|
| 1 | PART-AEarthwork: Excavation in trenches for foundations,pipes cables etc. in ordinary soil (Loam, Clay or Sand) including lift upto 1.5 m lead upto 50m and drassing of sides and ramming of bottom disposal of surplus excavated earth as directed by Engineer- in- charge with lead of 50 m . (PWD SI No-251)2022 (a) 0 to 1.5m |
| 2 | E/W in Cutting or in embankment in ordinary soil excavation to be done in form of regular pits not exceeding 1/2 M in depth and work embankment to be in 20cm layers including ramming and dressing the surface to required level and slopes and also including 1.5 M lift and 30M lead. The earth from cutting to be used in making embankment or to be deposited as spoil banks with 30m distance as directed by the Engineer incharge with 8 Km cartage including. (SI No. 253A+ 231(a)/2022 |
| 3 | Concrete with 4cm. Guage brick ballast fine sand of 1.25 :M. and cement in proportion of 12:6:1 in foundation and under floors including supply of all meterials, labour and T&P etc. required for proper completion of work. SI No. 273-2022 |
| 4 | Providing and laying in cement concrete in 8:4:1 ( stone ballast 8 (40 mm nominal size) : 4 approved coarse sand : 1 cement and curing complete, including cost of formwork in foundation. (PWD S.I No- 281)2022 |
| 5 | RCC work with cement approved coarse sand and 2cm (3/4\")gauge approved stone ballast in the proportion 1:1½:3 (1 cement : 4½ aggregates) in raft foundation and footing excluding of reinforcementincluding its bending the same with 24 BWGbinding wire and necessary centering & shuttering etc and also including supply of all material, labour, T&P etc. required for proper completion of work.(SOR No 287 +283A-283/2022 |
| 6 | Class-150brick work in 1:4 (1 cement : 4 coarse sand ) in Foundation & Plinth including supply of all material, labour, T&P etc. required for proper completion of work . (PWD S.I No.307 /2022 |
| 7 | 40mm thick damp proof coarse cement, coarse sand & 20mm thick stone grit 1:2:4 and approved water proofing material as ordered by the Engineer-in-charge in the proportion as specified by the manufacturer including supply of all materials, labour and T&P etc. required for proper completion of the work and including proper curing & shuttering as necessary. Item No. 361(c)/2022 |
| 8 | Painting on D.P.C. with two coat of air blown bitumen 80/50 or 85/25@ about 1.7 Kh/Sqm including cost of fuel if any. New item no1/chap.7/2022 |
| 9 | RCC work with cement approved coarse sand and 2cm (3/4\")gauge approved stone ballast in the proportion 1:1½:3 (1 cement : 4½ aggregates)including necessary centering & shuttering excluding supply of reinforcement and its bending the same with 24 BWG GI binding wire and necessary centering & shuttering excluding supply of reinforcement and complete.(A) For column work.(PWD S.I No- 289)2022(i) Ground Floor and First Floor |
| 10 | (ii) Second Floor |
| 11 | (iii) Third Floor & Mumty |
| 12 | (B) For Lighter beam (S.I. 285/2022) (i) Ground Floor and First Floor |
| 13 | (ii) Second Floor |
| 14 | (iii) Third Floor & Mumty |
| 15 | (C) For Roof Slab(S.I. 284A/2022)(i) Ground Floor and First Floor |
| 16 | (ii) Second Floor |
| 17 | (iii) Third Floor & Mumty |
| 18 | (d) For lintels ( RCC mix 1:1½:3) (S.I. 283A/2022) (i) Ground Floor and First Floor |
| 19 | (ii) Second Floor |
| 20 | (iii) Third Floor & Mumty |
| 21 | Mild steel (Tor steel or plain) or iron in plain work such as reinforced concrete or reinforced brick work (when not included in an overall rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised overlapping shall be measured up to floor two level . (PWD S.I No- 504)/2022(i) Ground Floor and First Floor |
| 22 | (ii) Second Floor |
| 23 | (iii) Third Floor & Mumty |
| 24 | Class-150brick work in 1:4(1 cement : 4 coarse sand ) in super structure for one brick thick wal including supply of all material, labour, T&P etc. required for proper completion of work . (PWD S.I No. 307/2022(i) Ground Floor and First Floor |
| 25 | (ii) Second Floor |
| 26 | (iii) Third Floor & Mumty |
| 27 | Class-150brick work in 1:4 (1 cement : 4 coarse sand ) inin s/s for 115 mm thick wall including supply of all material, labour, T&P etc. required for proper completion of work . (PWD S.I No. 303) IN super strcure (S.I. 307(a) + 309+310(a)/2022(i) Ground Floor and First Floor |
| 28 | (ii) Second Floor |
