & L for 25 mm thick cement concrete 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in levelling course complete all as specified and directed. |
| 3 | M&L Non - skid joint free coloured Ceramic tiles (1st quality) not less than 7 mm thick of size exc 0.06 sqm but n exc 0.11 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over & including 15mm screed bed or bedding in CM 1:6 complete all as specified and directed. |
| 4 | M&L for Non-skid joint free coloured Ceramic tiles (1st quality) not less than 7mm thick tiles of size exc 0.11 sqm but n exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over & including 15mm screed bed or bedding in CM 1:6 complete all as specified and directed. |
| 5 | M&L for Non-skid joint free coloured Ceramic tiles (1st quality) not less than 7mm thick tiles of size exc 0.18 sqm but n exc 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over & including 15mm screed bed or bedding in CM 1:6 complete all as specified and directed. |
| 6 | M&L for Glazed ceramic tiles in vertical surface 350 x 250 x 7mm / 450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat of mortar in CM 1:4for laying wall tiles finishes complete all as specified and directed. |
| 7 | Dismantling of kota stone slabs and granite tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons cills or plateform etc complete all as specified and directed. |
| 8 | M&Lfor Granite work 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in coloured cement (1:2) using marble dust with admixture of pigment to match with granite shade complete all as specified and directed. |
| 9 | M & L for machine cut & machine polished kota stone slab 18 to 20 mm thick as in kitchen plateform, treads of stepslaid over and including 15 mm thick screed bed in CM 1:6, jointed with grey cement slurry mixed with colour pigment to match the shade of the slab, rubbing and polishing complete all as specified and directed. |
| 10 | M&L for 18 to 20mm thick machine cut kota stone slab in riser of steps, skirting,dado and pillar laid over cement mortar in 1:4base laid and jointed with grewy cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 11 | M&L for rounding to edges of Granite/ Kota stone slabs edge, such as in steps cooking plateform, and other similar situation complete all as specified and directed. |
| 12 | Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc,including removal of debries to a distance exc 1.5 Km but n. exc 2 Km. complete all as specified and directed. |
| 13 | M&L for 15 mm thick rendering in cement mortar 1:3 on fair face of brick work surface and mixing only liquid water proofing compoundas per manufacturers instructions, finished the surface even & smooth without using extra cement complete all as specified and directed. Note:- WPC will be measured & paid separately. |
| 14 | M&L for rendering 10 mm thick in CM 1:6 on brick or stone walls to be finished even and smooth (without using extra lime or cement) complete all as specified and directed. |
| 15 | M&L for 15 mm thick rendering in cement mortar 1:4 on stone / PCC block masonry wall surface, including mixing liquid water proofing compoundin second layer only as per manufacturers instructions, finished the surface even & smooth without using extra cement complete all as specified and directed. Note:- WPC will be measured & paid separately. |
| 16 | M&L for 5 mm thick rendering in cement mortar 1:3 on on ceiling, finished the surface even & smooth without using extra cement complete all as specified and directed. |
| 17 | Supply only Liquid water proofing compound complete all as specified and directed. |
| 18 | M & L for preparation of new plastered surfaces of walls & applying two coat of Distemper oil emulsion over a coat ofchalk whitening compatible primer complete all as specified and directed. |
| 19 | M&L for preparation of new plastered surfaces of walls and applying two coat of cement Base paint over a coat of primer complete all as specified and directed. |
| 20 | M&L for applying three coats of white wash on new plastered wall surface including preparation of surfaces complete all as specified and directed. |
| 21 | M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 22 | M & L for preparation of old distempered/ decorated surfaces of walls inclbrooming down, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying two coats of distemper oil emulsion complete all as specified and directed. |
