|
| 1 | Excavation in foundation trenches etc. in earth work in all kinds of soils such as pick work , jumper work, pick work,pick jumper blasting work, blasting work in soft and hard rock conglomrate rock or saturated soil and its intermediate classification of soil including chiseling/wedging out of rocks (where blasting is prohibited) and pumping or bailing out of watering/dewatering upto any lift stacking the excavated soil clear from the edge of excavation and then returning the stacked soil in layers when required into plinth sidesof foundations consolidation each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed by the Engineer-in charge within any leads including carriage of materials with in all leads, lifts and other incidentals. |
| 2 | Providing and laying in position cement concrete 1:4:8 (one cement : four coarse sand: eight graded stone aggregate) 40 mm nominal size (fourty millimetre) of specified grade excluding the cost of centering and shuttering, all work up to plinth level including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge. |
| 3 | Providing and laying in position cement concrete 1:5:10 (one cement : five coarse sand: ten graded stone aggregate) 40 mm nominal size (fourty millimetre) of specified grade excluding the cost of centering and shuttering, all work up to plinth level including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge. |
| 4 | Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm (Five centimetre to twenty centimetre), in recharge pit under floor, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form for : including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge. Foundations, footings, bases of columns, etc. and mass concrete |
| 6 | Columns, pillars, Posts and struts, Square, rectangular or polygonal in plan |
| 7 | Beams, cantilever, girders and lintelssides and soffits of beams, beam hunching, cantilevers, bressumers and lintels in anydepth in all heightfrom floor.. |
| 8 | Stair cases with sloping or stepped soffits excluding landing |
| 9 | Flat surfaces such as soffits of suspended floors, roofs, landings and the likeFloors etc upto anythickness. |
| 10 | Edges of slabs and breaks in floors and walls in any width. |
| 11 | Making plinth protection 50mm (fifty millimetre) thick of cement concreten1:3:6 (one cement : three coarse sand: six graded stone aggregate 20 mm (twenty millimetre)nominal size) over 75mm (seventy five millimetre) thick bed of dry brick ballast 40 mm (fourty millimetre) nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge. |
| 12 | Providing and laying local stone over plinth protection laid over and jointed with grey cement slurrycomplete with base of cement mortar 1 : 4 (one cement : four coarse sand).: average thickness 20mm (Twentymillimetre)including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge. |
| 13 | Providing, laying and jointing 23 cm dia (twenty three centimetre diametre) half round glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (one cement : one fine sand) including carriage of material and testing of joints etc. complete with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge. |
| 14 | Providing, hoisting and fixing above plinth level upto any floor level precast reinforced cement concrete in mouldings as in cornices, windows sills etc, including setting in cement mortar 1:3 (one cement : three coarse sand) cost of required centering, shuttering but, excluding the cost of reinforcement, with 1:1.5:3 (one cement : one point five coarse sand : three graded stone aggregate) 20 mm (twenty millimetre) nominal size including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge. |
| 15 | Providing, hoisting and fixing above plinth level upto any floor level precast reinforced cement concrete in vertical & horizontal fins, individually or forming box louvers, setting in cement mortar 1:2 (one cement : two coarse sand), including the cost of required centering, shuttering but , excluding the cost of reinforcement, with 1:1.5:3 (one cement : one point five coarse sand : three graded stone aggregate) 20 mm (twenty millimetre) nominal size including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge. |
| 16 | Providing and laying in position machine batched and machine mixed design mix M-25 ( M-Twenty five) grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. All works upto plinth level including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge. |
| 17 | Providing and laying in position machine batched and machine mixed design mix M-25 ( M-Twenty five) grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. All works above plinth levelupto any floor level including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge. |
| 18 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all completeincluding cost of binding wire up to anylevel as perthe directions of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals .:Thermo - Mechanically Treated bars of grade Fe-500D or more including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.upto plinth level |
| 19 | Above Plinth level up to any floor level. |
| 20 | Coursed rubble masonry (second sort) with hard stone in foundation and plinth with cement mortar 1:6 (One cement : six coarse sand) including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge. |
| 21 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). First class deodar wood including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge. |
| 22 | Providing 40x5 mm (forty x five millimetre) flat iron hold fast 40 cm (forty centimetre) long including fixing to frame with 10 mm (ten millimetre) diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm (thirty x ten x fifteen centimetre) 1:3:6 mix (one cement : three coarse sand : six graded stone aggregate 20mm (twenty millimetre) nominal size) including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge. |
| 23 | Providing and fixing Heat Resistant Terrace Tiles 300 mm x 300 mm x 20 mm (three hundred millimetre into three hundred millimetre into twenty millimetre) with SRI (solar refractive index) > 78 (greater than seventy eight), solar reflection > 0.70 (greater than zero point seven zero) and initial emittance > 0.75 (greater than zero point seven five) on waterproof and sloped surface of terrace, laid on 20 mm (twenty millimetre) thick cement sand mortar in the ratio of 1:4 (one cement : four coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1(one white cement : one marble powder), including rubbing and polishing of the surface upto 3 (three) cuts complete, including providing skirting upto 150 mm (one hundred fifty millimetre) height along the parapet walls in the same manner including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge. |
