Military Engineer Services-MES has published Certain Repair Of Roof, Ac Sheet, False Ceiling, Joinery, Tiling, Flooring And Repair/Cleaning Of Sewage System In Md/Otm Accn In City Area Under Age B/R-I At Alwar . Submission Date for this Tender is 11-08-2022. Shed Construction Tenders in alwar Rajasthan. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 04-Aug-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 11-08-2022 |
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (un-reinforced) in ground floor and paving exc 15 cm thickness (below or above ground level) & removal of rubbish material complete all as specified& directed by Engr-in-Charge. |
| 2 | M&L for PCC (1:2:4) type B-1 (using20mm graded stone aggregate), 25mm thick, as in sub base complete all as specified& directed by Engr-in-Charge. |
| 3 | M&L vitrified ceramic tiles 8 to 9 mm thick in light shade (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm thick cement screed in cm 1:6complete all as specified and directed.Make : Kajaria/ Somany/ Johnson. |
| 4 | M&L non skid ceramic tiles colored 300mm x 300mm x 7mm thick in floor set and jointed in neat cement slurry and pointed in white or coloure cement and over 15mm thick screed bed in CM 1:6 complete all as specified& directed by Engr-in-Charge. Make : Kajaria/ Somany/ Johnson. |
| 5 | M&L non skid Coloured ceramic tiles7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bedin cm 1:4complete all as specified. Make : Kajaria/ Somany/ Johnson. |
| 6 | Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to stores and rubbish off premises all as specified. |
| 7 | M&L glazed ceramic coloured tiles in vertical surface450mm x 300mm x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles and over 10 mm thick rendring in cm 1:4 complete all as specified & directed by Engr-in-Charge. Make : Kajaria/ Somany/ Johnson. |
| 8 | M&L glazed ceramic tiles in vertical surfaces300mm x 200mm x 7mm thickset and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in CM 1:4 complete all as specified and directed. |
| 9 | M&L for vitrified ceramic tiles 10mm thick (square/ rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, in wall, dado, skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over 10 mm thick rendring in cm 1:4 complete all as specified & directed by Engr-in-Charge. Make : Kajaria/ Somany/ Johnson.. |
| 10 | M/L 75mm thick cement concrete 1:4:8 type D-2 using (40 mm graded stone agg) as in sub base complete all as specified and directed by Engr-in-Charge. |
| 11 | M&L coloured chequered cement concrete tiles 30cm x 30cm x 18/19mm thick, set,jointed and pointed in neat cement slurry in floorsover and incl15mm thick cement screeding in CM 1:6. Complete all as specified and directed by Engr-in-Charge. |
| 12 | M&L 60mm thick machine pressed precast conctete interlocking paver block with grey cement andpigment any shape and size confirming to IS 15658-2006 , M-35 Grade and over 25mm thick sandcomplete all as specified and as directedby Engr-in-Charge. |
| 13 | M&Lfor 40mm thick PCC 1:2:4 type B -1 using 20 mm graded aggregate as in flooringcomplete all as specified & directed by Engr-in-Charge. |
| 14 | S&F glass dividing strips, 3 mm thick and 28mm width complete all as specified |
| 15 | Dismanltingof kerb stoneincluding cement bedding & removed off rubble. |
| 16 | M&L for PCC Type D2 1:4:8 (40mm graded stone aggregate) cement concrete in foundations, filling and mass concrete complete all as specified & directed by Engr-in-Charge. |
| 17 | M&L precast cement concrete solid blockfactory made as in Kerb stone in PCC 1:2:4 type B-1 using (20 mm graded stone aggregates) set in CM 1:6 sizeof precast concrete block complete all as specified & directed by Engr-in-Charge. |
| 18 | M&L 50mm thick PCC(1:3:6) type C1 (using 20mm graded stone aggregate ) as in plinth protection finished fair and even complete all as specified & directed by Engr-in-Charge. |
| 19 | Taking down cement plaster any description on brick or stone walls etc. |
| 20 | M&L for rendering 15mm thick in CM 1:4 on stone wall surfaces or other than fair faces of brick work & surfaces finished even and smooth without using extra cement with water proof compound all as specified. |
| 21 | M&L rendering 10mm thick in cement mortar 1:6 on fair faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified. |
| 22 | M&L rendering 5mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specified. |
| 23 | M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paintof approved shade/tint complete all as specified& directed by Engr-in-Charge. |
| 24 | M&L for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified. |
| 25 | M&L for preparation of new plastered surfaces of walls and applying two coats of Oil bounddistemper overa coat primer of approved tint complete all as specified & directed by Engr-in-Charge. Make : Berger/Asian Paints / Nerolac |