| 23 | M&L for preparation of old wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 24 | M&L for preparation of old painted of steel or iron surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 25 | M&L for repairing of chajja / roof projection / roof spout by taking down old plaster applying 10mm thick rendering in cement mortar 1:3 and finishing the surface even & smooth with out using extra cement and complete surface finish with two coats of exterior emulsion etc complete all as specified and directed. |
| 26 | M&L for preparation of old decorated external surfaces of walls including brooming down, scrapping down, smoke soot, mould, moss and efflorence salt and trading oil and grease spouts and cleaning with water on wall applying one coat of Acrylic emulsion (Exterior weather coat) paint of any tint as per manufacturers instructions etc complete all as specified and directed. |
| 27 | M&L for preparation of old decorated surfaces of wallsand providing one coat of cement base paint complete all as specified and directed. |
| 28 | Demolition of concrete surfaces in ground floor and paving n.exc. 15cm thickness (below or above ground level) and removing the same to a distance of 1.5 KM including loading and dumping / levelling at the destination complete all as specified and directed. |
| 29 | M&L for 100 mm thick cement concrete 1:2:4 type B2 (using 40mm graded stone aggregate) as in floor/ hard standing etc all as specified finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed. |
| 30 | M&L for 75mm thick plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth potection including finished the surface even and smooth without using of extra cement and complete all as specified and directed. |
| 31 | Taking down chowkats or frame with shutter (with out taking off shutter from the frame)n.exc 1.5 Sqm complete all as specified and directed. |
| 32 | Taking down chowkats or frame with shutter (without taking off shutter from the frame) .exc 1.5 Sqmand n. exc 4.0 sqm area of each complete all as specified and directed. |
| 33 | Supply fabricate & fix in position anodised aluminium powder coated (minimum thickness of powder coating 50 micron of approved colour) door shutter with frame, partly glazed with 5 mm thick tinted glass and partly panelled with 9 mm thick prelaminated particle board with both side decorative laminated including rubber bead joining cleat for fixing in position, aluminium door handle 150 mm size, aluminium barrel tower bolt 200 mm size etc all as specified below complete all as specified and directed. (a) Frame (top & side) section shall of size 101.60 x 44.75 x 2.4 mm (Section No 14021) (b) Vertical Members of shutter Section shall be be of size 85.00 x 44.45 x 2.00 mm (Section No 19560) (c) Top Members of shutter Section shall be be of size 83.50 x 44.45 x 2.00 mm (Section No 19581) (d) Lock rail (Middle member) of shutter Section shall be be of size 150.00 x 44.45 x 3.00 mm (Section No 19596) (e) Bottom Members of shutter Section shall be be of size 150.00 x 44.45 x 3.10 mm (Section No 19584) (f) Glazing clip for securing glass of shutters shall be be of 0.80 mm thick (Section No 19370). |
| 34 | Supply fabricate & fix in position anodised aluminium powder coated (minimumthickness of powder coating 50 micron) threetrack window ( two shutters glazed ) with frame, glazed with 4 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat for fixing in Member for wire gauge Section shall be 18.00 x 25.00 x 1.35 (Section No 20791). position, concelled type lock for all two shutter, PVC roller etc all as specified below, including taking down old window complete all as specified and directed. (a) Frame (top & side) section shall of size 92.00 x 31.75 x 1.50 mm (Section No 20831) (b) Frame (bottom) section shall of size 92.00 x 31.75 x 1.50 mm (Section No 20832) (c) Top & side Members of shutter Section shall be be of size 18.00 x 40.00 x 1.55 (Section No 20738) (d) Shutter Interlock Section shall be be of size 18.00 x 40.00 x 1.45 (Section No 20737) (e) Bottom Members of shutter Section shall be be of size 18.00 x 40.00 x 1.55 (Section No 20736) Note:- Section No given above are of make Jidal, Contractor may use similar section of other make mention in Appx B. |
