Public Works Department-PWD has published Re-Construction Of Auditorium Hall At Bhss Kalaroose. Submission Date for this Tender is 12-07-2022. Auditorium Construction Tenders in Kupwara Jammu And Kashmir. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Earth work in excavation by manually/mechanicallymeansin Trenches for foundation, drains, pipes, cables etc. (not exceeding 1.5 m in width)and for shafts ,wells, cesspits and the like not exceeding 10 Sqm on plan, depth up to 1.5 mtr including disposal of excavated earth up to 1M from cutting edge , disposed is to be leveled and neatly dressed in. All kinds of soil |
2 | Supply and laying of dry stone soling hand packed in foundation of trenches etc incl. all costs andcarriages up to site of work complete. |
3 | Providing and laying inposition cement conc,.of specified grade excluding the cost of centering and shuttering.All work upto plinth level in 1:4:8(1cement: 4 course sand: 8 graded stone agg) 20mm nominal size crushed including all carraiges of material from soure to site of work complete |
4 | Providing and laying inposition cement conc,.of specified grade excluding the cost of centering and shuttering.All work upto plinth level in 1:3:6(1cement: 3 course sand: 6 graded stone agg) 20mm nominal size crushed includingincluding all carraiges of material from soure to site of work complete |
5 | Centring & shuttering, including strutting, propping etc and removal of form for:-Foundations, footings , bases of colums etc for mass concrete |
6 | Structural steel work welded in built up sections for roof ,trusses vertical posts runners struts , flat iron including cutting, weldedhoisting, fixing in position and applying a priming coat of approved steel primer andall carriages of material from source to site of work complete. |
7 | Providing and fixing of wall panel 50mm thick (Puff Panel) and width 1m or more insulated thick panel with 0.50mmPPGI sheet both 40+2Kg density |
8 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge for fxied protion powder coated aluminum (Minimum thickness of powder coated 50 microns) (100 x100mm) as per directions of incharge Engineer |
9 | For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.)powder coated aluminum (Minimum thickness of powder coated 50 microns) (40 x40mm) as per directions of incharge Engineer |
10 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-incharge. Pre-laminated particle board with decorative lamination on one side incl. all carraiges complete job. |
11 | Providing and fixing 5mm thick glass pans including all fittings /fixtures and all carraiges from source to site of work complete job |
12 | Providing and fixing sliding soor lockes complete |
13 | Supply and filling in plinth in nallah muck under floors including waterringand compacting consoliadtion incl. . all carriages ofmaterials from source to site of work complete job. |
14 | Centering and shuttering incl. strutting prooping etc and removal off form work ncl. Carriage foundation footings and bases of columns etc |
15 | Providing and fixing of12mmthick ply board ceiling including cost of wooden frame workincluding all fittings and fastening complete job |
16 | 50mm thick cement conc.flooring1:2:4(1cement: 2 course sand: 4 graded stone agg) finished within a floating coat of neat cementincluding cement slurry but excl.the cost of nosing of steps etc compelte with 20mm nominal size stoneagg(crushed)incoluding all carriages |
17 | Painting with synthetic enamel paint of approved brand and manufactureto give evan shade in two or more coats on new work incl. primer coat of ready primer |
18 | Providing corrugated G.I. sheets roofing fixed with polymer coat J or L hooks and G.I Limpet washers fitted with white lead and including a coat of approved sheet primer and two coats of approved paint on over lapping of sheet complete(up to a pitch of 60 degree (excluding the cost of purloins rafters and trusses.(ii)0.50mm thick with zinc coating not less than 275gm/sqm |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail