Military Engineer Services-MES has published Provision Of Sensor Based Lighting Control System, 2 Kva Isolation Transformer At Hrdf, Antisuicide Fan Rods And Certain Works At Offrs Mess Bar At Afa Hyderabad. Submission Date for this Tender is 01-10-2022. Transformer Supply Tenders in hyderabad Telangana. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 30-Aug-2022 | Certain amendment in tender pages | Other | 05-09-2022 |
| 2 | 05-Sep-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 12-09-2022 |
| 3 | 07-Sep-2022 | Date postponed | Date | 17-09-2022 |
| 4 | 07-Sep-2022 | Certain amendment in BOQ item | Other | 17-09-2022 |
| 5 | 15-Sep-2022 | Amendment in discription of BOQ item No 3 | Other | 24-09-2022 |
| 6 | 15-Sep-2022 | Corrigendum No 4 | Date | 24-09-2022 |
| 7 | 23-Sep-2022 | extn of date | Date | 01-10-2022 |
| 8 | 23-Sep-2022 | Certain amendment in BOQ | Other | 01-10-2022 |
| Sl. No. | Item Description |
| 1 | M & Lfor point wiring with 1.5 Sqmm copper conductor unsheathed multistranded FRLS PVC insulated 1100 volts grade, single core FRLS cable with earth continuity conductor of 1.5 sqmm PVC insutated copper conductor including suitable rigid PVC casing & caping of suitable size with accessories fixed on stone wall etc. including terminal boxes made out of 1.2mm thick MS sheet along with 3mm thick top laminated bakelite sheet for housing switches, switch socket, regulators etc for one light point controlled by one way 5 Amps switch. |
| 2 | S & Fswitch Piano flushtype, single pole, one way, 5 Amps, 230 volts, ISI marked complete all as specified and as directed |
| 3 | S & F 1X36W sensor base LED light fitting size 600mm x 600mm recess mounting light fitting with inbuilt PIR( Passive infrared) sensor, (automatic motion sensor), CRCA housing 6500K 28000lm 220-240 V, lp rating IP 20 glare free homogeneous illumination including LED driven with all accessories internally pre- wired, connecting up with three core twisted flexible copper conductor complete all as specified and directed by Engr-in -Charge. Make- Philips cat part No- RC 383B LED 36s -6500 PSU OD WH PIR or equivalent . |
| 4 | S & F Isolation Transformer ofcapacity2 KVA, 230/230 V (Fixed Ratio), 2 wire, single phase, 50 hz, ONAN Air cooled immersed copper wound indoor type isolation transformer complete with first filling of IS: 335 ISI marked filtered & dehydrated transformer oil electrostatic shield between primary 230 V (2 wire) & secondary 230V (2 wire) complete & other standard fitting/ accessories including suitable size of platform all as specified and directed by Engr-in-charge |
| 5 | S&F of Sub Main wiring with two runs of6.0sq.mm. (nominal area) single core PVC insulated unsheathed FRLS cable multi-stranded copper conductor 1100 Voltsdrawn through and including stove enamelled steel conduitof suitable size but not less than 40mm dia, with all fittings, on surfaces of wall / ceiling / roof duly fixed with fixing clamps including MS box of thickness not less than 1.2mm,and duly earthed with 01 run of 6.0 sq.mm. (nominal area) single core PVC insulated unsheathed FRLS cable multi-stranded copper conductor cablegreen in colour as continuous earthing wire complete all as specified and directed by Engr-in-Charge Note:-(i) Necessary MS dummy plates & MS rigid junction boxes for identifying junction as required on site/directed by Engr-in-charge shall deemed to be included in the quoted rate. (ii) The wiring shall be done strictly by following proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads. (iii) Three runs of cable and one run of steel conduitwill be measured as one uint. |
