Military Engineer Services-MES has published Addn / Altn Of Bldg No.P-81 / 01, P-82 / 02 In Accn And Stores Of 18 Madras And Certain Sanctioned Work At Shankar Vihar Under Age B / R-Ii ( S ) Of Ge ( South ) Delhi Cantt-10. Submission Date for this Tender is 03-09-2022. Building Work Tenders in delhi Delhi. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 27-Aug-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 03-09-2022 |
| Sl. No. | Item Description |
| 1 | Demolition of brick work built in cement mortar including all quions, pillars, ashlar facings, dressed stone work and precast articles etc. and removing the rubbish out side the MoD land complete all as specified and directed by Engr-in-Charge. |
| 2 | M&L for Brick work with sub class "B" bricks , straight or curved on plan exc 6 m mean radius built in cement mortar (1:6),(up to two story Bldg) complete all as specified and directed by Engr-in-Charge. |
| 3 | M&L for Brick work with sub class "B" bricks , straight or curved on in half brick thick wallbuilt in cement mortar (1:4),(up to two story bldgs) complete all as specified and directed by Engr-in-Charge. |
| 4 | Demolition of stone slab and tiles of any description or thickness on cooking platform, floors, aprons, skirting etc laid bedded and pointed in any morter and removing the rubbish out side the MoD land complete all as specified and directed by Engr-in-Charge. |
| 5 | M&L for Granite (of any type) work, 18-20 mm thk (table rubbed and polished) in steps, jambs, pillars, top of slab, skirtings with necessary holewhere ever required andcement mortar bedding of 20mm thick in CM 1:6 including pointing in white cement using marble dust with admixture of pigment to match including rounded edges with shade of granite complete all as specified and directed by Engr-in-Charge. |
| 6 | M&L for Machine cut18-20 mm thick Kota stone slab flooring as in treads ofstaircase over cement screed bed 15mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed by Engr-in-Charge. |
| 7 | M&L for Kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar, laid over cement screed of 10mm thick in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed by Engr-in-Charge. |
| 8 | Roughening surfaces of old concrete floor/wall by picking, sweeping clean and washing down with water to remove dust, etc and brushing and applying neat cement slurry with 3.0 Kg of cement per sq metre complete all as specified and directed by Engr-in-Charge. |
| 9 | M&L for light shade ceramic tiles 10 mm thick (square/rectangular) polished, area of each tile not exceeding 0.36 sqm, as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr-in-Charge. |
| 10 | M&L for light shade ceramic tiles 10 mm thick (square/rectangular) polished, area of each tile not exceeding 0.36 sqm, as in skirting/dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr-in-Charge. |
| 11 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge. |
| 12 | M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr-in-Charge. |
| 13 | M&L for joint free glazed ceramic coloured tiles in vertical surface 450x300x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed by Engr-in-Charge. |
| 14 | M&L for screed bed or bedding layer of cement mortar 15 mm thick for floor finishes in 1:6, complete all as specified and directed by Engr-in-Charge. |
| 15 | M&L for rendering 10 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces to receive tiles complete all as specified and directed by Engr-in-Charge. |
| 16 | S&F in repair Vitreous china squatting pan ‘Orissa’ pattern, of size 580 x 440 mm, coloured, with integral foot rests, including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete all as specified and directed by Engr-in-Charge. |
| 17 | S&F in repair vitrious china bowl urinal flat back, size 365x335x670 mm ivory with sensor based electronic flushing cistern, flush pipe, grating and union for discharge pipe complete all as specified and directed by Engr-in-Charge. Make : CERA Cat part No. S4020107 or its equivalant as specified. |
| 18 | S&F in repairs 10 ltrs capacity PVC Low level flushing cistern valveless syphonic action type with inlet, ball valve, float and handle including PVC flush pipe 32 mm dia bend complete all as specified and directed by Engr-in-Charge. |
| 19 | S&F in repairs for vitreous china ware Wash Hand Basin, white, flat back of size 550 x 400 mm including brackets, cutting for and pinning in ends of brackets or erecting stand including brass CP union/waste fitting of 32mm dia and discharge pipe of 32mm dia PVC of 1.0 m length with all fittings etc complete all as specified and directed by Engr-in-Charge. |
