Military Engineer Services-MES has published Repair To Flooring Plastering Joinery Roofing And Concrete Work Etc At Em Installation Under Itr Chandipur . Submission Date for this Tender is 22-08-2022. Shed Construction Tenders in chandipur Odisha. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 12-Aug-2022 | Corrigendum No. 01 | Date | 22-08-2022 |
| Sl. No. | Item Description |
| 1 | NOTE (Applicable for all items) :- The bidders/contractorsare advised to read tender document & all corrigendum / amendments and General conditions of contracts before entrying/quoting the rates. |
| 2 | Demolition of cement concrete of any description in any position not otherwise specific provided for. |
| 3 | Dismantling floor hearth or wall tiling including cement mortor bedding (but not backing) and rubbish off the premisses. |
| 4 | Roughening surfaces of old concrete floors/slabs by picking, seaping cleaning and washing down with water to remove dust, brushing neat cement slurry with 3.0 Kg of cement per Sqm. |
| 5 | M&L PCC 1:2:4 type B0 using 12.5mm stone aggregate as in padding and in any situation finishing even and fair avg thickness 40 mm. Concrete for getting proper slope/covering as specified (PCC shall be done by Mixer machine only). |
| 6 | M&L for rendering 10 mm thick avg in cement mortar 1:4 over roof surfaces mixed with WPC as per manufactures instructions, finished even and smooth without using extra cement after preparation of surfaces complete. |
| 7 | M&L APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3 mm thick reinforced with polyster non woven fabric(wt not less than 150 gms/sqm over a coat of bitumen primer @ 0.5 ltr/sqm and bonded completely with torck application with side over lap 75 mm and end lap minimum 100 mm and sealing over lap and joints as per manufacturer"s instructions. |
| 8 | Supply only Liquid water proofing compound |
| 9 | Taking down eaves gutters and rainwater pipes(any size), including all fittings, heads, shoes, bends, swan-necks, etc |
| 10 | S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls. |
| 11 | S&F PVC (SWR) bends any radious bore in dia 110mm |
| 12 | Demolition of RCC in chajja, fins,facia, column edges including cutting reinforcement etc..all as specified and as directed . |
| 13 | M&L for RCC (nominal mix) in type B1 1:2:4 (using 20mm graded stone aggregate) including chajja,fins,facia, parapets etc all as specified and as directed. |
| 14 | M&L for drip mould 40 mm x 10 mm and similar work not exc 15 cm width for RCC chajjas ,facia etc |
| 15 | M&L fair finished flat form work to RCC chajjas, fins facia,parapets and similar items including edges for fair finished surface ofconcrete. |
| 16 | Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar incl aii quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles. |
| 17 | M&L Brick work in cement mortar 1:6 , with subclass "B" bricks, straight or curved in plan exceeding 6 m mean radius. |
| 18 | M&L brick with sub class "B" brick, straight or curved on plan to any radius in half brick wall built in CM (1:4) |
| 19 | M&L Cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in copings,bed plates, kerbs,and the like including all as specified and directed . |
| 20 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for |
| 21 | S&F TMT bars (Fe 500 D) 10mm dia and over, cut to length, bent to shape required, including cranking, bending, spirally fo hooping fo hooping for columns,inclmild steel wire annealed not less than 0.9 mm dia o securing with clips. |
| 22 | M&L Providing reinforced precast cement concrete 1:2:4 type B1 20mm graded stone aggregate as in landings, cover slab, shelves , duct cover and similar work incl necessary formwork , set in cement mortor 1:6. |
| 23 | Taking down cement plaster of any description incl raking out joints, hacking for key, scrubbing down with water etc. |
| 24 | M&L 15mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement on walls |
| 25 | M & L for rendering 5 mm thick in CM I:3on ceiling finished even and smooth without using extra cement etc complete. |
| 26 | M & L for Rendering 15mm thick cement plaster in two layers, 1st layer 10mm thick and 2nd layer 5mm thickin CM 1:4 using WPCas per manufactur"s instructions finished even and smooth without usingextra cement(WPC will be measured and paid separately) |
