Military Engineer Services-MES has published Welcome Maintenance Of Officers Md Accn And Repairs To Flooring, Plastering, Joinery, Glass Panes, Att, Plumbering And Sanitary And Other Misc Works At Old Naval Park And Amzari Park Under Age B / R-I Of Ge ( Nb ) Visakhapatnam. Submission Date for this Tender is 18-08-2022. Building Work Tenders in visakhapatnam Andhra Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | M & L for preparing old decorated surfaces of wall, etc by "Vacuum based sandng machine" including cornces by bromming down or by steel wire brushing, scrapping down smokes soot, moulds, moss and efflorscent salt and treating oil and greasy spot and applying one coat of distemper oil emulsion by "Auto Roller" complete all as specified and directed. |
| 2 | M & L for preparing old decorated surfaces of walls, etc including cornices by bromming down or by steel wire brushing, scrapping down smokes soot, moulds, moss and efflorscent salt and treating oil and greasy spot and applying one coat of white wash complete all as specified and directed. |
| 3 | M & L for preparing old decorated surfaces of ceiling, etc by bromming down or by steel wire brushing, scrapping down smokes soot, moulds, moss and efflorscent salt and treating oil and greasy spot and applying one coat of white wash complete all as specified and directed. |
| 4 | M & L for Preparation of old painted wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 5 | M & L for Preparation of oldpainted steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint complete all as specified and directed. |
| 6 | Material and labour for complete removal of existing treatment from old decorated plastered surfaces of wall by "Vacuum based sandng machine" and applying one or more coats of wall care putty to a smooth surface and applying two coats of distemper oil emulsion over a coat of alkali resistant primer by "Auto Roller"complete all as specified and directed. (Note: Multipurpose mixer shall be used for uniform and proper mixing of putty) |
| 7 | M & L for Preparation of old treated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and making smooth surfaces with sand paper and cleaning and filling with wood filler and applying two coats of synthetic varnish over a coat of wood filler liquid transperant complete all as specified and directed. |
| 8 | M & L for Preparation old plastered surfaces of walls of any description over 10 cm width or girth not otherwise described by "Vaccum based sanding machine" after complete removal of existing treatmentand applying two coats of plastic emulsion paint over a coat of primer by "Aquto Roller" machine over one or more coats of wall care putty to a smooth surface complete all as specified and directed. (Note: Multipurpose mixer shall be used for uniform and proper mixing of putty) |
| 9 | M & L for Preparation of oldpainted steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of aluminium paint complete all as specified and directed. |
| 10 | Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water and removing rubbish to outside MD land complete all as specified and directed |
| 11 | M & L for rendering 5 mm thick in cement mortor 1:3 on concrete surfaces as in ceilings and finishing surfaces even and smooth without using extra cement complete all as specified and directed. |
| 12 | M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished the surfaces even and fair without using extra cement complete all as specified and directed. |
| 13 | M & L for preparing newly plastered surfaces of internal walls, etc by "Vacuum based sandng machine" and applying two coats of distemper oil emulsion over a coat of alkali resistant primer by "Auto Roller" and over one or more coats of wall care putty to a smooth surface complete all as specified and directed. (Note: Multipurpose mixer shall be used for uniform and proper mixing of putty) |
| 14 | M & L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 15 | Taking down chowkats or frame, n.exc 1.5 Sqm each with shutters (without taking off shutter from the frame) complete all as specified and directed. |
| 16 | Taking down chowkats or frames, exc 1.5 but n.exc. 4 Sqm in each with shutter (without taking off shutter from the frame)complete all as specified and directed. |
| 17 | Taking down shutters of any descriptionn. exc 1 Sqm each complete all as specified and directed. |
| 18 | Taking down shutters of any description exc 1 Sqm but n. exc 2 Sqm each complete all as specified and directed. |
| 19 | Taking down shutters of any description exc 2 Sqm each complete all as specified and directed. |
| 20 | S & F Solid PVC factory made solid PVC door frame of size 100 mmx45 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube manufactured as per SSR Part I specifications and drawing complete all as specified and as directed |
