Military Engineer Services-MES has published Provision Of 10 Kva Dg Set, Solar Street Light, Security Light, Lighting Conductor And Geyser Etc At Certain Location At Umroi Mil Stn Under Ge Umroi. Submission Date for this Tender is 03-08-2022. Conductor Tenders in umroi Meghalaya. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 27-Jul-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 03-08-2022 |
| Sl. No. | Item Description |
| 1 | Material and labour for point wiring for One light/fan point controlled by one,one way switch with 1.5 Sqmm single core, PVC FRLSH insulated unsheathed, multistranded copper conductor drawn through and includingPVC casing and caping including necessary accessories like bends, tees, PVC square and elbow etc fixed on wall/ceiling with 1.5 Sqmm PVC FRLSH insulated unsheathed multi stranded copper conductor cable as earth conitinuity (green in colour) connected to common earth dolly including sunken type pressed steel terminal boxes of suitable sizes with plastic laminated white/coloured top bakelite sheet cover 3 mm thick, complete all as specified |
| 2 | Material & labour for Sub main wiring with two runs of single core, FRLSH 2.5 Sqmm (Nominal Area) FRLSH PVC insulated and unsheathed multi standed copper conductor cable LT 1100 volts grade drawn thorugh PVC Casing capping medium grade and including joint, exterior, tee, elbow, connector and other accessoriesof adequate size fixed on the surfafce of wall/ceiling with all necessary fittings and accessaries and 1 run of FRLSH PVC insulated and unsheathed insulated single core cable with multi standered copper conductor of size 2.5 Sqmm as earth wire (green in colour) run through PVC Casing capping and connected common earth dolly including taking out the old sub main wiring two run of 2.5 Sqmm cable one run of PVC Casing capping and one run of 2.5 Sqmm earth continuity wire for connection to DBs/dolly shall be deemed to be included in this item and shall be measured as one run complete all as specified and directed |
| 3 | Supply and fixing of switch piano flush type 240 Volts 5 Amps, SP, one way complete all as specifed/directed. |
| 4 | Supply and fixing switch socket out let combination multipurpose 3 pin, 5/16 Amps and (with 3 pin 5 Amps outlet also) flush type (non shuttered) in independent board complete all as specified/directed. |
| 5 | Supply and fixing Bulb angular/batten holderPVC/Polycarbonate suitable for batten fittings including one No LED Lamp of 9W of Havells/Philips/Cromton Make, complete all as specified/directed. |
| 6 | Supply and fixing ofceiling rose surface PVC/Polycarbonate, 65x50 mm two to three terminals complete all as specified/directed. |
| 7 | Supply and fixing LED fitting 1x18watts including Tube rod, 230 Volts, bipin holders connector block etc.complete with all accessories internally pre-wired and includingprovision of PVC round block 7.5cm dia and 2 cm in depth (2 Nos) for mounting the fittings and electrically connecting with three single core 23x0.0076 PVC insulated multistranded copper conductor flexible cable from ceiling rose to light fitting, complete all as specified and directed.Make: BAJAJ Cat Part No: BLRB- DB 118 for batten and BLRB-18 Watt CWc for tube light or its equivalent in Surya Roshni Ltd/CG/Havells |
| 8 | Supply and fixing of MCB Distribution board TPN 4 Way for mountingTPN/SPN/ SP MCBs as Incoming / outgoing, factory made, confirming to IS, fabricated out of CRCA sheet , fitted with DIN channel, neutral link and suitable rated bus bar, DBs shall be semi glossyfinished with epoxy polyester based powder paint sprayed and backed at high temperature, between powder paint process the sheet steel having to go through the anti rust conditioning in not less than seven tank process to ensure smoothfinish and protection against corrosion atmosphere. The DBs shall be double door type with hinged door with locking arrangement. The DBs shall be of IP 43 - IK 09 with metal door complete all as specified and directed by Engr-in-charge. |