| 27 | M/L Preparation of new plastered surfaces and applying three coats of white wash on walls. |
| 28 | M&L for twocoats of white wash overold decorated surfaceof interiorwall including preparationof wallsurfaces and finishcomplete as directed. |
| 29 | M&L for threecoats of white wash including preparationof newly plastered ceilingsurfaces complete as directed. |
| 30 | M&L for twocoats of white wash overold decorated surfaceof interiorceling including preparationof ceilingsurfaces and finishcomplete. |
| 31 | M&L Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm). |
| 32 | M&L for applying one coat of acrylic weather coat premium quality antifungal exterior emulsion to old painted surface of wall including preparation all as specified and directed |
| 33 | M&L for applying two coat of acrylic weather coat premium quality antifungal exterior emulsion to old painted surface of wall including preparation all as specified and directed |
| 34 | M&L for two coats of oil bound distemper over chalk whitening in newly plastered surfaces of walls of any description including preparation of surfaces all as specified and as directed. |
| 35 | M&L 75mm thick PCC 1:3:6, Type C1(using 20mm graded stone aggregate) finished even and smooth without using extra cement as in foot path, plinth protection, etc |
| 36 | M&L 100 mm thick, Cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate), as in sub base. |
| 37 | M&L 75 mm thick, Cement concrete 1:2:4,type B2 using 40 mm graded stone aggregate as in pavings, hardstandings and similar work . |
| 38 | M&L 40 mm thick, Cement concrete 1:2:4,type B1 using 20 mm graded stone aggregate as in pavings,and similar work finishing cement concrete surface even and smooth without using extra cement. |
| 39 | M & L for 15 mm thick screed bed or bedding layer of mortar in CM 1:4 for laying floor finishes complete all as specified and directed. |
| 40 | M&L Prepolished pavement heavy dutydesigner tilesof size 300x300x (8-10) mm thick jointed and pointed in neat cement slurry infoot path complete all as specified.. |
| 41 | Taking down chowkhats or frames with shutters ( without taking off shutters from frame) area exceeding 1.5 Sqm andnot exc 4 sqm each. Including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs,walls for taking out hold fast shall be finished identical to existingfinish without any extra cost to govt). complete all as directed by engineer in charge. |
| 42 | Taking down chowkhats or frames with shutters ( without taking off shutters from frame) area not exceeding 1.5 Sqm each. Including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs,walls for taking out hold fast shall be finished identical to existingfinish without any extra cost to govt). complete all as directed by engineer in charge. |
| 43 | Taking down shutters of any description not exc 1 sqm each all as directed |
| 44 | Taking down shutters of any description exceeding 1 Sqm andnot exc 2 sqm each each all as directed. |
| 45 | Refixing shutters of any description not exc 1 sqm as same opening each all as directed. |
| 46 | Refixing shutters of any description exc 1 sqm and n exc 2 sqm each as same opening each all as directed. |
| 47 | S&F 2nd class hardwood plain,solid straight chowkats and frames, wrought ,framed rebated on the solid rounded or chamfered , put together with glue pinned at joints. |
| 48 | S&F 35mm thick factory made 2nd class hard wood shutters plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P.commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS"1003 (Part-I) kiln seasoned and chemically presure treated. |
| 49 | S&F30mm thick 2nd class hard wood factory made glazed and skelton shutters,open rebated and prepared to receive glass,gauze ,etc (without sash bars),edges of framing plain,chafered or rounded. Fitted with cut and mitred beads for securing glass,etc sizes of members of shutters as specified in SSR Part-I ,section-8,clause 8.24(a), supplied and fitted to chowkats devided into squares,with plain,chamfered or rounded,mitred and rebated sash bars,any numbers. |
| 50 | S&F anodised aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified 2mm thick SP-4871. |
| 51 | S&F aluminium door shutters powder coated, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified. |
