Public Works Department-PWD has published Construction Of Block Elementary Education Office Building At Thural Distt. Kangra ( Hp ) Balance Work Of Construction Of Building Portion Including Water Supply And Sanitary Installation. Submission Date for this Tender is 05-08-2022. Building Work Tenders in bhawarna Himachal Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Providing and laying cement concrete grade M-25 (M-Twenty five) design mix with minimum compressive strength 25N/mm2 ( twenty five newton per millimetre square )with cement contents not less than 360 Kg (Three hundred sixty kilogram)per Cubic metre mechanically mixed and vibrated including curing complete as per PWD specification, drawing and design excluding the cost of form work and reinforcement for reinforcement cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto any floor level including carriage of materials with in all leads, lifts and other incidentals and further as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of Royality, Malkana, sale tax, toll tax, GST and any other taxes imposed by the government. |
| 2 | Providing and laying tor steel of TataTISCO, SAIL reinforcement for reinforced cement concrete work including bending, binding and placing in position complete in all respects as per approved drawing, design, and specification in all floor levels including the cost of binding wire and dewatering if arrisen during placement of reinforcement as per PWD specification and approved, drawing design including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government. |
| 3 | Second class brick work using common burnt clay building F.P.S. (non modular) bricks in cement mortar 1:6 (one cement isto six sand) in super structure upto all floor levels as per PWD specification, drawing and design and curing complete including scaffolding and cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government. |
| 4 | Providing and fixing Coloured anodised aluminium frames for door, window and ventilator and glazing partitionextrusion sectionof Jindal/ Hindalcoas per approved shadework for door, window ,ventilator and partition with extruted built up standard tubular and other sections of approved make confirming to IS:733 and IS:1285 anodised transparent or dyed to require shade accordingly to IS:1868 (minimum anodic coating of grade AC15) fixed with raw plugs and screws or with fixing clips , necessary filling up of gaps and junctions at top , bottom and sides with required with PVC / neoprene filles etc. aluminium section shall be smooth rust free, straight, mitred and jointed mechanically wherever required including clests angle, aluminium, snap beeding for glazing/ panelling C.P. brass / stainless steel screws all complete.The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. |
| 5 | Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm (Thirty five into thirty five into five millimetre), joints mitred and welded by angle iron 35x35x5 mm (Thirty five into thirty five into five millimetre) or 35x 5 mm (Thirty five into five millimetre flat pieces to the existing T iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer complete, as required at site as per H.P.P.W.D. specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of materials within all leads lifts and other incidential. The rate is includingoctroi,royality, Malkana, toll tax, sales tax orother taxesimposed by the Government. |
| 6 | Providing and fixing 40 mm thick (Forty millimetre) Second class Deodar wood panelled glazed or panelled and glazed shutters for doors, windows and clearstory windows including black enamelled iron but hinges with necessary screws complete, as required at site as per H.P.P.W.D. specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of materials within all leads lifts and other incidential. The rate is includingoctroi,royality, Malkana, toll tax, sales tax orother taxesimposed by the Government. |
| 7 | Providing and fixing Factory made Century/ Alpro or equivalent 35mm (Thirty five millimetre) thick flush door shutters both side commercial including non decorative phenol bonded termite resistant and bailing water proof core of blockboard constructed with Ist class frame of hard wood and well matched commercial 3 (Three) ply veneer with vertical grains of cross bands and both faces of flush door EPDM gasket. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 8 | Providing and fixing 35 mm thick (Thirty five millimetre) 2nd class teak wood wire gauge shutters using galvanised M.S. (mild steel) wire gauge using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm (zero decimal six three millimetre) for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws. The rate is inclusive of octroi, royality, malkana, sales tax, toll tax, GST or all type of other taxes imposed by the Government. |
