Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 01-09-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 08-09-2022 |
| 2 | 23-08-2022 | DATE POST | Date | 01-09-2022 |
| 3 | 23-08-2022 | BOQ REVISED 3 | BOQ | 01-09-2022 |
| 4 | 22-08-2022 | DATE CORRIGENDUM | Date | 29-08-2022 |
| 5 | 18-08-2022 | REVISED BOQ | BOQ | 27-08-2022 |
| 6 | 16-08-2022 | CHANGE IN DATES | Date | 27-08-2022 |
| 7 | 10-08-2022 | REVISED CRITICAL DATES | Date | 22-08-2022 |
| 8 | 02-08-2022 | Date Corrigendum | Date | 16-08-2022 |
| 9 | 29-07-2022 | Date corrigendum | Date | 09-08-2022 |
| 10 | 29-07-2022 | BOQ corrigendum | BOQ | 09-08-2022 |
| Sl. No. | Item Description |
| 1 | PART-I (B/R WORKS) Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 2 | Demolition of reinforced cement concrete of any description (reinforcement cut as required to facilitate demolition) complete all as specified and directed. |
| 3 | Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)complete all as specified and directed. |
| 4 | Demolition of Concrete in ground floors and pavingsexc 15 cm thickness (below or above ground level)complete all as specified and directed. |
| 5 | Taking down chowkhats or frames with shutters (without taking off shutters from the frame) n.exc 1.5 sqm each complete all as specified & directed. |
| 6 | Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but n exc 4 sqm each complete all as specified. |
| 7 | Dismantling of asbestos cement (corrugated or semi corrugated etc) as in roof covering complete all as specified and directed. |
| 8 | Dismantling boarding any description fixed in any position with nailscomplete all as specified and directed. |
| 9 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) orinsulation boards/slabs/blankets, any thickness, including cover filletscomplete all as specified and directed. |
| 10 | Dismantling of timber fillets rails, posts, rafters, purlins etc under 40 Sqcm in section, in any position in unframed workcomplete all as specified and directed. |
| 11 | Dismantling timber scantlings 40 sqcm and over in section, in any position, unframed work, etccomplete all as specified and directed. |
| 12 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified & directed |
| 13 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified & directed. |
| 14 | Demolition of reed, lathing, single or double, including battens and plaster or chicken wire lathing complete all as specified & directed |
| 15 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified & directed |
| 16 | Demolition of brick/stone masonry, built in cement mortar including all quoins, arches, pillars etc but exluding ashlars facings, dressed stone work and pre-cast concrete articles complete all as specified & directed. |
| 17 | Taking up or down 15mm boreGI steel tubing and connections, including cleaning for refixing or removal to storecomplete all as specified and directed. |
| 18 | Taking up or down 20mm boreGI steel tubing and connections, including cleaning for refixing or removal to storecomplete all as specified and directed. |
| 19 | Taking up or down 25mm boreGI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 20 | Site clearance asin soft/loose soil complete all as specified and directed. |
| 21 | Surface excavation n.exc (not exceeding) 30 cmdeep and averaging 15cm deep and getting outin soft/loose soil complete all as specified and directed. |
| 22 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits manholes, pier holes and getting out in soft/loose soil complete all as specified and directed. |
| 23 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out in soft / loose soil , returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed. |
| 24 | Returning filling in incl watering, ramming in layers n.exc. 25cm thick in soil complete all as specified and directed. |
| 25 | Removing excavated surplus soil to a distance n.exc. 50m and depositing where directed at level n.exc. 1.50m above the starting point complete all as specified and directed. |
| 26 | Spreading and levelling in layers n exc. 25 cm thick &well ramming including watering as required ( soil obtained from excavation shall be used for earth filling ) complete all as specified and directed. |
| 27 | M& L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including wateringcomplete all as specified and directed. |
| 28 | Material and labour for PCC 1:4:8 type D2 using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed. |
| 29 | Material and labour for PCC 1:3:6 type C2 using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed. |
| 30 | M&L for Reinforced cement concreteDesign mix (M-25) using 20 mm graded aggregate as in foundations, including rafts, footings,foundation beams, plinth beams, bases for columns, etc., basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 31 | M&L for Reinforced cement concreteDesign mix (M-25) using 20 mm graded aggregate as in columns,pillars, piers etc, complete all as specified and directed. |
| 32 | Material and labour for Formworkto sides of foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work vertical or to batterfor rough finished flat surface of concrete complete all as specified and directed. |
