Military Engineer Services-MES has published Addition Alteration To Recruit Living Barracks At 6 Ttr Ponda Goa . Submission Date for this Tender is 01-08-2022. Barrack Tenders in panaji Goa. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 25-Jul-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 01-08-2022 |
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing debries out side MOD land complete all as specified and directed. |
| 2 | M&L 50mm thick cement concrete 1:3:6 type C1 using 20mm graded stone aggregate, finishing the surface even and fair as in plinth protection and similar work. |
| 3 | Demolition of cement concrete (reinforced) of any type and in any position not otherwise specifically provided for and removing debries out side MOD land complete all as specified and directed. |
| 4 | M&L for RCC (Nominal mix) type B-0 using 1:2:4 12.50mm graded aggregate asin slabs supported on wall, beams and columnsin floors roofs, landing, balconies,canopies , deck slabs and in shelves etcand the like. |
| 5 | M&L TMT CRS steel bars 8mm dia, cut to length, bent to shape reqd and welded to existing reinforcement of any description and any position of RCC structure after binding with mild steel wire annealed n less than 0.9 mm dia. |
| 6 | M&L TMT CRS steel bars 10mm dia and over, cut to length, bent to shape requred, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. |
| 7 | Taking down chowkat/frame with shutters n exc 1.5 Sqm (without taking off shutters from the frame) & removing clear off site after the credit for the same is received by the dept |
| 8 | All as in item No. 7 above but exc 1.5 Sqm but n exc 4 Sqm each with shutters (without taking off shutters from the frame) |
| 9 | M&L 2nd class hard wood for Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints. |
| 10 | S&F 2nd class hardwood 35mm thick glazed and skeleton shutters(Factory made), open rebated and prepared to receive glass, gauze etc, (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.(Sizes of members of shuttersas specified in SSR Pt-I Section 8, clause 8.24(b). |
| 11 | S&F35mm thick (Factory made) 2nd class hardwoodplain framed, panelled shutter (two or three panel) with lock rail and panel of 9 mm BWP commercial ply or 12mm veneered particle board with commercial veneering onboth faces, the size of rail and stileas per IS 1003 (Part -I) kilnseasoned and chemically pressure treated. |
| 12 | S & F solid PVC door frames of size 50mm x 47 mm made out of 5 mm thick plain/printed coloured PVC sheet reinforced with MS square tube all as per specification & drg in SSR Pt II 2020 complete all as specified and directed. |
| 13 | S & F factory made solid panel PVC door shutter 30mm thick (styles) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC"C" Channel having a PVC sheet strip of 20mm width stuck inside with solvent cementfor styles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitten in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading & jointed together with solvent cement, complete all as specified and shown in drgs in SSR Pt II 2020 complete all as specified and directed. |
| 14 | S&F aluminium powder coated barrel tower bolts of extruded section 150 mm long. |
| 15 | S&F Aluminium alloy powder coated sliding door bolt 300 mm long with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy. |
| 16 | S & F 100mm long stainless steel butt hinges complete all as specified and directed. |
| 17 | S&F extruded aluminium alloy, fabricated type handle, 150mm long |
| 18 | All as per item No.17 above but 100mm |
| 19 | M&L for preparing new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer. |
| 20 | M&L for preparing old wooden surfaces of any description over 10cm width or girth and applying onecoat of synthetic enamel paint. |
| 21 | M & L for MS work as in bands, straps, clamps, hold fast, hinges etcand similar small articles conforming to Fe-290 Gde-E-165 |
| 22 | Cutting holes in brick/stone/concrete walls built in cement mortar for inserting hold fasts depth of embedded portion of hold fast n.exc half brick and making good the dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed. |
| 23 | M & L for cement concrete Type F2, 1:7:12 (using 40mm graded aggregate) in foundation filling and mass concrete, in sunken portions of WC and for filling cuttings holes created after removing hold fast of old windows, ventilators and doors etc in any position complete all as specified and directed. |