| 9 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm (Fifty into forty seven millimetre) with awall thickness of 5 mm (Five millimetre), made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size complete, as required at site as per H.P.P.W.D. specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of materials within all leads lifts and other incidential. The rate is includingoctroi,royality, Malkana, toll tax, sales tax orother taxesimposed by the Government |
| 10 | Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of size 75 mm x 30 mm having wall thickness 5 mm. The styles, top & bottom rails shall have one side wall thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mmx 1 mm, painted with primer , all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5mm PVC sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rail of size 100 mm x 30 mm with wall thickness 5 mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100mm x 8 mm complete as per H.P.P.W.D. specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of materials within all leads lifts and other incidential. The rate is includingoctroi,royality, Malkana, toll tax, sales tax orother taxesimposed by the Government |
| 11 | Providing and fixing steel glazed doors, windows and ventilators of standard rolled steel sections joints mitred and welded with 16x3.15mm(Sixteen into three decimal fifteen milimetres) lugs 10cm(Ten centimetres) long with steel plugs and screws or rawl plugs screws or with fixing clips or with bolts and nuts as required and iron fitting, including providing and fixing of glass pans with glazing clips and special metal sash putty of approved make complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 12 | Fixed steel windows |
| 13 | Top hung Ventilators |
| 14 | Providing and fixing factory made double steel shutter side hungs (one glazed and one wire gauge) for steel windows side hung (one glazed and other wire gauged) of standard rolled steel sections, jointing mitered welded withmanufactured to relevant ISI standard specification with steel plugs and screws or rawlplugs screws or with fixing clips or with bolts and nuts as required and iron fitting, including providing and fixing of glass pans with special putty of glazed side of shutter and wire gauge of IS designation 85G with metal beading on other side complete including priming coat of red lead paint. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 15 | Providing andfixing M.S. plain grills 10x10mm (Ten into ten millimetre) square bar in combination of 20x4mm (Twenty into four millimetre) M.S. flat as per design required pattern in wooden frames of windows etc. with M.S. round headed bolts and nutsor by screws. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 16 | Providing and fixing 250x16mm (Two hundred fifty into sixteen milimeter) size coloured / anodized aluminum sliding door bolt ISI marked(anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete. The rate is inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge.Rate is inclusive of toll tax, GST and any other taxes imposed by the government. |
| 17 | Providing and fixingcoloured anodized aluminum tower bolts ISI marked(anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 18 | 250x10mm (two hundred fifty into ten millimetre) size |
| 19 | 100x10mm (one hundred fifty into ten millimetre) size |
| 20 | Providing and fixing coloured / anodized aluminum handle anodized transparent or dyed to required shade or colour with necessary screws etcetra complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 21 | 125mm (One hundred twenty five millimetre) size |
| 22 | 100mm (One hundred millimetre) size |
| 23 | Providing and fixing 150mm (One hundred fifty millimetre) oxidized M.S. single acting spring hinges with necessary screws complete including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government. |
| 24 | Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etcetra completeincluding cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government. |
| 25 | Providing and fixing 100mm (One hundred millimetre) ISI marked oxidised M.S. Handles conforming to IS:4992 with necessary screws etcetra complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 26 | Providing and fixing the complete box of cup board sahll be made of 25mm (Twenty Five millimetre) thick water proof termite resistant commercial board of Uniply / Green ply/ IS marked including shelves.Back side of board shall have6 to 8 mm (Six to eight millimetre) thick water proof ply all the cut portion of board shall have 6 mm (Six millimetre) thick hard wood edging. The shutter from all side shall be finished with 1mm thick lamination ISI Marked of approved shade of Century / Greenlam /Action Tesaand 19 mm (Nineteen millimetre) thick water proof comercial board of uniply / Greenplyfor shelves including hinges, handle completeas per specifications, approved drawing, design,as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. |
