Military Engineer Services-MES has published Special Repair To Auditorium And Provn Of 2 Nos Of Shed At Boys Cook House At Dgncc And Provn Of Drain And Cabinet Of Dgrr Officers Mess At Pratap Chowk Under Ge ( East ) Delhi Cantt-10. Submission Date for this Tender is 05-09-2022. Auditorium Construction Tenders in delhi Delhi. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 18-Aug-2022 | Corrigendum No 02 DE-29 | Date | 29-08-2022 |
| 2 | 18-Aug-2022 | Corrigendum No 01 DE-29 | BOQ | 29-08-2022 |
| 3 | 29-Aug-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 05-09-2022 |
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 Sqm eachcomplete all as specified and as directed. |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from the frames)exc. 1.5 sqm but n.exc 4 sqm eachcomplete all as specified and as directed. |
| 3 | Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be miteredcut and fusion welded at all corners, includingdrilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steelFrame (28mm x 21.5mm), sash 31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor includes cost of glass and includes all other connected accissories. Net opening will be measured for payment purpose). |
| 4 | S & F Aluminium alloy powder coated windows including aluminum powder coated frames sliding track, bottom weighting not less than 1.015 Kg/RM, sides and top not less than 0.826 Kg/RMdouble revatedand 0.55Kg/RM for window shutter with one fixed glazed shutter and twonos glazed/gauged shutter sliding type with aluminium sections as per series - A (15mm) 3 track of Jindal section numbers for sliding windwos with framed shutter including aluminium allow powder coated snap type beads handles with locking arrangement spring actionand glazing clip joint cleats rubber gaskets etc including provision of 5.5mm thick glass/ frosted glass/tinted glassof superior quality and stainless steel jali including all standard fittings, complete all as specified and as directed. |
| 5 | S & F Aluminum alloy powder coated door including frame and channel of section (Door frame single groove 101.6mm x 44.45mm x 2.1 mm, shutter top section 47.62mm x 44.45mm x 1.95mm thick, shutter bottom section 114.30mm x 44.45mm x 2.1 mm thick, shutter vertical section 85mm x 44.45mm x 1.80mm thick, shutter middle section 83.50mm x 44.45mm x 2.40mm thick & glazing clips weighing not less than 0.097 Kg/RM) including shutter fixed to sliding type/openable frame and channel as directed and approved by GE and as per IS specifications including provn of 5.5mm thickglass/ tinted glass/12mm thick prelaminated particle board as required including handles, tower bolt, floor spring heavy duty “SAMRAT” , locking arrangement “GODREJ”, rubber gasket and door stopper complete. |
| 6 | S & F Aluminium alloy powder coatedstandard hollow section for ventilotors as per approved sample and as per IS specifications, shutters weighting 0.55 kg/RM, rectangular frames of section 101.6mm x 44.45mm x 3.18mm weighting not less than 2.54Kg/RM including provision of5.5mm thick tinted glass ofsuperior quality including handles, tower bolt, hinges and all standard fittings complete all as specified and as directed. |
| 7 | M & L Vitrified ceramic tileslight shade 10mm thick (square/rectangular) area of each tile notexceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over 15 mm thick avg screed bed in CM 1:6 and including dismantling of existing floor tiles of any description including cement mortar bedding (but not backing ) and rubbish off the premises complete all as specified anddirected. |
| 8 | M & L Vitrified ceramic tiles10mm thick (square/rectangular) area of each tileexceeding 0.42 sqm tile notexceeding 1.00 sqm,on vertical surface such as in skirting/dado etc over backing coat of 10mm thick rendering CM (1:4) and including dismantling of existing tiles of any description including cement mortar bedding (but not backing ) and rubbish off the premises complete all as specified anddirected. |
| 9 | M & L Non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but notexceeding 0.18 sqm, in floors etc, setand jointed in neat cement slurry and pointed in white or Coloured cement to match laid over 15 mm thick avg screed bed in CM 1:6 and including dismantling of existing floor tiles of any description including cement mortar bedding (but not backing ) and rubbish off the premises complete all as specified anddirected. |
| 10 | M & L 20 mm thick granite (of any type) work( table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in over and including 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab , notching and mouldingincluding demolition of existing granite complete all as specified and as directed . |