| 20 | S&F in repair looking mirror of size 600x450mm, bevelled edges of selected quality glass, mounted on 6mm thick commercial ply or AC plain building board with aluminium frame around and fixed to wooden plugs with CP brass screws etc complete all as specified and directed by Engr-in-Charge. |
| 21 | S&F in repairs brass chromium plated shower rose of size 125 mm with arms including fixing to steel pipe complete all as specified and directed by Engr-in-Charge. |
| 22 | S&F in repairs corner sheet glass shelf assemble consisting of 5.5mm thick sheet glass shelf with chromium plated bracket guard and railing complete all as specified and directed by Engineer-in-Charge. |
| 23 | S&F in repairs 15 mm bib tap, brass chromium plated fancy type (quarter turn), long body screwed down including necessary extention piece complete all as specified and directed by Engr-in-Charge. |
| 24 | S&F in repair15 mm dia brass chromium plated angle valve fancy type (quarter turn), screwed at ends including necessary extention piece and fixed complete all as specified and directed by Engr-in-Charge. |
| 25 | S&F in repairs Good quality Connecton pipe (PVC) 450 /600 mm complete all as specified and directed by Engr-in-Charge. |
| 26 | S&Fin repairs pillar taps 15 mm, 2 bore CP with capstan heads, screwed down high pressure, for iron pipe and fixed complete all as specified and directed by Engr-in-Charge. |
| 27 | S&Fin repairs chromium plated grating 100mm dia including fixing with 1:4C:M to floor/nahani traps etc. complete all as specified and directed by Engr-in-Charge. |
| 28 | S&F in repairstubular towel rail of brass chromium plated, 20mm dia, D type, 60 cm long between flanges complete all as specified and directed by Engr-in-Charge. |
| 29 | S&F in repairs Soap dish, CP 125mm size fixed to plugs with chromium plated brass screws complete all as specified and directed by Engr-in-Charge. |
| 30 | Demolition of cement concrete in floors of any description and removing the rubbish out side the MoD land complete all as specified and directed by Engr-in-Charge. |
| 31 | M&L for 25 mm thick PCC 1:2:4 using 20 mm graded stone aggregate over 250 thick lime concrete type E2 ( 1:3 ) with 40mm brick bats as in filling of sunken floors over a layer of polyethylene film black 50 micron over a layer of bitumen blown any grade applied hot (1.5 Kg/sqm) over 10mm thick plaster in cm 1:3 with WPC @2% by wt. of cement including treatment to side wall of sunken complete all as specified and directed by Engr-in-Charge. Note Over all floor area only be measured for payment, rate for side wall deemed to be included. |
| 32 | Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) and removing the rubbish out side the MoD land complete all as specified and directed by Engr-in-Charge. |
| 33 | M&L for Cement concrete 1:3:6 type C1 using 20mm graded stone aggregate in plinth protection, 75mm thick, finished fair and even without using extra cement complete all as specified and directed by Engr-in-Charge. |
| 34 | M&L for Hardcore with Broken stone or boulders of gauge n exe 63 mmdeposited,spread and levelled in layers n exc.15cm thick, watered and rolled/rammed to a true surface complete all as specified and directed by Engr-in-Charge. |
| 35 | M&L for 100mm thick Cement concrete type C- 2, 1:3:6 (40mm graded aggregate) as in sub base complete all as specified and directed by Engr-in-Charge. |
| 36 | M&L for cement concrete type B-1, 1:2:4 using 20mm graded stone aggregate as in coping including weathering slightly rounded or chamfered angles and throating as directed including necessary formwork complete all as specified and directed by Engr-in-Charge. |
| 37 | Taking down (Door) chowkats or frames with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and directed by Engr-in-Charge. |
| 38 | Taking down shutter of any description exc 1.00 sqm but n.exc 2.00 sqm each complete all as specified and directed by Engr-in-Charge. |
| 39 | Taking down (Door) chowkats or frames with shutters exceeding 1.5 Sqm but not exceeding 4.00 Sqm each (without taking off shutters from the frames) complete all as specified and directed by Engr-in-Charge. |
| 40 | S&F Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed by Engr-in-Charge. |
| 41 | M&L for Cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregate as in back filling, holdfasts etc. complete all as specified and directed by Engr-in-Charge. |
| 42 | S&F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by Engr-in-Charge. |
| 43 | S&F 35 mm thick Factory made 2nd class hardwood plain,framed paneled shutters(any numbe of panels) with lock rail and panel of 9mm BWP commercial ply with commercial veneering on both faces size of rail and stile as per IS-1003(part) Kiln seasoned and chemically pressure treated complete all as specified and directed by Engr-in-Charge. |