| 35 | S&F aluminium (powder coated with approved colour) ventilator, partialy glazed and partialy louvers, outer frame & mullionfabricated with aluminium section of size 82.50 mm x 38.00 mm x 1.70 mm thick (Cat No 20036), half portion glazed with 4 mm thick frosted glass including rubber beading, & glazing clip, half portaion louvers of 80 mm wide & 4 mm thick frosted glass including aluminium louver patti including S.S wire gauge of fixing of 0.36mm dia and 1.40 width of aparture with 25x3mm thick aluminium strip with screw to upper half portion of ventilator all fitting & fixture and fixed in position including taking down old ventilator complete all as specified and directed.Note:-(i) Section No given above are of make Jindal, Contractor may use similar section of other make mention in Appx B |
| 36 | S & F in repairs20 mm dia Curtain rails, mild steel, chromium plated with fixing brackets / concealed brackets & holders, stops, rollers etc. decorative type complete all as specified and directed. |
| 37 | Dismantling wrought iron or mild steel or cast iron work of any description not otherwise provided for complete all as specified and directed. |
| 38 | M & L for framed work such as grills, gratings, etc. with ends of bars houldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 39 | M&L for hollow Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161:1979 grade St-240 complete all as specified and directed. |
| 40 | M&L for preparation of new surfaces of steel exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 41 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for including removal of debries to outside MOD land complete all as specified and directed. |
| 42 | M & L for plain cement concrete type E-2 (1:5:10), using 40 mm graded stone aggregate, for filling sunken portion of toilet and similar work complete all as specified and directed. |
| 43 | Demolition of reinforced cement concrete including removing the same to a distance of 1.5 KM including loading and dumping/ levelling at the destination complete all as specified and directed. |
| 44 | M&L for Pre cast Reinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregates as in cover slab for manholes/soakage well and similar works supported on walls set in cement mortar 1:6 complete all as specified and directed. Note:- Reinforcement steel will be measured & paid separately. |
| 45 | M & L for mild steel TMT bars 10 mm dia, cut to length, bent to shape required including bending, and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 46 | M&L for cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in coping, benching and like including weathering, slightly round or chamfered angles and throating as directed and including necessary use and waste of formwork complete all as specified and directed. |
| 47 | Demolition of brick work/ stone work /PCC block masonry built in Cement mortar complete all as specified and directed. |
| 48 | M&L for Cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation, filling & mass concrete complete all as specified and directed. |
| 49 | M&L for providing precast cement concrete(1:5:8) (using 20mm graded stone aggregate ) solid building blocks exc 10 cm in width (with plain or inter locking joints as directed) setting in CM 1:6 complete in wall, pillars and similar works complete all as specified and directed. |
| 50 | Dismantling ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. |
| 51 | M & L 4mm thick asbestos cement plain building boards, fixed to timber framework with screws complete all as specified and directed. |
| 52 | M & L 12mmPerforated particle board/ tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed with nails to timber frame work or with staples on snap grid complete all as specified and directed. |
| 53 | S&F false ceiling with 12 mm thick of size 1.20m x 1.80m POP sheets fixed with machine screaws on and including GI channel 22 gauge thick grid work, main joints placed at 1.20m center to center, cross joints placed at 450mm centre to centre, hanging wiht 22 gauge GI strip suspenders from roof, \"J\" hooks bolts and nuts etc and treating the POP sheets with thin layer of POP with gypsum anhydrous binder and prepare the surface till smooth surface is achieved and applying two coats of plastic paint of any pattern and design over a coat of primer on ceiling sheets all complete as required as per manufacture\"s instructions and as directed by the Engr-in-charge. Note : (a) Pattern and design shall be directed byEngr-in-charge during execution of work(b) The exposure surface of the false ceiling shall be joint less seen smooth to receive paint. (c) The POP sheets shall be fixed with suitable screwsbelow the grid shall not be placed over the grid). |