| 11 | M & L for Marble work 18-20mm thick (Makrana white) as in flooring over and including 15mm thick screed bed in CM 1:6 machine cut, bedded jointed and pointed with grey cement slurry including cutting and polishing types including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and as directed. |
| 12 | S & F Designer type high quality fancy type looking mirror of size as approved by Engr-in-Charge 8-10mm thick, fixed to wall with stainless steel studs, screws, brackets and washers etc complete all as specified and as directed. |
| 13 | S & F in repairs Angle valve of CP any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms complete all as specified and as directed. (Make: Jaquar/Marc/Kohler) |
| 14 | S & F in repair 15mm bore, fancy type CP bib tap of cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified. (Make: Jaquar/Marc/Kohler) |
| 15 | S & F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed. |
| 16 | S & F in repairs SS Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed. (Make: Jaquar/Marc/Kohler) |
| 17 | S& F Brass chromium plated towel rack of size 600 mm x 350mm, fixed with brass screws, fixed in repairs, complete all as specified and as directed.(Make: Jaquar/Marc/Kohler) |
| 18 | S & F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed. |
| 19 | S&F in repairs 32 mm bore PVC waste pipe with fittings of approved make suitable for WHB, Urinals and Sink etc all as specified and directed. |
| 20 | S & F Rotational moulded polyethylene water storage tanks 1000 lts capacity, double layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete. |
| 21 | S & F Vitreous china wash basin counter ovaltype size 600x425x195mm,fixed in repairs, undergranite slab with all fitting and fixture, in repairs, complete all as specified and as directed. |
| 22 | S&FBrass CP basin mixercentral hole , for mixing hot and cold water fixed as per manufacture"s manual, with long shunk and cup washers, screwed both ends suitable for 15mm bore GI pipe joints to GI pipes or unions in repair complete all as specified and directed (Make : Jaquar/Marc/Kohler). |
| 23 | S & F Stainless steel Gratingdome125mm dia with or without hole for waste pipe, fixed in repairs, complete all as specified and as directed. |
| 24 | S & F in repairs Vitreous china floor mounted WC( Cascade) one piece type (off white) including connecetion in drain etc incl water closet seat cover CP jet spary, flushing cistern, with P or S trapwith all fitting and fixturecomplete all as specified and as directed.(Make : Jaquar or equivalent in Cera/Parryware) |
| 25 | S & F in repairs 100mm bore sand Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or fixed to wall or in floors complete all as specified and as directed. |
| 26 | S & F in repairs 100mm bore Cast iron Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed. |
| 27 | S & F in repairs 100mm bore Cast iro Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed. |
| 28 | S & F in repairs 100mm bore cast iron cowls complete all as specified and as directed. |
| 29 | S & F in repairs 100mm bore Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed. |
| 30 | Taking up or down 15mm bore steel tubing and connections including fittings complete all as specified. |
| 31 | Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified. |
| 32 | S &F 20 mm bore tubes medium grade galvanised with all fitting and fixed complete to wall and ceilingsor laid in floor. |
| 33 | S&F 15mm bore tubes medium grade galvanised with all fitting and fixed complete to wall and ceilingsor laid in floor. |
| 34 | S & F in repairs 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed |
| 35 | Demolition of brick work built in cement mortar. |
| 36 | M & Lfor Brick work with sub class ‘B’ bricks of old size, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6including demolition of brick work built in cement mortar complete all as specified and directed. |
| 37 | M & L for Preparation of old plasteredor unplastered surfaces of walls and ceilings including brooming down or scrapingdownwith steel wire brushes of smoke spots , moulds , moss efflorescent salts andtradingoil and greasy spots and applying one coat Oil emulsion distemper on wall/Ceiling completeall as specified and directed. |
| 38 | Taking down cement or cement lime plaster , any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 39 | M & L for 15mm thick rendering in cement mortar 1:4 on fair face of brick walls/ concrete surfaces and finished even and smooth without using extra cement in any position incl scafolding etc, complete all as specified and as directed. |