| 24 | S & F powder coated/anodised aluminium sections for doors, windows, ventilators, door partition including fabrication of frame shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc. including all accessories such as glazings clips, provn of AC opening and rubber beadings for fixing glass panes in frame complete all as specified by Engr-In- Charge. Note : (i) Glass panes will be measured & paid separately . (ii)The quoted rate shall be inclusive of cost of rubber beading and glazing clips,hinges, handle. However it will be not be weighed and not paid separately. (iii) All other minor details including cost of locking arrangement shall be included in the quoted rate. |
| 25 | S&F aluminum alloy wire mesh 0.45 mm nominal dia of wire and average widthof aperture 1.4mm cut to size and fixed to doors/window shutters and fixed with aluminium wire stapels complete. |
| 26 | S&F sheet glass ordinary quality, 4mm thick and glazing with oil putty/wooden beads in squaresexceeding 0.50 sqm each. |
| 27 | All as per item No.26 above butwith pin headed/figured glass nexceeding 0.50 sqm each. |
| 28 | M & L for Mild Steel framedworksuch as grills, gratings, etc withendsof barsshouldered and /orrivetedor forgedinto spikes, framed guard bars, framed work of garbage bin, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290 Gde 165 etc. complete all as specified and as directed by Engr-in-Charge. |
| 29 | M&L for making good jambs, forming jambs etc to openings for door and window opening including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work complete in cement mortar 1:6 |
| 30 | Demolition of stone slab and tiles of any description or thickness in floors, aprons etc. laid, bedded & pointed in mortar and removing debries out side MOD land complete all as specified and directed. |
| 31 | M&L for non skid coloured ceramic tile 7 to 8mm thick (square/rectangular), area of each tile exc 0.18 sqm but no.exc 0.38 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20mm thick screed bedding in cement mortar (1:6) |
| 32 | M & L for non skid coloured ceramic tile 7 to 8mm thick (square/rectangular), area of each tile exc 0.18 sqm but no.exc 0.38 sqm on vertical surfaces such as skirting and dados set and jointed in neat cement slurry pointed in coloured cement to match over rendering 10 mm thick on fair faces of brick work in CM (1:4) |
| 33 | M&L for non skid coloured ceramic tile 7 to 8mm thick (square/rectangular) area of each tile exc 0.11 sqm but no.exc 0.18 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cemrnt to matchover and including 20 mm thick screed bedding in cement mortar (1:6) |
| 34 | S&F glazed ceramic tiles 300 x 200 x 7mm thick coloured on vertical surfaces such as dado skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over rendering 10 mm thick on fair faces of brick work in CM (1:4) |
| 35 | M&L for machine cut kota stone slab for steps 20-25mm thick, laid and jointed with grey cement slurry mixed with pigments to match the shade of the slab including rubbing and polishing complete as in floors over and including 20mm thick screed bedding in cement mortar (1:6) . |
| 36 | M & L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick with grey cement of pigment, set, jointed and pointed in neat cement slurry in floors over and including 20mm thick screed bedding in cement mortar (1:6) |
| 37 | Taking down cement plaster of any description on brick or stone walls including racking ouit joint hacking for key, scrubbing down with water etc. |
| 38 | Applying layer of concrete 20mm thick comprises composition 50 Kg cement, 3 to 6mm chips 100kg & sand 50 Kg mixed with spray set SL 2 to 2.5% by weight of cement and 12.5 to 16.5 ltrs of water mixed with admixture incl bonding agent & applying rust remover and guniting with pressure nozzle with a delivery capacity of 2.5 Kg/Sqm. |
| 39 | Rendering the entire gunniting surface with 10mm thick in cement mortar 1:4, finished the surface even & smooth without using extra cement. |
| 40 | Supply only welded steel wire fabric, weight n.exc 4 kg/sqm |
| 41 | M&L for 15mm thick rendering in CM 1:6 on brick or concrete surfaces of wall , finished even and smooth without using extra cement. |
| 42 | M & L for applying two coat of oil emulsion distemper over a coat of chalk whiting as preparatoy to distemper including prepration of new surface or unplastered surfaces of wall with applying 3mm thick wall care putty complete all as specified and directed. |
| 43 | M & L for applying two coat of oil emulsion distemper over a coat of chalk whiting as preparatoy to distemper including prepration of old decorated surfaces of wall with applying 3mm thick wall care putty by complete removal of existing treatment complete all as specified and directed. |
| 44 | M & L for rendering 15mm thick plaster in cement mortar 1:4 on external surfaces such as stone or concrete surfaces with using water proofing compound& finished even and smooth without using extra cement complete all as specified and as directed. (Water proofing compound shall be measured and paid for separately) |