| 33 | Material and Labour for Formwork to sides of pillars, posts, struts, piers, columns and stanchionsfor rough finishedsurfaces of concrete complete all as specified and directed. |
| 34 | Material and labour for mild steel TMT bars 10mm dia and over cut to length bend to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or secruing with clips complete all as specified and directed. |
| 35 | All as per Item No 34but 6mm to 8mm dia. Complete all as specified & directed. |
| 36 | All as per Item No 34 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified & directed. |
| 37 | Material and labour brick work with sub class ‘B’ brick straight or curved on planexc 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 38 | All as per srl item No 37 above but except bricks complete all as specified and directed. |
| 39 | Material and labour for half brick work with sub class ‘B’ brick straight or curved on plan to anyradius built in cement mortar 1:4 complete all as specified and directed. |
| 40 | Material and labour for precast cement concrete1:2:4 type B1 using 20 mm graded crushed stone aggregates as in cover slab and set in cement morter 1:4 incl necessary formwork complete all as specified & directed |
| 41 | M&L for 75 mm thick PCC 1:3:6 type C2 (using 40 mm graded stone aggregates) as in subbase offloor complete all as specified & directed. |
| 42 | M&L for 100 mm thick PCC 1:3:6 type C2 (using 40 mm graded stone aggregates) as in floorfinished even & fair complete all as specified & directed. |
| 43 | M&L for 100 mm thick PCC 1:2:4 type B2 (using 40 mm graded stone aggregates) as in floorincl. Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified & directed. |
| 44 | M&L rendering 15 mm thick cement rendering in two layer each of 10+5 mm thick on fair faces of brick wall or concrete surfaces in CM 1:4 & water proofing compound mixed with second layer @ 3% finished even and fair complete all as specified & directed.Note -WPC shall be measured and paid separetly. |
| 45 | M&L rendering 15 mm thick cement rendering on fair faces of brick wall or concrete surfaces in CM 1:4 finished even and smooth without using extra cement, complete all as specified & directed. |
| 46 | Supply only WPC complete all as specified and directed. |
| 47 | Material and labour for plain cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate in surface channel/drain complete all as specified & directed. |
| 48 | Material and labour for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extracement, including forms, moulds, mi- tred/stopped ends etc complete all as specified & directed. |
| 49 | Add or deduct for each 25 mm girth or partthereof over or under 30cmcomplete all as specified & directed. |
| 50 | M&L for 75mm thickcement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection finished even and smooth without using extra cement laid inpanels and joints filled with bituminous mastic filling with 1 part of bitumen and 3 part of sand complete all as specified and directed. |
| 51 | S&F Rolled Mild Steel Fe 410 -W (Gde- E- 250) quality- A in Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittingsalso fastening and fixing complete all as specified and directed. |
| 52 | Supply and fixSteel work in tubular trussesincluding special shaped washer etc. complete using ERW or induction butt welded tubes using steelconforming to I. S.1161- 2014/ Is 4923-1997grade St.-210complete all as specified and directed. |
| 53 | Supply and fixRolled sections as in main andcross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plate using steel conforming to Fe-290 Gde E-165complete all as specified and directed. |
| 54 | S&F Mild steelscrew bolt11 to 15 mm dia (machine made) with hexagonal or square heads at one end and screwed at the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5 cm but not exc 10 cm long, complete all as specified and directed. |
| 55 | S&F plates (plain or chequered) Fe-290 (Gde E165) cut to required size, forming holes to receive holding down bolts and welded to tubular/square hollow section tubes at both ends complete all as specified and directed. |
| 56 | Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 57 | Supply and fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 58 | M & L for mild steel works as inbands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, clamps, holdfasts, wall ties, hooks for holding fans and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 59 | Material and labour for suspended false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system) of grid size 600mmx600mm with main runner 38 mm x 24 mm and wall angle 24mm x 24mm using 4mm thick high Pressure Non Asbestos Fiber Cement decorative designer Board (E-Board Classic) in a grid of GI system duly suspended with 4 mm bore GI bar hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures, air conditioning diffuser and ducts, sprinkler, smoke detectors etc. The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. The last hanger at the end of each main runner should not be interlocked between main runners @ 610mm c/c, as to form 600 mm x 600 mm gridcomplete all as specified and directed. |