| 9 | Supply and fixing of MCB Distribution board SPN 4 Way for mountingSPN/ SP MCBs as Incoming / outgoing, factory made, confirming to IS, fabricated out of CRCA sheet , fitted with DIN channel, neutral link and suitable rated bus bar, DBs shall be semi glossyfinished with epoxy polyester based powder paint sprayed and backed at high temperature, between powder paint process the sheet steel having to go through the anti rust conditioning in not less than seven tank process to ensure smoothfinish and protection against corrosion atmosphere. The DBs shall be double door type with hinged door with locking arrangement. The DBs shall be of IP 43 - IK 09 with metal door complete all as specified and directed by Engr-in-charge. |
| 10 | Supply & fixing of MCB TPN 32 Amps"B" Series 10 KA 240 volts complete all as specified/directed. |
| 11 | Supply & fixing of MCB SP 6-32 Amps"B" Series 10 KA, 240 volts complete all as specified/directed. |
| 12 | M&L Earthing complete with Galvanised steel earth plate 60cmx60cmx6mm thick electrode, buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 m below ground level , connected to GI earth strip 25 X 4mm up to test point by means of bolts ,nuts , check nuts and washers of GI including excavation and earth work, PCC 1:3:6 type C-1 pit, 20mm dia GI pipe medium grade, watering pipe and 20 mm bore GI pipe, light grade for protection of earth strip, MS angle iron frame 40x40x3mm, 10mm thick RCC 1:2:4 type B-1 cover reinforced with 6mm dia MS bars @ 75mm C/C both ways and with MS handle made out of 12mm dia bars, PGI Funnel, wire mesh etc complete all as shown in electrical Plate No 03 of SSR Part-I and connected to earthing test point all as specified or indicated including testing on completion complete |
| 13 | Supplying, installation , testing and commissioning complete of Silent Diesel engine driven generating set 415 Volts 3 phase 4 wire engine as per BS 5514/ IS;10001and alternator as per IS;13364 complete with standard control panel having meters, sound proof canopyetc complete capacity 10 KVA , at power factor 0.8 minimum as perISO -8528 conforming. The DG set shall consists of diesel engine coupled to a matching alternator, through closed coupling and mounted on common base frame mounted on PCC/RCC platform of suitable size as per manufacturer recommendation and complete with control panel standardized by manufacturer, fuel tank with mounting arrangements and inlet, outlet return inlet oil arrangement, exhaust pipe complete including PCC foundation as per manufactuers instructions(of suitable size leaving at least 0.50m all around for ease of movement and 0.50m height), antivibration pads including all features to comply with latest CPCB II guidelines and comprising of following :- (a) Diesel Engine:- The engine shall be multicylinder four stroke, 1500 RPM, Air cooled, turbo charged complete with instrument panel electronic governor, starting battery of capacity 75AH to 80 AH with lead, exhaust pipe and silencer pipe with suitable insulation by glass wool and aluminium cladding , safety devices and other standard fitting etc complete as per BS 5514/ IS;10001 and BHP suitable to the generator. The engine and alternator shall be mounted on a common base frame with AVM pads all as per manufacturer KIRLOSKAR/ MAHINDRA POWEROL/ Jackson Power /ASHOK LAYLAND/ RUSTON |
| 14 | Continiued from item no.13 here-in-above (b) ALTERNATOR - Rating- 7.5 KW/10 KVA at 1500 RPM 415 Volts phase to phase and 240 Volt phase to Neutral, 50 Hz 3 phase 4 wire system alternator screen protected/drip proof, self ventilating, self excited self regulated, brushless, vontineous duty protection IP 21 as per IS 13364 devoloping 10 KVA at 0.8 PF. it shall have provision for 10 % overload for one hour omn every 12 hours, The alternator shall confor to Is; 13364.BS5000. Make:-KIRLOSKAR/ MAHINDRA POWEROL/ CUMMINS/ ASHOK LAYLAND/ RUSTON/ GREAVES Cotton. (c)Standard CONTROL PANEL (IN BUILT CONTROL PANEL) :- Control panel shall consist with followings :- (i) MCB of suitable rated capacity. (ii) Microprocessor based Gen set controller having thefollowing monitoring features anddiagnostic features :- (aa) Monitoring features :- Phase Voltage, phase current, KVA, KW, KVAr, KWH, Power factor, Lube oil pressure engine temperature, RPM,Runhour, No of start, Fuel level auto,manual stop. (ab)Diagnostic fealtures:- Battery charging failure, over/ under speed, over current, over/ under voltage, over KW, Phase sequencing,Phase missing, Low lube oil pressure, high engine temperature, low/ high battery voltage, low fuel level, over crank protection. |