| 21 | S & F factory made solid panel PVCflush door shutter 30 mm thick wood free consisting of frame made out of M.S. tubes of 19 gauge of size 20mm x 40mm for stiles, top & bottom rails, M.S. frame shall be metal primed and covered with Prelam 5mm thick heat moulded having a 5mm thick PVC sheet strip stuck inside with solvent cement, forming stiles, and prelam 5mm thick PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panelling shall consists of 20mm thick multichamber hollow PVC section of 1mm wall thickness, bonded using solvent cement/cynoacrylate adhesive with 5mm thick prelam PVC sheet of density 600Kg/cbm on both sides of panel, all four edge of the panel to be sealed with lapping of 10mm (5mm x 2) thick & 20mm wide PVC sheet batten using solvent cementand door edge lipping to be painted with PVc ink of matching colour of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with PVC sheet beading, and joined together with solvent cement adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s instructions and drawing complete as per specification and drawing and as directed. |
| 22 | S & F Well seasoned 2nd class hard wood plain, solid, straight chowkat and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed. |
| 23 | M & L for Plain cement concrete 1:3:6, type C-1, (using 20 mm graded stone aggregate) as in lintel upto 1.5m span, cills and other similar band, plinth course, parapet, railing upto 60cm height, coping, kneelers, bed plates, hold fast block etc including weathering slightly rounded or chamfered angles including necessary form work complete all as specified and directed. |
| 24 | S & F mild steel bands, straps, supports or stays of rain water, ventilating pipes including bolts, hooks (stay) for large gates, hook and pintel hinges, clamps, hold fasts, wall ties, flat iron fillets for securing wire mesh, wind tie, fan hook and similar work including necessary drillingbolting or riveting etc conforming to Fe – 290 Gde E – 165 complete all as specified and as directed. |
| 25 | S & F 35 mm thick, factory made, Second class hardwood, glazed and skeleton shutters open rebated and prepared to receive glass, gauge, etc, divided in to squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, etc complete all as specified and directed. |
| 26 | S & F 30 mm thick, factory made, Second class hardwood, glazed and skeleton shutters open rebated and prepared to receive glass, gauge, etc, divided in to squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, etc complete all as specified. |
| 27 | S & F 35 mm thick, factory made, glazed/skeleton shutters with second class hard wood,open rebated and prepared to receive glass, gauze, etc (without sash bars)edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass, etc complete as specified and directed . Sizes of members of shutters as specified in SSR Part I complete all as specified and directed |
| 28 | S & F 30 mm thick, factory made, Second class hardwood, Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, etc.; sizes of members of shutters as specified in SSR Part I complete all as specified and directed |
| 29 | S & F 30 mm thick, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 30 | S & FStainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplescomplete all as specified and directed. |
| 31 | S & F 100 mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 32 | S & F 75 mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 33 | S & F 100 mm long, Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 34 | S & F 150 mm long, Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 35 | S & F 200 mm long, Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 36 | S & F 125 mm size, Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 37 | S & F 150 mm size, extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 38 | S & F 125 mm, Gate and shutter, hooks and eyes, Aluminium plate type II complete all as specified and directed. |
| 39 | S & F Aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clipes of sheet, cast or extruded sections and fixing bolts of extruded sectionsor cast aluminium alloy, length of bolt of 300 mm complete all as specified and directed. |
| 40 | M & L for Preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and directed. |
| 41 | S & F Powder coated (minimum 50 micron) Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. (Note : (i)Thickness of aluminium section shall not be less than 1.5 mm). |
| 42 | S & F Powder coated (minimum 50 micron) Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. and anodised aluminium fittings such as peg stay 150mm long (01 No), hinge type B-21, 100mm long (02 Nos) and suitable size of handle complete all as specified and directed. |
| 43 | Providing and fixing factory made uPVC white colour Sliding window Three track Area not exceeding 2.00 sqm each made of extruded profiles with wall thickness of 2.3mm (+/-0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead(24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2 (+/-0.2)mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and directed. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.) |