| 27 | Providing and fixing 65mm (Sixty five millimetre) special quality bright finished brasscupboard or ward robe locks with four levers of approved quality including necessary screws etcetra complete including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government. |
| 28 | Providing and laying 600x600 mm (Six hundred into six hundred millimetre) vitrified floor tiles (thickness to be specified by the manufacturer) with water absorption less than 0.08% (zero decimal zero eight percent) and conforming to IS:15622, of approved make, in all colours and shades, laid on 20mm (Twenty millimetre) thick cement mortar 1:4 (One cement isto four coarse sand),jointing with grey cement slurry at the rate 3.3 kg/ sqm(Three decimal three kilogram per square metre) including grouting the joints with white cement and matching pigments etcetra, complete as per specifications, approved drawing, design,as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. |
| 29 | Providing and laying 600x600 mm (Six hundred into six hundred millimetre) vitrified floor tiles (thickness to be specified by the manufacturer) with water absorption less than 0.08% (zero decimal zero eight percent) and conforming to IS:15622, of approved make, inskirting, riser of steps, over 12 mm (Twelve millimetre) thick bed of cement mortar 1:3 (One cement isto three coarse sand), jointing with grey cement slurry at the rate 3.3 kg/ sqm(Three decimal three kilogram per square metre) including grouting the joints with white cement and matching pigments etcetra, complete as per specifications, approved drawing, design,as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. |
| 30 | Providing and fixing 600x600x10mm (Six hundred into six hundred into ten millimetre) double charge / Ultra Chargevetrified tiles of Resitile/ Nitco/ Kazaria/Rakwater proof stain and impact resistent hevy duty viterified tilesmanufactured of approved shade and colour in flooring on 12mm (Twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required completeas per specifications, approved drawing, design,as per the entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. |
| 31 | Providing and fixing 600x600x10mm (Six hundred into six hundred into ten millimetre) double charge / Ultra Chargevetrified tiles of Resitile/ Nitco/ Kazaria/Rakwater proof stain and impact resistent hevy duty viterified tilesmanufactured of approved shade and colour in skirting jointed with cement slurry mixed with pigment to match the shade of tiles as required complete as per specifications, approved drawing, design,as per the entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. |
| 32 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (Three hundred into three hundred millimetre) (thickness to be specified by the manufacturer) ofFirst quality conforming to IS : 15622 of approved make in colours such as White,Ivory, Grey,Fume Red Brown, laid on 20mm (Twenty millimetre) thick cement mortar 1:4 (One Cement isto four Coarse sand), Jointing with grey cement slurry at the rate 3.3 kg/sqm (Three decimal three kilogram per square metre) including pointing the joints with white cement and matching pigment etcetra complete as per specifications, approved drawing, design,as per the entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. |
| 33 | Providing and fixing First quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any sizein skirting, risers of steps and dados over 12 mm (Twelve millimetre) thick bed of cement Mortar 1:3 (One cement isto three coarse sand) and jointing with grey cement slurry at the rate of3.3kg /sqm (Three decimal three kilogram per square metre) including pointing in white cement mixed with pigment of matching shade complete as per specifications, approved drawing, design,as per the entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. |
| 34 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm (Eighteen millimetre) thick stone slab over 20 mm (Twenty millimetre) (average) thick base of cement mortar 1:4 (One cement isto four coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etcetra complete as per specifications, approved drawing, design,as per the entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. |
| 35 | Providing and laying Kota stone slab 25 mm (Twenty five millimetre)thickSingle slabflooring of approved shade over20mm (Twenty millimetre) average thick baseof cement mortar 1:4 (One cement isto four sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing as per approved specification, drawing and design and entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 36 | Kota stone slab 25 mm (Twenty five millimetre)thick in Single slab in riser of steps, skirting, dado and pillars of approved shade laid over 12mm (Twelve millimetre) average thick baseof cement mortar 1:3 (One cement isto three sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing as per approved specification, drawing and design and entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 37 | Kota stone slab 25 mm (Twenty five millimetre)thick in Single slab with