|
| 1 | Demolition of brick work or stone / boulder masonry,built in cement mortar, including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles etc complete, all as specified. |
| 2 | Demolition of cement concrete (unreinforced) in ground floor and in pavingsnot exceeding 15 cm thickness (below or aboveground level) complete, all as specified. |
| 3 | Demolition of RCC water tank of capacity 500ltrs capacity over roof including making good surface of roof with PCC 1:2 :4 and plaster and through away the debris from the site including speration of rusted iron complete all as specified and directed. |
| 4 | Taking down chowkats or frames including shutters (without taking off shutters from the frames) not exceeding 1.50 Sqm eachand removing from site, complete all as specified. |
| 5 | Taking down chowkats or frames including shutters (without taking off shutters from the frames)exceeding 1.50 Sqm and not exceeding 4 Sqm each,and removing from site, complete all as specified. |
| 6 | Taking down shutter of any description exc 1 sqm but n. exc 2 sqm each. |
| 7 | Dismantling of floor hearth or wall tiling including cement mortor bedding(but not backing) removing serviciable tiles to store and rubbish off the premises |
| 8 | M&L for 25mm thick PCC type B-0 1:2:4, using 12.5mm graded crushed stone aggregate as in flooring to receive tiles etc complete all as specified and directed. |
| 9 | M&L for Glazed ceramic coloured tiles 300 mm x 600 mm x 6 to 7 mm thick as in vertical surfaces such as skirting dado etc set and jointed in neat cement slurry,pointed in white or coloured cement to matchover and including 10 mm thick renderingin CM 1:4 to receive tiles,complete all as specified and directed. |
| 10 | M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over15 mm thick screed bedin CM 1:4,complete all as specified and directed. |
| 11 | All as per item No 10 above but as in skirting/dado laid over 10 mm thick backing coatin cement mortar 1:4 complete all as specified and directed. |
| 12 | M&L for non skid ceramic tiles 8 to10mm thick (square/rectangle) area of each tile exc 0.06sqm but not exc 0.11 sqm, in floors and scantling etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 13 | M&L for Granite 18 to 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl 15mm thick screed bed in CM 1:4 including notching to the ends of granite and making holes for inserting the gas pipe complete all as specified and directed. |
| 14 | M&L for 2nd class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face venneers: supplied, 35 mm thickfitted to chowkats, complete all as specified and directed. |
| 15 | S&F 40 mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 16 | M&L for Pressed steel frames of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer andtaring back side of frame, complete all as specified. |
| 17 | M&L for Steel windows / ventilators (double leaf, gauge and glazed) with side hung shutters including projecting type hinges with steel handle and steel peg stay, complete with glazing bars dove tailed or welded, complete all as specified. |
| 18 | M&L for Factory made solidpanel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC \" C\" channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rails and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to in stiles & rails with suitable PVC sheet beading and joinned together with solvent cement supplying & fixing in frames at site as per specification and drawing shown in SSR Part -II, complete all as specified. |
| 19 | M&L for Solid PVC door frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supply & fixing in opening as per specification & drawing shown in SSR Part-II, complete all as specified . |
| 20 | S&F for Aluminium, anodised, barrel tower bolts of extruded section, 200mm long, complete all as specified. |
| 21 | S&F for 300 mm size aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified. |
| 22 | S&F for Mild steel cold rolled Butt hinges, medium weight, 100 mm long, complete all as specfied. |
| 23 | S&F for Aluminium handles, cast type, anodised of size 150 mm long, complete all as specified |
| 24 | S&F MS work as in hold fast etc conforming (Fe-290 Gde-165) complete all as specified and directed |
| 25 | M&L for floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, 150mm overall length of cover plate, fixed in floor complete all as specified and directed |
| 26 | S&F Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixedwith tinned tacks or galvanised wire staples complete all as specified and directed |
| 27 | M&L for PCC type B-0 (1:2:4) as in filling of steel chowkats or frames complete all as specified and as directed by Engr-in-charge. |