| 60 | S&F Non Skid ceramic tiles colour7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over &including15 mm thick screed bed or bedding layers in cement mortar 1:6includingbrushing with neat cement slurry with 3 Kg of cement per sqm complete all as specified and directed. |
| 61 | All as per Srl item Noabove as in skirting over &including10 mm thick screed bed or bedding layers in cement mortar 1:4includingbrushing with neat cement slurry with 3 Kg of cement per sqm complete all as specified and directed. |
| 62 | S&F 20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window-cover &including15 mm thick screed bed or bedding layers in cement mortar 1:4 complete all as specified and directed. |
| 63 | M&L for coloured glazed ceramic tiles (450x300) 7mm thick on vertical surface such as skirting, dados, risers etc.set and jointed in neat cement slurry and pointed in coloured cementor pigment to match colour tiles over & incl 10 mm thick screed layer in CM 1:4complete all as specified and directed. |
| 64 | S&F Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match shade of the slab including rubbing and polishing over &including20 mm thick screed bed or bedding layers in cement mortar 1:3includingbrushing with neat cement slurry with 4 Kg of cement per sqm complete all as specified and directed. |
| 65 | M&LMachine cut kota stone slab20-25mm thick as in dado / skirting over cement screed base laid and jointed with grey cement slurry mixed with pigment to match shade of the slab including rubbing and polishingover &including10 mm thick screed bed or bedding layers in cement mortar 1:3includingbrushing with neat cement slurry with 4 Kg of cement per sqm complete all as specified and directed. |
| 66 | M&L 50 mm thick sand filling under floors or in foundation including watering levelling and consoliationas directed complete all as specified and directed. |
| 67 | M&Lmachine pressed precast concrete interlocking paver block coloured pre polished (rubber moulded) any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 grade with proper jointing, pointed with grey cement and pigment complete all as specified and directed. |
| 68 | M&L Plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in bed blocks, holdfast blocks, coping,lintels upto 1.5m clear span, cills, lin steps, kneelers, bed plates, apex stones kerbs benching , levelling course and similar work including necessary form work complete all as specified and directed. |
| 69 | M&L Plain cement concrete 1:3:6 type C-0 (using 12.5 mm graded stone aggregate) as in bed blocks, holdfast blocks, coping,lintels upto 1.5m clear span, cills, lin steps, kneelers, bed plates, apex stones kerbs benching , levelling course and similar work including necessary form work complete all as specified and directed. |
| 70 | Supply and fix Steel ventilator with top hung shutter including hinges, steel peg stay, lugs as in hold fast with locking arrangementscomplete all as specified and directed. |
| 71 | Supply and fix Pressed steel frames made of 1.25mm thick MS sheet of profile 125x60mm for doorframes with one or more rebates includinghinges (100/50mm stainless steel),lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and directed. |
| 72 | All as per item no.71 abovebut of size 105x60 mm, complete all as specified and directed. |
| 73 | Supply and fix 2nd class hard wood as in Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamferedput together with glue pinned at joints, supplied and fixedcomplete all as specified. |
| 74 | Supply and fix Framed work such as grills, gratings, etc. with ends of bars or forged into spikes, framed guard bars, barred iron doors; ladders; framed balusters, walk ways, railings, framework of water tanks and similar work con- forming to Fe 290 Gde E-165, complete all as specified and directed. |
| 75 | Supply and fix 35 mm thick 2nd class hard wood as inGlazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats supplied and fitted to chowkats complete all as specified. |
| 76 | Supply and fix 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sidesupplied and fitted to chowkats supplied and fitted to chowkats complete all as specified. |
| 77 | Supply and fix Steel windows with side hung shutters including box type hinges with steel handles, 2 Nos steel tower bolts 100mm long peg stay complete with glazing bars, dovetailed or welded, including locking arrangements complete all as specified. |
| 78 | All as per item no. 77 above but without glazing bars, complete all as specified and directed. |
| 79 | Supply and fix2nd call hard wood as in small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stopsand the like, including all necessary\" labours; articles n exc 200 cucm eachcomplete all as specified & directed. |
| 80 | Material and labour for second class hard wood, wrought, in scantling timberand fixed with nailscomplete all as specified and directed. |
| 81 | S & FSecondclass hardwood in scantling,clean sawn, timber framed and fixed in position, complete all as specified and directed. |