round noising for treads and riser of stairs approved shade 12mm (Twelve millimetre) average thick baseof cement mortar 1:4 (One cement isto four sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing as per approved specification, drawing and design and entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 38 | Providing and laying 300x300x25mm (Three hundred into three hundred into twenty five millimetre) labrador design (Rainbow series) Tile of NTC/ Atlantic/ Unistone flooringon 20mm (twenty millimetre) average thick base of cement Mortar 1:3 (One cement isto three sand) laid on Ramp and jointed with neat cement slurry mixed with pigment to match the shade of tilesincluding rubbing, polishing, cutting and moulding complete as per specifications, approved drawing, design,as per the entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. |
| 39 | Providing and fixing pre-painted sheet roofing of kotar metal single skin trapezoidal 10 (ten) refitted sheeting 0.60mm (zero decimal six millimetre) thickness having 1060mm (one thousand sixty millimetre) cover width cover all width 1126mm (One thousand one hundred twenty six), 28mm (Twenty eight millimetre) crest depth at 353mm (three hundred fifty three millimetre) 2.50mm (two decimal five zero millimetre) the main crest with at top 25mm (Twenty five millimetre) and at lower 81mm(Eigthy one millimetre) base metal of coil rolled steel coil with zinc waiting top coat with regular modified polysters coating of approved shade and balancing reverse coat 5.5mm (five decimal five millimetre) dia and 55mm (fifty five millimetre) length with EPDM seal complete in all respectas per specifications, approved drawing, design,as per the entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. |
| 40 | Providing and fixing pre-painted sheet ridge or hips 60cm (sixty centimetre) over all of kotar metal skin trapezoidal profiled sheeting 0.60mm (zero decimal six zero millimetre) cover with over all width 1126mm one thousand one hundred twenty six millimetre), 28mm (twenty eight millimetre) crest depth at 353mm (three hundred fifty three millimetre) 2mm (two millimetre) centre to centre crest distance. There will be two ribs at the centre for stiffening heaving crest depth of 2.5mm (two decimal five millimetre) the main crest with at topzinc waiting top coat with regular modified polyster coating of approved shade and balancing reverse coat 5.5mm (five decimal five millimetre) dia and 550mm (five hundred fifty millimetre)length with DPDM seal complete in all respectas per specifications, approved drawing, design,as per the entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. |
| 41 | Providing and fixing 15cm (Fifteen centimetre) wide, 45cm (Forty five centimetre) overall semi circular plain G.S. sheet gutter of 0.63mm (zero decimal six zero millimetre) thick sheet with zinc coating not less than 275 gm/ sqm (Two seventy five gram per square metre) fixed withiron brackets 40x3mm (Forty into three millimetre) siz, bolts, nuts and washers etcetra including making necessary connections with rain water pipe complete including cost and carriage of material with in all leads, lifts and other incidentals, as per specifications, approved drawing and design, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government. |
| 42 | Providing and fixing pre-painted sheet valleys 90cm (Ninety centimetre) over all of kotar metal single skin trapezoidalprofiled sheet 0.60mm (zero decimal six zero millimetre) thickness having 1060mm (One thousand sixty millimetre) cover width aver all width 1126mm (One thousand one hundred twenty six millimetre) of TATA Durashine/ Sail in roofing with hot dipped metalic zinc coated sheet with top coat of regulatr modified polyster organic coating of primer coating including fixing withJ or L hooks, bolts and nuts 6mm (Six millimetre) dia with prepainted limpet and bitumen washers complete in all respect as per specifications approved drawing and designincluding cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government. |
| 43 | Providing and fixing 110 mm (One hundred ten millimetre) Single socketed pipes on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (Ten millimetre) gap for thermal expansion, complete in all respect as per specifications approved drawing and design including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government. |
| 44 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (Ten millimetre) gap for thermal expansion complete in all respect as per specifications approved drawing and design including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government. |
| 45 | 150mm (one hundred fifty millimetre) dia PVC plain bend |
| 46 | 150mm (one hundred fifty millimetre) dia PVC shoe |