| 26 | M&L preparation of new plastered/unplastered surfaces of ceilings & applying three coats of white wash complete all as specified. |
| 27 | Demolition of brick/stone masonry built in cement/lime mortar of any mix including all quoins pillar ashlars masonryand removal complete all as specified& directed by Engr-in-Charge. |
| 28 | M&L brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 29 | M&L brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4 complete all as specified and directed. |
| 30 | M&L for walling of random rubble,bedded and solidely hearted Uncoursedbuilt in CM (1:6) complete all as specified and directed. |
| 31 | All as per item No 30.00 above but except stone complete all as specified and directed. Note:- Old serviceable stone obtain from Srl item No. 15 shall be used. |
| 32 | Extra over stone walling for hammer dressed to face stores and dressing of face beds and joints as specified of random rubble walling uncoursed or brought upto course with maximum deprssion on face from straight adge held against the depressed surface on lime or sand stone not exc 20mm for rock faced complete all as specified |
| 33 | M&L Plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) set in cement mortar 1:6 as in coping of brick masonry wall kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin) corbels, brackets, etc. including weathering slightly rounded or chamfered angles and throating as directed including necessary formwork complete all as specified& directed by Engr-in-Charge. |
| 34 | M&L for providing precast cement concrete louvres and jallies, 25mm thick (measured solid), including all mould- ings but excluding frame set in cement mortar Set in cement mortar 1:4 (type B-0 1:2:4) 12.5mm agregate complete all as specified & directed by Engr-in-Charge. |
| 35 | Taking up or down 15mm steel tubing and connections, including cleaning for re-fixing or removal to store. |
| 36 | Taking up or down 20mm steel tubing and connections, including cleaning for re-fixing or removal to store |
| 37 | S&F steel tubing medium grade 15mm bore with all fittings fixed complete to wall and or laid in floor all as specified. |
| 38 | S&F steel tubing medium grade 20mm bore with all fittings fixed complete to wall and or laid in floor all as specified. |
| 39 | S&F Rotational moulded polyethylene water storage tanks( white colour) (cylindrical vertical with closed top) of capacity 500 Ltrs hoisted and fixed in position all as specified in SSR Part I including dismantaling existing water tanks and removing to store, complete all as specified and directed. |
| 40 | S&F Rotational moulded polyethylene water storage tanks( white colour) (cylindrical vertical with closed top) of capacity 1000 Ltrs hoisted and fixed in position all as specified in SSR Part I including dismantaling existing water tanks and removing to store, complete all as specified and directed. |
| 41 | S&F in repairs ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed of 20mm dia, minimum weight - 210 gms of including taking down existing ball valves any typeall as directed by Engr-in-Charge.Make : Prayag or equivalent as approved by GE. |
| 42 | S&F fixed in repair vitreous china wash down water closet pan (Pedestal pattern), white including connection to drain (or outgoing pipe) and to flushing pipe, anti-sypohonage pipe etc. & with plastic WC seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified & as directed. |
| 43 | S&F white vitreous china wash hand basin "Flat back" of size 550mm x 400mm fixed on and including new brackets CPwaste coupling and PVC Waste pipe complete all as directed by the Engr-in-charge. Make :Cera/Hindware/Johson or equivalent. |
| 44 | S&F in repair Vitreous China Squatting pan, Orissa pattern, size 580 x 440mm white with integral foot rests connection to trap and to flushing pipe,etc.complete including making food to floor complete all as specified & directed by Engr-in-Charge. Make : Parry ware/ Hindware/Cera or equivalent. |
| 45 | S&F in repairs PVC low level flushing cistern 10 litrs capacity (white ISI marked) with inlet ball valve,float and handle, syphonic action type including brackets and flush pipe of polythelene of low or high density of PVC 32mm dia for LLFC complete all as specified. Make Dolfine, Commander Champion or equivalent. |
| 46 | S&F in repairs Jet spray chromium plated brass for EWC with & including PVC connection 600 mm long suitable for 15 mm bore GI pipe with PTMT nut & nipple complete. |
| 47 | S&F in repairs PVC connection of 15mm bore with2 Nos. PTMT nuts, 45cm long fixed with one end to pillar tap & the other end to stop cock or iron pipe all as directed by Engineer-in-charge. |
| 48 | S&F in repairs MS grating CP 100mm dia, with hole for waste pipe of approved make including fixing with CM to floor/nahani traps etc complete all as directed. |