| 29 | (iii) Third Floor & Mumty |
| 30 | Mild steel of iron work in Small sizes such asdoor, frames,etc. wrought to required form including drilling holes riveting or weliding whare necessary, and also inculiding supply of steel, bolts,S.I. No 502(b)/2022 |
| 31 | Mild Steel oriron work for fabrication of M.S grill and stair case railing wrought to required for including of supply of steel bolts nuts and wastage etc and their fixing required for proper completion of the work (PWD S.I no 502 (II) )/ 502(C ) 2022(i) Ground Floor and First Floor |
| 32 | (ii) Second Floor |
| 33 | (iii) Third Floor & Mumty |
| 34 | Supply and fixing approved (ISI) Marked Z Section double/Single leaf open able and fixing shutters steel window with required mesh bars,and wastage including supply of approved heavy quality M.S hinges handles 30 cm long stays and hold fast etc all complete. (PWD NEW ITEM -5/2022(i) Ground Floor and First Floor |
| 35 | (ii) Second Floor |
| 36 | (iii) Third Floor & Mumty |
| 37 | P/F 6mm dia threaded expention hold fasteners on C C/ RCC /Brick Masonry surface backing including drilling necessary holes and the cost of bolt etc complete ( D S R No 8.8.1.1 2021) |
| 38 | P/L in Cement Concrete4:2:1 of not less than strength of M-150 stone ballast(20mm normal size) :2 approved coarse sand:1 cement ) and curing completeincluding cost of form work supply of all material lab T&P etc all complete.(SI.No-279a.)/2022(i) Ground Floor and First Floor |
| 39 | (ii) Second Floor |
| 40 | (iii) Third Floor & Mumty |
| 41 | 12 mm cement plaster 1:4 (Cement & Coarse sand) in single coat on fair side of single or half brick wall for interior plastering including internal rounded angles chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. no extra for mixing any additive. (PWD SI.No-584/2022 |
| 42 | Forming grove of unifrom 12x12mm and upto 25x15 mm in plastered as per approved pattern using woden battens, nailed to the under layer including removsl of wooden battens, repairs to the edges of plaster panel and finishing the groove complate as per specification sna direction of the engineer-in-charge. PS |
| 43 | Making drip course in sun shades of facia 1:3cemant and fine sand mortar as per direcation of engineer-in-charge including supply of all materials, labour, Tools& Plants etc. required for propre complation of the work.ps |
| 44 | 20 mm cement plaster 1:3 (Cement & Coarse sand) in dado/skriting & over roof finished with 3 mm thick floating coat of neat cement or cement & marble dust in ratio of 5:1 including all material labour T&P all complete. S.I..-1/P36/2022 |
| 45 | Cinder filling under floor and any other sunkun portion of building including watering ramming and compaction etc all complete as per direction of E/I.(PMAY) |
| 46 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conformingto IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete. (DSR 11.38)2021 |
| 47 | Providing and laying Ceramic glazed walltiles of size 200x300 mm (thickness to be specified by the manufacturer), of 1st quality conformingto IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete. (DSR 11.38)2022 |
| 48 | Providing and fixing of glass strips in joints of floor and skirting at the time of laying floors flush with floor level including all complete etc. 37mm deep 2.8 to 3.7mm thick.(S.I. No. 631 (b)2022 |
| 49 | Providing and fixing of glass strips in joints of floor and skirting at the time of laying floors flush with floor level including all complete etc. 22mm deep 2.8 to 3.7mm thick. (S.I. No. 631 (a) 2022) |
| 50 | 40 mm thick Cement concrete flooring 1:2:4 (1cement : 2coarse sand : 4graded stone aggregate of size 20 mm nominal size )laide in one layer , finished with floating coat of neat cement.including fixing of glass strips. (excluding cost of glass strips ). item no.SOR 605/2019 |
| 51 | 25 mm thick cement concrete flooring 1:2:4 by laid of over base concerete finished with floating coat of neat cement.including fixing of glass strips. (excluding cost of glass strips ).item no. SOR 601/2022 (i) FOR Ground Floor |
| 52 | Supply and fixing of hexagonal fan box with hexagonal side of approximate 80mm in length fabrication from 16 SWG M.S sheet in corporate 10mm sheet in corporate 10mm and M.S round bar dully bent for supporting fan hanger etc all complete. SI No 1149/elctrical SOR 2019 |