| 28 | S&F framed work such as grills, grating, guard bars etc. and similar works conforming to Fe-290 Gde-E 165 complete all as specified and directed. |
| 29 | S&F stainless steel curtain rod 25mm dia incl side clamps and single/double brackets, stopper etc,as in repairs including end bushes complete all as specified and directed |
| 30 | S&F Roof tubular trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, chaneel or flat section) including distance pieces, cleats etc conforming to Fe 290 (Gde E-165) complete all as specified and directed by Engr-in-Charge. |
| 31 | S&F Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment (Fe-410W, Gde E-165, Qlty-A) complete all as specified and directed |
| 32 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 33 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 34 | S&F Plain, galvanished, mild steel sheeting of 1.00mm thickness, with grade of zinc coating 275 including welded or soldered joints are provided for fixing of water tanks etc complete all as specified and directed |
| 35 | M&L Providing, cement concrete type C1 (1:3:6) in cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided |
| 36 | M&L for 75 mm thick cement concrete type C-2, 1:3:6 (using 20mm graded aggregate) as in plinth protection finished fair & even without using extra cement, complete all as specified. |
| 37 | Taking down cement plaster, any description, on brick or stone walls, etc. including raking out joints hacking for key, scrubbing down with water etc. complete all as specified and directed. |
| 38 | Rendering 15 mm thick cement plaster 1:6, on stone masonry surfaces other than fair face of brick work or on one side lathing and finishing the surface even and smooth w/o using extra cement complete all as specified and directed. |
| 39 | Rendering 10mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces of walls, finished even and fair without using extra cement, complete all as specified and directed. |
| 40 | Rendering 5mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces of ceiling, finished even and fair without using extra cement complete all as specified and directed. |
| 41 | M&L for preparation of newly plastered surfaces of walls including preparationand applying two coat of distemper oil emulsion washable on new surface over a coat of primer on walls over a coat of wall care putty all as specified and as directed. |
| 42 | M&L for preparation of newly plastered surfaces of walls including preparationand applyingtwo coats of weather coating external emulsion (APEX) over a coat of primer on walls complete all as specified and as directed. |
| 43 | Peparation of newplastered or unplastered surfaces of ceiling and applying three coats of white washcomplete all as specified and directed. |
| 44 | Complete removal of existing treament from old plastered or unplastered surfaces of wallsand applying two coats of Oil bond distemper over a coat of primer on walls over a coat of wall care putty all as specified and as directed. |
| 45 | M&L for complete removal of existing treatment from external walls and applying two coats of weather coating external emulsion (APEX) over a coat of primer complete all as specified and directed. |
| 46 | Peparation of oldplastered or unplastered surfaces of ceiling and applying two coats of white washcomplete all as specified and directed. |
| 47 | M&L 4 mm thick sheet glass ordinary quality, and glazing with oil putty or wooden beads in squares n.exc 0.50 Sqm in each pane, complete all as specified and directed. |
| 48 | M&L 4 mm thick figured glass pin head type and glazing with oil puttyin squares not exceeding 0.50 Sqm in each pane, complete all as specified and directed. |
| 49 | Prepartion of new wooden surfaces of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed. |
| 50 | Preparation of new steel surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chromeprimer, complete all as specified and directed. |
| 51 | M&L for preparation of old painted surfaces of wood and wood based materials of any description not other wise described over 10 Cm width or girth and applying one coat of Synthetic Enamel paint including filling of holes by filler (fevicol and wooden dust) complete all as specified and as directed. |
| 52 | Taking up/down steel tubing and connections including cleaning for refixing or removal to store 15mm bore pipes complete all as specified and directed |
| 53 | S&F Steel tubes, 15 mm bore, galvanised, \"medium grade\" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work etc, complete all as specified and directed. |
| 54 | Taking up/down steel tubing and connections including cleaning for refixing or removal to store 20 mm bore pipes complete all as specified and directed |