| 15 | Continiued from item no.13 here-in-above (d) ACCOUSTICENCLOSURE :-Sheet metal fabricated designed weather proof, sound proof acoustic enclosure meeting stringent and lates MOEF/ CPCB II noise pollution norms. (e) Fuel Tank:- The fuel tank shall be mild steel suitable to hold fuel for not less than12 hours runnning capacity and shall be including fuel level indicator , fuel line from tank to the engine etc complete all as specified. (f) MISC : Tool kit, Operation & Maintenance catalogue, spare part list, overhauling mauals, guarantee card, etc shall be supplied/provided as per manufacturer standard practices. Note : Cost of foundation to be included in the quoted rates. |
| 16 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of sizes 25 Sqmm 4 core, complete all as specified and directed. |
| 17 | Supply, laying and testing cable XLPE Insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of sizes 16 Sqmm 2 core, complete all as specified and directed. |
| 18 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of sizes 10 Sqmm 2 core, complete all as specified and directed. |
| 19 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of sizes 6 Sqmm 2 core, complete all as specified and directed. |
| 20 | Excavation in trenches not Exe. 1.5 m wide and not Exe. 1.5m in depth for foundation, etc, or for shaft, wells, cesspits, manholes, pier holes, etc. not exc. 10 sqm on plan and getting out in soft/loose soilcomplete all as specified. |
| 21 | Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil all as specified and directed. |
| 22 | Supply and spread sand in trenches as sand cushioning to underground cable for protection with fine river sand and provide required cover after punning down complete all as specified and directed. (Note: Thickness of sand cushion after punning down will be measured and paid.) |
| 23 | Supplying and laying un-reinforced precast concrete cable cover, class HVP, Type 3, flat, size 450mm x 180mm x 40mm ISI marked, complete all as directed. |
| 24 | Removing surplus excavated materials (soil) upto a distance not exe 50 m and depositing where directed at a level n exe 1.5 m above the starting point complete all as specified and directed. |
| 25 | Supply and fixing of LED street light fittings in aluminium PDC housing, toughened glass cover,individual LEDs with secondary optics,covered with IP66 protection with inbuilt surge protection of minimum 10 kV and repair/replacement warranty of minimum 3 years of capacity 45W, complete all as specified and directed by Engr in charge. Make:- Crompton Cat part No TRP-409-45-57-NS-GL-NSG, Havells Cat part No. ENDURASUNDOWN SL45WLED 765PASYBOPC, HPL Product code HPLLEDSL4560E or equivalent make mentioned in PS. |
| 26 | Supply and fixing of LED street light fittings in aluminium PDC housing, toughened glass cover,individual LEDs with secondary optics,covered with IP66 protection and repair/replacement warranty of minimum 3 years of capacity 20W/25W including taking down carefully defective street light 20/25 Watt and any wattage from the LT poles by disconnecting electric supply and removing from site complete all as specified and directed by Engr in charge. Make:- Crompton Cat part No TRP-400-25-57-SL-LM-NSR, Havells Cat part No. ENDURASUNDOWNSL25WLED765PASYBOPCIHD & Bajaj, Model: BCLST 2OW LED I V2 or equivalent make mentioned in PS. |
| 27 | S&F for 32 mm dia GI tubing light grade bracket over all 1.2 mtr length with cutting as required and bend to shape with flat iron clamp of size 32 mm 2 Nos, suitable size of nut bolts and washers completefor fixing street light fittings on electric poles including taking down old unsv / fully rusted existing unsv one complete all as specified and directed.Make:Nezone/Surya/Jindal poles |