| 44 | S&F 35 mm thick factory made 2nd class Hard wood glazed and Skelton shutters (three panels) open rebated and prepared to receive and including glass/gauge , wiremesh etc divided into squaresedges of framing Plain, chamfered or rounded mitered and rebated sashbar any numberwith cut or mitered beads for securing glass/gauge etc Size of members of shutters complete all as specified and directed by Engr-in-Charge. |
| 45 | M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cms width or girth and apply two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-Charge. |
| 46 | S&F factory made solid PVC chowkhat/ door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet and edges will be painted to match with printed PVC sheet reinforced with 19mm x 19mm MS square tube of 19 gauge including rubber gasket, PVC fastners, screws, brackets, and shown on drawing as per SSR part-II (2020) complete all as specified and directed by Engr-in-Charge. |
| 47 | S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick wood grain printed moulded prelam PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed by Engr-in-Charge. |
| 48 | M&L for Refixing of shutters of size exc 1.00 sqm but n exc 2 sqm in same or other opening including all necessary adjustments to fit the shutter with frame like easing of shutter for easy closing/opening, tightning of hinges or changing the position of hinges adjustments of tower bolts, Sliding bolts etc complete all as specified and directed by Engr-in-Charge. |
| 49 | S&F in repair Steel window with side hunge shutters incl projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded with one shop coat of red oxide primer, and two coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge. |
| 50 | S&F in repair Steel window with side hunge shutters incl projecting type hinges with steel handle and steel peg stay complete without glazing bars dovetailed or welded with one shop coat of red oxide primer, and two coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge. |
| 51 | S&F in repair for Steel window or ventilator fixed type with glazing bars complete all as specified and directed by Engr-in-Charge. |
| 52 | Dismantling wrought iron or mild steel/cast iron work of any description (steel window & Grill)complete all as specified and directed by Engr-in-Charge. |
| 53 | M&L for Mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, welded or forged into spikes, framed guard bars, window frames, barred iron doors, ladders,framed balusters,walk ways, railings, framework of water tanks and similar work fixed in position including holdfasts or screws confirming to Fe.290.Gde-E-165 complete all as specified and directed by Engr-in-Charge. |
| 54 | M&L for preparation of new Steel surfaces of any description not otherwise described over 10 cms width or girth and apply two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer complete all as specified and directed by Engr-in-Charge. |
| 55 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of perature 1.40mm and fixed with galvanised steel wire staples in door/windows and similar work complete all as specified and directed by Engr-in-Charge. |
| 56 | S&F in repair for mild steel, 300 mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engr-in-Charge. |
| 57 | S&F Sheet glass ordinary quality & glazing with oil putty in square n-exc. 0.5 sqm in each pane 3mm thick complete all as specified and directed by Engr-in-Charge. |
| 58 | Welding in repairs exc 2.5cm but n exc 5cm in length thickness of metal be welded exc 6mm but n.exc. 9mm complete all as specified and directed by Engr-in-Charge. |
| 59 | M&L for preparation of old wooden surfaces of any description not otherwise described over 10 cms width or girth and apply one coats of synthetic enamel paintcomplete all as specified and directed by Engr-in-Charge. |
| 60 | M&L for preparation of old Steelsurfaces of any description not otherwise described over 10 cms width or girth and apply one coats of synthetic enamel paint complete all as specified and directed by Engr-in-Charge. |
| 61 | S&F stainless steel butt hinges, size 100 mm complete all as specified and directed by Engr-in-Charge. |
| 62 | S&F stainless steelAISI 304 grade barrel tower bolt 200mm long, extruded section, etc. complete all as specified and directed by Engr-in-Charge. |
| 63 | S&F stainless steel AISI 304 grade handle of size 200mm long, etc. complete all as specified and directed by Engr-in-Charge. |
| 64 | S&F Stainless steel of AE SI 304 Grade, sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed by Engr-in-Charge. |
| 65 | S&F Floor door stopper (double leg) of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor; overall length of cover plate 60mm complete all as specified and directed by Engr-in-Charge. |