| 6 | M&L Earthing complete with copper earth plate electrode 600x600x3.15mm thick buried directly in ground vertically to a depth of not less than 2.25 M below ground level with the top edge of earth plate at a depth of not less than 1.5m below ground level connected to copper earth strip of size 20 x 3 mm as earth lead by means of brazing etc all as shown in electrical plate No 3 connected to earthing test point as specified or indicated including testing on completion. Note:- (1) The unit rate shall also include for earth work in any type of soil, PCC (1:2:4) type B1 chamber, pre-cast RCC (1:2:4) type B-1 using 20mm graded stone aggregate cover 50mm thick reinforced with welded steel wire fabric (XPM) weight not less than 4 Kg/sqm, funnel with watering pipe 20mm dia medium grade,GI protection pipe light grade 40mm dia and wire mesh complete in addition to item No. 1(a) to (e) of preamble (notes) under sub-heading earthing, specified on Sl. Page Nos. 422 & 423 of SSR Part-II. 2) Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately. 3) All the joints should be brazed only bybrass nuts/ bolts/ washers can be used in the test point complete all as specified and as directed. |
| 7 | Taking down ceiling fan,of any size any make fixed/ hanged at different location in Air Force station and conventionalfan rod into Anti suicide fan rod and re-fixing the ceiling fan on the same location in original position complete all as directed by Engr- in -Charge. |
| 8 | S&F of anti suicide fandown rod made up of MS size 457mm (18"") white colour for ceiling fan of any size and any make as per manufacture recommendation complete all as specified and directed . |
| 9 | S&F of 500 mm (24"") MS down Rod (Anti Suicide fan Rod)white colour for ceiling fan of any size and any make as per manufacture recommendation complete all as specified and directed . |
| 10 | S&F rubber reel insulator of suitable size for ceiling fan with necessary clamp and nut & bolt complete all as specified and directed |
| 11 | Taking down carefully unserviceable point wiringoflight points, fan, socketout let on TW battens/PVC pipes/casing & caping including material like sockets, switches, ceiling roses, regulators, light fittings etc and removing the materials from site and making good the disturbed portion of walls/floors ceiling etc complete to match with existing finish all as specified and as directed. |
| 12 | Taking down carefullyserviceable reccess mounted2"x2" LEDfiting light andmaking good the disturbed surface all as specified and as directed. Note- surviceable light to be refixed at other location as directed by Engr- in - Charge. |
| 13 | M & L for Point wiring with 1.5 Sqmm multistranded copper conductor wire with unsheathed, FRLS grade PVC insulated, single core with earth continuity conductor of 1.5 sqmm FRLS grade PVC insulated multistranded copper conductor and including rigid PVC conduit of suitable size but not less than 20mm dia and allaccessories fixed to the surface of the roof/ walls or in chases etc. including terminal boxes suitable for cover plates made out of MS sheet of thicknessnot lessthan 1.2mm thickfor fixing of switches, fan regulators socket outlet etccomplete all as specified and as directed for the following :- Note :- Cover plates shall be measured seperately |
| 14 | (a) One light point controlled by one switch |
| 15 | (b) One three pin socket 5 Amps on independent board. |
| 16 | (c) One ceiling / Exhaust fanpoint controlled by one switch |
| 17 | All as per Ser item No 13 above but with 2.5 sq mm multistranded copper wire with 2.5 Sq mm multistranded copper wire as earth continuity conductor in and including PVC conduit (not less than 20 mm) complete all as specified and as directed for 15Asocket. |
| 18 | S & Fmodular switch 1 way 6 Amp one way 230 V AC complete all as specified and as directed. |
| 19 | S & Fmodular switch Socket Combination 3 pin 5 Amp flush type complete all as specified and as directed. |
| 20 | S & Fmodular switch Socket Combination 16Amp 6 pin 3 modulecomplete all as specified and as directed. |
| 21 | S & Fmodular Fan Regulator 2 modulecomplete all as specified and as directed. |
| 22 | S&F of ceiling rose, three terminal, PVC/polycarbonate, isolated body, ISI markedcomplete all as specified and as directed. |
| 23 | S & Fwhite cover plate with frame 12 modularcomplete all as specified and as directed. |
| 24 | S & Fwhite cover plate with frame 8 modularcomplete all as specified and as directed. |
| 25 | S & Fwhite cover plate with frame 3 modularcomplete all as specified and as directed. |
