Tamil Nadu Generation And Distribution Corporation Limited-TANGEDCO has published Repair And Maintenance Works To The Barricade Gate And Providing Speed Breaker In Pch 1 At Ichs Area. Submission Date for this Tender is 10-08-2022. Barricades Tenders in Tuticorin Tamil Nadu. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 04-Aug-2022 | EXEMPTION OF EMD- REGARDING | Other | 10-08-2022 |
| Sl. No. | Item Description |
| 1 | Earth work excavation in all soils such as sand, silt or other loose soil, wet sand or silt not under water, light black cotton soil, sandy loam and ordinary soil and depositing on bank with an initial lead of 10m and initial lift of 2m and disposing the excavated earth 2Kms. away from the site including cost of all materials, labours, lead, lift, etc. complete. |
| 2 | Dismantling the existing worn out / corroded /damaged angle, channel & beam carefully without damaging the other existing steel structure as directed cutting to suitable size for easy transportation stacking & devoluting to stores. rate including for hire charges for cutting set, cost of oxygen and acetylene gases including devolution of stores with all labour, lead, lift, safety appliances, transporting etc., complete. |
| 3 | Labour charges for cutting, welding, fabrication & laying in position of the MS boiler tubes / MS Platesincluding cost of labour charges, cutting, fabrication charges, lead, lift, etc., complete. (M.S Scrap will be supplied by Dept. at free of cost). |
| 4 | Providing PCC 1:2:4 using OP/PP cement with 40mm size machine crushed HBG metal including cost of all materials, labours, lead, lift, curing, etc. complete. |
| 5 | Brick work in CM 1:5 using class II bricks including cost of all materials, labours, lead, lift, curing, etc. complete. |
| 6 | Plastering with C.M 1:5, 12 mm thick including cost of all materials, labours, lead, lift, curing, etc. complete. |
| 7 | Providing two coats of snowcem painting of approved colour & quality on new outer walls over one coat of white primer, including cost of all materials, scaffolding charges, labours, lead, lift, curing, etc. complete. |
| 8 | Road Marking with Hot Thermoplastic compound with reflected Glass Beads on Bituminous surface. |
| 9 | Painting two coats with ready mixed enamel paint for the new steel surface with primer including cost of all materials, labours, lead, lift, etc. Complete. |
| 10 | Providing RCC 1:1.5:3 using OP/PP cement with 12mm to 20mm machine crushed HBG metal including cost of all materials, labours, lead, lift, curing, etc. complete - excluding cost of reinforcement and form work. |
| 11 | Supplying & providing Steel reinforcement including cutting, bending, tying & fixing in position as per specification including binding wires, cost of all other materials, labours, lead, lift, curing, etc. complete. |
| 12 | Providing centering and shuttering for supporting the reinforced cement concrete surfaces rate including cost of all materials, labours, lead, lift, etc. complete. |
| 13 | Providing and erecting of Retro - Reflectorised Cautionary, Mandatory and Informatory signs (with definition board) made out of High Intensity Prismatic Grade Sheeting confirming to Type-IV standards of IRC-67: 2012 and ASTM D 4956-09, specification and fixed over 2mm thick Aluminium sheet fixed over a back supporting frame of 25mmx25mmx3mm Mild Steel angle and supported on a mild steel angle post 75x75x6mm with a clear height of not less than 2.10m from the ground level to the bottom of the sign board 0.60m below ground level. The sign spot should be painted as per IRC 67-2012 and firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cmx45x60cm size including cost and conveyance of all materials, equipment, Machinery and labour with all leads and lifts, loading charges necessary for satisfactory completion of the work as directed by the engineer in charge. High intensity Retro - Reflectro sheet shall consist of minimum coefficient of Retro - reflection as per Table 6.6 of IRC 67-2012. The retro - reflective sheeting shall be covered under 7 year warranty issued for field performance and a certified copy of three years outdoor exposure report shall be obtained as per IRC 67:2012. ( as per MORT&H Specification) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