| 66 | S&F in repair 25 mm diaSS curtain rod, with fixingbrackets, side knobsof good quality as approved complete all as specified and directed by Engr-in-Charge. |
| 67 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed by Engr-in-Charge. |
| 68 | M&L for 18 mm thick wood plastic composites (WPC) board, 100% solid with density not less than 650 Kg per cubic meter, one side wood grain finished laminated for exposed/external surface, fixed with screws fitted under or above the kitchen cooking platform and/or other platform including all necessary fittings and fixtures like nickle plated clip hinges, knobs, channels etc complete all as specified and directed by Engr-in-Charge. Note : (a) Pattern & design of WPC board to be decided by Engr-in-Charge. |
| 69 | S&F15mm mild steel, chromium platedrod with fixing brackets, fixed in cupboardsfor hanging cloth of adequate strength complete all as specified and directed by Engr-in-Charge. |
| 70 | Taking up or down 15 mm bore steel tubing and connections complete all as specified and directed by Engr-in-Charge. |
| 71 | All as per Srl item No. 70 above but 20 mm bore complete. |
| 72 | All as per Srl item No. 70 above but 25 mm bore complete. |
| 73 | M&L for GI tubing, 15mm bore `medium grade`with all fittings (such as tee, bend, elbows, short pieces, plugs and unions etc) and fixed completeto walls and ceilings or laid in floors etc complete all as specified and directed by Engineer-in-Charge. |
| 74 | M&L for GI tubing, 20mm bore `medium grade`with all fittings (such as tee, bend, elbows, short pieces, plugs and unions etc)and fixed completeto walls and ceilings or laid in floors etc complete all as specified and directed by Engineer-in-Charge. |
| 75 | M&L for GI tubing, 25mm bore `medium grade`with all fittings (such as tee, bend, elbows, short pieces, plugs and unions etc)and fixed completeto walls and ceilings or laid in floors etc complete all as specified and directed by Engineer-in-Charge. |
| 76 | Cutting chases or making holes, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; andcutting chases for concealed watertubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed by Engr-in-Charge. |
| 77 | Dismantling water tanks of capacity exceeding 500 litres but not exceeding 1000 litres complete all as specified and directed by Engr-in-Charge. |
| 78 | S&F 1000 ltr capacity rotational moulded triple layered polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I (2009) complete all as specified and directed by Engr-in-Charge. |
| 79 | S&F in repairs Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 20 mm bore complete all as specified and directed by Engr-in-Charge. |
| 80 | S&F in repair 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe (minimum weight 210 gms) complete all as specified and directed by Engr-in-Charge. |
| 81 | Dismantling of cast iron or reinforced concrete drains pipes , jointed in cement morter and taking out of trenches if required up to 100 mm internal dia of drains complete all as specified and directed by Engr-in-Charge. |
| 82 | Taking down eaves gutters and rain water pipes (any size, material or pattern), with all fittings, heads, shoes, bends,swann necks, etc including taking out of trenches if required for cleaning or refixing or removal to store complete all as specified and directed by Engr-in-Charge. |
| 83 | S&F 110 mm UPVC pipes Type "B" (for waste water), single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to walls complete all as specified and directed by Engr-in-Charge. |
| 84 | S&F 110 mm UPVC pipes Type "A" (for rain water), single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed by Engr-in-Charge. |
| 85 | S&F 110 mm UPVC (SWR) Bends/Tees/Tapers (any radius), with or without oval access door as required complete all as specified and directed by Engr-in-Charge. |
| 86 | S&F 110 mm UPVC (SWR) branch piece, any length, single (single Y) equal or unequal provided with oval access doors complete all as specified and directed by Engr-in-Charge. |
| 87 | S&F Stack clamps out of 50mm x 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, for any bore and any type of pipes complete all as specified and directed by Engr-in-Charge. |
| 88 | Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etcincluding removal of debrish from the MOD land complete all as specified and directed by Engr-in-Charge. |
| 89 | M&L for 15mm thick rendering with redimix plaster (as per manufacturer"s instruction) on fair faces of brick work or concrete surfaces finished even and smooth surface without using extra on wall up to four stories bldg. make of ready mix plaster: Birla Aerocon/Ultratech radiplast/ACC acoplast complete all as specified and directed by Engr-in-Charge. Make of ready mix plaster : Birla Aerocon/Ultratech radiplast/ACC acoplast. |