| 45 | M & L for preparing of new plastered surfaces of wall/ceiling by scrapping/rubbing and applying two coats of Acrylic weather proof exterior paint over a coat of acrylic primer complete including scaffolding complete all as specified and as directed by Engineer-in-Charge and as per manufacturers instructions. Make- (a) Asian Paint - Apex Ultima Protek. (b) Berger Paint - Weather coat smooth. (c) Nitco Paint - Outshine premium 100% acrylic exterior(d) ICI Dulux - Weather shield exterior. |
| 46 | M & L for preparation of old plastered wall surfaces including complete removal of existing treatment on wall and applying two coats of Acrylic weather proof exterior paint over a coat of acrylic primer complete including scaffolding complete all as specified and as directed by Engineer-in-Charge and as per manufacturers instructions. Make- (a) Asian Paint - Apex Ultima Protek. (b) Berger Paint - Weather coat smooth. (c) Nitco Paint - Outshine premium 100% acrylic exterior(d) ICI Dulux - Weather shield exterior. |
| 47 | Supply only liquidwater proofing compound all as specified. |
| 48 | Taking down PVC (SWR) pipes 75/110 mm bore from walls. |
| 49 | M&L UPVC pipe, SCH : 80, 75mm bore, single socketed, in any length with rubber ring joints, fixed to walls |
| 50 | S&F UPVC (SWR), SCH : 80, 110 mm bore, single socketed, in any length with rubber ring joints, fixed to walls |
| 51 | S /F UPVC (SWR) bends 75mm bore any radius dismantling pieces or tapers. |
| 52 | All as itemNo.51 above but 110mm bore |
| 53 | S &F UPVC (SWR) branch piece, single, (single Y) equal or unequal with access door, for 75mm bore pipes. |
| 54 | S &F UPVC (SWR) branch piece, single, (single Y) equal or unequal with access door, for 110mm bore pipes. |
| 55 | S &F UPVC (SWR) branch piece,double, (double Y) equal or unequal with access door, for 75mm bore pipes. |
| 56 | S &F UPVC (SWR) branch piece,double, (double Y) equal or unequal with access door, for 110mm bore pipes. |
| 57 | UPVC (SWR) gully trap 125/110 mm setting and jointing with solventcement |
| 58 | S &F in repairs Nahani traps CI 75mm dia with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) |
| 59 | S&F in repairs PVC connection 15mm size with PTMT nuts of length 600mm. |
| 60 | S&F in repairs towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and plastic cleats. |
| 61 | M&L waste coupling 32 mm dia (PTMT) fixed in repairs for glazed ware sinks, basins etc half or full threaded with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed for 32 mm bore. |
| 62 | S & F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 63 | Taking up or down steel water tubing 15mm bore and connections & removing clear off site after the credit for the same is received by the dept |
| 64 | All as in item No. 63 above, but 20mm bore pipe. |
| 65 | S & F CPVC water tubing outer dia 20mm, SDR-11 grade with all fittings and fixed complete to walls and ceiling or laid in floors. |
| 66 | All as in item No. 65 above, but 25mm bore pipe. |
| 67 | S & F in repairs chromium plated bib taps cast copper alloy, fancy type CP with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferule and fixed of size 15mm bore complete all as specified and directed. |
| 68 | S&F in repair Pillar taps, 15mm dia fancy typecast copper alloy, with capstan heads, chromium plated, screwed down high pressure, without lettered "Hot" or "Cold" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed |
| 69 | S & F in repairs, chromium plated 15mm borestop valves, cast copper alloy 15 mm bore fancy type CP screwed down high pressure with crutch or butter fly handle for iron pipe or for union and complete all as specified and directed. |
| 70 | S&F in repairs PVC low/high level flushing cistern, 10 Ltrs capacity including float valve, chain, PVC flush pipe. |
| 71 | S &F Stainless steel shower roses 100mm size, with or without swivel joint including fixing to steel pipe, fixed in repair. |
| 72 | Dismantling existing tank ( 500 ltrs) and S & F rotational moulded polyethylene double layer water tanks (vertical cylindrical with close top) as per IS 12701: 1996, hoisted and fixed in position all as specified in SSR Part -I (2000Ltrs) capacity complete all as specified and directed by Engineer- in-charge. |
| 73 | Dismantling single layer Mangalore pattern or similar tiles in roofiing |
| 74 | Dismantling plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof coverings. |
| 75 | Dismantling battens for tiles, shigles etc, spaced exc. 15 cm of any size including tiling fillets. |
| 76 | Dismantling timber in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and directed. |
