Military Engineer Services-MES has published Replacement Of Ac Sheet Roofing With Galvalume Sheet, Provn Of False Ceiling, Misc Works In Bldg No T-34 At Ge Guwahati And Provision Of Electric Meter In Offrs Guest Room At Transit Camp Under Ge Guwahati R. Submission Date for this Tender is 30-08-2022. Shed Construction Tenders in guwahati Assam. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 30-Jul-2022 | Date Corrigendum_1 | Date | 23-08-2022 |
| 2 | 03-Aug-2022 | Amendment to Tender Documents | Other | 23-08-2022 |
| 3 | 03-Aug-2022 | Revised BOQ | BOQ | 23-08-2022 |
| 4 | 03-Aug-2022 | Amendment | Fee | 23-08-2022 |
| 5 | 06-Aug-2022 | Amendment to tender documents_2 | Other | 23-08-2022 |
| 6 | 06-Aug-2022 | Amendment to BOQ | BOQ | 23-08-2022 |
| 7 | 06-Aug-2022 | Amendment to Fee Details | Fee | 23-08-2022 |
| 8 | 18-Aug-2022 | Amendment to tender documents | Other | 23-08-2022 |
| 9 | 23-Aug-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 30-08-2022 |
| Sl. No. | Item Description |
| 1 | Demolition of Brickwork masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as directed. |
| 2 | M&L Brickwork with sub class ‘B’ bricks straight or curved on plan exc 6 mmean radius built in cement mortar 1:6 complete all as specified and directed. |
| 3 | M&L for Brickwork with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and as directed. |
| 4 | DismantlingAsbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as directed. |
| 5 | S&F Pre-painted galvatume aluminum zinc coating GI based corrugated/Semi corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 6 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 7 | Cutting chases in brick wall, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girthcomplete all as specified and as directed. |
| 8 | Dismantling wrought iron or mild steel work of any description not otherwise provided for cement complete all as directed. |
| 9 | M&L Rolled mild steel as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe. 410W.Gde-E-250 Qualty A, including one coatof red oxide, zinc chrome primercomplete all as specified and as directed. |
| 10 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as directed. |
| 11 | S&F Anodised aluminium snap grid frame work for false ceiling, Size of grid 605 x 605mm, comprising of Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, including15mm thk Mineral fibre acoustic suspended ceilig board fixed or laid/ inserted to GI framework with screws complete all as per manufacturer’s instructions andas specified and directed . |
| 12 | S&F mild steelBands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed. |
| 13 | Taking down cement plaster on wall & ceiling of any description including racking out joints, hacking for key and scrubbing down with water etc complete allas directed. |
| 14 | M&L for 15mm thick rendering with cement mortar (1:4)on fair faces of brick work in two layers (10mm&5mm)seperately mixed with water proofing compound in top layer as per manufacturer"s instructions and finishing the surface even and smooth without using extra cement complete all as specified and as directed. Note:- WPC shall be measured and paid seperately under appropiate item. |
| 15 | Supply only liquid water proofing compound complete allas specified and as directed. |
| 16 | M&L Rendering 10 mm thick on other thanfair faces of brick work or concrete surfaces in cement mortar 1:6 for finished even and fair complete all as specified and as directed. |
| 17 | M&L prepration of new plastered surfaces ofwall applying two coat of oil emulsion distemper overa coat of primer including 1.5mm thick (minimum) wall care putty to obtained smoothness of plastered surfacescomplete allas specified and as directed. |
| 18 | M&L preparation of old plastered surfaces ofwall applying two coat of oil emulsion distemper overa coat of primer including 1.5mm thick (minimum) wall care putty to obtained smoothness of plastered surfacescomplete allas specified and as directed. |
| 19 | M&L preparation of old plastered surfaces ofCelings applying two coat of oil emulsion distemper overa coat of primer including 1.5mm thick (minimum) wall care putty to obtained smoothness of plastered surfacescomplete allas specified and as directed. |
| 20 | M&L prepration of new plastered surfaces ofwalls and applying two coats of cement base paint over a coat of primer complete all as specified and directed. |
| 21 | M&L preparation of old plastered or unplastered surfacesof walls by scrubbing down using electric sander machineor steel wire brushing scrapping down smokes soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of cement base paint complete all as specified and directed. |
| 22 | M & L providing plain cementconcrete type C-1, (1:3:6), (using 20 mm graded stone aggregate), as in copings, bed block for filing hollow space of steel chowkhats, fixing of hold fast, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed. |