| 55 | S&F Steel tubes, 20 mm bore, galvanised, \"medium grade\" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor incl cutting chases for concealed work etc, complete all as specified and directed. |
| 56 | S&F Rotational moulded polyethylene water storage tank 500 Ltrs capacity, ISI marked (cylindrical vertical with closed top), triple wall layer construction, hoisted and fixed in position complete including 20mm dia ball brass valves high pressue with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed complete all as specified in SSR Part-I, |
| 57 | M&L for bib tap, cast copper alloy with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe, 15 mm bore (fixed in repair), complete all as specified and directed. |
| 58 | M&L for 15 mm bore angle cock, cast copper alloy,screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or union (fixed in repair), complete all as specified and directed. |
| 59 | M&L for 15 mm bore stop valves, cast copper alloy,screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or union (fixed in repair), complete all as specified and directed |
| 60 | M&L for 20 mm bore stop valves, cast copper alloy,screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union (fixed in repair), complete all as specified. |
| 61 | M&L for Vitreous china squatling pan water closet, orissa pattern, size 580 x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including PVS (SWR) \"S\" trap,provn of lime concrete and jointing to flush pipe (fixed in repair), complete all as specified and directed |
| 62 | S&F 10 litre capacity PVC, low level, valveless, syphonic action type flushing cistern, inlet ball valve, float valve, handle andfixing arrangement, 32 mm dia PVC flushing pipe upto 1 mtr length and 15 mm dia 450 mm long PVC connection with PTMT waste coupling (fixed in repair),complete all as specified and directed |
| 63 | S&F Looking mirror of size 600mm x 450mm bevelled edge mirror of selected quality glass 5.5mm thick, mounted on 6mm thick AC building board or commercial ply wood with PVC or aluminium \"C\" channel beading all around and fixed to wooden plugs with chromium plated brass screws and cup washer, (fixed in repair), complete all as specified and directed |
| 64 | S&F Tubular towel rail, 20 mm dia, 60 cm long, chromium plated with a pair of brackets, fixed to wall with CP brass screw and PVC rowl plugs (fixed in repair), complete all as specified. |
| 65 | S&F stainless steel Hat and coat hooks made of 5 to 6 Nos hooks for hanging of clothes, solid body complete all as specified and directed |
| 66 | S/F PVC ( SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors/wall 110 mmmm dia complete all as specified and directed |
| 67 | S/F PVC ( SWR) pipes single socketed in any length with rubber ring joints,laid in trenches or in floors/wall 75 mmmm dia complete all as specified |
| 68 | S/F 75mm PVC (SWR) floor trap, plain with grating including jointing complete all as specified and directed |
| 69 | S/F 110mm PVC (SWR) junction single, bends complete all as specified and directed |
| 70 | S/F 110mm PVC (SWR) junction single, bends with access door type complete all as specified and directed |
| 71 | S/F 75mm PVC (SWR) junction single, bends complete all as specified and directed |
| 72 | S/F 75mm PVC (SWR) bends with access door type complete all as specified and directed |
| 73 | S/F 110mm PVC (SWR) vent cowl complete all as specified and directed |
| 74 | M&L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement |
| 75 | S/F 75mm PVC (SWR) floor trap, plain with stainless steel grating including jointing complete all as specified and directed |
| 76 | M&L for brick work with sub class \"B\" bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:6 complete all as specified and directed |
| 77 | Demolition of mud in roof any thickness whether full thickness removed or part thereof including plaster and leaping complete all as specified and directed. |
| 78 | Dismantling of brick or terracing tiles of single layers on roofs incl cleaning of bricks/tiles and removal of unusable bricks/tiles and removal from site complete all as specified and directed. |
| 79 | Wire brushing and cleaningthe roof surfaces with water including flashings and junction of parapets complete all as specified and directed. |
| 80 | M&L Providing cement concrete type B1, 1:2:4 (20mm graded aggregate) 40mm thick as inpadding on roofs, flooring and chajja etc complete all as specified and directed. |
| 81 | M&L for 15mm thick Renderingon brick or concrete surfacein CM (1:4) roof surfaces, finishedeven and smooth without using extra cement. |