| 53 | Providing and fixing 40mm diameter and 30cm long pvc pipe water spout pipe in cement mortar 1:4 cement and coarse sand mortar etc all complete. PS PMAY(i) Ground Floor and First Floor |
| 54 | (ii) Second Floor |
| 55 | (iii) Third Floor |
| 56 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surfaceto prepare the surface even and smooth complete. to prepare the surface even and smooth complete. SOR S.I. 12 page 43/2022 |
| 57 | Finishing walls with Acrylic Smooth exterior paint of required shade :13.46.1New work (Two or more coat applied @ 1.67 ltr/10 sqm overand including priming coat of exterior primer applied @ 2.20kg/ 10 sqm) DSR/13.46.1/2021 |
| 58 | Distempering two coat with oil bond distemper of approved brand and manufacture of requiredshadeon undecorated wall surface to with uneven shadevover and including a primer coat with cement primer of approved brand and manufacture such as of british,shalimar,asian. (PWD SOR 2022) (649+650) |
| 59 | Painting or Varnishingon iron works in small areas or new wood workwith one coat of ready mixpriming paint and two coat of approved superior quality ready mixed paint of learsynthetic varnish (Berger,dulux, Narolac, Shalimar) including supply of all material Labour & T&P etc. required for proper complete of work paint to be used should confirm to the ISI no.New item-1a+2+4(iii)/2022 |
| 60 | P/L of Brick Cobaaverage 120 mm thick 1:4 cementand coarse sand mortar including supply of all materials,labours and T&P etc required for proper completion of the work includingwater proofing compound and recorn synthetic etcall complete as directed by E/I new item 3/P.32/2022 |
| 61 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarsesand : 4 stone aggregate 10 mm and down gauge), including finishingwith cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :In 75x75 mm deep chase (DSR 12.21.1) |
| 62 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. (DSR 12.22) |
| 63 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a)First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours(b)Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm.This layer will be allowed to air cure for 4 hours followed with water curing for 48hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. DSR 22.5/21 |
| 64 | Supply and fixing of 32 mm thick commercial quality plywood flush door shutter conforming to IS 2202 part-1 (1983) including fixing of wooden cleats & stoppers and including fixing and adjustment of hinges bolts nuts handles springs and other fitting with necessary screws etc all complete. (S I 470/22)(i) Ground Floor and First Floor |
| 65 | (ii) Second Floor |
| 66 | (iii) Third Floor |
| 67 | Supply and fixing of oxidized iron fitting with screws for door and windows etc all complete. Sliding Bolt (250x16) as per 9.62.2/SOR 2022 |
| 68 | Handle 125mmas per 9.66.1/SOR 2022 |
| 69 | Tower Bolt (200x10) 9.63.2/SOR 2022 |
| 70 | Supply and fixing of 3.8 to 4.7 mm thick glass panes of ISI approved quality with equal or equivalentISI marks .brads and putty and springs for window and ventilator m.s section of wherever is required on other places including cartage of all items Mis new item-2(B)/2022 |
| 71 | Numbering of flats with letter/ No. writing including painting one coat of ready mixed priming paint and two coat of approved superior quality ready mixed paint including supply of all materials tools & plants etc required for proper completion of the work. |
| 72 | (Part -B)Water Supply (Internal Work) & Sanitary Work Providing & fixing CPVC pipes having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in charge. concealed work inc cutting chases and making good the walls etc withnominal outer dia pipesapproved Make (Astral, Ashirwad ,Kissan,as per ISI) Cealet work including cutting cease & making good the wall etc.20mm nominal dia DSR 18.8.2/2021 |
| 73 | 40mm nominal dia DSR 18.7.5/2021 |
| 74 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushingcistern, including flush pipe, with manually controlled device (handle lever)conforming to IS : 7231, with all fittings and fixtures complete, includingcutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan (Somany, Kajaria, Cera, Parryware, Hindware ) of size 580x440mm with integral type foot rests17.1.1/CH-22/P-52-SOR/2022 |
