|
| 1 | Earth work in excavation of foundation trenches in all Kindes of soil depositing the excavated materials with all leads and lifts T & P shoring & Shuttering if required etc. complete as directed by the E.I.C. |
| 2 | Supplying filling in foundation and plinth with sand including watering ramming, cost, conveyance, royalties and all taxes of materials and cost of labour with T & P required for the work etc. complete |
| 3 | Cement concrete (1:3:6) in foundation and floors i.e., below the base course of terrazzo flooring using 4 cm (1 ½ “) sizeincluding cost, conveyance, royalties and cost of all labour with T & P required for the work complete. |
| 4 | Brick work with Fly Ash bricks of size 23cmx11cmx8cm and crushing strength not less than 75 kg/cm2 in C.M.(1:6) in foundation and plinth including all charges[Vide AR(P) 71 item No.3] |
| 5 | R.C.C. work of proportion (M-20) inhaving a minimum compressive strength (in work test) 150 Kg/Cm² in 15cm cubes at 28 days after mixing and test … etc. complete.Column Base |
| 6 | Plinth Bend |
| 7 | Column in Superstructur |
| 8 | 1st Floor |
| 9 | 2nd Floor |
| 10 | Lintal Bend |
| 11 | 1st Floor |
| 12 | 2nd Floor |
| 13 | Roof Beam |
| 14 | 1st Floor |
| 15 | 2nd Floor |
| 16 | Roof Slab |
| 17 | 1st Floor |
| 18 | 2nd Floor |
| 19 | Chajja |
| 20 | 1st Floor |
| 21 | 2nd Floor |
| 22 | Stair Case |
| 23 | 1st Floor |
| 24 | Brick work with Fly Ash bricks of size 23cmx11cmx8cm and crushing strength not less than 75 kg/cm2 in C.M.(1:6) in super stuctureincluding all charges |
| 25 | 1st Floor |
| 26 | 2nd Floor |
| 27 | Brick work with Fly Ash bricks of size 23cmx11cmx8cm and crushing strength not less than 75 kg/cm2 in C.M.(1:4) in Super stuctureincluding all charges(1st Floor) |
| 28 | 12mm (½”) thick cement plaster (1:6) in finished smooth to outside smooth surface of brick walls after racking out joints including watering and curing etc. complete |
| 29 | 1st Floor |
| 30 | 2nd Floor |
| 31 | 16mm (5/8\") thick cement plaster (1:6) in finished smooth to inside smooth surface of brick walls after racking out smooth surface of brick walls after racking out joints including wateringand curing etc.complete with cost,conveyance royalties,all taxes and cost of all materials and cost of all labour with T&P required for the work complete. |
| 32 | 1st Floor |
| 33 | 2nd Floor |
| 34 | 6 mm thick cement plaster ( 1:4) to RCC surfaces finish smooth including closed deep chipping and slurry treatment per 1 sqm. including wateringand curing etc.complete with cost,conveyance royalties,all taxes and cost of all materials and cost of all labour with T&P required for the work complete. |
| 35 | 1st Floor |
| 36 | 2nd Floor |
| 37 | 20mm (3/4\") thick cement plaster (1:6) over brick/stone workafter racking out joints including wateringand curing etc.complete with cost,conveyance royalties,all taxes and cost of all materials and cost of all labour with T&P required for the work complete. |
| 38 | Cutting straightening coiled or bent up M.S Rods or Tor steel bending binding, moulding and joining if necessary andn tying the grills and placing in position as required for RCC work and for providing Fan hooks hoistisng lowering and laying including cost conveyance and all taxes of M.S Rods or Tor steel and binding wires of 18 to gauge as required for the RCC work for bending,binding and tying the grills in all floors (payment will be made on weight of M.S Rods or sTor steel only and no separate payment will be made towards the weight of binding wires). |
| 39 | 1st Floor |
| 40 | 2nd Floor |
| 41 | Cement concrete (1:2:4) with 12 mm size hard crusher broken granite chips granite stone metals including lowering laying concrete watering and curing etc.complete to required levels laid in layers not exceeding 6\" thick including cost conveyance, royalties and all taxes of all materials and cost of all labour with T&P required for the work etc.complete as directed by the Engineer-in-charge. |
| 42 | 1st Floor |
| 43 | Dressed seasoned sal wood framed of D/W fixed...........etc complete. |
| 44 | 1st Floor |
| 45 | Supplying fitting fixing of Ms griil on angle (35X35X6)mm door window . |
| 46 | 1st Floor |
