Fenders Repair Works On Modu Sagar Bhushan- 1 ) Yokohoma Fenders Body Surface And Valve Area Has To Be Checked For Damages, If Any And Same Has To Be Rectified.Size: 3.3Mtr X6.6Mtr 3 2 ) Fender Jewellary To Be Supplied And Renewed. At Present Fenders A, VISakhapatnam-Andhra Pradesh

Fenders Repair Works On Modu Sagar Bhushan- 1 ) Yokohoma Fenders Body Surface And Valve Area Has To Be Checked For Damages, If Any And Same Has To Be Rectified.Size: 3.3Mtr X6.6Mtr 3 2 ) Fender Jewellary To Be Supplied And Renewed. At Present Fenders Are Without Jewellary.All Materials Required For Jewellary Under ContractS Scope. 4 Bill Of Material Required For Each Fender :- 5 ( A ) Radial & Axial Hot Dip Galvanized Chain Dia 16 Mm X100 Mm Lengthgrade 80 Qty Reqd = 140 Mtrs 6 ( B ) Hot Dip Galvanized Center Ring 25 Mm Thick ( Id 85 Mm ) To Connect Intersecting Chains, Qty Reqd= 56 Nos 7 ( C ) D Shackles 16 Mm Grade 80 , Capacity = 4.75 Tons, ( To Connect Rign & Chain ) , Crosby Make, Qty Reqd= 224 Nos 8 ( D ) Used & Undamaged Tyreod 1020 Mm X Id 510 Mm Qty Reqd = 56 Nos 9 ( E ) Fender Lifting Chain - Hot Dip Galvanized Dia 20 Mm X 100 Mm Length Grade 80Qty Reqd = 2.5 Mtrs 10 ( F ) Liftign Sling Galvanized Wire Rope, 26 Mm Diaqty Reqd = 12 Mtr Long X 2 Nos 11 ( G ) Fender Safety / Securing Chain - Hot Dip Galvaized Dia = 20 Mm Dia X 100 Mm Length Grade 80 Qty Reqd-15Mtrs Long X3 Nos 12 ( H ) Towing Plate 35 Mm Thick With Eye ( Top Plate Od 600 Mm, Id 450 Mm ) Qty Reqd = 2 Nos 13 ( I ) Towing Plate 35 Mm Thick With Eye ( Top Plate Od 650 Mm, Id 450 Mm ) Qty Reqd = 2 Nos 14 ( J ) Valve Cover Plateqty Reqd = 2 Nos 15 ( K ) 10 Ton Swl Regular Swivel, Qty Reqd = 2 Nos 16 ( L ) 10 Ton Swl DShackles Crosby Make, Qty Reqd = 8 Nos 17 ( M ) Rubber Sleeves Od = 125 Mm X 600 Mm Lengthqty Reqd = 120 Nos 18 ( N ) Air Fill Up Valve , Qty Reqd = 2 No 19 ( O ) Air Safety Valve , Qty Reqd = 2 No 20 3 ) The Following Tests To Be Carried Out After Repair. ( A ) Air Leakage Test- 0.5 Kgf / Sqcm. ( B ) Set The Safety Valve At 1.8Kgf / Sq.Cm 21 Supply And Fitment Of Hot Dip Galvanized Dia 20 Mm X 100 Mmlength Grade 80Qty Reqd = 2.5 Mtrsper Fender

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	03-09-2022	Due date extension 2	Date	07-09-2022
2	07-09-2022	Due date extension 3	Date	12-09-2022
3	12-09-2022	Due date extension 4	Date	15-09-2022
4	15-09-2022	Due date extension 5	Date	19-09-2022
5	19-09-2022	Due date extension 6	Date	21-09-2022
6	29-08-2022	Due date extension	Date	03-09-2022

INR 525 /-

INR 15000.0 /-

Refer document