| 40 | M & L for 15mm thick rendering in cement mortar 1:6 on fair face of brick walls/ concrete surfaces & finished even and smooth without using extra cement in any position incl scafolding etc, complete all as specified. |
| 41 | M & L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1cement: 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern (groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove) complete including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified. |
| 42 | M & L for preparation of new plaster external wall and ceiling surfaces of and applying Two coats of 100% Premium exterior acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted)over and including priming coat of exterior primer applied and 1mm thick wall care putty complete all as specified and as directed. |
| 43 | M & L Preparation of newly plastered /unplastered surfaces of walls and ceilings applying 1mm thick Birla White/J K White wall care putty, again sand papering thus making surface good andTwo coats of Oil Bound Distemper over a coat of primer ,complete all as specified anddirected. |
| 44 | M & L rendering 15 mm thick on concrete surfaces as in ceiling/roof in CM 1:3, finished even and smooth without using extra cement including complete all as specified and as directed. |
| 45 | Dismantling of Plainor corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed. |
| 46 | S & F painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 47 | Taking out exisitng roof treatment with any type of membrane, wire brushing and cleaning top surface of tiles, cement concrete, including flashings and junction of parapets including taking out grass roots/vegetation etc, after drying from dirt, mortar, dust mortar buds, algae and all other foreign matter and brushed and wiped and drying the cleaned surface for further treatment, complete all as specified and as directed. |
| 48 | M & L Water proofing treatment comprising of the following, using APP membrane polymer based to prepaired roof surface complete all as specified and as directed:- (a) Applying evenly a coat of bituminous primer conforming to IS- 3384 @ 0.4Ltr/Sqm. Over the primed surface, apply a coat of hot blown 85/25 penetration grade bitumen conforming to IS- 702 @ 1.2 Kg/Sqm of the surface area. (b)Applying APP based polymeric membrane minimum weight 3.6kg/Sqm and of minimum thickness 3mm,reiforced with polyster non woven fabric ( weight not less than 150gm/Sqm). APP membrane will be laid by torching overlaps with a propane or butane gastorch and laid across the slope from lowest line of roof towards ridge with over laps of 75mm in length side and 100mm on the width side of membrane bonded with hot blown bitumen. (c) Over the APP membrane after laying apply a coat of solar reflective aluminum paint @ 0.15Kg/Sqm. (Note : (1) The work shall be executed through authorised applicator of manufacturer only. (2) Authrised Applicator shall be approved by GE before starting of work. (3) Guarantee: The contractor shall furnish a written guarantee for the effectiveness of the water proofing treatment for a periodof Ten yearsin favour of the GE. A sum equivalent to 2.5% (Two point Five Percent) of the cost of water proofing treatment shall be retained by the Govt from the contractor’s dues as security deposit. The contractor may, however, furnish a fixed deposit receipt in lieu from a Schedule bank pledged in favour of Garrison Engineer. |
| 49 | Providing and applying Smartcare Dampproof, a fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibers having Sun Reflectivity Index (SRI) of 105 on horizontal/vertical surfaces of roof/wall/chajjas in multiple coats @2.0 litre/sqm. Primary coat is self-priming coat of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1, damp proof : water) and other coats to be applied undiluted. The coating needs to be reinforced with 40 GSM geotextile, to sandwiched between 2nd & 3rd coat of coating. The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes complete in all respect as per the direction of Engineer-in-Charge. The work should be executed including complete materials through authorised applicator of Asian Paints or equivalent of Berger and Nerolac. Notes: (1) The work shall be executed through authorised applicator of manufacturer only.(2) Authrised Applicator shall be approved by GE before starting of work. (3) All materials shall be procured directly form manufacturer. The purchase voucher and Bill shall be produced to the Engineer-in-Charge for his verification of material. Engineer-in-Charge shalldeface the original purchase vouchers. (4) Guarantee:The contractor shall furnish a written guarantee for the effectiveness of the water proofing treatment for a periodof Eight yearsin favour of the GE. A sum equivalent to 2.5% (Two point Five Percent) of the cost of water proofing treatment shall be retained by the Govt from the contractor’s dues as security deposit. The contractor may, however, furnish a fixed deposit receipt in lieu from a Schedule bank pledged in favour of Garrison Engineer. |