| 44 | Providing and fixing Powder coated Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge complete all as specified and directed. |
| 45 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. |
| 46 | Hacking out old broken glass (any thickness, size, quality or description)from metal frame including punching or drilling out old glazing pins/springclipsandprovidingand fixing new onescomplete all as specified and directed. |
| 47 | S & F 4 mm thick, sheet glass,ordinary quality and glazing with wooden beadsin square not exceeding 0.5 Sqm in each pane complete all as specified and as directed. |
| 48 | S & F 4 mm thick, sheet glass,ordinary quality and glazing with wooden beadsin square exceeding 0.5 Sqm in each pane complete all as specified and as directed. |
| 49 | S & F 5.5 mm thick, sheet glass,ordinary quality and glazing with oil puttyin square exceeding 0.5 Sqm in each pane complete all as specified and directed. |
| 50 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness including cover fillets/snap grid etc complete all as specified and directed. |
| 51 | S & F GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to cerntre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete including Hangers 6 mm dia GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of GI flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia, 40 mm long including 12mm thick, Gypsum Board as in ceiling fixed with screws as per manufacturers instructions complete all as specified and directed by the Engr-in-Charge. |
| 52 | M & L for Preparation of new plastered surfaces of ceiling of any description over 10 cm width or girth not otherwise described by "Vaccum based sanding machine" and applying two coats of plastic emulsion paint over a coat of primer by "Aquto Roller" machine over one or more coats of wall care putty to a smooth surface complete all as specified and directed. (Note: Multipurpose mixer shall be used for uniform and proper mixing of putty) |
| 53 | Taking down, Resecuring or easing & adjusting and refixing in the same opeing shutter of any description exc 1 Sqm but n. exc 2 Sqm each including refixing builder"s hardware as required and replacement of screws etc complete all as specified and directed. |
| 54 | Taking down, Resecuring or easing & adjusting and refixing in the same opeing shutter of any description n.exc 1 Sqm each including refixing builder"s hardware as required and replacement of screws etc complete all as specified and directed. |
| 55 | Taking down, Resecuring or easing & adjusting and refixing in the same opeing shutter of any description exc 2.0 Sqm each including refixing builder"s hardware as required and replacement of screws etc complete all as specified and directed. |
| 56 | S & F in repairStainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplescomplete all as specified and directed. |
| 57 | S & F in repairs 100 mm size, Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 58 | S & F in repair 150 mm size, extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 59 | S & F in repairs 100 mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 60 | S & F in repairs 75 mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 61 | S & F in repair 200 mm long, Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 62 | S & F in repairs 125 mm long, Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 63 | S & F in repairs 125 mm, Gate and shutter, hooks and eyes, Aluminium plate type II complete all as specified and directed. |
| 64 | S & F in repairs, 300 mm long,mild steel, ordinary rat tail rod pattern springs incuding roller and roller plate complete all as specifed and directed. |
| 65 | S & F in repair Aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clipes of sheet, cast or extruded sections and fixing bolts of extruded sectionsor cast aluminium alloy, length of bolt of 300 mm complete all as specified and directed. |
| 66 | Taking down existing locking system contains any numbers of levers, replacing the stucked/ damaged levers and applying oil/grease to all part and making full functional properly and re-fixed in position complete all as specified and directed. |
| 67 | S & F in repairs Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, 30mm width of flape when open complete all as specified and directed. |
| 68 | S & F in repairs 100 mm, 6 lever, Brass, Mortice Lock, vertical type with two keys complete all as specified and directed. |
| 69 | S & F in repairs, 75 mm, 2 lever, Brass, Mortice Lock, vertical type complete all as specified and directed. |
| 70 | S & F in repairs 20 mm bore, Brass chromium plated, tubular towel rail, D type, 60 cm long between flanges with brackets complete all as specified and directed. |