| 49 | S&F in repairs pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or withoutlettered "Hot" or "Cold" with long screwed shanks & fly nuts, screwed for iron pipes of 15mm bore all as specified includingtaking down existing pillar tap and removing the same to store. Make : Cera/ Plumber /Jaguar or equivalent. |
| 50 | S&F in repairs fancy type 3-Hole Basin Mixer without popup waste system but including plain waste 32mm size with aerator complete cast copper alloy, chromium plated, screwed down high pressure, with long screwed shanks & fly nuts, screwed for iron pipes of 15mm bore. Make: Prayag / Jaguar / Cera or equivalent. |
| 51 | S&F in repairs brass chromium plated wall mixer for mixing hot & cold water screwed down for iron pipe of 15mm bore all as specified and as directed. |
| 52 | S&F in repairs brass chromium plated shower rose 65mm size with swivel joint type including fixing to steel pipe of 15mm bore or union complete all as specified. |
| 53 | S&F in repairs sink with drainage board made out of stainless steel 1mm thick sheet for kitchen with plug, washers, waste pipe, cast iron centilever bracket, connecting union over all minimum size 915mm x 460mm with bowl size410mm x 330mm x 160mm complete all as specified. |
| 54 | S&F in repairs looking mirror 600mm x 450mm bevelled edge 5.5mm thick selected quality glass, mounted on 6mm thick commercial ply, aluminium frame around and fixed to wooden plug with CP brass screws and cup washeres and as directed. |
| 55 | S&F in repairs bib tap cast copper alloy with crutch or butter fly handle 15mm bore fancy type chromium plated complete all as specified. |
| 56 | S&F in repairs bib tap cast copper alloy with crutch or butter fly handle 15mm bore chromium plated complete all as specified. |
| 57 | S&F in repairs 15mm bore Stop valve, fancy type with long shank and cup (concealed type) of cast copper alloy chromium plated, screwed down, high pressure with capstan heads, screwed both ends for iron pipe or for union. |
| 58 | S&F in repair 15mm bore Stop/angle valves, fancy type chromium plated cast copper alloy screwed down high presure, screwed both ends for iron pipe or for unionscomplete all as specified. |
| 59 | S&F in repair chromium plated health faucet for EWC with including PVC Connection 1m long suitable for 15mm borewith all connected fittings.as approved by the GE. |
| 60 | S&F in repair PVC (SWR) pipes 110 mm bore single socketed, in any length with rubber ring joints laid in trenches or in floorscomplete all as specified & directed by Engr-in-Charge. |
| 61 | S&F in repair PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed by Engr-in-Charge. |
| 62 | S&F in repair PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed by Engr-in-Charge. |
| 63 | S&F in repair PVC (SWR) bends any radius 110 mm borecomplete all as specified & directed by Engr-in-Charge. |
| 64 | S&F PVC (SWR) vent cowl 110mmcomplete all as specified & directed by Engr-in-Charge. |
| 65 | S&F in repair 75mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified & directed by Engr-in-Charge. |
| 66 | S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified & directed by Engr-in-Charge. |
| 67 | S&F in repair PVC (SWR),110mmjunction single, (Single T) equal or unequal complete all as specified & directed by Engr-in-Charge. |
| 68 | Demolition mud in roofs, any thicknes, including plastering, existing tretement and cleaning (whether full thickness removed or only or part there of) etc in all respect and preparing it for further treatment and taking out and disposal of debris & rubbish to a distance exc 1 Km but not exc 1.5 Km complete all as specified & directed by Engr-in-Charge. |
| 69 | M&L for PCC 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregate) as in roof padding, laid to a minimum consolidated thickness of 25mm as leveling course, laid and compacted in min slope 1:30 over roof complete all as specified& directed by Engr-in-Charge. |
| 70 | M&L screed laid 15mm thick in CM 1:4with water proofing compound over green concrete surface(WPC will be measured and paid seperately) surface finished even and smooth (without using extra lime or cement) complete all as specified& directed by Engr-in-Charge. |
| 71 | M&L applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq. mincluding cleaning surfaces over bituminious primer complete all as specified & directed by Engr-in-Charge. |
| 72 | M&L APP based plymeric membrane minimum weighing 3 Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt not less than 150 gms/sqm) land on primed surface by forced application complete all as specified. |
