|
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20 mm nominal size) |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand(zone-III) : 8 graded stone aggregate 40 mm nominal size). |
| 3 | Centering and shuttering including strutting, propping etc. and removal of form for : Edges of slabs and breaks in floors and walls. Under 20 cm wide |
| 4 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 5 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) |
| 6 | Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, molding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shadeArea of slab over 0.50 sqm. |
| 7 | Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality with necessary screws etc. complete. Size 65 mm |
| 8 | Providing and fixing chromium plated brass handles with necessary screws etc. complete: 100 mm |
| 9 | Providing and fixing aluminium tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : 250x10 mm |
| 10 | Providing and fixing aluminium hanging floor door stopper ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868)transparent or dyed to required colour and shade with necessary screws etc. complete. Twin rubber stopper |
| 11 | Providing and fixing 2nd class teak wood lipping/ moulded beading or Taj beading of size 18X5 mm fixed with wooden adhesive of approved quality and screws/ nails on the edges of the Pre-laminated particle board as per direction of Engineer-in-charge. |
| 12 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.0 mm thick |
| 13 | Providing and fixing plain lining with necessary screws/nuts & bolts/nails including a coat of approved primer on one face and fixed on wooden /steel frame work, complete as per direction of Engineer-in-charge. (Frame work shall be paid for separately) 12mm thick commercial ply conforming to IS : 1328 BWR type. |
| 14 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover |
| 15 | Providing and fixing ball bearing for rolling shutters. |
| 16 | Extra for providing mechanical device chain and crank operation for operating rolling shutters Exceeding 10.00 sqm and upto 16.80 sqm in the area |
| 17 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS : 15622 , of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm |
| 18 | Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4coarse sand) bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3kg/sqm |
| 19 | Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. |
| 20 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering unto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer\"s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I. |
| 21 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) |
| 22 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 23 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm |
| 24 | Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution |
| 25 | French spirit polishing : Two or more coats on new works including a coat of wood filler |
| 26 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 27 | Removing white or colour wash by scrapping and sand papering and preparing the surface smoothincluding necessary repairs to scratches etc. complete |
| 28 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 meters lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 29 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 meters lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) |
| 30 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge.. In cement mortar |
| 31 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead : Of area 3 sq. meters and below |
| 32 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm |
| 33 | Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50metres lead : Thickness above 25 mm up to 40 mm |
| 34 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. |
| 35 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. |
| 36 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 37 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Anodised aluminium (anodized transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 38 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 39 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) With float glass panes of 8 mm thickness |
| 40 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg., for doors, including cost of cutting floors ,embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mm thickness. |
| 41 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc. to be paid separately). |
| 42 | Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Lighteflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fireerformance as per BS:476 (part 6 &7), humidity resistance of 100%, thermalonductivity < 0.043 W/m K as per ASTM18:1991, in true horizontal level suspended on interlocking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile,rotary stiched double webbed white with 6 mm reveal profile (white/black),comprising of main-T runners of size 15x42 mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm andecondary intermediate cross-T of size 15x42m of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing 80 grams per sqm) i.e. 50 mm long, 8 mmuter diameter M-6 dash fasteners, 6 mm dia fullyhreaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall S.S screws. The work shall be carried out as per specifications,rawing and as per directions of the Engineer-in-Charge. With 15 mm thick integral densified micro edge light weight calcium silicate false ceiling tiles |
| 43 | Providing and fixing 18mm thick Commercial ply( Century / greenlam or equivalent) conforming to IS: 1328 (type-1) for plain lining / wall cladding / Table, side unit, cupboard counter/Drawer/ partation etc. with necessary screws etc.Complete as per direction of Engineer-in-charge. |