| 71 | S & F in repairs, Aluminium (Die cast) body door Closer hydraulically regulated, designation No 3, universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 Kg complete all as specified and directed. |
| 72 | S & F in repair fancy type brass magic eye for doors complete all as specified and directed. |
| 73 | S & F in repairs, acrylic PVC bathroom cabinet of size 350 x 450x100 mm with openable shutter fixed with looking mirror of selected quality and with suitable shelves in side the cabinet of superior quality as approved. (Make: Prayag Cat No. 551 or equivelant of make as per manufacturer"s list) |
| 74 | S & F in repair 20 mm dia, Aluminium anodised, curtain rod with bracket complete all as specified and directed. |
| 75 | S & F in repairs 20 mm dia, stainless steel, rod, heavy duty, 1.5 to 2mm thick fixed to cupboard/wall etc including stainless steel bracket of superior quality complete all as specified and directed. |
| 76 | S & F in repair Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed. |
| 77 | S & F in repair40mm dia, cupboard knobs fixed with nut,screw and washer of brass, polishedfixed with screwscomplete all as specified and directed. |
| 78 | Dismantling boarding, any description, fixed in any position with nails etc complete all as specified and directed. |
| 79 | S & F 18/19 mm thick, Prelaminated Particle Board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in shutter of cup-board shelf, etc complete all as specified and as directed. |
| 80 | S & F 18/19 mm thick, plywood, grade BWP, type BB, fixed with screwsto timber frame work, etc complete all as specified and directed. |
| 81 | S & F 0.90 mm thick, Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer"s instructions complete all as specified and directed. |
| 82 | S & F 6 mm thick, forexternal teak wood lipping to Plywood/particle board etc 18/19mm thick, fixed with nails complete all as specified and directed. |
| 83 | Taking down aluminium doors / Window shutters / ventilators of any size carrying out minor repairs / adjacement including replacement ofrubber beading, aluminium beads, cleats ofas required size and refixingin same position complete all as specifiedand directed. |
| 84 | S & F in repairs, vitreous China wash basin, size 550 x 400mm, white, flat back including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed. |
| 85 | S & F in repairs, Vitreous China squatting pan of pattern “long pan”, size 580 mm white with ‘P’ or ‘S” trap, front or back inlet and foot rests, any pattern (excluding flushing cistern and flush pipe)including provision of lime concrete bedding, connection to trap and flushing pipe etc complete including making good to disturbed surfaces of floor to match with existing specifications complete all as specified and directed. |
| 86 | S & F in repairs, vitreous China wash down water closet pan (pedestal pattern), white, including connection to outgoing drain andflushing pipe, anti syphonic pipe with seat and cover complete but excluding flushing cistern & flush pipe including making good damaged/disturbed surfaces complete all as specified and directed. |
| 87 | S & F in repair 15 mm bore, Hand Shower (Health Faucet) with 8mm Dia, 1.2 Meter Long Flexible Tube & Wall Hook with all accessories complete all as specified and directed. (Make: Jaquar Cat No. ALD-573 or equivelant of make as per List of manufacturer"s) |
| 88 | S & F in repairs 15mm bore, 2 Way Bib Cock with Wall Flange, fancy type cast copper alloy, chromium plated with handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. (Make: Jaquar Cat No. KUP-35041PM or equivelant of make as per list of manufacturer) |
| 89 | S & F in repair 15 mm bore, angular stop cock with wall flange, cast copper alloy, chromium plated, fancy type with handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. (Make: Jaquar Cat No. OPP-15053PM or equivelant of make as per list of manufacturer) |
| 90 | S & F in repair 15 mm bore, pillar taps, brass chromium plated, Single Lever screwed for iron pipe complete all as specified and directed. (Make: Jaquar Cat No. OPP-15001PM or equivelant of make as per list of manufacturer"s) |
| 91 | S & Fin repairs, CP, Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, onnecting Legs & Wall Flange (without Hand & Overhead Shower) complete all as specified and directed. (Make : JAQUAR, Cat No . FUS-29281 or equivelant of make as per list of manufacturer"s) |
| 92 | S & F in repairs, Paper Holder with Flap Recessed Type (Stainless Steel) fixed to wall with brass screw complete all as specified and directed. (Make: Jaquar Cat No. AHS-1553 or equivelant of make as per List of manufacturer"s) |
| 93 | S & F in repairs, Towel Rack 600mm long with Lower Hangers including Chromium plated brass screws and wooden/plastic cleats etc complete all as specified and directed. (Make: Jaquar Cat No. AQN-7781 or equivelant of make as per list of manufacturer"s) |