| 73 | Preparation of roof top surface, providing and applying UV stable single component smart care damp proof ultra is a fibre reinforced elastomeric liquid applied water proofing membrane formulated with PU hybrid polymers and reinforcing acrylics fibre and having SRI of 106 on top of concrete roof surface in three coats incl self primer at ratio of damp proof and water 3:1 and coverage @ 1 Ltr/10 Sqm with a thickness of 650 micron. Note :- 6 Hrs interval between two coats will be maintain & the work will be carried out through company applicator duly get approved from Accepting officer in writing before incorpotion and paid only after receiving of the warrenty certificate from the company. Make:- Dr Fixit, Asian paint or equivalent as approved by GE. |
| 74 | Supply only Integral waterproofing compound. |
| 75 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards /slabs/ blankets/ AC boards, any thickness, including cover fillets and removing from site all as specified. |
| 76 | M&L false ceiling with ArmGyp-FB ceiling tiles of 595 x 595 (as approved by GE) fixed with and including galvanised iron powder coatedinverted "T" or "L" section (concealed GI frame work) of mettalic or equivalent suspended from ceiling with provn of galvanisedwire 4 mm dia and wall taping screw including butterfly clip, hold down clips for fixing the board to frame complete all as per manufacurers instructions all as directedand specified. (a) size of main tee 39 x 24.4 x 0.8 mm (b) size of wall angle 22.2 x 22.2 x 0.65 mm(c) size of grid 0.61 x 0.61 mm |
| 77 | M&L for false ceiling with Armgyp-FB ceiling tiles of size 595 x 595mm, 9mm thick (as approved by GE) fixed with existing frame work fixing the board to frame complete all as per manufacurers instructions complete all as directedand specified. |
| 78 | Excavation in post holes in soft loose soil (similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth aroundin layers not exc 25cm, watering and removing surplush soil to a distance n exc 50m and making good surface complete all as directed by Engineer-in-charge and all as specified. |
| 79 | M&L for PCC Type C2 1:3:6 (40 mm graded aggregate) Cement concrete in foundations, filling and mass-concrete complete all as specified & directed by Engr-in-Charge. |
| 80 | Dismantling framed timber scantlings 40 sqcm and over in section, in any position complete all as specified. |
| 81 | S&F MS steel work in tubulartrusses and tubular posts including special shaped washers etc., complete using but welded.RHS/SHSconfirming to IS 4923 : 1997 with one shop coat of zinc chromate primer paint. |
| 82 | M&L for roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. Fe 410 W (Gde E-250) Quality B, complete all as specified & directed by Engr-in-Charge. |
| 83 | S&F for mild steel screw boltsdia of Neck 5mm to 10mm(machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut,exc 5cm but n exc 10cm long compleete all as directed by Engr-in-charge. |
| 84 | M&L for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachmentFe 410 W (Gde E-250) quality "B", complete all as specified & directed by Engr-in-Charge. |
| 85 | Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed by Engineer-in-charge and all as specified. |
| 86 | Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified & directed by Engr-in-Charge. |
| 87 | S&Fpre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws etc complete all as specified & directed by Engr-in-Charge. Make : JSW/Tata Steel / RINL. |
| 88 | M&L 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with L & J type hook and cranked complete all as specified. |
| 89 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) n exc 1.5 sq.each & removing to store. |
| 90 | Taking down chowkats or frameswith shutters (without taking off shutters from the frame exc 1.5 sq. m but n exc 4 sq m each & removing to store. |
| 91 | S&F 35mm thick 2nd class hard wood factory made panelled door shutter(two panel) with lock rail and panelof 9mmBWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. the size of rail and stiles as per IS: 1003 (part-I), kiln seasoned and chemically pressure treated and fixed to chowkats complete all as specified& directed by Engr-in-Charge. Make : Pioneer, Surbhi metal, A-1 Teak. |
| 92 | S&F 35mm thick 2nd class hard woodGlazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (a); supplied and fitted to chowkats complete all as specified& directed by Engr-in-Charge. Make : Pioneer, Surbhi Metal, A-1 Teak. |
| 93 | M&L solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, suppling & fixing in opening as per specification & drawing. |
| 94 | M&L Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified& directed by Engr-in-Charge. |
| 95 | M&L for preparation of new wooden surfaces over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified& directed by Engr-in-Charge. |
| 96 | M&L for preparation of old wooden surfaces over 10cm width or girth andapplying one coat of synthetic enamal paint (of approved shade) complete all as specified& directed by Engr-in-Charge. |
| 97 | S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanized wire staples complete all as specified and directed. |