| 24 | Stone work ashlar punched (ordinary) in superstructure upto floor any level in cement mortar 1:6 (one white cement : six coarse sand) including pointing with cement mortar 1:2 (one white cement : two stone dust) with an admixture of pigment matching the stone shade including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge. |
| 25 | Marble stone flooring with 18 mm (eighteen millimetre) thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (twenty millimetre) (average) thick base of cement mortar 1:4 (one cement : four coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : Makrana white second quality including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge. |
| 26 | Providing edge moulding to 18 mm(eighteen millimetre) thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.: Marble workincluding carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge. |
| 27 | Providing and laying full body Vitrified tiles out of single piece riser 15 x 150cm (fifteen x one hundred fifty centimetre)with anti skid pattern matt finish in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % (zero point zero eight percent) and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm (tweleve millimetre) thick bed of cement mortar 1:3 (one cement : three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (at the rate three point three kilogram per square metre) including grouting thejoint with white cement & matching pigments etc. complete including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge. |
| 28 | Providing and laying full body vitrified floor tiles out of single piece tread 30 x 150 cm(thirty x one hundred fifty centimetre) with anti skid pattern (with matt finish) of approved shade of jhonson/kajaria/AGL/RAK or equivalent, (thickness to be specified by the manufacturer) with water absorption less than 0.08% (zero point zero eight percent) and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm (twenty millimetre) thick cement mortar 1:4 (one cement : four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (at the rate three point three kilogram per square metre) including grouting the joints with white cement and matching pigments etc., complete including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge. |
| 29 | Providing and laying Full Body vitrified floor tiles in different sizes with water absorption less than 0.08%(zero point zero eight percent) and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm(twenty millimetre) thick cement mortar 1:4 (one cement : four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (at the rate three point three kilogram per square metre) including grouting the joints with white cement and matching pigments etc., complete:10mm (ten millimetre) thick full body vitrifed tiles of Size of60x60cm (sixty into sixty centimetre) ofapproved shade of Simplo Ceramics/ AGL tiles / Kajaria / Orient Bell or equivalent including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge. |
| 30 | Providing And fixing glazed full body vitrified tile of approved Shade and manufacturer in skirting risers of steps and dado 12 mm (twelve millimetre) thick cement mortar 1:3(one cement :three coarse sand ) and jointed with cement slurry complete :10mm (ten millimetre) thick full body vitrifed tiles of Size of60x60cm (sixty into sixty centimetre) ofapproved shade of Simplo Ceramics/ AGL tiles / Kajaria / Orient Bellor equivalent including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge. |
| 31 | Providing and fixing panelled or panelled and glazed shutters for doors , including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately):First Class Deodar wood, 35mm (thirty five millimetre) thick shutters including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge. |
| 32 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in charge. (Note:- Butt hinges and necessary screws shall be paidseparately):First Class Deodar wood, 35 mm (thirty five millimetre) thick shutters including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge. |
| 33 | Providing and fixing stainless steel (Grade 304 (grade Three Hundred four)) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge. |
| 34 | Providing and fixing 62.5 x 75mm (sixty two point five into seventy five millimetre) hand rails in 1st class Indian teak wood straight length complete including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge. |
| 35 | Providing and fixing Polished stainless steel SS 304 Grade (stainless steel grade Three Hundred four). grills of required pattern in frames ofsteel windows by welding / including all fitting accessories complete (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts,bolts, fasteners etc.). including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge. |
| 36 | Providing and fixing ISI marked Stainless steelsingle acting spring hinges with necessary screws etc. complete : 75 mm (seventy five millimetre) including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge. |
| 37 | Providing and fixing Stainless steeldouble acting spring hinges with necessary screws etc. complete.150mm (one hundred fifty millimetre) including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge. |
| 38 | Providing and fixing 16 mm (sixteen millimetre) M.S. Fan clamps of standard shape and size in existing R.C.C. slab, including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge. |
| 39 | Providing wood work in trusses,purlins,rafters,posts, post plates,wall plates and the like wrought framed,hoisted and fixed in position.:second class Deodar wood including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge. |
| 40 | Slate roofing with 7.5 cm (seven point five centimetre) lap double layer fixed on wooden battens (wood work to be paid for separately):60 cm x 30 cm (sixty centimetre x thirty centimetre) size including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge. |
| 41 | Providing and fixing ridges or hips 60 cm (Sixty centimetre) overall with 0.60mm (Zero point six zero millimetre) thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating including fixing with self drilling and self tapping fasten of size 5.5 mm (Five point five millimetre) dia and 55 mm (Fifty five millimetre) lap complete with all accessories as required as per the direction of Engineer in Charges including carriage of material with in all leads and lifts and other incidentals. |
| 42 | Providing and fixing up to floor any level precast cement concrete hollow block, including hoisting and setting in position with cement mortar 1:3 (one cement : three coarse sand), cost of required centering, shuttering complete including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge. |