| 47 | 2nd Floor |
| 48 | Supplying fitting fixing of Ms griil on angle ( Grill Gate ) |
| 49 | Providing and fixing Iron Door Shutters with Angle Iron Frames including fixing of Hold Fasts, Aldrops, Hinges etc. all complete including fixing with C.C. (1:2:4) complete.1st Floor |
| 50 | Supplying, fitting, fixing up window (sliding type) made up aluminum Section 9778, as windows frame section No. 4095, 4096 and 9777, 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer-incharge. |
| 51 | 1st Floor |
| 52 | 2nd Floor |
| 53 | Providing 5mm thick black glass |
| 54 | 1st Floor |
| 55 | 2nd Floor |
| 56 | Providing fitting, fixing of Al. door with OEL anodized Al. door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member and 12mm thick pre-laminated board fixed on door frame by means of tapered clip No. 4660 and the frame to be completed by means of jointing angle No. 1855 including all cost of labour, T&P , hire charges of drilling machine, labour charges etc. complete. |
| 57 | 1st Floor |
| 58 | Novapana Board |
| 59 | 1st Floor |
| 60 | ACP Sheet |
| 61 | 1st Floor |
| 62 | 5 mm thick Black Glass |
| 63 | 1st Floor |
| 64 | Supplying ,Fitting and fixing of 32mm thick AEON Brand Plywood Door shutter complete with hard ware fitting…etc…complete.(al. Fitting) |
| 65 | 2.5cm (1\") thick A.S. flooring (1:2:4) using 12mm c.b.h.g. chips [Vide AR page-84/2] |
| 66 | Supplying, fitting and fixing vetrifed tile in floors of size 600mm x 600mm of approved make confirming to IS 13755 laid on 20 mm thick cement mortar (1:4) (1 cement:4 course sand) and filling joints with white cement of approved qualiy including cost of all materials, labour T&P etc required for the work all complete as per direction of the Engineer-in-Charge.(For new work only) |
| 67 | 1st Floor |
| 68 | Vitrified (industrial Tile |
| 69 | Supplying fitting & fixing of Wall Tiles ...........etc Complete |
| 70 | Supplying fitting & fixing of CERAMIC Wall Tiles ...........etc Complete1ST FLOOR |
| 71 | Supplying ,fitting and fixing of Chequred tiles(leather polished) in dados skitring and rasers of steps of approved make on 12mm thick C.M(1:3) and filing joints with whitw cement etc complete. |
| 72 | 1st Floor |
| 73 | 2nd Floor |
| 74 | Finishing wall surface of walls with Cement based wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete. |
| 75 | 1st Floor |
| 76 | 2nd Floor |
| 77 | Wall painting two coats with plastic emulsion paint over a coat of primer of approved shade on new work including cost of paint.Data for 10 Sqm |
| 78 | Distempering with two coats over a coat of primer of approved shade on new work including cost of paint.Data for 10 Sqm1st Floor |
| 79 | 2nd Floor |
| 80 | Painting Two coat weather coat over a coat of primer all floors with brush to wall surface after cleaning the surface including watering and curing etc. complete |
| 81 | 1st Floor |
| 82 | 2nd Floor |
| 83 | Painting two coats wood/iron work.over a coat of primerData for 9.30 Sqm |
| 84 | 1st Floor |
| 85 | 2nd Floor |
| 86 | 2.5cm thick grading concrete (1:2:2) on roof slab with 4.7mm size hard granite chips. |
| 87 | 1st Floor |
| 88 | 2nd Floor |
| 89 | Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect. |
| 90 | 1st Floor |
| 91 | 2nd Floor |
| 92 | Supplying, fitting and fixing of False ceilling with Arm strong Silhouette main runner, cross tee, wall angle with fine fishered RH-99 board on 4 walls to be fixed by means of steel screw, PVC plug & the NRC 0.55 sound attenction 34 db Arm strong grid 2\"-0\"\"x2\"-0\"\" suspended from ceilling including cost, conveyance, taxes of all materials, labour, T&P etc. required for the work complete in all respect as per direction of the Engineer-in-charge.1st Floor |
| 93 | Site Clearance Excavation of soil using Hydraulic Excavator and Tippers with Disposal upto 2 km lead, including cutting and loading in tippers, trimming buttom and side slopes, in accordance with requirements of line grades and cross section, and transporting to the embankment location within all laeds and lifts as per technical specifications and as directed by the Engineer-in-charge. |