| 94 | S & F in repairs, Towel Ring round including Chromium plated brass screws and wooden/plastic cleats etc complete all as specified and directed. (Make: Jaquar Cat No. AQN-7721 or equivelant of make as per list of manufacturer"s) |
| 95 | S & Fin repairs, CP, Hand Shower ø140mm Round Shape Multi Flow with Air Effect (ABS Body & Face Plate Chrome Plated) with Rubit Cleaning System complete all as specified and directed. (Make : JAQUAR, Cat No . HSH-1729 or equivelant of make as per list of manufacturer"s) |
| 96 | S & Fin repairs, Easy Flex Tube in Chrome Finish 1.5m Long with Nuts complete all as specified and directed. (Make : JAQUAR, Cat No . SHA-571 or equivelant of make as per list of manufacturer"s) |
| 97 | S & F in repair Overhead Shower 150X150mm Squarel Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System complete all as specified and directed. (Make: Jaquar Cat No. OHS-35495 or equivelant of make as per list of manufacturer"s) |
| 98 | S & F in repair corner glass shelf assembly with chromium plated bracket guard and railing complete all as specified and directed.(Make: Jaquar Cat No. ACN-1173 or equivelant of approved make) |
| 99 | S & F in repair Soap Dish Holder, fixed in walls with plugs & chromium plated brass screws complete all as specified and directed. (Make: Jaquar Cat No. AKP-35731P or equivelant of approved make) |
| 100 | S & F in repair tumbler holder, brass chromium plated, fixed in walls with plugs & chromium plated brass screws complete all as specified and directed. (Make: Jaquar Cat No. AKP-35741P or equivelant of approved make) |
| 101 | S & F in repair 6 mm thick, looking mirror of selected quality Balgium glass, mounted on 12 mm thick AC building board or commercial plywood back and fixed with stainless steel beading of size 40 x 20 mm complete all as specified and directed. |
| 102 | S & F in repairs,Vitreous China wash basin, Table Top Basin, Size: 700x435x135 mm, Rectangular Shape excluding taps fixed on granite slab complete all as specified and directed. (Make : Jaquar Cat No. ARS-WHT- 39903 or equivalent of make as per List of manufacturer"s) |
| 103 | S & F in repairs Vitreous China, Single piece-WC, Size: 365x655x765 mm, with UF soft close slim seat cover, Hinges, Fixing Accessories, Accessories Set and Cistern fittings, P Trap-180mm complete set and all fittings and fixtures including connection to outgoing drain including making good damaged/disturbed surfaces complete all as specified and directed. (Make: Jaquar LYS-WHT-38851P180UFSM or equivelant of make as per list of manufacturer"s) |
| 104 | S & F in repairstainless steel Grating, 110mm dia fixed with white cement complete all as specified and as directed. |
| 105 | S & F in repairstainless steel Grating, 75mm dia fixed with white cement complete all as specified and as directed. |
| 106 | S & Fin repairs, Brass CP mixer with 3-in-1 system for mixing hot & cold water screwed down for iron pipe, 15mm bore and fixed complete all as specified and directed |
| 107 | S & F in repairs 15mm bore, PVC connection pipe 450mm long with PTMT nuts at both ends complete all as specified and directed. |
| 108 | S & F in repairs, 15mm bore, PVC connection pipe 600mm long with PTMT nuts at both ends complete all as specified and directed. |
| 109 | S & F in repairs, 15mm bore, PVC connection pipe 750mm long with PTMT nuts at both ends complete all as specified and directed. |
| 110 | S & F in repair 15 mm bore,Connection pipe, Chromium plated, 600 mm long with hexagonal nut & washers fitted at both ends complete all as specified and directed. |
| 111 | S & F in repair 40 mm dia, Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc including all fitting as required complete all as specified and directed. |
| 112 | S & F in repairs,plastic water closet, Seat and Cover for pedestal pan, white / black, closed pattern with flat bottomand mild steel chromium plated or aluminium hinging device complete all as specified and directed. |
| 113 | S & F in repairs,plastic water closet, Seat and Cover, soft closed for pedestal pan, snow white, closed pattern with flat bottomand mild steel chromium plated or aluminium hinging device complete all as specified and directed. (Make: CERA Cat No: B1510106 or equivelant of make as per list of manufacturer"s) |
| 114 | S & F in repairs, 10 litre capacity, PVC valve less syphonic action type, flushing cistern, low level, white,with inlet, ball valve, flush pipe, float and handle including brackets complete all as specified and directed. |
| 115 | S & F in repairs PVC syphonic kit suitable for 10 litre capacity low level cascadde type flushing cistern and making the cistern functional in all respectcomplete all as specified and directed. |
| 116 | S & F in repairs float handle as per the existing specifications suitable for 10 litre capacity low level flushing cistern and making the cistern functional in all respect complete all as specified and directed. |