| 90 | M&L for 10mm thick rendering with redimix plaster (as per manufacturer"s instruction) on fair faces of brick work or concrete surfaces finished even and smooth surface without using extra on ceiling, chajja etc.up to four stories bldg. make of ready mix plaster: Birla Aerocon/Ultratech radiplast/ACC acoplast complete all as specified and directed by Engr-in-Charge. Make of ready mix plaster : Birla Aerocon/Ultratech radiplast/ACC acoplast. Notes for Srl item No. 89 & 90 :- 1. Make of readymix plaster shall be Birla Aerocon/Ultratech readiplast/ACC Accoplast/Fosroc Chemical (India) Pvt Ltd Renderoc and as approved by GE) 2. The readymix plaster shall be procured directly from the manufacturer or their authorised dealer. 3 The contractor shall produced original purchase voucher alongwith test certificate of readymix plaster while claiming RAR/ Final Bill. 4. The Engr-in-Charge shall verify the genuiness of these vouchers before endorcing the purchase vouchers. |
| 91 | M&L for preparaing newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed by Engr-in-Charge. |
| 92 | M&L for Preparing new plastered or unplastered surfaces of wall and applying two coats of distemper oil emulsion, white or tinted over & including a coat of 3 mm thick wall carePutty complete all as specified and directed by Engr-in-Charge. |
| 93 | M&L for preparation of newly plastered surface of wall and applying two coats of cement base paint over a coat of primer including scaffolding arrangement, trestles, ladders etc complete all as specified and directed by Engr-in-Charge. |
| 94 | M&L for Complete removal of existing treatment and applying two coats ofcement base paint over a coat of primer as per manufacturer instruction including scaffolding arrangement, trestles, ladders etc complete all as specified and directed by Engr-in-Charge. |
| 95 | Complete removal of existing treatment of plastered or unplastered old surfaces of wall and applying two coats of oil emulsion distemper, white or tinted over a coat of 3 mm thick wall care putty complete all as specified and directed by Engr-in-Charge. |
| 96 | Complete removal of existing treatment on surfaces of ceiling and applying three coats of white wash complete all as specified and directed by Engr-in-Charge. |
| 97 | Surface dressing n exc 15 cm deep hard/dence soil complete all as specified and directed by Engr-in-Charge. |
| 98 | M&L Cement concrete (1:4:8) Type D2, (40 mm graded stone aggregate), 100 mm thick, as sub-base and similar works complete all as specified and directed by Engr-in-Charge. |
| 99 | M&L Chequered cement concrete tiles 20cmX20cmX 25mm thick, with grey cement and no pigment, set, jointed and pointed in neat cement slurry in floors,laid over15mm thick screed bed in cement mortar (1:4) complete all as specified and directed by Engr-in-Charge. |
| 100 | Excavating in post holes (or similar holes) each n.exc 0.50 cum getting out returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm watering and removing surplus soil n.exc 50m and making good the surface in any type of soil complete all as specified and directed by Engr-in-Charge. |
| 101 | M&L for Cement concrete 1:3:6 type C2 (using 40mm graded aggregate) as in foundations, filling and mass concrete complete all as specified and directed by Engr-in-Charge. |
| 102 | Fixing only chain link fencing including line wires, any mesh size and type of standards, rails, straining bolts etc including provision of binding wire complete all as specified and directed by Engr-in-Charge. |
| 103 | Supply only MS galvanished chain link fencing with 3 mm dia and size 50 mm x 50 mmincluding line wires, strain bolts, binding wire etc complete all as specified and directed by Engr-in-Charge. |
| 104 | S&F mild steel screw bolts (machine made) with hexagonal head at one end and screwed the other or screwed both ends each screwed and to be fitted with washers and with hexagonal nut of exc 5 cm length with dia of shanis 11to 15 mm etc complete all as specified and directed by Engr-in-Charge. |
| 105 | S&F mild steel work such as in fencing post, tie bars etc including embedding into concrete and making holes for screwing of nut, bolts, cutting top to shape as directed, drilling holes, notching for wire etc confirming Fe 410-0 or Fe 310-0 complete all as specified and directed by Engr-in-Charge. |
| 106 | M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed by Engr-in-Charge. |
| 107 | Cutting holes in brick walls in built in cement mortar or cement lime mortar exc half brick but not exc one brick complete alll as specified and directed by Engr-in-Charge. |