| 94 | Supplying and laying of precast interlocking concrete block of 150 mm thick approved design and filling the joints with sand on the prepared surface including cost of all charges. |
| 95 | Recessed wiring to light/ fan/ exhaust fan/ call bell point with 1.5 sqmm FR PVC pipe insulated single core multistrand cupper conductor of ISI marked with 20mm dia non- metallic PVC flexable conduit with 5 AMP. 250 V piano type switch ISI arked and ceiling rose ISI marked on MS box having front Bakelite cover of suitable size, Ms box with 1.5 sqmm FR PVC insulated single core multistrand copper conducter as earth wire including all accessories and connection as per direction of Engineer incharge. (make of wire Finolex / L&T/ Ancor/ Havels/ Vguard) a) Group- A (GF) |
| 96 | a) Group- A (FF) |
| 97 | b) Group- B (GF) |
| 98 | b) Group- B (FF) |
| 99 | c) Group- C (GF) |
| 100 | c) Group- C (FF) |
| 101 | Recesssed wiring to 3 pin 5amp plug point with 1.5sqmm FR PVC insulated single core multistrand cupper condutor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5amp 250V piono typeswitch ISI marked (GF) |
| 102 | Recesssed wiring to 3 pin 5amp plug point with 1.5sqmm FR PVC insulated single core multistrand cupper condutor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5amp 250V piono typeswitch ISI marked (FF) |
| 103 | S/F of 5/6 a switch and 3 pin 5/6 a socket on existing board (GF) |
| 104 | S/F of 5/6 a switch and 3 pin 5/6 a socket on existing board (FF) |
| 105 | Cirecuit submain wiring in PVC conduit 2x1.5 sqmm+1x1.5 sqmm (GF) |
| 106 | 2x1.5 sqmm+1x1.5 sqmm (FF) |
| 107 | 2x2.5 sqmm+ 1x1.5 sqmm (GF) |
| 108 | 2x2.5 sqmm+ 1x1.5 sqmm (FF) |
| 109 | 2x4 sqmm+ 1x1.5 sqmm (GF) |
| 110 | 2x4 sqmm+ 1x1.5 sqmm (FF) |
| 111 | 2x6 sqmm+ 1x2.5 sqmm (GF) |
| 112 | 2x6 sqmm+ 1x2.5 sqmm (FF) |
| 113 | S/F of B.K angel holder without bulb (GF) |
| 114 | S/F of B.K angel holder without bulb (FF) |
| 115 | S/F of 20 Watt LED box type fitting (GF) |
| 116 | S/F of 20 Watt LED box type fitting (FF) |
| 117 | Supply of A.C Ceilling fan (Bajaj/ Elegance/ Usha) 48” fan (GF) |
| 118 | Supply of A.C Ceilling fan (Bajaj/ Elegance/ Usha) 48” fan (FF) |
| 119 | S/F of electronic fan regulator (GF) |
| 120 | S/F of electronic fan regulator (FF) |
| 121 | S/f of wall mounted fan (Make Havells/ CG heavy duty) (GF) |
| 122 | Supply of 12Watt LED bulb lamp(GF) |
| 123 | Supply of 12Watt LED bulb lamp(FF) |
| 124 | S/f of superier type call bell with bell push (GF) |
| 125 | S/f of superier type call bell with bell push (FF) |
| 126 | S/f of Exhust Fan 12\" size (Bajaj/USHA/ Havells) (GF) |
| 127 | S/f of Exhust Fan 12\" size (Bajaj/USHA/ Havells) (FF) |
| 128 | S/f of Portico light fitting (GF) |
| 129 | S/f of celling ligh 15W (Croam Round LCDD 15- CDL/ TL/WW) (GF) |
| 130 | S/f of 90 Watt LED street light fitting complete G.I bracket and all connection (Bajaj/ Havells/ crompton) (GF) |
| 131 | S/f of 3 pin 15 Amp plug with switch on board (GF) |
| 132 | S/f of 3 pin 15 Amp plug with switch on board (FF) |
| 133 | S/F of (4+12) 4way double door TPN DB with 63A 4P MCB-1no and10/32 ASP MCB 12 Nos. (Legrand/ |
| 134 | S/F of (4+12) 4way double door TPN DB with 63A 4P MCB-1no and10/32 ASP MCB 12 Nos. (Legrand/ |
| 135 | S/f of computer board (GF) |
| 136 | S/f of computer board (FF) |
| 137 | s/f of Special copper plate earthing with coppper plate 600mm x 600mmx 2.15mm thick with G.I pipe 3 meter long 40mm dia with charcole and sand with machinary encloser with cover having locking arrangements and watering pipe etc. |
| 138 | S/f of 25sqmm 3 1/2 core Aluminium Armould cable (Polycab/Nicco/havells) (GF) |
| 139 | Treching of cable with excavation of earth, laying of bricks, sand and filling of surplus earth upto the original ground level after laying 1 No 1.1 KV 25sqmm 4 core All Cable inside the trench |
| 140 | S/f of 100A TPN main switch(GF) |
| 141 | S/f of 100 A TPN Copper Busbar (GF) |
| 142 | S/f of 4x10sqmm Aluminium Armould cable (Polycab/ Nicco/ Havells) (FF) |
| 143 | S/f of 8 SWG copper wire for earthing connection (FF) |