| 43 | Providing and fixing Wooden plank with suitable screws for wooden plank 12 mm thick (Twelve milimetre) in ceiling etc. complete (frame work to be paid seperatately) including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge. |
| 44 | Providing and laying cement concrete - all works upto plinth level :1:2:4 (one cement : two coarse sand : four graded stone aggregate 20 mm nominal size) including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge. |
| 45 | Providing and fixing in wall lining / paneling /dado withpanels of 12 mm (twelve millimetre)thick MARINE PLY ISI marked with 4 mm (four millimetre) thick veneers laminates ( Teak ply ) to be polished orflat pressed three layer (medium density) particle board or graded wood Pre-laminated one side decorative lamination and other side balancing lamination Grade I, Type II, IS : 12823 marked, along with wood frame work consisting of battens 4cmx4cm (four centimetre x four centimetre) size60cm (sixty centimetre) centre to centre spacingboth sides fixed with rawl plug and drilling necessary holes for rawl plug etc.and Decorative first class kiln seasoned teak wood beading out of 25x12mm (twenty five x twelve millimetre) section with wood screws including mitring at junctions andDecorative first class kiln seasoned teak wood cornice out of 75x60mm (seventy five x sixty millimtre)section with wood screwsto be polished including priming coat on unexposed surface, with necessary fixing arrangement and screws etc. including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge. |
| 46 | Providing and fixing machine carved balluster of hard wood out of 60mm dia. (sixty millimetre diametre) fixed with ends housed (square or splay) to hand rails and treads or strings complete in First class indian teak wood including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge. |
| 47 | Providing and fixing 25mm + 25mm (twenty five millimetre plus twenty five millimetre)balusters 25mmx25mm (twenty five millimetre into twenty five millimetre)square wrought fixed with ends housed (square or splay) to hand rails and treads or strings complete inFirst class indian teak wood including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.(For suspenders hanging from eaves board). |
| 48 | 40 mm (forty millimetre) wooden planking, tongued and grooved in flooring, including fixing with iron screws complete with :First class Deodar wooden planks of size4cm x 20cm (four centimetre into twenty centimetre) including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge. |
| 49 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16mm (two hundred fifty into sixteen millimetre) size including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge. |
| 50 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.200 x 10mm (two hundred x ten millimetre) size. |
| 51 | 150 x 10 mm(one hundred fifty x ten millimetre) size. |
| 52 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.125mm (one hundred twenty five millimetre) size. |
| 53 | 100 mm (one hundred millimetre) size. |
| 54 | Providing eaves board 200mmx25mm(two hundred millimetre into twenty five millimetre)including fixing in position including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge. |
| 55 | Providing andlaying 15mm (fifteen milimetre) cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering up to all floor level includingarises, internal rounded angles,chamfers and/or rounded angles not exceeding 80mm(eighty milimetre) in girth and finished even and smooth in cement mortar 1:6 (one cement:six sand) including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge. |
| 56 | 6mm (Six millimeter) cement plaster to ceiling in cement mortar 1:3 (one Cement : three Sand) including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge. |
| 57 | Providing and applying white cement based putty of average thickness 1 mm (one millimetre) of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge. |
| 58 | Finishing walls with 100%(one hundred percent) Premium acrylic emulsion paint having VOC less than 50 gm/litre (fifty gram per litre) and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additivesNew work (Two or more coats applied @ 1.43 litre/ 10 sqm.(at the rate one point four three litre per ten square metre) Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.(at the rate zero point nine zero per ten square metre) including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge. |
| 59 | French spirit polishing :Two or more coats on new works including a coat of wood fill including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge. |
| 60 | Providing and fixing 15 cm (Fifteen centimetre) wide, 45 cm (Forty five centimetre) overall semi- circular plain G.I. sheet gutter with iron brackets 40 x 3mm (Forty into three millimetre) size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete with 0.63 mm (Zero point six three millimetre) thick with zinc coating not less than 275 gm/m2 (Two hundred seventy five gramms per square metre) including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge. |
| 61 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (Ten millimetre) gap for thermal expansionSingle socketed pipes 110 mm (One hundred ten millimetre) diameter including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge. |
| 62 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (Ten millimetre) gap for thermal expansion including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.Bend 87.5° (Eighty seven point five degree) 110mm(One hundred ten millimetre) |
| 63 | Shoe 110mm (One hundred ten millimetre) |
| 64 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (zero point five zero millimetre) (+0.05 %) (plus zero point zero five percent) total coated thickness, Zinc coating 120 grams per sqm (one hundred twenty grams per square metre) as per IS: 277, in 240 mpa (two hundred forty megaPascal) steel grade, 5-7 microns (five to seven microns) epoxy primer on both side of the sheet and polyester top coat 15-18 microns (fifteen to eighteen microns) using self drilling/ self tapping screws complete :Flashings/ Aprons.( Upto 600 mm(six hundred millimetre)) . including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge. |
| 65 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm (at the rate zero point nine zero litre per ten square metre) over an under coat of primer applied @ 0.80 ltr/ 10 sqm (at the rate zero point eight zero litre per ten square metre) of approved brand and manufacture including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge. |