| 82 | M&L for cleaning the surface to remove all dust, dirt etc including Priming the surface with one coat ofSmartcare Bituminous primer of Asian Paints/ equivalent to enhance the bonding properties. Providing and laying of protective Geotextile fabric 45GSM over the bituminous primer application with proper overlaps. Supplying and applying single component, elastomeric, pitch modified PU coating Smartcare Flexiseal PU or approved equivalent with minimum elongation of 600% and tensile strength of 2 N/mm2 as per ASTM D412 and Shore A Hardness of 90 as per ASTM D 2240. The PU Coating shall have crack bridging ability of 2mm. The system consists of applying the water proofing treatment @ 1.2 Kg/ Sqm and shall have crack bridging ability of 2mm etc complete as per manufacturer\"s instructions. Over the two coats of Flexi seal PU Waterproofing application, applying and sprinkling silica sand material to the roof area, etc complete as per manufacturer\"s technical specification and as directed by Engr-in Charge. |
| 83 | M&L for providing heavy duty durastone (Caxton Brown/ Caxton Beige/ Deccan Natural/ Cresto Brown) outdoor vitrified tile of size 300 x 300mm x 10mm thick, of Make: Somany Digital or equivalent makes, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tile,laid over and including screed bed in CM (1:4) 15mm thick all as specified and directed. |
| 84 | All as per item No 83 above but in skirting/dado and including 10 mm thick renderingin CM 1:4 to receive tiles,complete all as specified and directed |
| 85 | M & L for plain cement concrete type-C2 1:3:6 (40mm garaded agg.) in surface channel and drains incl form work complete all as specified and directed. |
| 86 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, incl forms, moulds, mitred / stopped ends etc, complete, all as specified and directed. |
| 87 | Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in hard/dense soil, complete all as directed |
| 88 | M & L for hardcore broken stone or boulders of gauge not exc eeding 15cm thick, watered and rammed to a true surface complete all as spd and as directed |
| 89 | M&L for machine pressed precast concrete interlocking paver block any shape with grey cement & pigment and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Gradeincluding 30mm thick sand cushion layer complete all as specified and directed |
| 90 | M&L for providing plain cement concrete1:4:8 type D2, using 40mm graded stone aggregate as in foundations, filling and mass concrete all as specified and as directed. |
| 91 | Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm all as specified and as directed. |
| 92 | Removing excavated materials not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting points (soils). |
| 93 | Excavating in trenches not exceeding 1.50 mtr wide and not exceeding 1.50 mtr in depth for foundation etc and getting out in hard /dense soil all as specified and as directed. |
| 94 | Taking down carefully old existing Un-Serviceable Al/Copper batten/surface conduit/concealed conduit point wiring (light/exhaust fan/socket/call bell/ Power point) complete including (fittings and fixtures such as switches, ceiling roses, shades, brackets, sockets, holders, light fittings, call bells, Fluorescent tube light fitting) removing the Un-Serviceable retrieved materials from site making good the disturbed surfaces of walls/floors/ ceilings etc. complete all as specified and directed by Engr-in-Charge. |
| 95 | Taking out unserviceable PVC insulated/sheathed sub main wiring with 2 single corealuminium conductor cable of size upto 10 Sqmm on wooden batten/PVC conduits complete with battens/conduits and shall be removed from site and making good the disturbed surfaces of wall complete all as specified and directed by Engr-in-Charge. |
| 96 | Disconnecting/dismantling of old existing un serviceable DB\"s any way 240/415 Volts with their old/un serviceable burnt MCBs complete all as specified and directed by Engr-in-Charge. |
| 97 | M&L for point wiring with 1.5 Sq mm, PVC insulated, FRLS,single core, copper conductor cable, 1100 Volt grade, multi stranded drawn through and including medium grade Rigid non metalic PVC conduit conealed in wall/ceiling/roof etc with all necessary accessories for the following controlled by one switch with and includingcontinuous 1.5 Sqmm PVC insulated single core copper conductor cable earth continuity conductor connected to common earth and earth dolly, in the modular flush boxes etc. complete all as specified and directed by Engr-in-Charge.Make of cable: Havells/Finolex/Polycab and Make of conduit: Precision/Finolex/Modi/Bajaj plast.Note: (i) The wiring shall be done in proper color coding using red,yellow,blue for phases, black for neutral and green for earth. (ii) The cost of cutting chases and making good the disturbed surfaces is deemed to be included in the unit quoted rates.(iii) Modular flush boxes will be measured & paid seperately |