| 144 | 1- S/f of 63A MCCB panel board made of 16SWG CR sheet with power coated with provision of following items with febrication ofsub panel board size.2- 63A 4 pole MCCB. of Legrand/ Hager/ Acheider/ Siemens.3- 100A TPN Copper Bus bar with flat .4- 32A 4 pole MCCB -4 Nos of Legrand/ Hager/ Acheider/ Siemens make.5- 63Amp TPN changeover6- Digital metering arrangement.7- Indicating lamp - 1 Set. |
| 145 | Fire Fighting |
| 146 | PH Part Supplying all materials, labour,T&Pand providing and fixing to wall or ceiling and floor pvc pipesconforming to ASTM-D-1785/04 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceilingand floor all complete as per specification and direction of the Engineer in charge.Ground Floor |
| 147 | Frist Floor |
| 148 | 25mm dia P.V.C.pipeGround Floor |
| 149 | Frist Floor |
| 150 | 32mm dia P.V.C. pipeGround Floor |
| 151 | Frist Floor |
| 152 | 40mm dia P.V.C. pipe |
| 153 | 15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make) |
| 154 | 15mm dia CPBib cock (Con-CHR-047KN Jaquar make) |
| 155 | 15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make) |
| 156 | 15mm dia CP two in one bib cock (Con-CHR-041KN Jaquar make) |
| 157 | 20mm dia CP consealed stop cock(Con-CHR-083KN Jaquar make) |
| 158 | Flush cock with wall flange (Jaquar make) (APR - ESS - 101081) |
| 159 | 25mm dia brassfull way valve (Sakti make) |
| 160 | 32mm dia brassfull way valve (Sakti make) |
| 161 | 40mm dia brassfull way valve (Sakti make) |
| 162 | 15mm dia CP Health faucet (Con-ALD-MCH-573 Jaquar make) |
| 163 | 15mm CP Extension piece |
| 164 | 15mm size C.P. flange |
| 165 | 125mm CP grating |
| 166 | 2000 liters capacityPVC water storage tank(Syntex three leyer white)( on 1st floor ) |
| 167 | supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite,payment of royality, taxes etc. all complete as perdirection ofEngineer-in-charge.Ground Floor |
| 168 | Frist Floor |
| 169 | Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proofas per P.H. specification and direction of Engineer-in-chargeGround Floor |
| 170 | Frist Floor |
| 171 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damagesincluding watering ,curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge.Ground Floor |
| 172 | Frist Floor |
| 173 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer\"s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment oftaxes etc.all complete as per P.H specification and direction of the Engineer-in-charge. 110mm U-PVC SWR Pipe(Ashirvad/Supreme Make) |
| 174 | 110mm U-PVC‘P’ Trap(Ori Plast/Finolex/Supreme Make) |
| 175 | 110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make) |
| 176 | 110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make) |
| 177 | 110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make) |
| 178 | 110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make) |
| 179 | 110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make) |
| 180 | 110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make) |
| 181 | 110mm U-PVC D/Jn door(Ori Plast/Finolex/Supreme Make) |
| 182 | 110mm U-PVC Socket (Ori Plast/Finolex/Supreme Make) |
| 183 | Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI \"p\" or \"s\" trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.580mm size Orissa pan (Hindware/Parryware/Neycer make) |
| 184 | Supplying all materials, labour, T&P and fixing glazed earthenware squatting plate of size 600mmx350mm with integral longitudinal flushing pipe including cutting the door & mending good the damages embedding the plate in 25mm. Cement mortar(1:8) laid over 150mm. Cement concrete(1:5:10) using 40mm hard granite metal including 6mm. Thick white cement finishing at the top of the urinal foot plate etc.all complete as per specification and direction of the Engineer in charge. |
| 185 | 10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make ) |
| 186 | Supplying all materials,labour,T&P and fixing bowl pattern urinal of the following sizes including connecting the urinal with 32mm. dia pvc waste pipe 910mm. long by means of white lead mixed with chopped hemp, fixing 32mm. dia CP dome waste, 15mm. dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. all complete as per specification and direction of the Engineer in charge. Half Stall urinal |
| 187 | European water closet with \"S\" trap plain(Hindware/Parryware/Neycer make) |