| 77 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded in concrete brickwork and masnory portion and making good disturbed ground |
| 78 | Excavating in post holes (or similar holes) each n exc 0.5 cum in soft/loose soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surfaceall as directed |
| 79 | M & L for Cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) in foundations, filling and mass-concrete all as directed |
| 80 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugate steel sheet 0.50 mm thick of an colour having Tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 81 | Ditto all as item 82 above but plain steel sheet 0.5mm thick. |
| 82 | M&L 5mm thick PVC plain sheet as in eaves boards fixed with and including screws and iron frame work (Note:- iron work shall be measured and paid saperately) |
| 83 | S & F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat section) including distance pieces, cleats etc conforming to Fe 410-W(Gde-E-250) |
| 84 | S & F rolled sections as in main and cross beam hips and jack, rafters, purlins where connected to common rafters and running rail and guide for sliding doors fixed with angle cleatsFe 290-W(Gde-E-165) |
| 85 | S & F compound girders and stanchions, lattice girders, aerial masts, staging for water tank and like including cap and bases , splices etc built up from two or more beam or channel section or angle with plates including all lattice bars stifferners, gusset plate.Fe 290-W(Gde-E-165) |
| 86 | M & L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces of any description, over 10cm in width or girthcomplete all as specified and directed. |
| 87 | Dismantling wall and ceiling board or insulation board/ slabs/blankets any thickness including cover fillets |
| 88 | Supply and fix anodized aluminium snap grid frame work for false ceiling of grid size 605mm x 605mm with necessary main tee 35.00 x 23.50 x 1.50mm , crosstee and wall angle ofsize 23.50 x 23.50 x 1.5 mm, hangers of 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified directed. |
| 89 | M & L for 6mm thick non asbestos fibre cement building boards fixed or laid/ inserted to aluminium frame work with screws complete all as specified and directed. (Note:- Aluminium frame work s considerd under item no 90 above) |
| 90 | Dismantling of old 6mm thick ceiling boarding of any description, fixed in any position with screw and re-fixed in flat or sloping, 6mm thickasbestos cement plain building boards, fixed or laid/ inserted to timber frame or iron frame work with screws, hooks, belding, cliping etc complete all as specified and directed. |
| 91 | S & F in repairs PVC waste pipe of 32 mm size flexible and 1.2 mtr long, fitted to basin or sinkall as specified and directed. |
| 92 | S & F in repais vitreous china squatting pan "Orissa" pattern, of size 580mmx440mm white with integral foot rest with and including"P" or "S" trap, connection to trap and to flushing pipe, trap set in and including provision of lime concrete bedding and taking out old WC and connections etc complete all as specified and as directed |
| 93 | Demolition of brick work or stone/boulder masonary, built in cement mortar including all quoins,arches,pillars,etc and removing debries out side MOD land complete all as specified and directed. |
| 94 | M & L for walling laterite of squared rubble, regular coursed, well bonded, bedded and solidly hearted built in cement mortar 1:6 complete all as specified and directed by Engineer in charge. (Note -The rate consider is for laterite stone only as per section No.6 stone masnory para - 6.2.4 of SSR 2020) |
| 95 | M & L for 15mm thick plastering in CM 1:4 on external surfacesstone or concrete surfaces at any heightfinished even and smooth without using extra cement complete all as specified and directed. |
| 96 | Extra over stone walling for hammer dressing to face stone and dressing of face beds and joints, as specified, ofsquared rubble masonry regular coursed, hammer dressing with maximum depression on face from straight edge held against the dressed surface not exceeding 20mm complete all as specifed and directed |
| 97 | AGE E/M Taking down carefully copper/aluminium point wiring of light, fan, socket 5/15A or power point complete including fittings such as switches, ceiling rose, pendant, regulator, socket, lamp holders, brackets, lamp fittings, tube light fittings etc including switch boards and making good disturbed surfaces of wall/ceiling etc so as to match with the existing wall/ceiling/floors etc completely all as directed by Engr-in-Charge. |
| 98 | Taking down carefully sub main wiring including copper/aluminium/GI earth continuity conductor and making good disturbed surfaces all as directed of any sizes. |