| 52 | S&F anodised aluminiumpowder coated windows, ventilators fixed type/ sliding type without sash bar, aluminium section weighting 0.55Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified. |
| 53 | S&F 5 mm thick sheet figured glassand glazing with rubber packing around the glass, in squaresn.exceeding 0.50 sqm in each pane complete all as specified and as directed. |
| 54 | S&F 9 mm thick pre-laminated both side particle board with decorative choice laminations interior grade. |
| 55 | M & L for hacking out old broken glass (any thickness,size, quality or description) from wooden metal/ aluminium frames,including oil puty or removing beadings etc,complete all as directed by Engr-in-Charge |
| 56 | S&F 4mm thicksheet glass,ordinary quality and glazing with oil putty in square not exc 0.50sqm in each pane. |
| 57 | S& F Famed work such as grills, gratings,ladder etc with ends of bars or rivetedframed guard bars barred ironfixed independently in wooden frames conforming to IS 2062 and grade Fe-290 E- 165 complete all as specified. |
| 58 | S & F mild steel articles such as hold fasts mild steel conforming to IS-2062 and grade E-165 (Fe-290), complete all as specified and as directed by Engineer-in-charge. |
| 59 | M&L forsynthetic enamel paint oftwocoat over a coat of primerincl perparation of newwooden surfaces over 10 cm width or girth complete. |
| 60 | M&L forsynthetic enamel paint ofonecoat incl perparation of old wooden surfaces over 10 cm width or girth complete. |
| 61 | M&L forsynthetic enamel paint oftwocoat over a coat of primerincl perparation of newsteel surfaces over 10 cm width or girth complete. |
| 62 | M&L forsynthetic enamel paint ofonecoat incl perparation of oldsteel surfaces over 10 cm width or girth complete. |
| 63 | S& F Butt hinges, of size 100 mm length extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed type B-21 |
| 64 | S& F Butt hinges, of size 75 mm length extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed type C-21 |
| 65 | S& F Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) 300 mm long and fixing clips to sheet cast or extruded sections and fixing bolt or cast aluminium alloy |
| 66 | S&F Aluminium anodised barrel tower bolt of extruded section of size 150 mm long |
| 67 | S&F Aluminium anodised, barrel tower bolts of extruded section of 100 mm long. |
| 68 | S&F 100 mm long aluminium alloy cast type anodised handles |
| 69 | S&F 150 mm longaluminium alloy cast type anodised handles |
| 70 | S&F steel rolling shutters with 1.25mm lathing,with ball bearing, as specified including top cover,anchoring rod, hasp and stable and one shop coat of primer, erected in position as indicated, complete. Push, pull or manual type including safety lever locks mild steel with 4 levers including taking down old shutter complete all as specified and directed by engineer-in-charge. |
| 71 | Taking down MS cover over rolling shutter, removingdust shutter steps, cleaning of shaft, springs, crankshaft,gear aggangement and cleaning of all accessories with lub old and greesing and refixing same position. |
| 72 | S&F collapsible steel gates, top hung,consisting of channel pickets,pivoted flat bars, top and bottom runners, brass handles etc, as specified, erected in position and securing runners with holdfasts and brackets, including taking down of old collapseble gate complete all as specified and directed |
| 73 | Safety lever locks mild steel with 4 levers for rolling shutters |
| 74 | Ball bearingfor rolling shutters |
| 75 | Taking down the existingwrought out wheel, shifting top and bottom rail and removing bends in verticalflaps to collapsible gate including greasing, oiling and refixing in the same position all as specified and directed by the Engr-in-Charge. |
| 76 | Dismantling asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof coverings |
| 77 | Dismantling structural steel work. |
| 78 | M&L for prepainted corrugated galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 79 | S&F steel work in tubular for columns, roof truss, purlins, rafters and battens etc incl special shaped washer etc complete using ERW or induction but welded tube conforming to IS :1161-1979 Gde St-240 completely providing in any curvature and as of any shape etc complete all as specified |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