| 188 | 550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Jaquarmake) with Pedestal |
| 189 | Supplying all materials, labour, T&P for fitting & fixing plain edge kitchen/wall sink of all standard sizes with a pair of bracket, C.P. waste, trap & P.V.C. waste pipe & painting brackets including supply of cement concrete & mortar etc. all complete. 24” x 18” x 10” sink |
| 190 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge25mmx600mm long CP towel rail |
| 191 | Towel ring |
| 192 | Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge.600mmx125mm plate glass shelf |
| 193 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.600mmx450mm size B.E mirror |
| 194 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in chargeCP soap holder |
| 195 | Supplying all materials labor T&P & Fitting & fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer in charge.15mm x 125mm size CP Shower(Plaza make) |
| 196 | Supplying all materials , labour, T&P and cutting holes through existing brickor laterite masonry wall for takingU-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 197 | Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 198 | Supplying all materials ,labour ,T&P and constructing Inspection Chamber ofinside size 760mmx760mmx460mmwith cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips,12mm thick cement plaster (1:3)with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxesetc.all complete as perapproved drawing, P.H specification and direction of Engineer-in-chargeInside size 76cmx76cmx46cm with 45cm dia RCC MH cover |
| 199 | Supplying all materials ,labour ,T&P and constructing gully trap chamber ofinside size 250mmx250mmwith 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinthand inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI gratingetc.all complete as per drawing,specification and direction of Engineer-in-charge |
| 200 | Supplying all materials labour T&P filling sand in lavatories well watered and rammed including lead of materials to work site. |
| 201 | Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge |
| 202 | Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge |
| 203 | Kajaria/Somany/Johnson tile 60cmx60cmGround Floor |
| 204 | Frist Floor |
| 205 | Kajaria/Somany/Johnson tile 60cmx30cmGround Floor |
| 206 | Frist Floor |
| 207 | Supplying all materials, labour, T&P and providing marble slab urinal partition wall including cutting grooves in wall and making good the damages,watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge |
| 208 | Supplying all materials, labour, T&P and providing brick work in super structure with C.B bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 209 | Fitting & fixing of Aquagurad Cooler Cum Purifier for drinking water privision. 1 nosCost of Aquaguard Cooler - Cum Purifier |
| 210 | Providing fitting,fixing of Aluminium door with anodized Aluminium door section of 9202 as vertical member , 9201 as top and 9200 as middle bottom member with frame section no. 9221 and tapered clip no. 4660 and the frame to be completed by means of jointing angle no. 1855 including all cost of labour ,T&P hire charges of drilling machine ,labour charges etc. Completeref: OBI10 |
| 211 | External S/D PortionSupplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture\"s specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge110mm dia UPVC. pipe |
| 212 | 160mm dia UPVC. pipe |
| 213 | Supplying all materials labor T&P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:1:8) with black granite chips size 46mm brick work with K.B. brick having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(1:6)12mm C.P(1:8) inside MH chamber over benching with cement slush pointing (1:3)outside the MH chamber providing painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per PH specification. MH chamber size 0.91m x 0.91 m x 0.91 m with 0.45 mdia RCC MH Cover |
| 214 | Supplying all materials labour T&P and constructing 1.40m dia x 2.60 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site. |
| 215 | 30 Users septic tank of size 3.60m x 1.10m x 2.23m Internal sizeEarth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge.1 x 4.90 x 2.40m x 1.50 = |