| 98 | S&F butt hinges 100mm long medium weight, colled rolled mild steel complete all as specified& directed by Engr-in-Charge. |
| 99 | S&F 150mm aluminium anodisedbarrel tower bolts of extruded section and fixedcomplete all as specified & directed by Engr-in-Charge. |
| 100 | S&F 150mm Aluminium handles, cast type, anodised complete all as specified & directed by Engr-in-Charge. |
| 101 | S&F 300mm aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixedcomplete all as specified & directed by Engr-in-Charge. |
| 102 | S&F in repair stainless steel drapery rod 25mm dia (in lengths directed) of approved colour with and including decorative bowel at both ends and pair of power coated stainlesssteel brackets fixed at both ends with pvc Rawl plug and steel screwed on walls/beamcomplete all as specified & directed by Engr-in-Charge. |
| 103 | S&F 300mm Helical/rat tail door Spring 300mm size with MS sheet wing pattern including roller plate complete as directed by Engineer-in-charge |
| 104 | M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steelsheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete & making good the floor in PCC 1:2:4 type B-0 to match the existing floor.Fe-410 (Gde-E250 quality A). |
| 105 | S&F Flat iron hold fast 25mm x 5mm welded to angle iron door frame as directed by Engr-in-Charge. |
| 106 | S&F anodized aluminium frame and other sections for doors, windows, ventilators, partitions, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) with one or more rebates including joining cleat for fixing etc. complete all as specified & as directed. |
| 107 | S&F anodized aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m, powder coated of any colour as approved (thickness or powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21 100mm long (2 Nos), suitable handle (1 No) complete all as specified & as directed. |
| 108 | S&F forpowder coated of any colour as approved anodised aluminium grill of approved pattern for windows/ ventilators/doors complete all as specified and directed. |
| 109 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified. |
| 110 | S&F sheet glass ordinary quality,in squares n. exc. 0.5 SQM each 4.80 mm thick complete as directed by Engineer-in-charge |
| 111 | Hacking out old broken glass of any thickness/size of any description from aluminium/ steel frame and M&L 3mm thick Sheet glass,ordinary quality and glazing with oil putty in n exc 0.5 sq. m in each pane complete all as specified. |
| 112 | M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with cratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified. |
| 113 | M&L for providing cement concrete 1:3:6 type C-1 concrete, using 20mm graded stone aggregate as in water throughs, surface channels of drains and manhole benching including finishing the top of benching even and smooth using extra cement complete all as directed. |
| 114 | Cleaningof all blockages of Nahani trap/floor trap, bottle trap, gully trap, P or S traps of WCs, 100 mm/75 mm dia CI pipe stacks upto 1st Manhole, CI/SGSW pipe between gully trap & 1st Manhole, CI Tee/Door bends etc to maintain internal sewage system in the area of AGE B/R - II (City area) with and including manual/pressure cleaning pump & flexible rods and other necessary equipments complete all as specified and directed by Engr-in-Charge. Note : (i) Contractor or his authorised representative collect such type of complaints from AGE B/R-I complaint cell at 8.30 AM on daily basis except sunday/Holiday. No extra payment shall be made on account of collection of complaint. (ii) Complaint must be completed within 24 hours without any fail otherwise recovery shall be made double the market rate to the Contractor. |
| 115 | Cleaning of Sewage line of 100mm bore from gully traps, grease traps etc. upto 1.5 m deep by removing all filtn/silt, foreign materials and other deposits whatsoever completely and making the line free from all obstacles and testing the flow of sewer line evenly, smoothly by filling water. The cleaning operation will be carried out in suitable lengths by blocking the first and last manholes of sewage line and removing the silt/sludge & other deposits out side of MD land in covered van/trolley, all as specified & directed. |
| 116 | All as per item No 115.00 above but sewage line of 150 mm bore and depth of sewage line upto 1.50 m. |
| 117 | Cleaning of septic tank of any capacity or description including cleaning and pumping out fluid, cleaning of sludge from compartment of septic tank including intercepting chamber & washing down with water complete and removing the sludge in covered van/trolley out side the defence land complete all as directed. |
| 118 | Cleaning of manholes depth upto 1.5 mtr by removing all silt, sludge, any other materials making clean and flushing with water complete incuding removal of spoils out side MD land and taken out cover slab and reset in the same position after cleaning and testing all as specified and directed. cleaning shall be done either manually or mechanically as required and directed by Engineer-in-Charge. |