| 75 | Providing and fixing 110 mm dia P.V.C pipe heavy quality 6kg/sqcmworking pressure including supply of all specials clamps with wall cutting etc and other material labour T&P ctc. required for proper completion of the work. |
| 76 | S/F of 110mmdia of PVC down pipe complete with rose heads bends M.S clamps 2.5 cm X 2.5 cm X 3 mm fixed to walls by 15 cm long 6 mm dia nail including repairing of plaster, pointing etc including supply of all materials, labour T&P ctc. required for proper completion of the work.(PWD SI no 730 (a)2022 |
| 77 | S/F 100 mm dia Nahani trap India make of approved heavy quality complete with CP brass gratings Nahani trap laid over base ceoment concrete 1:6:12ISI marked including supply of all materials, labour T&P ctc. Required for proper completion of the work. (P.S.) |
| 78 | Supply and Fixing Steel jali 100mm round (P.S.) |
| 79 | Supply and hosting of 500 litre capacity(Syntex or equivalent as per ISI) ISI marked low density polyethylene seamless one piece water Storage Tank andplacing the same in proper positionincluding all taxes labour T&P etc required for proper completion of work (16 no @500 litre = 8000 litre) (PWD SI no-18.48 P-53/2022 |
| 80 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion.. (Make : Supreme / Finolex / Prince) PMAYDoor Tee 110x110x110 mm |
| 81 | Bend 110 mm |
| 82 | Supply and layingof 150mm dia PVC pipe 6kg/cm2 pressura over 10cm base of cement concrete 1:5:10 including excavation of earth and refilling including all materials, labour T&P ctc. Required for proper completion of the work. DSR-7745/2021 PAGE-67 |
| 83 | Providing and fixing 110mm PVC Terminal guard heavy quality ISI marked including supply of all materials, labour T&P ctc. Required for proper completion of the work. |
| 84 | Providing and fixing C.P. brass long body bib cock (Kingston, Glacier, Corbat, Allent, Hindware) of approved quality conforming to IS standards and weighing not less than 690 gms 15 mm nominal bore /SOR (18.51.1/P-53/2022) |
| 85 | Providing and fixing C.P. brass angle valve(Kingston, Glacier, Corbat, Allent, Hindware) for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore 15mm nominal bore SOR.NO 18.53.1 P.53/2022 |
| 86 | Construction of brick masonary inspection chambers 0.455 m x 0.610m x 0.45m as per standard designwith base concrete 1:6:12, 23 cm thick brick wall in 1:6 cement and coarse sand, plastering 1:4 cement and coarse sand with neat finish including RCC cover 8 cm thick including supply of all materials, labour T&P ctc. required for proper completion of the work. DSR-16/19.30.1/2021 |
| 87 | Construction of brick masonary inspection chamberof size 77.5 cm x 50 cm x 110 cm as per standard designwith base concrete 1:6:12, 23 cm thick brick wall in 1:4 cement and coarse sand, plastering 1:4 cement and coarse sand with neat finish including ferro cement cover fixed with RCC 1:2:4including supply of all materials, labour T&P ctc. required for proper completion of the work. DSR-16/19.29.1/2021 |
| 88 | P/F balls valve(brass) of approved qualityhigh or low pressure with plastic floats complete 20mm dia. (DSR-18.18.2) |
| 89 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 25 mm nominal boreDSR 18.17.1 |
| 90 | (Part-C) Internal Electrification Wiring point for light with 1.50 Sqmtr F.R PVC insulated multi strand copper conductor cable in PVC conduit pipe partly concealed in the wall complete with 8 SWG GI earth continuity wire,piano type switch &ceiling rose/angle/batten holder on 3 mm. thick phenolic laminated backelite sheet etc.complete in all respect,as directed.including matching colour wash (E/M SI N0-138(c)) 2018 |
| 91 | Wiring point for fan/fresh air fan/light duly exhaust fan with 1.50 Sqmm FR PVC insulated multi strand single core copper conductor cable in PVC conduct pipe .partly concealed in the wall complete with 8 SWG GI earth continuity wire,piano type switch & ceiling rose on 3 mm. thick phenolic laminated backelite sheet etc.complete in all respect,as directed.including matching colour wash (E/M SI N0-140(c)2018 |
| 92 | Wiring point for call bell with 1.5 Sq mm FR PVC insulated multstrand copper conducter cable as earthwire drawn inside the conduit in PVC conduit concealed in wall with 14 SWG copper with earth connectvity wire and piano type bell push or 2 socket etc, complete all respect including maching colour wash. SOR 135(C) |