| 54 | M & L decorative conrnices/moulding using POP of cross sectional dimension exc.25 Sqcm and n.exc 50 Sqcm as per pattern and design as approved and fixed in position including preparation of surfaces and applying two coats of plastic paint over primers match with the ceiling sheets complete all as specified and directed. Note : Pattern and desin shall be directed by Engr-in-Charge during execution of work. |
| 55 | Supply and fix in repairs 10 Litre capacity PVC syphonic action type flushing cistern low level with inlet ball valve, float, handle, flush pipe 32mm, PVC connection 450 mm fixed in position and connecting complete all as specified and directed. |
| 56 | S&F in repairs white Vitreous china wash down water closet (pedestal pattern) with fixing bolt, with plastic water closet seat, white, closed pattern with flat bottom, and cover with aluminised hinging device, including all connections complete all as specified and directed. |
| 57 | Supply and fix in repairs white vitreous china squatting pan ‘ORISSA’ pattern of size 580mm x 440 mm white with integral foot rests with cast iron ‘P’ or ‘S’ trap, front or back inlet including all connection and provision of lime concrete base complete all as specified and directed. |
| 58 | S&Fin repair white vitreous china wash hand basin of size550 x 400 mm, fixed over & including MS brackets comprising of the following items :-(a) Waste fitting 32 mm dia brass chromium plated with long screwed shanks and fly nut, flange end, bedded in red lead cement and other end fixed complete.(b) 15 mm size Pillar tap fancy typev cast copper alloy with capstan head, chromium plated screwed down high pressure with or withoutlettered hot or cold with long screwed shank and fly nut screwed for iron pipe complete .(c) LDPE/PVC waste pipe 32 mm dia 1000 mm long complete. |
| 59 | S&F in repair 15 mm size bib cockshort body cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete all as specified and directed.Make: Plumber cat part No EC-0202 or equivalent makes mentioned in Appx \"B\" to PS. |
| 60 | S&F in repair 15 mm size bib cocklong body cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete all as specified and directed. Make: Plumber cat part No EC-0203 or equivalent makes mentioned in Appx \"B\" to PS. |
| 61 | S & F in repairs 15 mm size CP pillar cock long nose cast copper alloy,chromium plated, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make : Plumber cat part No EC-0106 or equivalent makes mentioned in Appx \"B\" to PS. |
| 62 | S&F in repair 15 mm size stop cock, cast copper alloy, chromium plated with long shank, fancy type with capstan head, screwed down, screwed both end for iron pipes complete all as specified and directed. |
| 63 | S&F in repair 15 mm size angle cock, cast copper alloy, chromium plated with long shank, fancy type with capstan head, screwed down, screwed both end for iron pipes complete all as specified and directed. Make: Plumber cat part No EC-0507 or equivalent makes mentioned in Appx \"B\" to PS. |
| 64 | S & F in repairs brass chromium plated overhead shower 125 mm size with 225 mm arm and flange for 15 mm inlet pipe complete all as specified and directed. |
| 65 | S&F in repair 450 mm long PVC connections 15 mm size with PTMT nuts at both end complete all as specified and directed. |
| 66 | S&F in repair 600 mm long PVC connections 15 mm size with PTMT nuts at both end complete all as specified and directed. |
| 67 | Taking down steel water tubing and connection 15mm dia bore and removal from site. |
| 68 | Taking down steel water tubing and connection 20mm dia bore and removal from site. |
| 69 | Refixing 15mm old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) |
| 70 | Refixing 20mm old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) |
| 71 | Supply and fix 15 mm outer dia CPVCpipes SDR 11 & plain CPVC SER 11 fittings, fixed on wall concealed or exposed /ceiling or laying in floors complete all as specified and directed.Note:- Cutting chease wherever required will be measured & paid separately. |
| 72 | Supply and fix 20 mm outer dia CPVCpipes SDR 11 & plain CPVC SER 11 fittings, fixed on wall concelled or exposed /ceiling or laying in floors complete all as specified and directed.Note:- Cutting chease wherever required will be measured & paid separately. |
| 73 | M&L for cutting chases, of girth not exceeding 10 cm for concealed water tubing or concealed conduit wiring, etc. in stone / brick masonry wall built in cement mortar and making good, disturbed surface in Cement mortar 1:3 complete all as specified and directed. |
