Ultrasonic Flaw Detector With Accessories Supply, Installation And Commissioning, Demonstration And Training Of Ultrasonic Flaw Detector Along With Standard And Additional Accessories As Per Annexure Enclosed. , Supply, Installation And Commissioning, Demonstration And Trainingof Ultrasonic Flaw Detector With Standard And Additional Accessories As Mentioned Below , Standard Accessories As Follows:-14.4 Volts / 4Ah Li-Ion Rechargeable Battery Pack , Battery Charger Cum Mains Power Pack With Charge Status Indicator & Power Cord , Special Leather Protective Case With Shoulder Sling And Waist-Strap , Plastic Moulded Foam Fitted Carrying Case With Numerical Lock For Storage And Transportation Of Complete Kit , Dgs: Transfer Software On Cd-Rom. , Eincord-1 : Data Card To Connected With Pc. , Illustrated Instruction Manual In English , Calibration Certificate As Per Astm E-317-06A Traceable To Npl-New Delhi , Additional Accessories As Follows:-Normalprobes ( 24 Mm Dia ) ( With Replaceable Protective Membrane ) Frequency Of 2.0, 4.0, 6.0 Mhz, Probe Angle 0 Degree, Connector Type Bnc , Miniature Normal Probes ( 10Mm Dia. ) ( With Replaceable Protective Membrane ) Frequency 2.0, 4.0 Mhz, 0 Deg, Connector Type Mini Lemo , Angle Probes ( 9 X 8Mm ) Frequency2.0Mhz 45, 60, 70Degree, 4.0Mhz 45, 60, 70 Degree, Connector Type Mini Lemo , Dual Crystal 2.0, 4.0Mhz 6 Deg Connector Type Mini Lemo , Probe Cable 2 Meters Connector Type Bnc To Bnc , Probe Cable 2 Meters Connector Type Bnc To Mini Lemo , Probe Cable 2 Meters Connector Type Dual Bnc To Mini Lemo , Probe Cable 2 Meters Connector Type Mini Lemo To Mini Lemo , Calibration Block Iiw Type Block- V1 , Calibration Block Iiw Type Block- V2 , Flat Bottom Hole As Per Astm E428 ( Consist Of 10 Pieces ) , 5 Step Thickness Gauge As Per Astm E 797 , Replaceble Protective Membranes Min Normal Probes Are 10 Mm Dia ( Consist Of 10 Nos ) , Normal Probes Of 10, 24Mm Dia ( Consist Of 10 Nos )