| 98 | a) One light/fan/call bell point controlled by one switch |
| 99 | b) One5 amps 5 Pin socket outlet on independent board |
| 100 | All as per Item No-97 above but with PVC insulatedcopper conductor cable of size 2.5 Sqmm and 2.5 Sqmm for earth continuity conductor for 16A switch socket.Note: (i) The wiring shall be done in proper color coding using red,yellow,blue for phases, black for neutral and green for earth (ii) The cost of cutting chases and making good the disturbed surfaces is deemed to be included in the unit quoted rates.(iii) Modular flush boxes will be measured & paid separately. |
| 101 | NOTEfor Item Nos 97 & 100) Modular metal flush boxes shall be measured & paid separately.2) Cutting chases & making good the disturbed surfaces is deemed to be included in the unit quoted rates. |
| 102 | M & L for concealed sub-main wiring alongwith earth wire of size (2 x 2.5) sq. mm + (1 x 2.5) sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC conduit (medium grade) with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors etc. complete all as specified & as directed. Make of cable : Havells/Polycab/Finolex, Make of conduit-Precision/Bajaj plast/finolex.NOTE : 1) Two runs of PVC wire, one run of earth wire & one run of PVC rigid conduit (medium grade) will be measured as one length. 2) Modular metal flush boxes (if req) shall be measured & paid separately. |
| 103 | S & F Modular switch, one way, 10Amp, 1 Module, 240 volt complete all as specified and as directed. Cat No : ACVSXXW101, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma |
| 104 | S & F Modular Bell Push switch, one way, 10 Amp, 1 Module, 240 volt complete all as specified and as directed. Cat No : ACVSBXW101, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma |
| 105 | S & F Modular switch, one way, 16 Amp, 1 Module, 240 volt complete all as specified and as directed. Cat No : ACVSXXW161, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma |
| 106 | S & F Modular shuttered socket outlet 3 Pin, 6 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed. Cat No : ACVKSWW063, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma |
| 107 | S & F Modular shuttered socket outlet 3 Pin, 6/16 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed. Cat No : ACVKCWW163, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma |
| 108 | NOTEfor Item Nos 102 & 107) Design/Drawing/Technical catalogue/specifications along with comparative Rate Analysis to be submitted to the Engr-In-Charge for Make/Sample approval of items whereever equivalency of Item(s) is concerned other than specified Make/Model/Cat/Part Ref concerned. |
| 109 | Supply & Fixingand concealing modular metal flush boxsuitable for fixing switches/sockets of 1/2 modules all as directed. Cat No : ACTXMIIX01/02, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma |
| 110 | Supply & Fixingand concealing modular metal flush boxsuitable for fixing switches/sockets of 3 modules all as directed. Cat No : ACTXMIIX03, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma |
| 111 | Supply & Fixingmodular cover platesuitable for fixing switches/sockets of 1/2 modules all as directed. Cat No : ACVPPCWV01/02, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma |
| 112 | Supply & Fixingmodular cover platesuitable for fixing switches/sockets of 1/2 modules all as directed. |
| 113 | Supply & Fixingmodular cover platesuitable for fixing switches/sockets of 3 modules all as directed. Cat No : ACVPPCWV03, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor |
| 114 | NOTEfor Item Nos 109 & 113) The make/model of modular metal flush boxes & modular cover plates shall be same as that of modular switches & sockets. |
| 115 | S&F ceiling rose surface PVC/ Polycarbonate, Isolated body with face Bakelite three terminal complete all as specified and directed. Make: Havells/CG/Anchor |
| 116 | S&F in repairs call Bell, AC, Bul bul chime type 230 Volt.Make: Anchor, Code-8432 or techno-commercially equiv in Legrand/Havells |
| 117 | S&F Surface and wall mounted LED batten 10 watts 2 feet long, extruded aluminium housing providedfor efficient heat dissipation & integrated electronic driver including connecting up with and including twin/three core twisted flexible cable of suitable size in flexible conduit all as specified and as directed incl taking down old/unsv fittings. Make : LUKER, Cat No:LT510P or techno-commercially equiv In Jaguar/Philips |