| 44 | Providing & fixing 6mm thick commercial plywood ( Century / greenlam or equivalent) for plain lining / wall cladding / Table, side unit, cupboard counter/Drawer/ partation etc. with necessary screws etc. with nails, screws etc. complete making for wall cupboard , counter etc. and as per direction of engineer-in- charge |
| 45 | Providing and fixing Soft close telescopic drawer channels of hettich or equivalent510 mm long fixing with necessary screws etc. for couboard counter , tables etc. all complete as per direction of Engineer-in-charge. |
| 46 | Providing and fixing rubber wood lipping/ moulded beading of size 18mm fixed with wooden adhesive of approved quality on the edges of the Commercial blockboard/ plywood as per direction of Engineer-in-charge. |
| 47 | Providing and fixing PVC wire manager for work stationof approved qualityincluding necessary holes in 18mm thick commercial ply/ blockboard etc. complete as per direction of Engineer-in-charge. |
| 48 | Providing and fixing bright finished cylindrical lock of approved brand and manufacturer with one dead bolt Complete with fixture and fitting as per direction of Engineer-in-charge. |
| 49 | Repair of rolling shutter including welding, gressing etc. all complete as per direction of Engineer-in-charge |
| 50 | credit for door window |
| 51 | credit for M.S. Steel |
| 52 | credit for floor spring |
| 53 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthingthe point with 1.5 sq.mm FRLS PVC insulated copper conductorsingle core cable etc. as required. Group C |
| 54 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit asrequired.2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 55 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit asrequired.2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 56 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess includingcutting the wall and making good the same in case of recessedconduit as required. 25 mm |
| 57 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providingand fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 58 | Supplying and fixing following way, single pole and neutral, sheetsteel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar,din bar, interconnections, powder painted including earthing etc.as required. (But without MCB/RCCB/Isolator) 8 way, Double door |
| 59 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C”curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single Pole |
| 60 | Supplying and fixing following rating,ouble pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63A |
| 61 | Supplying and fixing call bell/ buzzer suitable for single phase,230 V, complete as required. |
| 62 | Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith20 A, “C” curve, SP, MCB, in sheet steel enclosure, on surfaceor in recess, with chained metal cover for the socket out let andcomplete with connections, testing and commissioning etc. asrequired |
| 63 | Supply and Fixing of36 Watt ( 2 X 2)LED Recess/Surface typefitting complete in all respect as reqd at site. |
| 64 | Supply and Fixing of18 watt Downlighter LED Recess/Surfacetype fittingcomplete in all respect as reqd at site. |
| 65 | Supply and fixing suitable size G.I box with modular plate & connection in front on surface or in recess, including providing & fixing 3 nos. 6 pin, 15/16 amp. Socket outlet & 1 no. 15/16 AMP. Modular switches, 1no. Indicator, connection etc. complete as reqd. |
| 66 | Supply and fixingCeiling fan Size of 1200 mm single phase heavy duty complete with motor, blade fan and cover complete accessories in all respect. i/c dismantle of exisiting fan as reqd at site. |
| 67 | S/I/T/C of 450 mm exhaust Fansleek and stylish design Rust proof body and blades noiseless & light weight at the reqd site.i/c dismantle of exisiting fan as reqd at site. |
| 68 | S/I/T/C of 2 mega pixel IP Day-Night vision Dome/Bullet HD camera , or upper grade modelwith all accessories completeas complete as reqd. at site. ( Make : CP PLUS/Hikvision or Equivalent) |
| 69 | Supply & fixing ofHD Network video recorder 4 CH with 2 SATAHDD SLOT complete with all accessories etcas complete as reqd. at site.( Make : CP PLUS/Hikvision or Equivalent) |
| 70 | Supply & Fixing of Power Supply 12V,20Amp, for 4 camera Connection ,BIS markas complete as reqd. at site. |
| 71 | Supply & Fixing of Hard Disc 4 TB with surveillance as complete as reqd. at site. Make (WD/ SEGATE) |
| 72 | Supply & Layingof CAT-6 cablefully copper ISI Mark as complete as reqd at site . |
| 73 | Supplying & Fixing of LED TV 32 with all accessoriescompleteas complete as reqd. at site.(Make :-Samsung / LG/ Sony) |
| 74 | S/I/T/Cof Rack 4 U with complete accessories as reqd. at site. |
| 75 | Supplying & fixing of BNC connector as complete as reqd at site. |
| 76 | Supplying & fixing of DC connector as complete as reqd at site. |
| 77 | S/I/T/C of Air Cooled Hi Wall split type Air Conditioners with Remote Capacity 1.5 TR (3 Star) ) |
| 78 | Supply and fixing of Soft Copper Refrigerant Pipe 5/2 & 1/4\" having thickeness of 1.0 mm for 1.5 TR A/C Units Suitable with NBR Tubular Insulation on both suction & Liquid. |
| 79 | Supply and fixing of 4C (1.5 Sqmm) Electrical Wiring from Indoor to Outdoor unit (ISI) |
| 80 | Supply and fixing 3C(2.5 Sqmm)Electrical Wire Main Supply from TPN to Outdoor unit (ISI) 3 Phase |
| 81 | Supply and fixing of 25 mm Dia Hard PVC Drain Pipe longwith 4 mm thick kinni foam insultation elblow, Socket solvent, clamps etc. for condenste water |
| 82 | S/I/T/C of Voltage Stabilizer 4 kVA with Hi-low Cut / TDR suitable for 1.5TR A.C. (150 V - 285 V) |
| 83 | Supply & Fixing of M.S. Angle Iron Stand for Outdoor Units with Loading cage suitablefor 1.5 Tr split type Air conditioner. |
| 84 | Add Cost index 21.46% on DSR-2016 |
| 85 | Deduct -Less 9.50% on DSR-2016 |