Improvement Of Water Supply By Replacement Of Defective Electrical And Mechanical Equipments At Choti Baradari, Anaz Mandi And Tikona Park Tube Wells- The Submersible Pump Set Taken Out From The Bore Due To The Defective G.I. Pipe And Dismantling The De, Delhi-Delhi
TDR : 33381527
Tender Notice
BOQ
Expired
Delhi
Delhi
Improvement Of Water Supply By Replacement Of Defective Electrical And Mechanical Equipments At Choti Baradari, Anaz Mandi And Tikona Park Tube Wells- The Submersible Pump Set Taken Out From The Bore Due To The Defective G.I. Pipe And Dismantling The De
Name of Work:Improvement of water supply by replacement of defective electrical and mechanical equipments at Choti Baradari, Anaz Mandi and Tikona Park tube wells
Sl. No.
Item Description
1
The submersible pump set taken out from the bore due to the defective G.I. pipe and dismantling the defective electrical items from the LT panel board.
2
Supply of Hut Type Feeder Piller Automatic LT Panel board having suitable space for electric energy meter for 415 Volts , 3 phase , 50 Hz , 4 wire system for operation ofup to15 HP submersible set, made out of not less than 2mm thick CRCA for load bearing members, and 1.6 mm for doors of panel, totally enclosed , dust and verminproof , floor mounted type .The panel size 760mmX1360X300mm and having 1) 63 Amp 4 pole MCB 10 KA breaking capacity -1 no. (2) digital volt meter(0-400) - 1 no.(3) digital Ammeter (0-50A) - 1 no. (4) Phase sequence relay -1 No (5) Electronic timer - 1 no (6) Voltmeter Selector Switch -1 no (7) Auto Manual Selector Switch - 1 No (8) Start/Stop Push Button - 2 No (9) 32 Amp Contactor - 2 No (10) Auto/manual switch, 2-position selector-switch,centre\"OFF\" with NO+ NC Block Make:- L&T/C&S/minilac (11) Set of indicating lamps, LED-Type, operational-voltage up tp 240 V (3 No) (12) Time-Switch digital - (1 No) (13) Motor Protection Relay - 1 No (14) Aluminum Bus bar size 25 mmX6mm-1 set. (15)CT-3Nos (16) Over load Relay 14-23 Amps. 1 No (17) QT Timer -24 Hours -1 No Make of accessories:-L&T/C&S/AE/as per DJB approved
3
S/O submersible cable with copper conductor having three core sizes 4 sqmm 1100v (100m roll) Make :Havells/Gloster/Universal or any other make approved by DJB.
4
S/o G.I. pipe 50 mm dia size medium class with G.I.flange welded in both sides 03 mtrs long with MS strips complete with threading work on each side of pipe each flange should be 4 holes and cut for cables make :- Jindal/Tata / or any other make approved by DJB
5
S/o G.I. tail piece 50 mm dia size medium class 1.5 mtr long complete with one end threaded and one end welded with flange make Make :- Jindal/Tata or any other make DJB approved
6
S/o MS clamp 50 mm dia 600 mm long and 12 mm thick holding the pipe the complete with nut bolt and washer
7
S/o rubber insertion jointing sheet conforming IS 638/79 with ISI mark 1.5 mm thick Make:- Jyoti or any other make approved by DJB
8
S/o required off size threaded nut bolts of good quality
9
Supply of MS bore cover 8 mm thick suitable for 200 mm dia casing in 2 pieces complete with bolting arrangement angle iron frame and provision of 50 mm dia hole in the center
10
Installation of E & M equipments lowering pump set in the bore and accessories executing minor civil work making electrical connection with cable as required size i/c watch and ward cartage, taking all safety measures all tools and tackles testing and commissioning of all E&M equipments at no load and full load conditions as per standard and full satisfaction of Engineer –in Charge.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