| 108 | M&L steel work in tubuler trusses including special shaped washer, cleats etc complete using ERW or induction butt welded tubes confirming to IS: 1161-1979 grade st - 240 complete alll as specified and directed by Engr-in-Charge. |
| 109 | M&L for preparing of New unpainted surfacepipes any description, n.exc 60 cm girth including holderbats, distance pieces, etc. (length measured over bends, branches etc.) and apply two coats of synthetic enamel paint over priming ofred oxide,zinc chrome complete alll as specified and directed by Engr-in-Charge. |
| 110 | Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete alll as specified and directed by Engr-in-Charge. |
| 111 | M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade laid over 30mm thk sand cushion complete all as specified and directed by Engr-in-Charge. |
| 112 | Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed by Engr-in-Charge. |
| 113 | Taking down carefully the old U/S Aluminium / Copper point wiring (light, fan, socket or power) complete fitting such as switches, ceiling roses, pendants, sockets, regulators, etcand making good disturbed surfaces of walls including necessary touch up with the adjoining surface of disturbed area ie with OBD/colour wash/white wash as the existing finish complete all as specified and directed by Engr-in-Charge. |
| 114 | M&L for point wiring complete, stranded copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable in but with through existing concealed PVC/ MS conduit and including replacement of unserviceable pressed steel terminal boxes of required size with top cover 3 mm thick plastic/laminated sheet of required color with screwed and cup washer with all accessories including 1.5 sqmmstranded copper conductor PVC unsheathed cable earth wire to common earth and connected to earth dolly complete all as specified for One light/Fan point controlled by one switch 5 Amps one way using cable (1.5 Sq mm for phase and neutral and 1.5 sqmm for earthing) and making good to disturbed surface of walls including necessary touch up with thw adjoining surface of disturbed area i.e with OBD/colour work/white wash as existing finishes complete all as specified and directed by Engr-in-Charge. Note :- In existing conduit wiring new conduit will be added where there is a burnt/blokage/damage to the existing conduit and incl cutting /chashing for new point wiring including bends/elbows/tees/Junction boxes. |
| 115 | All as per item No.114 above but One 3 pin socket outlet, 5/6 Amps, independent, with cables 1.5 sq. mm size with through existing concealed PVC/MS conduit complete. |
| 116 | All as per item No.114 above but 5 Amp socket outlet on same board complete. |
| 117 | All as Item No.114 above but for one socket outlet 5/15 Amps on Independent board with cables 2.5 sqmm size for phase and neutral and 2.5 Sqmm for earthing with through existing concealed PVC/MS conduit complete. |
| 118 | All as Item No.114 above but for onelight point controlled by two 2-way switches with cable 1.5 Sqmm size complete. |
| 119 | S&Fswitch piano flush type 5/6 Amps SP one way complete all as specified and directed by Engr-in-Charge. |
| 120 | S&Fsocket outlet 2-in-1, 5/6 Amps flush mounted 5 pin multi purpose complete all as specified and directed by Engr-in-Charge. |
| 121 | S&Fswitch piano type 15/16 Amps SP one way all as specified. |
| 122 | S&Funiversal socket outlet 2-in-1 (multipurpose) 5pin 6/16 Amps flush mounted type complete all as specified and directed by Engr-in-Charge. |
| 123 | S&Fceilingrose surface Bakelite 65x25 mm two to three terminalscomplete all as specified and directed by Engr-in-Charge. |
| 124 | S&F0-4 step type electronic regulators for ceiling fan 1200mm sweep, 240V complete all as specified and directed by Engr-in-Charge. |
| 125 | S&Fswitch piano flush type 5/6 Amps SP 2 way complete all as specified and directed by Engr-in-Charge. |
| 126 | S&F in replacement Decorative wall light mounting suitable for LED Lamp upto 15 Watt complete with all connections complete all as specified and directed by Engr-in-Charge. . |
| 127 | S&F in replacement Wall mounted LED Integrated Batten 20 Watt - 4Ft White, indoor decorative PVC extruded LED battern complete all as specified and directed by Engr-in-Charge. |
| 128 | S&F LED bulk head in engineering plastic housing with clear prismatic diffuser, 10W WHITE in replacement of old unsv bulk head fitting including all accessories connecting up twin core flexible copper conductor cable complete all as specified and directed by Engr-in-Charge. |
| 129 | S&F in replacement Wall mounted LED Integrated Batten 10 Watt-2 Ft White, indoor decorativePVC extrudedLED batten complete all as specified and directed by Engr-in-Charge. |
| 130 | S&F LED RETROFIT Lamp of 12 Watt for fixing in batten holder/wall mounting point complete all as specified and directed by Engr-in-Charge. |