| 99 | Taking down MCB DBs with MCBs of any size and capacty alongwith teadwood boards incl all fittings/furniturecarefully and making good disturbed surfaces of wall |
| 100 | M & L for point wiring with proper colour coding complete with and including PVC insulated, unsheathed, flexible, bright annealed multi stranded copper conductor single core FRLS cables 1.5sqmm 1100 volts grade drawn through and including heavygrade rigid PVC conduit 20mm or higher dia as required at site, totally concealed in walls /floors/ceiling and surfaces on trusse by means of saddles & clips etc including all conduit accessoriesc /fiitting/junction box/inspection covers etc of heavy grade, ISI marked and sunk terminal boxes of factory made 16SWG pressed steel housing, totally concealed in walls with 3mm thick industrial laminated sheet top cover, fixed flush with wall surface by means of brass screws and sunk/cupwashers, for mounting of switches, sockets, fan regulator etc including 1.5 sqmm 1100 volts grade PVC insulated FRLS, unsheathed flexible, multi stranded copper conductor cable as continious earth wire connected to metallic bodies of luminiaries/fan etc at one endto common earth dolly at other end,all as specified and directed :- (a) For one light point controlled by one switch. |
| 101 | (b) For oneceiling/exhaust fan, point controlled by one switch. |
| 102 | (c) For one 5Amp independent socket point controlled by one switch. |
| 103 | (d) For one 5A socket point controlled by one switch on same board |
| 104 | All as per item No 100 here-in-before but for power point wiring with 2.5 SqmmPVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable as continuous earth lead. |
| 105 | M & L for switch flush type single pole one way 5 Amps, 240 volts, white finish complete all as specified |
| 106 | M & L for switch flush type 15 Amps, 240 Volts single pole white finish complete all as specified. |
| 107 | M&L for socket outlet 5 pin, 5 Amps flush type white finish complete all as specified |
| 108 | S&F socket outlet 2 in 1, 3 pin, 5/15 A, flush type universal, 240 V white finish complete all as specified |
| 109 | S&F electronic socket size, rotary, 5 speed step type regulator, 120-230 V white finish complete all as specified |
| 110 | S&F ceiling rose, surface backlite, 65 x 20 mm three terminal all as specified ad directed. |
| 111 | S&F lamp holder insulated body with back plate suitable for angle / batten fitting all as specified ad directed. |
| 112 | S&F double door metallic sheet metal enclosure for DB when MCBs to be used SPN 8 ways, 240 V with 200Amps rated bus bar complete fixed properly in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires all as directed. |
| 113 | S&F in replacement testing and commissioning of MCB SP 240 volt 6 Amp to 32 amp 10 KA capacity having C-series connected with suitable lugs all as specified ad directed. |
| 114 | -do- but SPN 16-32 Amps -do- |
| 115 | M&L sub main wiring with two single core PVC-FRLS insulated unsheathed stranded copper conductor cable of size 4 sqmm drawn through and including heavygrade rigid PVC conduit 20mm or higher dia as required at site ,totally concealed in walls /floors/ceiling and surfaces on trusse by means of saddles & clips etc including all conduit accessoriesc /fiitting/junction box/inspection covers etc of heavy grade, ISI markedwith 4 Sqmm PVC-FRLS insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified. Note : (i) Two single core cable and one run of earth copper conductor and heavygrade rigid PVC conduit will be measured and paid as one unit length. |
| 116 | Material and labour for earthingcomplete with galvanised steel earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25metre deep below natural ground level) with top edge of the plate not less than 1.5metre below normal ground level, connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel connected to main switch board/ main DB’s/ earth test point with and including necessary excavation and earth work in any type of strata, PCC 1:3:6, type C1 in chamber wall with 50mm thick, RCC cover 1:2:4, type B0 duly reinforced with 6 mm diabar, @100mm both way with suitable lifting handle, charcoal dust and common salt mixed and packed in 150mm thick layer all around the earth plate, watering pipe of size 20mm dia medium grade, 0.63mm thick GI sheet funnel with wire mesh, GI protection pipe 15mm dia light grade up to 7.5m from electrode and engraving of earth marking on nearby structure/ building with cement motor 1:4 plate of size 200mm x 150mm x 15mm thick complete all as shown in electrical plate No. 5 of SSR Part-I complete all as specified and as directed. Note: - On testing if desired earth resistance is not obtained, the earthing will be redone at no extra cost. |