| 119 | All as per item No 118.00 above but depth exceeding 1.5 m and not exc 3 m deep complete all as specified and directed. |
| 120 | Demolition of reinforced cement concrete as in cover/slab of manhole/septic tank/soakage wellall a specified & directed by Engineer-in-Charge. |
| 121 | M&L for precast RCC 1:2:4 type B-1(using 20mm graded stone aggregate) for manhole cover including placing and set in CM 1:4 all as specified. |
| 122 | S&F for 75mm thick steel fibre reinforced (SFRC) manhole cover with iron frames (medium ) complying to the standard specifications as mentioned in the IS 12592 BIS Standard minimum load bearing capacity 5 Ton /Sqm in square rectangular or circular shape complete all as specified and directed by Engr-in-Charge. |
| 123 | S&F for 50mm thick steel fibre reinforced (SFRC) manhole cover with iron frames (medium ) complying to the standard specifications as mentioned in the IS 12592 BIS Standard minimum load bearing capacity 3 ton /Sqm in square rectangular or Circular shape complete all as specified and directed by Engr-in-Charge. |
| 124 | M&L mild steel (TMT bar) 6 to 8 mm dia and over cut to length bent to shape reqd, incl, cranking benching spirally for copying for columns hooking ends and bending with and including MS wire annealed wire not less than 0.9 mm dia. |
| 125 | M&L mild steel (TMT bar) 10mm dia and over cut to length bent to shape reqd, incl, cranking benching spirally for copying for columns hooking ends and bending with and including MS wire annealed wire not less than 0.9 mm dia. |
| 126 | M&L for use and waste of form work to soffits of suspended slabs such as roof slab, floor slabs, landings and similar work,n.exc 200mm thick flat, rough finished surfaces of cencrete complete all as specified and directed. |
| 127 | M&L form wok to edges of concrete flats, treads, breaks in floors, windows cills, concrete railings, floor and roof n.exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide complete all as specifed and directed. |
| 128 | M&L M-25 RCCusing 20mm graded stone aggregate in slabs sopported on walls, beams and columns in floors, roofs, soak well, septic tank slabetc complete all as specified anddirected. |
| 129 | Demolition and breaking up drain pipes 150mm dia (salt glazed ware AC or reinforcement concrete set in cement mortar. |
| 130 | M&L 150 mm Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed. |
| 131 | M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate for 150 mm dia bore drain pipe for bed concrete including packing under and hunching against the sides of pipe after they are laid and tested complete all as specified and directed |
| 132 | S&F mild steel joist angle channel or tee sections and fix independently in concrete as fencing posts and similar work confirming to Fe 410 or Fe -310-0. |
| 133 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out any type of soil complete |
| 134 | All as per item No 133.00 above exc 1.5 m deep and not exc 3 m deep. |
| 135 | Returning filling in including spreading, levelling watering and well ramming in layers not exc. 25 cm using excavated soil. |
| 136 | Removing excavated soil not exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point. |
| 137 | Cutting into existing manholes for new drains, for removing existing branch drain, making good to walling and rendering cutting out branch channel and making good benching (bore of pipe 150 mm). |
| 138 | S&F in repair grating doom 100 mm dia of PTMT (Minimum weight 25 gms)fixed with cementcomplete all as specified & directed by Engr-in-Charge. |
| 139 | S&F reinforced concrete pipes, class NP2, laid and jointed complete with collars bore in pipe in 300mm complete all as specified and directed. |
| 140 | Dismantling posts or struts (wood, steel or RCC) embedded in concrete,brick work,masonary etc any section, including taking out embedded portion and making good disturbed ground. |
| 141 | Dismantling structural steel work including door gate but excluding frame trusses making goods staples. |
| 142 | Fixing only chain link fencing including line wire any meshsize and type to any type of standards rails, straining bolts etc inlcluding provision of binding wire |
| 143 | Supply only MS galvanised chain link fencing any size or type weight not exc 4.00 Kg. |
| 144 | S&F mild steel MS round bar 10mm dia and over cut to length bent to shape required including cranking bending hooking etc and binding with MS wire 0.9 mm dia (annealed). |
| 145 | S&F in repair galvanised 2 strand, steel barbed wire 2.24mm dia barbed fixed in repair with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc as directed (each line wire to be measured). |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