| 131 | S&F in replacement of building security light fitting 30W LED 5000K new Powder coated pressure die cast aluminium compact LED Street light suitable for pole dia 40 mm of bracket duly fixed with clamps, nut, bolts & washers etc complete all as specified and directed by Engr-in-Charge. |
| 132 | S&F in replacement exhaust fan 450 mm sweep, copper wound (metal body) of color metalic grey complete with metal louvers and all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size and including making/boring hole into the wall as suitable size of exhaust fan to fix in hole of wall with hole fasner of nut & bolts and to carrying out necessary civil work i.e. plaster to disturbed surface out side and inside the wall and painting/distempering as it is to match the existing colour complete all as specified and directed by Engr-in-Charge. Note-old unsv exhaust fan to be deposited in AGE E/M store. |
| 133 | S&F BLDC (Brushless Direct Current) Ceiling Fan 1200 mm Sweep, operated through regulator, not less than 350 RPM having air delivery 215Cum, high air flow with silence operation, with fully copper winded motor & ribbed 3 Nos A/M blades. The BLDCmotor fan shall have 100% rust free blades.The fan shall be BEE 5 Star rating and compliant with IS 374 and making necessary electric connection of suitable PVC copper wire from ceiling rose to ceiling fan complete all as specified and directed by Engr in charge including taking down old ceiling fan and depositing to MES store yard. |
| 134 | S&F in replacement of VTPN DB 4 way double door, vertical type for fixing MCCB up to 125 Amps asincommer andMCBs as out goings with metel door, IP 43 Protectionsand connecting complete all as specified and directed by Engr-in-Charge. |
| 135 | S&F MCCB 100 Amp3 pole and neutral, 415 v, 16kA in replacement old unsv isolator any type complete all as specified and directed by Engr-in-Charge. |
| 136 | S&F in replacement MCB SP 40 Amps "C" series, breaking capacity 10 Ka, "C" curve 240 volts, 50 Hz including necessary incoming and out going electric connection with suitable size of copper lugs etc. complete all as specified and directed by Engr-in-Charge. |
| 137 | S&F in replacement MCB DB SPN 12 Way double door type, (IP 43 Protection) flush mounting for MCBs. complete all as specified and directed by Engr-in-Charge. |
| 138 | S&F in replacement MCB DB SPN 4 Way double door type, (IP 43 Protection) flush mounting for MCBs complete all as specified and directed by Engr-in-Charge. |
| 139 | S&F in replacement for MCB SP 10 to 32 Amps 240 Volts, 10 KA, `C" curve, all as per site requirement and complete all as specified and directed by Engr-in-Charge. |
| 140 | S&F in replacement for MCB SPN 32Amps, 240 Volts, 10 KA, `C" curve, all as per site requirement complete all as specified and directed by Engr-in-Charge. |
| 141 | M&L for submain wiringin replacement PVC insulated FRLS single core with stranded copper cable of size 6 Sqmm in 2 runs and 6 Sqmm one run for earthdrawing through existing PVC concealed conduit 25 mm dia conduit complete all as specified and directed by Engr-in-Charge. Note:- (a) Two runs of main cable and one run of earth cable all-together shall be considered as one length. (b) New conduit of suitable size with connected fitting will be laid if there is a damage/blockage in existing conduit including making good to disturb surfaces with CM 1:3, same surface finished with the adjoining surface of disturbed area and the rates are inclusive of quoted rates. |
| 142 | M&L for Earthing complete withgalvanized steel earth plate 600x600x6mm thick, buried directly in ground(earth pit not less than 2.25 m deep below ground level) with top edge of the plate n.less than 1.5 m belownormal groundlevel, connected to galvanized iron wire 4 mm as earthing lead by means of bolts, nuts, check nuts & washers of galvanized iron or steel besides building at all joints as shown in drgs and including excavation and earth work, GI pipe light grade 25mm bore of protection of GI wirefrom earth electrode, supply and laying charcoaldust, common salt, PCC (1:2:4)type B-1 Chamber and MS angle iron frame 40x40x3mm and RCC cover 40 mm thick (1:2:4)type B-1using 20 mm graded stone aggregate Reinforced with 6 mm dia round bars@75 mm C/C both ways with MS handle 12 mm dia , PGI funnel and wire mesh , 20 mm dia GI Pipe light grade for wateringcomplete all asshown in drg and connected to earth test point including testing complete all as specified and directed by Engr-in-Charge. |
| 143 | Notes for BoQ:- The contract sum shall be after deducting the amount of Credit shown in Credit Schedule of this Tender. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