| 117 | S & F in repairs, stainless steel kitchen sinks with drainage board made of1 mm thick sheet for kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm complete all as specifiedand directed. |
| 118 | S & F in repairs, stainless steel sinks made of1 mm thick sheetwith plugs, washers and wastes including bedding in ement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 119 | S & F in repairs, Stainless steel, kitchen plate rack of size 24x30x10 inch as per existing design and specification as approved complete all as specified and directed. (Make: Prayag Cat No. P-330 or equivelant of make as per list of manufacturer"s) |
| 120 | S & F in repairs brass spindle (heavy) suitable for bib taps/stop valve of 15mm bore all as per the existing specifications complete all as specified and directed. |
| 121 | S & F in repairs brass spindle (heavy) suitable for concealed stop cock of 15mm bore, any type all as per the existing specifications complete all as specified and directed. |
| 122 | S & F1000 litres capacityrotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top), hoisted and fixed in position including taking down old unserviceable one as specified in SSR Part I and directed. |
| 123 | S & F 225 litres capacity, rotational moulded polyethylene loft water storage tanks (Cylindrical vertical with closed top), hoisted and fixed in position including taking down old unserviceable one complete all as specified in SSR Part I and as directed. |
| 124 | S & F in repair 15 mm bore,Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight - 142 gms) complete all as specified and directed. |
| 125 | S & F in repairs, 20 mm bore,Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight - 210 gms) complete all as specified and directed. |
| 126 | S & F in repairs, 15 mm bore, gun metal Gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 127 | S & F in repairs, 20 mm bore, gun metal Gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 128 | Taking up or down 15mm bore, Steel tubing and connections and keeping serviceable pipes in safe custody for reuse in the work after and including cleaning as directed. |
| 129 | Taking up or down 20mm bore, Steel tubing and connections and keeping serviceable pipes in safe custody for reuse in the work after and including cleaning as directed. |
| 130 | Refixing of 15mm bore old serviceable steel tubing and connections in new or old position with new fittings complete to walls and ceilings or laid in floors, etc complete as directed. (Note: Serviceable pipe shall be reused as obtained from serial item No. 128 above) |
| 131 | Refixing of 20mm bore old serviceable steel tubing and connections in new or old position with new fittings complete to walls and ceilings or laid in floors, etc complete as directed. (Note: Serviceable pipe shall be reused as obtained from serial item No. 129 above) |
| 132 | Supply, laying, connection and testing, 15mm bore, Steel water tubing, galvanised, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, etc complete all as specified and directed. |
| 133 | Supply, laying, connection and testing, 20mm bore, Steel water tubing, galvanised, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, etc complete all as specified and directed. |
| 134 | Demolition of un-reinforced cement Concrete of any description and in any position not otherwise specifically provided for and removing rubbish to outside MD land complete all as specified and directed. |
| 135 | M & L for filling polymer modified non shrinking slurry with CEBEX 100 (Fosroc) chemical for sunken floors for toilets by drilling holes to a depth of 60mm by 20mm dia at 1 mtr interval and applying 2mm thick brush bond over the concrete syrfaces by mixing acrylic emulsion NITO BOND BB with brush bond powder and wateras per the manufacturer"s technical specification complete all as specified and as directed (Make: M/S Fosroc or M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. orM/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd.) |
| 136 | M & L for Plain cement concrete 1:5:10, type E-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete, etc complete all as specified and directed. |
| 137 | S & F in repairs, 15 mm bore, Stop valves, cast copper alloy, with long shank and cup, concealed type, screwed downhigh pressure, with chromium plated Exposed Part Kit of Concealed Stop Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange, screwed both ends for iron pipe or for unions complete all as specified and directed. (Make: Jaquar Cat No. ALD-083 & CON-083FTKor equivalent of make as per List of manufacturer"s) |
| 138 | S & F in repairs, 15mm bore, bib taps, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 139 | S & F in repairs, 15 mm bore, pillar taps, fancy type, cast copper alloy, chromium plated with capstan heads, screwed down high pressure with or without lettered "Hot or Cold" with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. |
