Up-Gradation Of 33 Kv Main Bus Bar From Single Moose To Twin Moose Acsr Conductor At 132 Kv S / S Maurawan Under Etd, Unnao-2 Supply Of 05 Nos. U-Bolted Type Single Tension Fitting Assembly With Turn Buckle, Suitable For Twin Acsr Moose Conductors And 33 Kv Bus Bar Disc Insulator String Comprising Of 04 Nos. 70 Kn Disk Insulator, Complete With Hardware Fitting, D-Shackle, Socket Eye, Ball Hook, Yoke Plate, D-Clip, Tension Clamp Etc, As Per Technical Specifications & Sample. 3 Supply Of 05 Nos. U-Bolted Type Single Tension Fitting Assembly Without Turn Buckle, Suitable For Twin Acsr Moose Conductors And 33 Kv Bus Bar Disc Insulator String Comprising Of 04 Nos. 70 Kn Disk Insulator, Complete With Hardware Fitting, D-Shackle, Socket Eye, Ball Hook, Yoke Plate, D-Clip, Tension Clamp Etc, As Per Technical Specifications & Sample. 4 Supply Of Spacer Suitable For 33 Kv Bus Bar Of Twin Acsr Moose Conductor With 250 Mm Spacing And Duly Made Of Lm-6 Aluminum Alloy, Complete With 12Mm Dia Hdg Bolts, Nuts, Spring & Plain Washer As Per Technical Specification & Sample. 5 Supply Of Pg Clamp Duly Made Of Lm-6 Aluminum Alloy Suitable For Acsr Moose To Acsr Moose Conductor Complete With 04 Nos. 16-90Mm Size G.I. Bolts, Nuts, Spring & Plain Washers As Per Technical Specifications & Sample. 6 Supply Of Pg Clamp Duly Made Of Lm-6 Aluminum Alloy Suitable For Acsr Moose To Acsr Panther Conductor Complete With 04 Nos. 16-90Mm Size G.I. Bolts, Nuts, Spring & Plain Washers As Per Technical Specifications & Sample. 7 Supply Of 33 Kv Isolator Bi-Metallic Terminal Connector Duly Made Of Lm-6 Aluminum Alloy Suitable For Twin Acsr Moose Conductor Complete With 04 Nos. 12Mm Size G.I. Bolts, Nuts & Spring / Plain Washers As Per Technical Specifications & Sample. 8 Work 9 Following Works Are To Be Carried Out At 132 Kv S / S Maurawan, Unnao For Capacity Up-Gradation Of 33 Kv Main Bus Bar By Replacing Existing 33 Kv Main Bus Bar Single Moose Acsr Conductor By Twin Moose Acsr Conductor Alongwith Associated Works All Cost Of Men, Misc. Consumables, T&P Etc. To Complete The Job Satisfactorily. 10 Opening Of Old & Existing Jumpers Of Acsr Panther / Moose Conductor Between Old Main Bus To Bus Isolator And 33 Kv Side Bay Of 132 Kv Transformer I & Ii, 01 Nos. Station Transformers Bays, 01 Nos. Capacitor Bank Bays, 11 Nos. 33 Kv Bays Alongwith 01 Nos. 33 Kv Bus Section Isolator, 06 Nos. Pts ( 01 Job For Each Jumper ) 11 Dismantling Of Old & Existing 33 Kv Main Bus Bar Sections Of Moose Conductor Of Span 24 / 24 / 18 Meter After Opening The Tension Fitting From Gantry, Lowering Down The Bus Bar Etc. Including Shifting Of Old Conductor / Fittings Etc. From Switchyard To Sub-Station Store. ( 1 Job Per Phase Per Section ) 12 Erection Of New 33 Kv Bus Bar Of Span 24 / 24 / 18 Meter By Laying And Stringing Of Acsr Moose Twin Conductor Including Hoisting Of Disc Insulator Strings & Tension Fitting Etc. To Be Provided By Department After Due Cutting / Fixing Of Conductors Of Required Size Upto Bus Section Isolators, Fixing Of Spares Etc. To Complete The Work Satisfactorily Including Shifting Of All Materials From Store To Switchyard. ( 01 Job. Per Phase Per Section ) 13 Fixing Of 250Mm Size Spacers Between Above Laid 33 Kv Main Bus Bar Conductor Of Twin Acsr Moose Conductor. ( 01 Job. For Each Spacer ) 14 Jumpering Of Twin Panther / Moose Conductor As Per Standard Specification In Between New Main Bus To Bus Isolator And 33 Kv Side Bay Of 132 / 33 Kv Transformer-I & Ii, 01 Nos. Station Transformers Bays, 01 Nos. Capacitor Bank Bays, 11 Nos. 33 Kv Bays Alongwith 01 Nos. 33 Kv Bus Section Isolator, 06 Nos. Pts By Proper Cutting, Bending & Tightening Of Conductors Using Necessary P.G. Clamps & Equipment Connectors To Be Provided By Department. ( 01 Job. For Each Jumper ) .