| 50 | M & L for PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in roof kerb, mud stops, platform for OHT, etc., and similar type of works including weathering, slightly rounded or chamfered angles and throating complete including demolition of existing PCC all as specified and as directed. |
| 51 | S & F plain gypsum board panel 12 mm thick on ceiling with and including necessary GI frame work for seamless ceiling used with " T " , channel or any section including screws , cleats ,fasteners, clips and all required accessories , hangers etc of galvanized steel all as per manufacturer design conforming to IS-2095 and 2542(1981) the weight of the board shall be not less than 7 kg per sqm andincluding dismantling of walls and celing existing old board(fibre pulp.insulation etc) or insulation boards/slabs/blanks any thickness including cover fillets etc including two coat of OBD over a coat of chalk whitening putty complete all as specified and directed. |
| 52 | Taking down rolling shutters of any size gear operated type with gear box and crank handle/gear operated type with chain wheel and hand chain incl taking down complete accessories like shaft, top cover, guide channel,gear box etc complete all specified and directed. |
| 53 | S & F Steel rolling shutters (Gear operated)1.25mm thick with required Ball bearing for rolling shutters, including shaft, top cover, guide channel (width 75 mm deep, 50mm wide and 3.15mm thick), anchoring rod, hasp and staple erected in position as directed complete including required bevel gear box and crank handle Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed. |
| 54 | M & L two coat of synthetic enamel paint (finishing coat) over one coat of primer to newsteel surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified. |
| 55 | M & L for Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed. |
| 56 | M & L excavation in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation exc on for walls, shafts, manholes not exc 10 Sqm on plan or for laying pipes/cables etc and getting out in soft/loose soil complete all as specified and as directed. |
| 57 | Returing filling in incl spreading levelling watering and well ramming in layers not exceeding 25cm in soft or loose soil complete all as specified and as directed. |
| 58 | Removing excavatged matereials to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point in soils complete all as specified and as directed. |
| 59 | Excavation in post holes (or similar holes) in soft/loose soil each not exceeding 0.5 cum getting out, returning, filling in ramming earth or broken rubble in layers not exceeding 25 cm, watering and removing of surplus soil to a distance not exc 50m and making good surfaces, complete all as specified and as directed. |
| 60 | M & L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation, filling and mass concrete all as specified and directed. |
| 61 | M & L for Hard core of gauge exc 63mm butnot exc 100mm(broken bricks) deposited spread and leveling in layers n exc 15cm thick watred and raming to a true surface complete all as specified and directed. |
| 62 | M & L for 75mm thick Cement concrete 1:4:8 Type D-2 (using 40mm graded agg) as in sub base complete all as specified and as directed. |
| 63 | M & L for glazed ceramic tiles in vertical surface 300x600x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick screed bed in CM 1:4 complete all as specified and as directed. |
| 64 | M & L Machine cut prepolised kota stone slab flooring 18 to 20 mm thick over 15mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete |
| 65 | M & L for Coloured Machine pressed precast conctete interlocking paver block of any shape and size (Two colour combination) confirming to IS 15658-2006 of 60 mm thick, M-35 Grade with grey cement and pigmentlaid dry in floor/pathover 50mm thick sand cushion complete all as specified and as directed. |
| 66 | S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confrming to IS 1161-1979 grade St-240 complete all as specified and directed |
| 67 | M & L for PCC 1:2:4 type B-1 using 20mm graded stone agg as in surface channels complete. |
| 68 | M & Lfor Brick work with sub class ‘B’ bricks of old size, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:4 complete all as specified and directed. |
| 69 | M & L for Chequered cement concrete tiles 25cm x 25cm x 25mm thick, set, jointed and pointed in neat cement slurry over 15mm thick screed bed in CM 1:6 complete all as specieied and as directed. |
