Public Works Department-PWD has published Supply Installation Testing Commissioning Of Fire Fighting System At Government Medical College Anantnag. Estimated Cost Rs. 160.00 Lacs. Submission Date for this Tender is 31-08-2022. Fire Fighting Consumable Tenders in anantnag Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | FIRE PUMPS |
| 2 | Supplying,installation,testingandcommissioningof Electric driven Main Fire Pump suitablefor automatic operationandconsistingoffollowing,completeinall respects, as required : |
| 3 | Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. |
| 4 | Suitable HP Squirrel cage induction motor, TEFC, synchronousspeed1500RPM,suitableforoperation on415volts,3phase50Hz,ACsupplywithIP55 protectionforenclosure,horizontalfootmountedtype with Class-"F" insulation, conforming to IS-325. |
| 5 | M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. |
| 6 | Suitablecementconcretefoundationdulyplastered with anti vibration pads. |
| 7 | 1620 lpm at 70 m Head |
| 8 | Supplying,installation,testingandcommissioningof diesel engine driven main fire pump suitable for automatic operation and consistingof following, completeinallrespects,asrequired:(DieselDriven Pump) |
| 9 | Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. |
| 10 | SuitableHP,1500RPMwatercooledwithradiator, diesel engine conforming to relevant IS standard completewithautostartingmechanism,12/24volts electricstartingequipment,dieseltank,exhaustpipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required. |
| 11 | SuitableHP,1500RPMwatercooledwithradiator, diesel engine conforming to relevant IS standard completewithautostartingmechanism,12/24volts electricstartingequipment,dieseltank,exhaustpipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required. |
| 12 | M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required. |
| 13 | Suitablecementconcretefoundationdulyplastered and with anti vibration pads. |
| 14 | 1620 lpm at 70 m Head |
| 15 | Supplying,installation,testingandcommissioningof electricdrivenpressurisationpumpsuitablefor automaticoperationandconsistingoffollowing, complete in all respects, as required : (Jockey Pump) |
| 16 | Horizontaltype,multistage,centrifugalpumpofcast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520. |
| 17 | SuitableHPsquirellcageinductionmotorTEFCtype suitableforoperationon415volts,3phase50Hz AC supply with IP 55 class of protection for enclosure, horizontalfootmountedtypewithClass-"F"insulation, conforming to IS : 325. |
| 18 | M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. |
| 19 | Suitablecementconcretefoundationdulyplastered and with anti vibration pads. |
| 20 | 180 lpm at 70 m Head |
| 21 | Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) |
| 22 | (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520 |
| 23 | b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-"F" insulation, conforming to IS-325. |
| 24 | (c) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. |
| 25 | (d) Suitable cement concrete foundation duly plastered and with anti vibration pads. |
| 26 | 900 lpm at 35 m Head |
| 27 | 450 lpm at 35 m Head |
| 28 | CONTROL PANEL for Main Pumps |
| 29 | Fabrication, supply, Insallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet,compartmentalisedwithhingedlockabledoors, dustandverminproof,powdercoatedofapproved shade after 7 tank treatment process, cable alley, inter-connectionwithsuitablesizecopperconductor cable/solidcopper strip, havingswitchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitableformainfirepump,pressurisationpump& dieselpumpsetcompleteasperCPWDspecification withfollowingincomingandOutgoings,suitablefor operationon415V,3phase,50HzAcSupplywith enclosure protection class IP 42 as required : |
| 30 | Incomings |
| 31 | 400A, 50kA4 Pole MCCB, Ics=100% Icu Rating |
| 32 | Digital Voltmeter 0-500V with selector switch |
| 33 | Ammeter (0-400 A) with selector swtich & CTs etc. |
| 34 | LEDtypeRYBphaseindicatinglamps,ON,OFF,trip indicating lamps |
| 35 | Set of CopperBus Bar 500Amps |
| 36 | Outgoings |
| 37 | ( Note:Alloutgoingfeedersforpumpsshouldhave digital Ammeter with selector switches,and LED type ON, OFF, trip indicating lamps) |
| 38 | Main Fire Pump |
| 39 | 200Amp,50kATPNMCCB,Ics=100%Icu,withfully automaticStar/Deltastartersuitablefor100hppump withoverloadprotection,currentsensingtypesingle phasepreventorcompletewithallacceessoriesand internalwiringrequiredforautomaticoperation, selector switch for local/remote, auto/manual/OFF operation |