| 47 | Providing and fixing M.S. B.P. sheet 2 mm (two millimetre)thick of TATA/SAIL for eaves board/Facia/Soffit/Ceiling including cutting, fixingand jointing with gass/electric welding with steel roof member and applying a coat of red lead primer complete as per PWD specification, approved drawing and design (frame work is to be measured and paid for separately) including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government. |
| 48 | Providing and fixing 100mm (One hundred millimetre) diametre M.S. holder bat clamps of approved design to P.V.C pipes embedded in and including cement concrete block 10cmx10cmx10cm (Ten centimeter into Ten centimeter into Ten centimeter) of 1:2:4 (One cement is to Two Sand is to Four graded crushed stone aggregate 20mm (Twenty milimetre) nominal size and cost of cutting holes and making good the wall etcetera. The rate is inclusive of cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer- In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government. |
| 49 | Structural steel work riveted, bolted or welded in built up sections of Tata/Sail in beams, joists, channels, angles, tees flats withconnecting plates or angles, cleats as in trusses and trussed purlins, main and cross beams, hips, jack rafters, purlins connect to common rafter and like work including cutting hoisting fixing in position & applying a priming coat of red lead paint complete including entire carriage of material within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government. |
| 50 | 20mm (Twenty millimetre) thick cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto any floor level including arrises, internal rounded angles, chamfers or rounded angles not exceeding 80mm (eighty millimetre) in girth, in rough side with cement mortar 1:6 (one cement isto six sand) complete as per PWD specification including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government. |
| 51 | 20mm (fTwenty milimetre) thick cement plaster on the fair side of brick/concrete/stone walls for interior plastering upto any floor level including arrises, internal rounded angles, chamfers or rounded angles not exceeding 80mm (eighty millimetre) in girth, with cement mortar 1:4 (one cement isto four sand) including curing as per PWD specification and cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government. |
| 52 | 6mm (six millimetre) cement plaster 1:3 (one cement isto three sand) in ceiling and curing complete as per PWD specification including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government. |
| 53 | Applying a priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning, oil, grease, dirt and other foreign matter, sand papering and knotting with ready mixed paints of Asian/ Nerolac Paint brushing wood primer pink as per PWD specification including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government. |
| 54 | Painting two coats (excluding priming coat) on new wood and wood based surfaces with Dulux Multi Surfacepaint ofrequired shade applied at the rate of 0.90 ltr/10 sqm (zero decimal nine zero litre per ten square metre) over an under coat of primer applied at the rate of 0.75 ltr/ 10 sqm (zero decimal seven five litre per ten square metre) including cleaning the surfaces of all dirt, dust and other foreign matters and sand papering and knotting as per PWD specification including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government. |
| 55 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface completeas per PWD specification including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government. |
| 56 | Applying Birla white wall care putty over plaster surface after throughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters and sand papered smooth to give final matt finish to the surface complete including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government. |
| 57 | Distempering (two or more coats) with oil boundwashable distemper of Berger/Nerolac/Asian Paint and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings & other foreign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer as PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government. |
| 58 | Finishing wall with spectrum textured wall finish natural grit of heritage coating of 1.5 mm (One decimalfive millimetre) thicknesswater proffing cement paint of approved shade and manufacture and ofrequired shade on undecorated wall surfaces (two or more coats at the rate of 3.84 Kg/ 10.00 Sqm (Three decimal eight four kilogram per ten square metre) to give an even shade after throughly brushing the surface to remove all dirt and remains of loose powedred material.The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 59 | Providing and fixing stainless steel 85 cm ( Eighty five centimeters) high know down stair railing of kitch38 mm (thirty eight millimetre) dia hand rail fixed on 10x50 mm ( ten into fifty millimetre) side mounted flat blauster system with glass no DS 54-2- G-10 placed at 1200 mm ( twelve hundred millimetre) center to center along with 3 Nos (three numbers) 10mm ( ten millimetre) mid rail connected at side of blauster with fixes on the blauster would be fixed on floor with casted base plate on minimum 6 mm (six millimetre) thickness base plate shall be conncected with suitable SS grade over cape alinging complete as per detail and design. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 60 | Providingplinth protection with 60 mm (Sixty millimetre) thick interlocking tiles/ cement concrete paver block with 23 cm ( twenty three centimetre) dia half round RCC pipe for drainage purpose laid over 10cm (ten centimetre)concrete 1:5:10 (one isto five isto ten) in bedding/ haunching complete including cost and carriage of material with in all leads, lifts and other incidentals as per drawing, design and specifications, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government. |