| 23 | M&L preperation of new steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats syntheic enamel paint complete all as specified and as directed. |
| 24 | M&L preperation of old steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying one coats syntheic enamel paint complete all as specified and as directed. |
| 25 | Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5 Sqm each. complete all as directed. |
| 26 | Taking down chowkat with shutter without taking off shutter from the frame exc 1.5 Sqm n.exc 4 Sqm each complete allas directed. |
| 27 | M&L second class hardwood, Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed. |
| 28 | S&F Factory made second class hardwood 35mm thickPlain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treatedcomplete all as specified and as directed |
| 29 | S&F Factory made second class hardwood 35mm thickGlazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. |
| 30 | S&F 100mm size Butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and as directed. |
| 31 | S&F 150mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. |
| 32 | S&F 300mm aluminium alloy sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy fixed complete all as specified and as directed. |
| 33 | S&F 150mmlong Aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and as directed. |
| 34 | S&FFloor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor ,140mm Overall length of cover plate, complete all as specified and as directed. |
| 35 | M&L preparing new wooden surfaces of any description, not otherwise describe over 10cm width or girth and applyingtwo coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 36 | S&F Powder coated (minimum thickness of powder coating 50 micron) Anodised aluminium frame for doors, windows, ventilators, partitionswith one or more rebates including joining cleat for fixing etc. complete all as specified and directed Note:- Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed |
| 37 | S&F Powder coated (minimum thickness of powder coating 50 micron) anodised aluminium doors shutters including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, along with standard locking arrangements, handles, tower bolts etc as required. complete all as specified and directed Note:-(i) Labour charges for fixing of glass/wire guage is inclusive in the unit rate quoted. Glass/Wire Guage shall be measured and paidseperately at supply only rates (ii) Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed |
| 38 | Supply only Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminum window/ventilator shutters complete all as specified and as directed. |
| 39 | Supply only 4mm thick plain sheet glass, ordinary quality fixed with Aluminum frame work n. exc 0.5 sqm in each pane complete all as specified and as directed. |
| 40 | Supply, installation, testing and commissioning as in replacement of 01 phase , 02 wire, single source direct connected prepaid keypad based BIS marked IS-16444 Digital Energy meter,10-60 Amps, 240 Volts, accuracy class-1.0 with 4G/3G/GRPS based communication meter for remote reading purpose with Poly carbonate meter boxto generate ABC code (Authenticated Billing Code) for Monthly Energy usage bill generation , having LCD displaycaliberation LED, numeric key pad for token entry with RS 232communication port, LED for credit status indication, push button for scroll and having features for load disconnection in case the credit limit become zero or increase of load more than permissible limit, reconnection and disconnection of load, buzzer at Consumer interface unit to give alarm in case of low credit and overloading and data download port for last 25 days(minimum) temper event and load survey for last 45 days with all standard anti-temper features including sealing facility with three year compressive warranty including all extra connected item which are required for functioning of meter complete all as per manufacturer"s instructions including dismantling/taking out the existing energy meter of any description and depositing to MES store yard complete all as specified and as directed. Note:- (i) Cost of connecting to the existing sysyem and other connected items including 2 pair, 0.5mm annelead copper wire for connnection between meter and consumer interface unit, termination connector for 3 pair wire meter and CIU each set is deemed to be included in the UNIT RATE QUOTED. |
| 41 | Supply, installation, testing and commissioning and Implementation of vending system through server including required software, GSM SIM, data base defining, mapping of consumers and running the vending system for each meter for lifetime validity along with user manual for Two year and training cost of atleast 04 MES Personnel usersis deemed to be inclusive in the quoted rate. Note:- The cost of vending charges of all meters for three years after the above period shall be deemed to be included in the UNIT RATE QUOTED. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