| 117 | M&L for cutting / boring of PCC/hard standing at a depth not more than 15 cm deep and 15 cm in breadth for passing earthing conductor and making good the disturbed surfaces with PCC (1:2:4) type B-0 or cement mortar (1:3) complete all as specified. |
| 118 | Supply and fixing of GI pipe light grade of size 15 mm bore for laying in trenches/floors or walls including allfittings for fixing complete as required and directed by Engineer-in-Charge. |
| 119 | M&L for earth continuity conductor or main earthing lead 4 mm dia GI or steel wire fixed to wall on batten or recessed or buried in ground or drawn in conduit/pipe all as required at site. |
| 120 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 121 | Material and labour for 20 W LED street/building light fitting energy saving and environmental friendly long life LEDlight made up of pressure versatiledie-cast aluminium housing with LED as lighting sourceof capacity 20 W LED 5700 K of make Havells /Crompton/Bajaj/Wipro complete all as specified and directed. |
| 122 | M&L for bracket made out of GI pipe 25mm dia medium grade, 0.6 mtr long bent to shape with MS flat iron clamps made out of 40mmX 6mm thick FI nuts, bolts complete all as directed by Engr-in-charge incl. taking down old unsv. |
| 123 | Material & labour for cutting chases,pinning in ,making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed conduit wiring ,etc and making good,cutting not exc 10cm girth ON BRICK WALLS all specified and directed. |
| 124 | Supply and Fixing exhaust fan, double ball bearing, ISI marked, metal body 300 mm sweep, single phase, 230 Volt AC, with louvers, including three core flexible cable of required length of size 23/0.0076 from ceiling rose/ connector to fan terminalincluding nut, bolt fixed on wall and all other accessories required at site and necessary cutting on wall and making good as per the requirement all as specified and directed. Make : Bajaj / Havells /Usha |
| 125 | Disconnecting and taking down ceiling fan of any sweep any make from any position at site, transporting to MES store Yardand rehanging/ re-fixing/ placing fan at same location at site includingproviding nuts, bolts, locking bolts, blade"s screws, split pin, rubber real, PVC connector, washers, of suitable size etc as required and re-painting one coat of supper enameled white paint with spray painting technique complete all as directed. |
| 126 | Supply and fix GI pipe of 15mm dia of medium grade for hanging of ceiling fans and make necessary fixing arrangement with ceilng fan and MS clamps and all as directed by Engr in Charge. |
| 127 | Supply and fix LED bulb of 13/15 watt of Havells Cat Part No LHLDDEHEML8R013 OR equivalent make in Bajaj/Crompton Greaves/Philips all as specified and as directed. |
| 128 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.equivalent make in Bajaj/Crompton Greaves/Philips all as specified and as directed. |
| 129 | S & Fcord flexible 23/0.0076 including dismantling old unserviceable one as directed by engr-in-charge.. |
| 130 | Ext Elect Supply Supply, lay, connect and testing of cable XLPE Insulated screened,PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 sqmm 2 core including taking down old unserviceable service wire/cable of any size all as specified and directed. |
| 131 | Excavation in trenches in soft/loose soil not exceeding 1.50 mtr wide and not exceeding 1.50 mtr in depth for laying of cables and gettingout complete all as specifiedand directed by Engineer-in-Charge. |
| 132 | Returing, filling in, including spreading, leveling watering and well ramming inlayers not exceeding 25 cms thick each layer compete all as specified and directed by Engineer-in-Charge. |
| 133 | Removal of surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point completeall as specified and directed by Engr-in-charge. |
| 134 | Supply and Laying DWC HDPE pipe of outer dia of 50mm and inner dia 40mm polyethylene (PE) with smooth internal and profiled external surface for non-pressure for underground cable including bends complete all as specified and directed.Make: “Rex Polyextrusion Ltd” or equivalent as approved by GE in writing. |
| 135 | Supply and fix DWC HDPE coupler of dia of 50mm complete all as specified and directed.Make: “Rex Polyextrusion Ltd” or equivalent as approved by GE in writing. |
| 136 | Supply and fixing galvanised pipe light grade of ISI marked 40 mm bore for passing of cable fixed to poles/walls/lay under floor complete with and including fittings as required compete all as specified and directed Engr-in-charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