| 118 | S&F Surface and wall mounted LED batten 24 watts 4 feet long, extruded aluminium housing providedfor efficient heat dissipation & integrated electronic driver including connecting up with and including twin/three core twisted flexible cable of suitable size in flexible conduit all as specified and as directed incl taking down old/unsv fittings. Make : LUKER, Cat No:LT5M24 or techno-commercially equiv In Jaguar/Philips |
| 119 | S&F IP >= 66, IK>=07, Class I Environment friendly, energy saving, surface mounted, decorative bulk head edge lit LED luminaire 10Wwith min 800 lumens made of pressure die cast aluminium housing with suitable fixing arrangement complete with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed incl taking down old/unsv fittings. Make : Havells, Cat No HEXAFT10WLED857SSYMBOPC or techno-commercially equivalent in Philips/Jaguar |
| 120 | Supply and fix energy saving high power LED building security light of 25W made up of pressure die cast aluminum housing with embedded PC cover having top opening, seperate driver compartment with IP66 protection, IK-09 and making electric connections in flexible conduit with & incl GI Pipe bracket of appropriate dia & necessary fixing arrangements like clamps, nuts, bolts, washers etc. complete all as specified & as directed incl taking down old/unsv fittings. Make: Cat No ENDURAPEARLSL25WLED757SASYTOPCMP of Havells or techno-commercially Equivalent in Jaguar/Philips |
| 121 | S&F decorative wall mounting fixture luminaire with PC diffuser suitable for lamps with B22 with all accessories internally prewired and including connecting up complete all as specified and as directed. Make: Havells, Cat No:LHFOECE1TZ1O014, Model - Styloor techno-commercially equivalent in Philips/Jaguar |
| 122 | Supply and fixing in repairs LED lamps of the 10W, 6500K with B-22 base cap all as directed by the Engr-in- Charge Make : Havells//Jaguar/Philips |
| 123 | Supply, install, testing & commissioning of Exhaust fan, PVC body with connected accessories 250 mm sweep, single phase, 240 Volts, AC, 50 Hz, noise level less than 45 dB and connecting up complete including louvers and provision of cable 3/2 core of suitable size from ceiling rose to fan in flexible hose and making of suitable sized hole in the wall/existing window/ventillator etc. for fixing of the exhaust fan & making good the disturbed surfaces (if any) complete all as specified & as directed. Make : Havells, Cat No: Ventil Air DX or techno-commercially equivalent in Usha/Crompton. Note :- (i) The cost of making hole in walls/other surfaces & making good the disturbed surfaces incl any framework/cement work/wood work/welding work etc. required for proper fixing of the exhaust fan & matching to the existing surface is deemed to be included in the unit quoted rates |
| 124 | S & F SPN DB, 4 Way, IP43, IK09, Metal double door type 240 volts fitted with busbar and blanking plates, neutral link and making good making good the disturbed surfaces with all other accessories including necessary connection all as specified and directed by Engr-in-Charge.Make: L&T, Cat No: DBSPN004DD or techno-commercially equiv in Legrand/Siemens |
| 125 | S&F MCB, SPN, C-Series 240 Volts of capacity 6-32 Amps with breaking capacity 10 KA all as specified and dircted by Engr-in-Charge. Make-L&T, Cat No-BB20320C or techno-commercially equivalent in LEGRAND/SIEMENS. |
| 126 | S&F MCB, SP, C-Series 240 Volts of capacity 6-32 Amps with breaking capacity 10 KA.Make-L&T, Cat No-BB10320Cor techno-commercially equivalent in LEGRAND/SIEMENS. |
| 127 | Imp Note for Item Nos (116 to 126) Design/Drawing/Technical catalogue/specifications along with comparative Rate Analysis to be submitted to the Engr-In-Charge/GE for Make/Sample approval of items whereever equivalency of Item(s) is concerned other than specified Make/Model/Cat/Part Ref concerned before placing order to the Manufacturer/Supplier. 2) Anything missed out in the technical specifications but technically required for efficient working is deemed to be included in the quoted rates. |
| 128 | M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6.0mm thick buried directly in ground (in vertical position) earth pit not less than 2.25 mtr below normal ground level with the top edge of the earth plate not less than 1.5 mtr (B.G.L.) and connected to galvanized iron wire 4 mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron including PCC pit & cover with suitable handle including necessary excavation and earth work in any type of soil, 20 mm dia med grade galvanized steel tube for watering with one end fixed with funnel and wire mesh, 15 mm bore medium grade galvanized steel tubing for drawing earth lead GI strip protection & common salt, charcoal in alternate layers etc. incl taking down old unsv earthing complete all as shown in EP No 3 of SSR Part 1 and testing on completion complete. Make of GI Pipe : TATA/Jindal/Prakash |