| 82 | Material and labour for second class hard wood plain fillets, square, rectangular or triangular in section, wrought secured with nails sectional area exc. 6 sqcm but not exceeding 13 sqcm complete all as specified and directed. |
| 83 | Material and labour for second class hard wood plain fillets, square, rectangular or triangular in section, wrought secured with nails sectional area exceeding 13 sqcm but not exceeding 25 sqcm complete all as specified and directed. |
| 84 | Supply and fix 100mm mild steel butt hinges medium weightcomplete all as specified and directed. |
| 85 | Supply and fix125 mm long aluminium handle cast type anodised complete all as specified & directed. |
| 86 | Supply and fix 200 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified & directed. |
| 87 | S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixedcomplete all as specified and directed. |
| 88 | Supply and fix Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4 mm , complete all as specified and directed. |
| 89 | Supply and fix Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4 mm and fixed in repairs, complete all as specified and directed. |
| 90 | Supply and fix for GI wire netting 0.70 mm dia and 12 mm mesh lathing to wood or metal studding joints etc in walls ceiling stanchion,beams etc included all laps cutting and wasts all as specified. |
| 91 | Supply and fix 3.00 mm thick sheet galss ordinary quality and glazing with oil putty in square not exc. 0.50 sqm in each pane, complete all as specified and directed. |
| 92 | Material and labour for second class hard wood 50 mm thick boarding wrought fixed with nails in any position (except skirting and flooring), complete all as specified and directed. |
| 93 | Supply and fix, white vitreous china wash basin counter top of size 560 mm x 441 mm oval shape ,including brackets ,cutting for and pinning in ends of bracketscomplete all as specified & directed.Make cat part No 10017 of Hindware or equivalent |
| 94 | Supply and fix,15 mm bore bib tap long body andfancy type, chromium plated,cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule fixed in repairs complete all as specified and directed. |
| 95 | Supply and fix 15 mm bore pillar tap fancy type, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without letter Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe fixed in repairs complete all as specified and directed. |
| 96 | Supply and fix,angle stop valve fancy type,cast copper alloy,chromium plated,screwed down high pressure, with crutch or butterfly handles for 15 mm bore pipe or for unions fixed in repairs complete all as specified and directed. |
| 97 | Supply and fix 32 mm dia Waste fittings, brass, chromium plated for glazedware sinks, basins, etc.with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixedcomplete all as specified and directed. |
| 98 | Supply & fixin repairsTubular towel rail, 20mmdia, D type, 60cm long between fl anges fixed with chromium plated brass screws and wooden/plastic cleat complete all as specified and directed. |
| 99 | Supply and fix 600mmx450mm looking mirror of selected quality glass mounted on 9mm thick commercial plywood and PVC mouldings frame fancy type complete all as specified and directed. |
| 100 | Supply and fix 75 mm bore PVC (SWR) Pipes single socketed, in any length with rubber ring joints,laid in trenches or floor complete all as specified and directed. |
| 101 | Supply and fix 40 mm bore PVC (SWR) Pipes single socketed, in any length with rubber ring joints,fixed to walls with suitable size of clamps , nuts bolts complete all as specified and directed. |
| 102 | Supply and fix 110 mm bore PVC (SWR) Pipes single socketed, in any length with rubber ring joints,laid in trenches or floor complete all as specified and directed. |
| 103 | Supply and fix 75 mm bore PVC (SWR) bendsof any radiuscomplete all as specified & directed. |
| 104 | Supply and fix 110 mm bore PVC (SWR) bendsof any radiuscomplete all as specified & directed. |
| 105 | Material and Labour for applying 1mm thick wall care putty on wallcomplete all as specified and directed. |
| 106 | M&L preparation of old painted steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 107 | M&L preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 108 | Material and labourfor preparation of new and previously un-treated wood and wood base surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed. |
| 109 | Material and labourfor preparation of old paintedwood and wood base surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint o complete all as specified and directed. |
| 110 | Material and labourfor preparation of new and previously un-treated wood and wood base surfaces of any description not exc.10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed. |
| 111 | Material and labourfor preparation of old paintedwood and wood base surfaces of any description not exc.10cm width or girth and applying two coats of synthetic enamel paintcomplete all as specified and directed. |
| 112 | Material and labour for preparation of plastered or un plastered surfaces of walls and applying two coats of oil bound distemper over one coat of primerocomplete all as specified and directed. |