| 74 | M & L 15mm Tubes, \"medium grade\" galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 75 | M & L 20mm Tubes, \"medium grade\" galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 76 | S&F in repair 100 mm dia Cast iron sand cast pipe, for soil, waste and vent in any length with or without ears, fixed on wall with MS clamp, with cement joints, complete all as specified and directed. |
| 77 | S&F in repair 75 mm dia Cast iron sand cast pipe, for soil, waste and vent in any length with or without ears, fixed on wall with MS clamp, with cement joints, complete all as specified and directed. |
| 78 | S&F in repair 100 mm Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed. |
| 79 | S&F in repair 100 mm dia bore Cast iron oval access door bend (any radius) diminishing pieces or tapers (Larger bore measured) complete all as specified and directed. |
| 80 | S&F in repair 75 mm dia bore Cast iron oval access door bend (any radius) diminishing pieces or tapers (Larger bore measured) complete all as specified and directed. |
| 81 | S&F in repair cast iron vent cowl 100 mm bore dia complete all as specified and directed. |
| 82 | S&F in repair cast iron vent cowl 75 mm bore dia complete all as specified and directed. |
| 83 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc, including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed. |
| 84 | S&F PVC (SWR) pipes 75 mm diasingle socketed, in any length, with rubber ring joints jointed with solvent cement , fixed to walls complete all as specified and directed. |
| 85 | S&F PVC (SWR) pipes 75 mm diasingle socketed, in any length, with rubber ring joints jointed with solvent cement, laid in trenches or in floors complete all as specified and directed. |
| 86 | S&F PVC (SWR) pipes 110 mm diasingle socketed, in any length, with rubber ring joints jointed with solvent cement , fixed to walls complete all as specified and directed. |
| 87 | S&F PVC (SWR) pipes 110 mm diasingle socketed, in any length, with rubber ring joints jointed with solvent cement , laid in trenches or in floors complete all as specified and directed. |
| 88 | S&F PVC (SWR) bends 110 mm dia complete all as specified and directed. |
| 89 | S&F PVC (SWR) bends 75 mm dia complete all as specified and directed. |
| 90 | S&F PVC (SWR) vent cowl 110 mm dia complete all as specified and directed. |
| 91 | S&F PVC (SWR) vent cowl 75 mm dia complete all as specified and directed. |
| 92 | S & F PVC (SWR) branch piece, 110mm double (double Y) equal or unequal complete all as specified and directed. |
| 93 | S & F PVC (SWR) branch piece, 75mm double (double Y) equal or unequal complete all as specified and directed. |
| 94 | S & F PVC (SWR) junction single, 110mm(Single T) equal or unequal complete all as specified and directed. |
| 95 | S & F PVC (SWR) junction single, 75mm(Single T) equal or unequal complete all as specified and directed. |
| 96 | S & F PVC (SWR) floor trap, 75mmplain with grating including jointing with solvent cement complete all as specified and directed. |
| 97 | S & F PVC (SWR) gully trap 125 / 110mm, setting and jointing with solvent cement complete all as specified and directed. |
| 98 | S&F in repair SS Grating of size 150 mm x 150 mm fixed with white or grey cement complete all as specified and directed. |
| 99 | S&F in repair 32 mm dia Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2, fixed as in spout pipe and making good disturbed surface in CM 1:3 complete all as specified and directed. |
| 100 | M&L for cutting holes into or through stone/PCC block wall built cm. and making good in cm 1:3 or PCC type B-1 on required Superficial area n exc 150 sq.cm complete all as specified and directed. |
| 101 | S&F in repair 600 mm x 450 mm x 5 mm thick mirror selected quality, mounted on 4-5 mm thick water proof plywood (BWP grade), with aluminium angle beading all around, fixed on wall with nylon sleeve & cadmium plated screws complete all as specified and directed. |
| 102 | S&F in repair Health Fauset (Hand shower) with 8mm dia 1 metre longeasy flex tube and in chorme finish & wall hook complete all as specified and directed.Make: Plumber cat part No IT-1904 or equivalent make mentioned in Appx \"B\" to PS. |
| 103 | S&F in repair Waste pipe of PVC 31/32 mm x 800mm long complete all as specified and directed.Make: Prayag Cat No 3272 |
| 104 | Taking down carefully (copper/aluminum) unsv point wiring complete of any type (batten/surface conduit or concealed) for light point, fan point, bell point, socket point or power point includingfixture and fitting such as switches, ceiling roses, pendants , regulators, sockets , light fitting etc. removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions seperately) and making good the disturbed surfaces of wall / floor or ceiling to match with existing surface and finishing the surfaces with distemper / white washing / colour washing as per existing complete all as specified and directed. |