| 28 | Supply and fix onload Change over switch 63A complete all as specified and directed. |
| 29 | M&L Steel Tubular swaged pole complete with cast iron base plate, final taper, bolts, nuts and screws etc as specified for type 410-SP-31 (9.00 mtr long) including painting withtwo coats of aluminium paint over one coat of red oxide primer, duly drilled hole 6nos at top portion of pole for fixing D clamp insulators complete all as specified. |
| 30 | S&F CPVC pipe SDR 11 `Class 1", 15 mm internal bore min. dia including all fitting; laid in trenches or fixed on wall or conclealed to wall and making good disturbed surface by using white cement/white putty and plaster finishing after fitting of CPVCcomplete all as specified and directed. |
| 31 | Supply, installation, testing & commissioning of heater water storage type electric geyser (vertical cylindrical type) 25 litre capacity with BEE 5 star rating (minimum) and ABS body, porcelain enamel glass lined inner tank including fixing arrangement with providing including suitable capacity flexible cable 3 core with 3-pin plug of 16 amp capacity maximum 2 mtr length, PVC connection pipe of size 15 mm dia and 450mm length for Hot Cold water, including chromium plated brass nuts and fixing on walls with and including all necessary fitting material i.e. Mild steel Bolts (Bolts to be grouted), CP brass nuts, Washers, etc complete all as specified and as directed. Make:Havells, Model:- Bianca, Product code GHWCBNTIV025 or equivalent to CROMPTON |
| 32 | S&F stop Valve of 15 mm fancy type, chromium plated with long shank and cup (concealed type), complete all as specified and direced. |
| 33 | S&F Bib taps 15 mm, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and direced. |
| 34 | Supply and fix CPVC ball valves 15mm, Plastic, screwed down, high pressure, withcrutchor butterfly handle, screwed both ends for CPVC pipe orfor unions and fixed. |
| 35 | Supply and fix CPVC Tank connector 15mm, Plastic , screwed down, high pressure, screwed both ends, one side for CPVC pipe and other side for connection of existing Tank. |
| 36 | M&L for plain cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregate in foundation of pole / strut etc including necessary form work all as specified and directed by Engineer-in-Charge. |
| 37 | M&L for plain cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate in foundation of pole / strut etc including necessary form work all as specified and directed by Engineer-in-Charge. |
| 38 | S&F of galvanised iron steel tubing, 40mm bore, light grade with all fittings fixed complete to walls and ceiling or laid under floors, complete all as specified and as directed. |
| 39 | M&L for earthing complete with galvanized steel earth plate electrode of 60 cm x 60 cm x 6.00 mm thick buried directly in ground [earth pit not less than 2.25 metre deep below normal ground level] with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized iron strip of size 32x6mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of MES SSR Part I connected to earth test point all as specified and testing on completion includingprovisionof earth lead protected by 40 mm bore light grade GI pipe & watering pipe shall be 20 mm bore medium grade GI pipe including all excavation and earh work in any type of soil, PCC pit with RCC cover, char coal, salt, funnel etc complete. |
| 40 | S&F 3-layer PP-R Polypropylene random copolymer)of size 32mm concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and as directed. |
| 41 | M&L Drilling and tapping DI/cast iron water mains (in position) for branch connections of the internal dia 15/20mm bore complete all as directed. |
| 42 | Supply and fix PP-R Gate valve of size 32mm (brass insert) as per requirement of the site complete all as specified and direceted. |
| 43 | Supply & fix single pointed air termination Copper rod 12mm dia, 300 mm long on Gi pipe 50mm with 20x3mm MS clamps, nut bolt bracing etc. required at site all as specified and as directed.(Cross arms will be measured and paid seperately. |