| 113 | M&L forcomplete removal of existing treatment and applying two coat of oil bound distemper (white or tinted)over one coat of chalk whiting on wall overputty to make surface even and smooth, complete all as specified and directed. |
| 114 | M & L for preparation of newly plastered surfaces and applying three coats of white wash on walls complete all as specified and directed |
| 115 | M & L for preparation of old decorated plastered surfaces and applying two coats of white wash on ceiling incl brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss andefflorescent salts and trading oil and greasy spots complete all as specified and directed |
| 116 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including primingcoat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 117 | Material & Labour for complete removal of existingtreatment & applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including primingcoat of exterior primer applied @ 0.90 litre/ 10 sqm oversurfaces complete all as specified and directed. |
| 118 | PART-II (E/M WORKS)Taking down carefully copper/aluminum existing point wiring (light/fan/socket or power points) complete incl wooden battens/casing capping or conduit etc (without disturbing existing fittings point wiring etc) and all connected fittings such as switch, socket, ceiling rose, lamp holder, brackets ceiling fittings, bulk head fittings and fan regulator etc and making good to disturbed surfaces of wall floor etc complete all as specified and directed. |
| 119 | M&L for Point wiring using FRLSH PVC insulated unsheathed multi strand copper conductor cable 1100 volt garde1.5 sqmm including 1.5 Sqmm FRLSH PVC insulated unsheathed multi strand copper conductorearth wire drawn through and including PVC casing capping of suitable size with all fitting and fixture accessories on roof, wall, celling etcterminated in and incl concealed pressed steel sunken box readily available ( having wall thickness not less than 1.22 mm upto200 x 300 mm box size &having wall thickness not less than 1.63 mm beyond200 x 300 mm )duly covered with 3 mm thick bakelite sheet cover for fixing switches , sockets , fan regulators etc incl testing and making good to disturbed surface to match existing surface for one light/fan/bell point complete all as specified and directed. |
| 120 | All as per item No. 119 above but for one 3 pin socket outlet point, 5 Amps control by one switch on independent board complete all as specified. |
| 121 | All as per item No. 119 above above but for one 3 pin socket outlet point, 5 Amps control by one switch on same board with other switches complete all as specified and directed. |
| 122 | All as per item No. 119 above above but for one15 Amps socket point control by one switch on independent board with 2.5 Sqmm size PVC insulated unsheathed multi-stranded copper conductor cable with 2.5 sqmm PVC insulated unsheathed single core copper conductor earth wire complete all as specified and directed. |
| 123 | Supply and fixCeiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as specified & directed. |
| 124 | S&F switch piano flush type 5 Ampone way complete all as specified and directed. |
| 125 | Supply and fix socket outlet 3/5 pin 5 Amps flush typecomplete all as specified and directed. |
| 126 | Supply and fix socket outlet 3 pin 5 Amps and 5/6 pin 15 Amps flush typecomplete all as specified and directed. |
| 127 | S & F stepped type electronic fan regulator flush type 05 speed socket type complete all as specified and directed. |
| 128 | S & F Angular Lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings with 10 watt B22 CDL 3 star LED lamp complete all as specified and directed. |
| 129 | Supply and fix LED batten with built in driver made out of high quality aluminium extruded housing and aluminium heat shrink for mounting LEDs , mercury free and decorative end caps and maximum power consumption 9-10 watt with min system luminious efficiency lumen/watt > 100 , CT not less than 5700 K and CRI > 80 , operating voltage 140-270 volts AC , PF > 2.5 KV surge protection and current THD more than 15% complete all standard accessories as per manufacturer\"s instructions , internally prewired incl connecting up with twin core 0.75 sqmm copper conductor flexible wire complete all as specified and directed. |
| 130 | S&F LED linear light fittings 20 Watt basic all purpose surface and wall mounted and LED batten with polycarbonate housing and intrigated electronic driver and connecting with 3 core flexible copper cable PVC insulated of size 16/0.20 mm etc complete all as specified and directed. Make:- Crompton Greaves Cat No. CCS-100-20-65-HL2-DP-NWHor equivalent to Bajaj/Philips/Wipro/Syska LED/ M/SSurya Roshni Limited/M/S Jaquar & Company Pvt Ltd/ Havells |
| 131 | Supply and fix street /bldg security light LEDluminaire 20 watt IP 66 LED lamp, driver etc, including wall bracket 1.5 mtr long made out of 40 mm bore GI light grade pipe with suitable siz of clamps nuts bolts & all accessories & making connection with FRLSH PVC insulated unsheathed multi strand copper conductor cable 1100 volt gardecompleteall asspecifiedand directed. Make: Crompton Cat No. LTS-20-CDL-M or equivalent to Bajaj/Philips/Wipro/Syska LED/ M/S Surya Roshni Limited/M/S Jaquar & Company Pvt Ltd/Havells |