| 140 | S & Fin repairs, Brass CP, central hole basin mixer with pop up waste system with 450mm braided connection pipe , 15mm bore and fixed complete all as specified and directed. (Make : Jaquar Cat No. CQT-23169B or equivelant of make as per list of manufacturer"s) |
| 141 | S & F inrepair 125 mm size, shower rose, brass chromium plated, swival type, complete all as specified and directed. |
| 142 | S & F in repair 15 mm bore, angular stop valve, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 143 | S & F in repairs,Vitreous China, Under Counter Wash Basin 550 x 405 x 205 mm, snow white excluding taps fixed on granite slab complete all as specified and directed. (Make : CERA Cat No. S2030105 or equivalent of make as per List of manufacturer"s) |
| 144 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and disposal ofdebris and rubbish to outside MD land complete all as specified and directed. |
| 145 | M & L for glazed, coloured, ceramic, tiles of size (350mm x 250 mm/450mm x 350mm/300mmx450mm) x 6 to 7 mm thick, on vertical surfaces such as skirting, dados etc, including 10 mm thick bedding in cement mortor 1:4 and set & jointed in neat cement slurry & pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed. |
| 146 | M & L for non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm, in floors etc, including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed. |
| 147 | M & L for non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, in floors etc, including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed. |
| 148 | M & L for Glazed, ceramic, colouredtiles of size 300mm x 200mm x 6-7mm thick, on vertical surfaces such as skirting, dados etc, including 10 mm thick bedding in cement mortor 1:4 and set & jointed in neat cement slurry & pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed. |
| 149 | M & L for non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, in floors etc, including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed. |
| 150 | M & L for Vitrified, designed, light shade coloured (light shade), tiles, 10 mm thick, (square/rectangular) polished, area of each tiles not exc 0.36 sqm, in floors, etc including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed. |
| 151 | M & L for Vitrified, designed, light shade coloured, tiles, 10 mm thick, (square/rectangular) polished, area of each tiles not exc 0.36 sqm as in vertical surfaces such as skirting,dado, etc including 10 mm thick bedding in cement mortar 1:4 and necessary cutting of tiles complete all as specified and directed. |
| 152 | Material and labour for 23-25 mm thick pre-polished coloured and chemically treated cement concrete chequered tiles, glossy finish, of size 300x300mm, ISI marked (IS-13801-1993), set, jointed in neat cement slurry and pointed with white cement mixed with pigment to match over and including 20mm thick scread bed in cement mortar 1:6 complete all as specified and directed |
| 153 | M & L for granite stone slab(of any type) work (table rubbed or polished) as in floor, 18 to 20 mm thick, machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 15 mm thick screed bed in cement mortor 1:6 & cutting, polishing complete all as specified and directed. |
| 154 | Cleaning of blocked gully traps and waste pipes of any dia upto first manhole by removijng the deposited sludge or any blockage and flushing out with watercomplete all as specified and directed. |
| 155 | S & F in repair FRP sheet 2mm thick as covering to grills or as view cutter, fixed with self tapping screwscomplete all as specified and directed as per specification and directed |
| 156 | M & L for grinding of Marble/ Cuddapah/ kota/ Mosaic/ Shahabad floor/ dado etc with suitable grit size Carborandum stones, and removing black spots and other faded surfaces on existing terrazzo floor with mechanical, hand grinding, grouting with suitable neat cement grit of same colour cement of the original floor, washing the surfaces clean and rubbing hard with slightly mustered felt with oxalic acid and tin oxide polishing and polishing the floor with felt or hassian base cloth and making the floor bright with polish complete all as specified |
| 157 | S & F in repairs 50 mm bore, Unplasticized PVC pipes of pressure rating 10 kgf/sq. cm fixed to walls, laid in floor etc completeall as specified and directed. |
| 158 | S & F In repairs, aluminium bottom strips for entrance doors, Minimum 0.5mm thick, 20 to 25mm wideto arrest entry of insects including fabric dust remover fixed at the bottom of the stripcomplete all as specified and as directed. |
| 159 | M & L forpost construction Antitermite treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron.complete all as specified and directed. |
| 160 | M & L for post construction Antitermite treatment Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed. |
| 161 | M & L for post construction Antitermite treatment by treating At points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