| 26 | S&F LED attractive and decorative strip type light 11/15 watts system lumen efficiency > 110 Lm/W operating voltage between 140 -270 V AC power factormore than 0.90% LED driving current < 70 % of rate maximum forward current THD less than 20 % CRI more then 80% luminaire driver with 2 KV surge protection overload protection No load protection all as specified and directed.Make -Luker cat part No - LS5050 or equvalent |
| 27 | S&F LED Spot light luminaire, 18 Watts with latest LED technology and efficient optics ensuring perfectly illumination and unparalleled light dirstribution high optically effcient serrated diffuser isolated multistage CCCV drive with voltage range 150-270V AC temp range 0 to 50 Deg, CRI >80 class I SDCM <5 driver efficiency >85 % power factor > 0.95 THD< 10 % colour Temp 6500 K short circuit and over protection surge protection 3KV in CM safty extra low voltage safe level <60 V DC IP20 protected with 70% of its initial lumen maintained including all accessories and provision of PVC sheathed 3 core 1.5 sqmm cable for connection complete all as specified and as directed. Make- Luker Cat part No- LCOB18 or equvalent |
| 28 | S & Fceiling fan230 V, 1200 mm sweep BEE 2 star rated and connecting up including provision of cable from ceiling rose or connector to fan and making necessary hanging arrangment of ceiling fanby providing U- type clamp with fasteners, bolt, washer including grouting complete all as specifed and directed by Engineer-in-Charge. |
| 29 | Dismantling False ceiling boards with grids any description, fixed in any position with screws etc all as specified and as directed. |
| 30 | S&F POP double layered suspended false ceiling grid system with galvanised steel section frame work of perimeter channel 30mm x20mmx27mm depth 0.55 mm thick, intermediate channel 15mmx 15mmx45mm depth, 0.9mm thick ceiling section 26mm x 26mm x 51.5mm depth 0.55mm thick and ceiling angle 25mm x10mm x0.55mm thick including fixing 1200mm long cross channels to be interlocked between main runners at 600mm c/c making a module of 1200mmx600mm cross channels to be suspended independentlyand fixing with 12mm thick plain Gypsum boards and treated with plaster of paris for flush look and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed. |
| 31 | Taking down Wall panelling of any description and in any position etc all as specified and as directed. |
| 32 | S&F lnsulated PVC Wall Lining consisting of PVC Insulated Panels having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted into the wall as per manufacturer"s instruction complete all as specified and as directed. |
| 33 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frameas per manufacturer"s instruction complete all as specified and as directed. |
| 34 | S&F of Prelaminated particle board 12mm thick, interior grade, prelaminated both sides with decorative choice laminations, fixed with screws to timber frame workcomplete all as specified and as directed. |
| 35 | S&F 6mm thick Toughened glass fixed to heavy duty double sliding door track, adhesive handle and all necessary fittings for securing glass, etc complete all as specified and as directed |
| 36 | S&F 12mm thick toughened stained glass door with one see through line in center, of approx size 1.20m x 2.10m (single leaf) with approved design/ Air force logo not less than 0.30 Sqm on each leaf, white on white deep acid etching and including fixed with following fiitingsa)Door set L-321 top pivot -01Nos, b) Door set lock L-325-01Nos, c) Door set floor spring FS-120 - 01Nos, d) Glass Handle of 300mm size-02Nos (It includes all necessary hardwares required for functioning)complete for each door, all as specified and directed by Engr In Charge. |
| 37 | Dismantling floor tiling, hearth and wall tiling incl cement mortar bedding (but not backing) including removal of debris from the site,complete all as specified and as directed |
| 38 | M&L Vitrified ceramic tiles 10mm thick, light coloured (square/rectangular), area of each tile notexceeding 0.36 sqm, in floors, dados, skirting, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including screed bed in CM (1:4) 15mm thick complete all as specified and directed by Engr-in-Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