| 132 | Supply and fix plastic body exhaust fan, AC single phase, 240 V of size 250 mm sweep with louvers including necessary connection and replacement of flexible copper cable from ceiling rose and taking down of old unserviceable fan complete all as specified and as directed. Make :-CromptonCat Part NoBRISK AIR NEOor equivalent in Havells / Bajaj / Orient |
| 133 | Supply and fix BLDC 5 star rating ceiling fan, AC single phase, 240 V of size 1200 mm sweepincluding necessary connection and replacement of flexible copper cable from ceiling rose and taking down of old unserviceable fan complete all as specified and as directed. Make :-CromptonCat Part NoSUPER BRIZ DECO or equivalent in Havells / Bajaj / Orient |
| 134 | M & L for circuit /submain wiring along with earth wire 2 x 4 Sqmm PVCFRLSH insulated unsheathed cable multi-strand copper conductorincluding 1 x 4 Sqmm PVC insulated unsheathed multi strand copper conductor earth wire drawn through and including concealed PVC conduit of appropriate size not less than 20 mm dia and 1.8 mm thick including all fittings viz tees, bends, junctions box, connecting earth including cutting groove for concealed wiring, making good to disturbed surface of wall/floor with cement mortar and finishes to match existingincl taking down old unserviceable submain wiring complete all as specified and directed.Note: Two run of single core cable and one run of earth wire will be mearsured as one length |
| 135 | Supply and fix sheet metal enclosure powder coated single phase DB for fixing of MCBs, 8 ways double door with bus bar includinggrouting on the wall by means of screws and rawal plugs and making good disturbed surfaces including taking out of existing unserviceable DBcomplete all as specified and directed. |
| 136 | Supply and fix sheet metal enclosure powder coated single phase DB for fixing of MCBs, 4 ways double door with bus bar includinggrouting on the wall by means of screws and rawal plugs and making good disturbed surfaces including taking out of existing unserviceable DBcomplete all as specified and directed. |
| 137 | Supply and fix MCB SP 240 volts C-series , 50 Hz capacity 6-32 Amps complete all as specified & directed. |
| 138 | Supply and fix MCB SPN 240 volts C-series , 50 Hz of capacity 32 - 40 Amps complete all as specified & directed. |
| 139 | Supply and fix MCB TPN 240 volts C-series , 50 Hz of capacity 63 Amps complete all as specified & directed. |
| 140 | Material and labour for laying of bricks locally availablesub-class \"B\" brick (old size) for cable protection cover laid flat and dry in trenches over the cable perpendicular to the directon of cable complete all as specified and directed. |
| 141 | Supply and spread sand in trenches as sand cushioning to under ground cable for protection with fine river sand and provide reqdcover after punning down complete all as specified and directed.Note : Thickness of sand cushion after punning down will be measured and paid. |
| 142 | M&L for Boringhole under-neath road/hardstanding/pavement with trenchless technology using mechanical drilling/horizontal boring machine for crossing of cable without cutting the surface and providing 80mm bore HDPE pipe suitable for 0.4mpa working pressure and making good the disturbed area etc complete all as specified and directed.Note : 80mm bore HDPE pipe is deemed included in unit rate quoted by the contactor. |
| 143 | Material & labour GI tube light grade 40 mm for protection ofUG cable including dismantling of old unsv pipe complete all as specified and directed. |
| 144 | Supply, fixing, commioning & testing of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, Electric power cable (heavy duty) with aluminium conductors, 1100 volts, grade cross sectional area 35 Sqmm 3.5 core laid in trenches/fixed to wall/under road/pipe etc with and including copper cable glands & copper thimblescomplete all as specified and directed. |
| 145 | Material and labour for earthing with galvanised steel earth plate electrode60cmX60cmX 6mm thick burried directly in ground (earth pit not less than 2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below ground level connected toearth wire 4 mm dia GI wirewith mild steel nuts bolts checknuts & washers and connected to equipment as directed incl funnel with Gi medium grade watering pipe 20 mm bore , wire mesh , charcoal or coke and commn salt in alternate layers of 15 cm compacted thickness all around the earth electrode with concrete pit in PCC 1:3:6 type C-1 with 50 mm thick precast RCC cover in PCC 1:2:4 type B-1 cover slab reinforced with 8 mm dia deformed bars @ 15 cm c/c with suitable handle of 10mm dia round bar , 15 mm bore medium grade pipe for earth lead protection inclnecessary excavation and earth wok in soft / loosesoil and disposal of spoil to a distance n exc 50 m and necessary testing complete all as shown in electrical plate No 3 of MES SSR Part-I complete all as specified and directed. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