| 216 | Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in chargewith 1st extra lift of 1.50 m over initial laft.1 x 4.90 x 2.40m x 0.7 = |
| 217 | Supplying all materials labour T&P filling sand in foundation and plinth with well watered and rammed etc all complete as per direction of Engineer-in-charge.1 x 4.90 x 2.40m x 0.15 = |
| 218 | Supplying all materials, labor T&P providing CC (1:3:6) with 4 cm HG metal including watering curing lead of all materials to site etc. complete. 1 x 4.90 x 2.40 x 0.15 = |
| 219 | Supplying all labor T&P &Providing C.C. (1:2:4)with 12mm size brokenhard granite chips including watering curing &lead of all materials to site etc. all complete. (1 x 4.90 x 2.40 x 0.10 ) +(1 x 3.6 x 1.10 x 0.05)= |
| 220 | ProvidingC.C. (1:1½:3) with 12mm size hard granite chips of RCC workincluding hoisting and laying and curing with leadof all materials to site.(1 x 4.10 x 1.60 x 0.10)+(1 x 1.10 x 1.50 x 0.08) = |
| 221 | Supplying all materials, T&P and providing MS reinforcement for RCC work including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauges. |
| 222 | Rigid & smooth centering & sheltering for RCC work including falls work & dismantling than after casting including cost of materials in ground floor.RCC floor, roof slab chhaja up to 4.430 m height . 1 x 3.60 x 1.10 + 2(4.10+1.60)x 0.20= |
| 223 | Supplying all materials labour T&P and providing 1st class KB brick work in CM (1:3) in foundation and plinth including watering and curing and lead of materials to site. 1st footing (2 x 4.60 x 0.50 x 0.74+2 x 1.10 x 0.50 x 0.74 ),2nd footing(2 x 4.40 x 0.40 x 0.74 +2 x 1.10 x 0.40 x 0.74), 3rd footing(2 x 4.10 x 0.25 x 0.74 + 2 x 1.10 x 0.25 x 0.74)= |
| 224 | Supplying all materials labour T&P and providing 12mm thick C.P (1:3) including watering curing and conveyance of all materials to site.1 x 3.60 x 1.10+2(3.60+1.10) x2.23 +2(1.10+0.10) x 1.10 |
| 225 | Supplying all materials labour T&P and providing 12mm thick C.P (1:6) including watering curing and conveyance of all materials to site. |
| 226 | Supplying all materials labour T&P and providing cement punning including watering curing and conveyance of all materials to site.Same as inside plastering |
| 227 | Supplying all materials labour T&P and fitting and fixing 12mm dia MS/CI step iron including supply of necessary CC(1:2:4) for fixing etc. complete as per PH specification. |
| 228 | Supplying all materials, labour T&P for providing fitting & fixing 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:2:4) with 12mm size HG chips all complete including watering curing conveyance of all materials to work site payment of royalty all complete as per specification and direction of Engineer in charge. |
| 229 | Supplying all labor T&P & filling foundation and plinth with excavated materials well watered & rammed etc. all complete as per direction of EIC. |
| 230 | Supplying all materials, labour, T&P & constructing mesonary drain of size 0.30mtr x 0.45mtr drains as per P.H. design & specification including lead of all materials to site. |
| 231 | Drilling of 200mm dia bore00 mtr to 30mtr |
| 232 | 30 mtr to 60mtr |
| 233 | 60 mtr to 175.00mtr |
| 234 | Lowering of 200mm dia P.V.C casing pipes00 mtr to 30 mtrs |
| 235 | 30 mtr to 70mtr |
| 236 | Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber \"O\" ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length.200mm dia PVC (sch-80) pipe |
| 237 | Supplying all materials, labour, T&P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied directly by the department) |
| 238 | Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in chargeBy DTH Rig |
| 239 | Rocky terrain with boulder formation for 300m depth |
| 240 | 2HP single phase 3 stage vertical / horizontal submersible pump set at head range 20 to 35 meters discharge 145 to 110 LPM with outlet dia of 25mm ( |
| 241 | DOL Control panel |
| 242 | 40mm dia steel short piece |
| 243 | Well cap |
| 244 | 50mm size CI bracket |
| 245 | 2.50sqmm flat cable |
| 246 | 20mm dia rigid UPVC pipes |
| 247 | Steel rope with cover |
| 248 | Labour charges for lowering including transportation |
| 249 | 32mm HDPE pipes (Finolex/Supreme make) |