| 61 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm(Twenty into ten into two millimetre) and braced with flat iron diagonals 20x5mm (Twenty into five millimetre) size with top and bottom rails of T iron 40x40x6 (Forty into forty into six) with 38mm (Thirty eight millimetre) dia steel pulley complete wityh bolts and nuts locking arrangements stoppers, handles, including applying a priming coat of red lead paint.The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 62 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 (Ten)litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 63 | Providing and fixing White Vitreous China Wash basin size 630x450 mm (Six hundred thirty into four hundred fifty millimetre) with a single 15 mm (Fifteen millimetre) C.P. brass pillar tap wash basin with C.I. brackets, 15 mm (Fifteen millimetre) C.P. brass pillar taps, 32 mm (Thirty two millimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 64 | Providing and fixing vitreous China pedestal of Jaguar/ Hindware/ Cera/ Jal for wash basin having recess at the back for the reception of pipes and fittingsincluding carriage of material within all leads, lifts and other incidentals complete in all respect as per direction and satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government. |
| 65 | Providing and fixing 610x460 mm (Six hundred ten into four hundred sixty millimetre) bowl depth 200 mm (Two hundred millimetre) Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm (Forty millimetre), including painting of fittings and brackets, cutting and making good the walls wherever required. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 66 | Providing and fixing G.I. inlet connection pipe for each flush pipe with W.C. pan as per Architectural drawing, design and specifications including entire carriage of material within all leads, lifts and other incidentals as per direction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government. |
| 67 | Providingandfixing32mm (Thirty two millimetre) diametre PVC Waste pipe for wash basin or sink including brass check net with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government. |
| 68 | Providing and fixing 100mm (One hundred milimetre) nominal size diametre CPgrating of ESS-KSS for nalhni trap of approved shade complete, within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 69 | Providing and fixing 8 mm (Eight millimetre) diametre C.P. / S.S. Jet with flexible tube upto 1.00 (One) metre long with S.S. Triangular plate to Eureopean type W.C. of quality and make within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 70 | Providingandfixing600x450mm(sixhundredintofourhundredfiftymillimetre)bevelededgemirrorof superior glass 6mm (six millimetre) thick of Modiguard/ Atul/ Golden Fish mounted on 6mm (six millimetre) thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. screws and washers including entire carriage of material within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government. |
| 71 | Providing and fixing 600x120x5mm (Six hundred into One hundred twenty into five millimetre) glass shelf with C.P. Brass bracket and guard rail fixed with 40mm (Forty millimetre) long screws, rawl plugs etcetra complete within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government. |
| 72 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600mm (Six hundred millimetre) long towel rail with total length of 645 mm (Six hundred forty five millimetre), width 78 mm (Seventy eight millimetre) and effective height of 88 mm (Eighty eight millimetre), weighing not less than 190 gms (One hundred ninety grams) complete within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government. |
| 73 | Providing and fixing chromium plated brass soap dish of continental series of Jaguar/ Classic series of Hindware/ Floral series of Cera/ Hindson series of Jal ESS with C.P. brassbrackets fixedwith cleats C.P. brass screws including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government. |
| 74 | Providing and fixing 15mm (Fifteen milimetre) diameters C.P. brass bib tap of continental series of Jaguar/ Classic series of Hindware/ Floral series of Cera/ Hindson series of Jal as per specifications including carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government. |