| 70 | M & L for mild steel TMT bar 10mm dia and over cut to length,bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 71 | M & L for form work to soffits of suspended slabs such as roof slabs, floor, slabs landings and stair and similar work not exc. 20 cm thick flat rough toreceive plaster all as specified and directed. |
| 72 | M & L for RCC M25 Design Mix using 20mm graded agg as in slabs, supported on walls, landings, balconies, Covers of Drain and in shelves and the like complete all as specified and as directed. |
| 73 | Fabrication & fixing of Modular wardrobe/ cupboard made out of 18-20mm thick WPC boards with 2.00mm thick fabric colour laminate sheet of approved quality and texture on all exposed sides with edge band including providing cabinet for keeping baskets/ drawers etc complete all as specified and as dirfected. (Make : Rajshree or equivalent) |
| 74 | S & F for 18-20mm thick WPC boards with laminated fabric colour on both sides, fixing in partitions of Modular kitchen cabinet & wardrobe/ cupboard complete all as specified and as dirfected. (Make : Rajshree or equivalent) |
| 75 | Supply and Fabrication & fixing of Modular wardrobe/ cupboard made out of 18-20 mm thick HDHMR boards with 2.00mm thick fabric/ glossy finish colour laminate sheet of approved quality and texture on all exposed sides with edge banding tape (machine pressed)including providing cabinet for keeping baskets/ drawers etc. complete all as specified and as directed. (Design and pattern as approved by GE). (Make : Rajshree or equivalent) |
| 76 | S & F for 18-20mm thick HDHMR boards with laminated fabric colour on both sides, fixing in partitions of Modular kitchen cabinet & wardrobe/ cupboard complete all as specified and as dirfected. (Make : Rajshree or equivalent) |
| 77 | S & F for Continuous piano type hinges, stainless steel with width of flaps 30mm, complete all as specified and as directed. |
| 78 | S & F for Fancy type Stainless steel bright polished handles oval type of size 150 mm size, complete all as specified and as directed. |
| 79 | S & F 50mm size cup board locks of brass, 2 levers including keys set, complete all as specified and as directed. |
| 80 | S & F for Magnetic catches with steel body ‘H’ type, fixed to shutter, complete all as specified and as directed. |
| 81 | S & F for Hettich soft closure hinges of premium quality, fixed in door/cup board shutters complete all as specified and as directed |
| 82 | Taking down carefully old unserviceable copper/aluminium point wiring from conduit / batten type (light, fan, socket or power point) complete such as switches, ceiling rose, pendent holder, bell ,regulator and socket etcand making good the disturbed surface of wall / floor/ ceiling etc as original complete all as directed. |
| 83 | M&L for point wiring complete with 1.5 Sq mm (nominal area) FRLS, PVC insulated un-sheathed and multistranded copper conductor cable ISI marked throughPVCconcealed conduitincluding FRLS, PVC insulated unsheathed 1.5 Sqmmmultistranded copper earth wire, connecting to common earth dolly with and incl new suitable size MS box of suitable size for fixing modular switches/sockets/fan regulator etc , with and including Modular cover plates of suitable size inand and making good surface as originalcomplete all as directed for the following:- |
| 84 | One light point / fan point/ wall fan point/ bell/ buzzer controlled by one 1-way switch/ bell push. |
| 85 | One socket outlet point 5 amps on the same board. |
| 86 | One socket outlet point 5 amps on the independent board. |
| 87 | All as per srl item No 83 here-in-before but with 2.5 SqmmFRLS copper wire with 2.50 Sqmm FRLS copper earth wire. |
| 88 | M&L in replacement for point wiring complete with 2.5 Sqmm (nominal area) FRLS, PVC insulated un-sheathed and multistranded copper conductor cable ISI marked throughPVCconduitincluding FRLS, PVC insulated unsheathed 1.5 Sqmmmultistranded copper earth wire, connecting to common earth dolly with and incl Metal flush box, hylem sheet coverof suitable size forpiano type switches/sockets/fan regulator etc , making good surface as originalcomplete all as directed for the following:- |
| 89 | One light point / fan point/ wall fan point/ bell/ buzzer controlled by one 1-way switch/ bell push. |
| 90 | One socket outlet point 5 amps on the same board. |
| 91 | One socket outlet point 5 amps on the independent board. |
| 92 | All as per srl item No. 85 here-in-before but with 2.5 sq mmFRLS copper wire with 1.5 Sqmm FRLS copper earth wire |
| 93 | S&Fof Modular switch 6 Amp, 1 way, 1module size complete all as directed. |
| 94 | S&F of Modular switch 16 Amp, 1 way, 1 module sizecomplete all as directed. |