| 105 | Taking down carefully by unscrewing from fitting and fixtures such as ceiling fittings, bulk head fittings, tube light fittings, street light, flood LED lights etc complete all as specified and directed. |
| 106 | M&L for concealed point wiring for one light / Fan point controlled by one, one way switch complete with 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke(FRLS) cable 1100 volts grade ISI marked drawn through and including Heavy duty PVC rigid conduit not less than 20 mm dia, including all accessories like bend, tees, junction boxes etc.including 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke cable as a earth wire connected to common earth dolly, etc excluding flush box suitable for modular switches complete all as specified and directed. Make of wire: L&T/RR Kabel/Finolex Note: Rate of point wiring shall include cutting chases for conduit/flush boxes etc. |
| 107 | M&L for point wiring for power point with PVC insulated and unsheathed multistranded FRLS copper conductor single core 2.5sqmm (nominalarea) cable using approved colour code as per IS drawing in and incl PVC casing and capping with all accessories suitable for modular type fitment including provision of modular flush boxes of suitable size and thickness as per IScomplete alongwith copper earth wire PVC insulated & unsheathed multistranded (FRLS) copper conductor cableof size 2.5 sqmm as continous earth wire connected to common earth and erth dolly complete all as specified and making good disturbed surfaces of wall, floor or ceiling with plaster and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as specified and directed. Make of wire: L&T/RR Kabel/Finolex Make of PVC Capping: Finolex/Precision/Prince |
| 108 | All as per item No 5 above but wiring with 4.0 Sqmm multi-stranded copper conductor PVC insulated, unsheathed fire retardant low smoke, cable and 4.0Sqmm multi-stranded copper conductor PVC insulated, unsheathed fire retardant low smoke, cable as continous earth wire connected to common earth dolly for 15 Amps multipurpose socket outlet on independent board, controlled with one way switch complete all as specified and directed. Make of wire : L&T/RR Kabel/Finolex |
| 109 | S & F industrial type plug & socket board SP & N enclosure with 2 pole and earth metal plug & socket complete with 10 Amp MCB SP, complete all as specified and directed. Make: Legrandcat part No : 607841 or equivelent make mentioned in Appx \"B\" to PS. |
| 110 | M & L for module cover plate with frame as per site requirement for following module:- Make : Legrand/C&S Electric/Havells |
| 111 | (a)4 module |
| 112 | (b) 6 module |
| 113 | (c) 8 module |
| 114 | M & L for Modular metal Flush box as per site requirement. Make : Legrand/C&S Electric/Havells |
| 115 | (a) 4 module |
| 116 | (b) 6/8 module |
| 117 | M & L for modular switch 1 way 6 Amp 1 Module complete all as specified and directed. Make : Legrand Arteor series Cat Part No : 573400 / Kolors (Krest-white) / Crabtree or equivelent make mentioned in Appx \"B\" to PS. |
| 118 | M &L for Modular fan step regulator 100 watt 2 module complete all as specified and directed.Make :- Legrand Arteor series Cat Part No : 573416 / Kolors (Krest-white) / Crabtree or equivelent make mentioned in Appx \"B\" to PS. |
| 119 | S&F energy efficient LED tube light fitting integrated batten type with built in LED Chip & integral LED driver 20 watt, channel housing & diffuser of length 1200 mm (approx.) with all accessories, fixing arrangement internally pre-wired, fixed in position & connecting complete all as specified and directed. Make : Wipro / Philips / Havells |
| 120 | Supply and fixing in repair recess mounted LED luminaire with full diffuser 36 watt of 2x2 grid for new age work space, powder coated luminaire with minimum 100lm/watt efficiency,25000 to 50000 working hours and 6500CCT complete all as specified and directed.Make: Wipro/Philips/Syska. |
| 121 | Supply and fix in repair roundrecess mounted LED slim luminaire with full diffuser 24 watt suitable for opearting voltage 220-240VAC and inbuilt driver, powder coated luminaire with minimum 100lm/watt efficacy, 25000 to 50000 working hours and 6000CCT complete all as specified and directed.Make : Philips / Havells / Wipro |