| 75 | Providing and fixing cancealed C.P. brass stop cock of continental series of Jaguar/ Classic series of Hindware/ Floral series of Cera/ Hindson series of Jal (heavy duty makes ISI marked ) 15mm(Fifteen millimetre)as per specifications including entire carriage of material within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government. |
| 76 | Providing and fixing PVC connection pipe brass union 450 mm (Four hundred fifty millimetre) length15mm (Fifteen millimetre) diametreof ISI markedincluding necessary fitting complete within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government. |
| 77 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government. |
| 78 | Providing and fixing 1216 ( 16mm OD Pipe) Concealed work, Polyethelene-Aluminium Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS-15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C (Eighty degree celsius), including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 (One) metre spacing. This includes the costs of cutting chases and including testing of joints completeincluding cutting chases and aking good the wall etcetra within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government. |
| 79 | Providing and fixing 20mm (Twenty millimetre)diametre G.I. pipes complete with G.I. Fittings including trenching and refilling etcetra within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government. |
| 80 | Providing and fixing 15mm (Fifteen millimetre)diametre G.I. pipes complete with G.I. Fittings including trenching and refilling etcetra within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government. |
| 81 | Excavation in drains and channels etc; in earth work in all classification of soil, such as pick work, jumper work, pick jumper work, blasting work, hard and soft blasting, saturator soil including chiseling or any other mixed variety of soil, lift upto any heights, stacking the excavated soil for all heights from the edge of excavation and then returning the stacked soil in 15cm (Fifteen centimetre) layer when required into plinths sides of foundations etc. Consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as directed by the Engineer- Incharge, within all leads, lifts of materials and other incidentals. Rate inclusive royalty, malkana, toll tax, GST and any other taxes imposed by the government. |
| 82 | Providing and laying cement concrete 1:5:10 (One Cement isto Five Sand isto ten) graded stone aggregate 40mm (Forty millimetre) nominal size for bedding of pipes of the 150 mm (One hundred fifty millimetre) internal diameters, necessary form work and curing complete within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government. |
| 83 | Providing and fixinghigh pressure P.V.C spigot and socket soil, waste and ventilating pipe of Supreme/Finolex working pressure not less than 6.0 kg/cm2 (Six kilogram per square centimetre) I.S.IMarked including fixing with approved adhesive etcetra complete including carriage of material within all leads, lifts and other incidentals. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government. |
| 84 | 75 mm ( Seventy five millimetre) |
| 85 | 110 mm ( One hundred ten millimetre) |
| 86 | 150 mm ( One hundred fifty millimetre) |
| 87 | Providing and fixingPVC single Equal Branch with oval access door ISI Marked of Supreme/ Finolex with insertion rubber washer 3 mm (Three millimetre) thick bolt and nuts complete including fixing with approved adhesive etcetra Complete including carraige of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government. |
| 88 | 75 mm ( Seventy five millimetre) diametre |
| 89 | 110 mm ( One hundred ten millimetre) diametre |
| 90 | Providing and fixing 110x90 mm (onehundred ten into ninety millimetre) PVC Floor TrapISI marked self cleaning design including fixing with approved adhesive cost of cutting and making good the walland floor complete within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 91 | Constructing masonry Chamber 60x60x75cm (Sixty into sixty into seventy five centimetre) inside, in brick work in cement mortar 1:4 (One cement isto four coarse sand) for sluice valve, with C.I. surface box 100mm (One hundred millimetre) top diameter, 160 mm (One hundred sixty millimetre) bottom diameter and 180 mm (One hundred eighty millimetre) deep ( inside) with chained lid and RCC top slab 1:2:4 (One isto two isto four) mix (One cement isto two coarse sand isto four) 20mm (Twenty millimetre) nominal size graded stone aggregate including necessary excavation, foundation concrete 1:5:10 (One cement isto five sand isto Ten)40 mm nominal size (Forty millimetre) graded stone aggregateand inside plastering with cement mortar 1:3 (One cement isto three coarse sand) 12 mm (Twelve millimetre) thick, finished with a floating coat of neat cement complete as per standard design complete within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