| 95 | S&F of Modular socket 6 Amp, 2 in 1, universal type, 2 module size complete all as directed. |
| 96 | S&F of Modular socket 6/16 Amp multipurpose, 2 module sizecomplete all as directed. |
| 97 | S & Ffor switch piano, flush type single pole, one way 5 Ampcomplete all as directed. |
| 98 | S & Ffor switch piano, flush type single pole, one way 15 Ampcomplete all as directed. |
| 99 | S & Fforofsocket outlet 2 in 1, 3 pin, 5A, flush type complete all as directed. |
| 100 | S & Fforofsocket outlet 2 in 1, 3 pin, 5and 15A, flush type complete all as directed. |
| 101 | S&F of step type Fan regulator , 120 watts, piano flush type complete all as directed. |
| 102 | S&Fof Ceiling rose, insulated body, 3 terminal, 240 volts, etc complete all as directed. |
| 103 | S&F in Replacement ofModular AC Socket with 25 Amp SPmini MCB, 230 Volts, 50Hz. In 4 module sheet metal enclosure complete all as specified and as directed. |
| 104 | Supply and fixing in replacement of sheet metal encloser, SPN type with two pin & earth plug and socket (Industrial type DB) with and including one MCB SP, C Curve type of capacity 20 Amp, 10 kA complete all as directed. |
| 105 | Material and labour in replacement for Sub main wiring with 2 run of 10 Sqmm (nominal area) FR, PVC insulated, unsheathed andmultistranded copper conductor cable ISI marked, drawn in to PVC conduit with and including 10.0 Sqmm (nominal area) FR, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB complete all as specified. |
| 106 | Material and labour in replacement for Sub main wiring with 2 run of 4 Sqmm (nominal area) FR, PVC insulated, unsheathed andmultistranded copper conductor cable ISI marked, drawn in toPVC conduit with and including 4.0 Sqmm (nominal area) FR, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to AC point complete all as specified. |
| 107 | Supply and fixing in replacement of Distribution Boarddouble Doormade out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 12 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc and making all necessary connections complete all as directed. |
| 108 | Supply and fixing in replacement of Distribution Boarddouble Doormade out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc and making all necessary connections complete all as directed. |
| 109 | Supply and fixing in replacement of MCB C Curve type, 10 kA, 10 to 32 Amp, Single Pole with over load and short circuit protection complete all as directed. |
| 110 | Supply and fixing in replacement of isolator63Amp, SPN type with over load and short circuit protection complete all as directed. |
| 111 | Supply and fixing in replacement of LED mirror light fitting 10 watt, cool/warm white and making all electric connections complete all as directed. |
| 112 | Supply and fixing in replacement of LED tube light fitting, 20 watt.with and including all electric connections complete all as specified and as directed. |
| 113 | S&F in replacement of LED bulk head fitting made of cast aluminium alloy with opal glass diffuser ,complete all as specified and as directed. |
| 114 | Supply and fixing LED ceiling/Recess light fitting 10 watt, in round shape, surface type and making all electric connections complete all as directed. |
| 115 | S&F of automatic hand dryer hot air dispenser with infrared sensor 5 Star rating metal body with all accessories including all electrical connection complete all as specified and directed.and depositing old unserviceable to DGNCC store yard complete all as specifed and as directed. |
| 116 | S&F in replacement ventilatiing fan 250mm sweep 230 volt AC with & including louvers and all fixing arrangements complete depositing old unserviceable all as specified & directed. |
| 117 | S&F of wall mounted fan 400mm sweep,Copper winding, 240 Volts. 50 Hz and depositing the old u/s to DGNCC store yard,complete all as specified and as directed. |
| 118 | S&F of instant heating Geyser 03 litre capacity vertical type with steel tank and glass inner linen complete including fastners (2No.) for hanging and CP and PVC connection for inlet and outlet upto stop cock including taking down the old u/s geryser and depositing to DGNCC store yard complete all as specifed and as directed. |
| 119 | S&F of Geyser 25 litre capacity vertical type with steel tank and glass inner linen complete including fastners (4No.) for hanging and CP and PVC connection for inlet and outletwater connection upto stop cock(excluding stop cock) complete all as specifed and as directed. |
| 120 | Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 |
| 121 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm with stainless steel wire staples complete all as specifed and as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