| 40 | Jockey Pump |
| 41 | 100 Amp, 50kA TPN MCCB, Ics=100% Icu, with Suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventorcompletewithallacceessoriesandinternal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. |
| 42 | DIESEL ENGINE CONTROL |
| 43 | Control for diesel engine comprising - |
| 44 | Automatic/Manualselctorswitch&3attemptsstarting device,timersandrelaysasrequired,pushbuttons, start/stop in manual mode |
| 45 | Indicatinglampforhigh/LowLub.Oilpressure,High Water Temp and Engine on indication |
| 46 | Battery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0-20 A DC Ammeter |
| 47 | All standard relays and accessories for automatic operation of diesel engine |
| 48 | System Controller |
| 49 | Designing,Supply,Installation,Testingand commissioning of system controllertocontrol operation ofmainelectricfirepump,dieselpump, Pressurization pump,Terracepumpinsequenceasperspecification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specification |
| 50 | Control Panel For Terrace Booster Pumps |
| 51 | Providing, fixing, testing and commissioning of control panel for Terrace Booster pumps. Incoming: MCCB 35A 1 set of Phase indicating lamps, 1 set of 35A Al bus bars, 1No Ammeter, 1No Voltmeter with phase selector switch Feeder for Booster Pumps - 1 No. 1 No. 32A TP MCCB without releases. DOL starter with over load relay, single phase preventor and indicating lamps with ON/OFF push buttons. 1 No. Automanual selector switch. Suitable for booster pumps |
| 52 | PIPES & ACCESSORIES |
| 53 | Providinglaying,testing&commissioningof"C"class heavydutyMSPipeconformingtoIS1239/3589i/c fittingslikeelbows,tees,flanges,tapers,nutsbolts, gasketsetc.ingroundincludingwelding,excavation& providingcementconcreteblocksassupports, anticorrosivetreatmentwithcoaltar/asphalttapeasper IS10221,refillingthetrenchetc.offollowingsizes complete as required. |
| 54 | 80 mm dia |
| 55 | 100 mm dia |
| 56 | 150mm dia |
| 57 | Providing,laying,testing&commissioningof "C"class heavydutyMSpipeconformingtoIS3589/IS1239 includingWelding,fittingslikeelbows,tees,flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : |
| 58 | 25mm Dia |
| 59 | 50mm dia |
| 60 | 80mm dia |
| 61 | 100mm dia |
| 62 | 150mm dia |
| 63 | 200mm dia |
| 64 | Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required : |
| 65 | Single headed Stainless steel |
| 66 | Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/ StainlessSteel couplingand cast iron wheel, ISImarked,conformingtoIS5290(typeA)withblank Gunmetal/ Stainless Steel cap and chain as required : |
| 67 | Single headed Stainless steel |
| 68 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI markedcompletewithnuts,bolts,washers,gaskets conforming to IS 13095 of following sizes as required : |
| 69 | 65mm dia |
| 70 | 80mm dia |
| 71 | 100mm dia |
| 72 | Supplying,fixing,testing&commissioningofdouble flangedsluicevalveofratingPN1.6withnonrising spindle,bronze/gunmetalseat,ISImarkedcomplete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required : |
| 73 | 150mm dia |
| 74 | 200mm dia |
| 75 | Providing,installation,testingandcommissioningof non-returnvalveoffollowingsizesconfirmingtoIS: 5312 complete with rubber gasket, GI bolts, nuts,washers etc.as required : |
| 76 | 80mm dia |
| 77 | 100mm dia |
| 78 | 150mm dia |
| 79 | Providing,installation,testingandcommissioningof stainlesssteelY-strainerfabricatedoutof1.6mm thickstainlesssteel,Grade304,sheetwith3mmdia holes with stainless steel flange. |
| 80 | 80mm dia |
| 81 | 150mm dia |
| 82 | Supplying and fixing 63 mm dia, 15 m long RRL hose pipewith63mmdiamaleandfemalecouplingsduly boundwithGIwire,rivetsetc.conformingtoIS636 (type-A) as required : |
| 83 | :Stainless Steel (Grade 304) |
| 84 | Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. |
| 85 | 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 |
| 86 | 20 mm nominal internal dia gun metal globe valve & nozzle. |
| 87 | Drum and brackets for fixing the equipmets on wall. 30m |
| 88 | Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required : |
| 89 | Stainless Steel (Grade 304) |
| 90 | Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : |
| 91 | 2 way-100 mm dia M.S. Pipe |
| 92 | 4 way - 150 mm dia M.S. Pipe |
| 93 | Supplying and fixing air vessel made of 250 mm dia, 8mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required. |