| 44 | S&F test point terminal block made of gun metal or phosphhorus bronzesize 75x75x25mm, drilled and screwed including 3 Nos, 8mm dia 25mm long hexagonal head brass screws including suitable sheet metal powder coated enclosure complete all as specified and as directed. |
| 45 | Supply & fix aluminium strip 25mm x 3.15mm complete with epoxy insulators at every one mtr distance at normal run and 60cm at every corner and edges of bld tarrace and fixing screws for fitting the strip complete all as specified and as directed. |
| 46 | M&L for plain cement concrete1:2:4, type B1, (using 20mm graded stone aggregate) as in coping including necessary use & waste of form work complete all as specified and directed. |
| 47 | Supply & fix Galvanised iron strip 32 x 6mm complete with saddles and fixing screws for fitting the strip complete all as specified and as directed. |
| 48 | Supply and fix PVC street light boxof size 155*210*92 mm having IP66 " water proof" consisting of 01 No MCB 10 Amps, 10 KA capacity (3 phase and neutral) including aluminium strip bus bar for incoming and outgoing cable with necessary connection duly fixed on the pole with suitable size of MS clamp as approved and directed. |
| 49 | Material & labour for Sub main wiring with two runs of single core 2.5 Sqmm (Nominal Area) in aluminium/steel conduit insulated and unsheathed multi standed copper conductor cable LT 1100 volts grade drawn thorugh into metallic rigid conduit including PVC insulatedstranded copper conductor nominal cross section area as under as contineous earth continuity wirecomplete all as specified.Two run of 2.5 Sqmm cable one run of 2.5 Sqmm earth continuity wire for connection to DBs/dolly shall be deemed to be included in this item and shall be measured as one run complete all as specified and directed. |
| 50 | S&F for Lithium based Energy Efficient Integrated Solar Street light 30 watt including 6 mtr long octagonal pole duly painted with two coat of synthetic enemal paint over a coat a primer, (typeCPT-4030) top dia 70 mm bottom dia 130 mm sheet thickness 3 mm including base plate of size (L x B x T) 200 x 200 x 12 mm, bolt size 4 x 16 mm dia and bolt length 450 mm with Solar PV Panel 64/66Wp Monocrystalline, Lithium Battery 11.1/12.8V, 33.0AH with inbuilt BMS, High brightness W-LED(160-180 lm/watt) lamp with reflector, CRI >70, Color Temperature 6500K, Microcontroller based charge controller cum driver, automatic dimming function with PIR Motion Sensor, Dusk to Dawn Operation, Working temperature: (-) 10C to (+)55C, Weight: 18–20 kg, with adjustable MS clamp suitable for pole/wall mounting. Protections: Short Circuit, overload, Reverse polarity and battery protections. (Civil work is included in the quoted rate) Make: Crompton / Havells / Philips / Bajaj or its equivelant in specified in CA |
| 51 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and rammingearth or broken rubble mixed with earth around, in layers not exceeding 25 cm, getting out in soft/loose soil complete all as specified and directed. |
| 52 | S&F for MS work tubular pipes as in vertical/horizontak members incl special shaped wshers etc using EWR on induction butt welded tubes confirming to IS 1161-1979 grade sit 240, complete all as specified and directed. |
| 53 | S&F for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running railsand guides for sliding doors; fixed with angle cleats or other connecting plates, conforming Fe 410-W (Gde- E- 250) quality- A, complete all as specified and directed. |
| 54 | S&F MS screw botls (machine made) with hexagonal or square heads at one end and screwed the otheror screwed both ends wasch screwed end to be fitted woth washers and one hexagonal or square not n exc 5 cm long dia of neck 10 mm including wo washer , complete all as specified and directed. |
| 55 | S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 56 | M&L Two coats of synthetic enamel paint over a coat of red oxide, zinc chromate on steel surface including preparation of new or previously untreared surface. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