| 94 | Providing and fixing standard fireman"s axe with heavy insulated rubber handle conforming to IS: 926 complete. |
| 95 | Providing and fixing fully glazed MS fully welded construction double leaf door shutter for fire hydrantstation fabricated from MS 50x50x6 mm angle iron frame, fixed to wall and hinged MS 40x40x5 mm angle iron door shutter with required MS sash bars for glazing complete with locking arrangements, stove enamelled fire red finish with "FIRE HYDRANT" written in front. |
| 96 | Approximate size 2100x900mm. |
| 97 | Providing and fixing pressure gauges with isolation cocks and chrome plated copper pipes as hydrant station to read pressure from 0-20kg/cm2 complete and of dial dia 150 mm. |
| 98 | FIRE EXTINGUSIER |
| 99 | Supply, installation, testing and commissioning ISI marked (IS:15683) Fire Extinguisher, Carbon-di-oxide type capacity 4.5 Kg. Flat base including valve, discharge hose of not less than 10 mm dia, 1M long and complete in all respects including initial fill with CO2 gas conforming to IS:307-1966 and wall suspension braket as required as per specifications. |
| 100 | Supply, installation, testing and commissioning ISI marked (IS:15683) portable fire extinguisher, water (gas pressure) type capacity 9 kg with gun metal cap and nozzle and complete in allrespectsincluding initial fill and wall suspension brackets as required as per specifications. |
| 101 | Supply, installation, testing and commissioning ISI marked (IS:15683) portable fire extinguisher, DCP Catridge type capacity 6 kg with gun metal cap and nozzle and complete in allrespectsincluding initial fill and wall suspension brackets as required as per specifications. |
| 102 | Mechanical Foam type Fire Extinguisher. In HP Mild Steel Cylinders ISI marked / approved fitted with pressure indicating gauge, internal tube, squeeze lever type valve fully charged complete in all respects including wall suspension bracket / trolley mounted and confoming to IS:910 50 Litres (trolley mounted) |
| 103 | Providingand fixing double flanged vertical air vessel fabricated from 10mm M.S. plate with dished ends from 10mm M.S. plate, outside with one coat of primer and two coats of synthetic enamel paint of approved shade, complete with approved quality of pressure switches, pressure gauge and all other required accessories to operate commonly main fire pump, sprinkler pump and Jockey pump atdropof pressure, automatically at required pressure setting; |
| 104 | Recommended dia.: 450 |
| 105 | Height of shell: 2000mm |
| 106 | Working pressure: 7 Kg/Sq.cm |
| 107 | Test Pressure: 10 Kg/Sq.cm |
| 108 | Providing & fixing of MS Hose cabinet outdoor type of size 0.90 Mx 0.60 Mx 0.50 M made of 2mm thick MS sheet with 6mm thick glazed glass doors i/c necessary locking arrangement suitable to accomodate 2nos 15m long hoses, one no branch pipe, etc. and mounted on wall or with raised brick platform. The cabinet shall be painted with redcolour shade No. 536 of IS: 5 externally & white internally complete in all respects for external hydrant and as per enclosed specification. |
| 109 | Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 |
| 110 | Providing and fixing fire brigade suction hose coupling (draw out connection) with nut for female coupling as per IS-902 complete with 150mm dia. Suction pipe and foot valve (to be connected to static tank) complete as required andas per enclosed specification. |
| 111 | Providing and fixing reinforced neoprene rubber vibration eliminators/expansion joints (to provide relief from stresses at pipe flanges) suitable for upto 20 kg/cm2 pressure, complete as perspecification. |
| 112 | 150mm dia. |
| 113 | 80mm dia. |
| 114 | Supplying, laying/ fixing, testing and commissioning of following thickness resin bonded fiber glass pipe section insulation having density 80 kg/cum or mineral wool (non combustible) having density of 144 Kg/ cu m duly covered with a layer of 120 gm/sqm polythene sheet (vapour barrier) on existing pipe and finally applying 0.63mm aluminium sheet cladding complete with type3 , grade 1 roofing feltstrip(as per IS:1322 as amended up to date ) at joints etc. as per specifications and as required. |
| 115 | 50mm |
| 116 | Providing & fixing of 25mm dia. gunmetal air release valve with all fittings and forged ball valve on header complete as required and as per enclosed specification. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