| 93 | Wiring point for Plug with 1.50 Sqmm FR PVC insulated multi strand copper conductor cable in PVC conduct pipe concealed in the wall complete with8 SWG GI earth continuity wire,piano type switch & socket on 3 mm. thick phenolic laminated backelite sheet etc.complete in all respect,as directed.including matching colour wash. (E/M SI N0-134(c))2018 |
| 94 | Supply and fixing power plug with 15A/250 volt flush type swich and 5Pin 15A/250 volt flush type universal scoket in suitable MS Box of 175mm x100mmx50mm size with phenolic laminated backlight sheet cover 3mm thick fixed with brass machine screw and cup washer. SOR 1139/2018 |
| 95 | S/Wiring of submain with two number 2.5 sqmm FR but in 20 mm dia heavy duty same as SI 261 (B) PVC insulated multistand copper conductor cablepartly concealed in wall and partly laid in slab along with the reinforcement before concreting complete with 8 SWG GI earth continuity wire including matching colour wash ect complete in all respect. (E/M SI N0-261 C)2018 |
| 96 | S/Wiring of submain with two number 4 sqmm FR PVC insulated 1100 volts grade multistand single core copper conductor cablein 20 mm dia heavy dutyPVC conduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting complete with 8 SWG GI earth continuity wire including matching colour wash ect complete in all respect. (E/M SI N0-262C)/2018 |
| 97 | S&F of 6 Amp to 32 Amp M.C.B.(10K) SOR No 1002/2018 cat-B |
| 98 | S/F surface/flush mounting 8 ways SPN distibution board withoutMCB complete in all respect,as directed at site Engineer in charge SOR No 1024/2018 CAT-B |
| 99 | S&F of 40 Amp S.P. IsolaterSOR No 1004 (A)/2018 |
| 100 | S/L OF PVC CONDUIT COMPLETE WITH BEND 25MM DIA.SI 149(A)/2018 |
| 101 | S/Placing of MS cast iron deep junction box P.S. |
| 102 | Supply and fixing of swich box made up 16SWG (1.5mm) thick M.S. Sheet of diffrent size dully painted with red oxide primer & flused in wall including cutting of brick work fixing it to the level with cement sand mortar including maching colour wash with S/o all material labour & T&P required for proper completion of work as directed at site by the Engineer in Charge. (SOR No 159)/2018(i) 100X100X65mm (159/2018) |
| 103 | (ii) 175X100X65mm (SOR 161/2018) |
| 104 | (iii) 200X250X65mm (162/2018) |
| 105 | Supply and burying of 40 mm x 4.5 meters long G.I pipe vertically for earthing having 12 mm dia. Holes spaced 75mm apart drilled up to 2 meter from the bottom complete with ear thing lead of no-6 to 8 SWG GI wire in G.I pipe up to apron(and from apron to switch board 30 cm square CI box with hinged cover masonry enclosure funnel at top, alternate layers of charcoal/ coke and salt at least 150 mm thick around etc ap per E/I complete in all respect. (E/M SI N0-701)2018 |
| 106 | Supply and laying of 25 mm x 3mm G.I stripfor earth electrode directly in the ground as required complete in all respects(E/M S.I 716)2018 |
| 107 | PART-DExcavation in foundationin ordinary soil (Loam, clay or sand) including lift upto 1.50M. And lead upto 30M and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in-charge upto a distance of 60M from the foundation trenches.SI.-251/22 |
| 108 | Concrete with 4 cm. gauge stone ballast, coarse sand and cement in proportion of 8:4:1 in foundation and under floors including supply of all material, labour, T&P etc. required for proper completion of the work.( S.I NO. 281/CH-5/2022 |
| 109 | Cement concrete with 2 cm. gauge approved stone grit, coarse sand and cement in proportion of 4:2:1 including supply of all materials, labour, T&P etc. required for proper completion of the work.(SI.No.279A/CH-5/2022 |
| 110 | M-150 brick work in 1:4(one part of cement and four part of coarse sand of 2.2.M ) cement mortar in foundation and plinth including supply of all material, labour, T&P etc. required for proper completion of work.S.I NO. 307A CH-6/22) |
| 111 | M-150 brick work in 1:4(one part of cement and four part of coarse sand of 2.2.M ) Brick work in super-structure above plinth level up to floor two level (up to two storeys) includingnecessary cutting and moulding of bricks as requiredand also including honey comb brick work thickness of wall one brick thick. (1:4 cement & coarse sand) ( S.I NO. 307A+309+310/22) |
| 112 | R.C.C. work with cement approved coarse sand & 2cms(3/4\") gauge approved crushed stone grit in proportion of 1:1.5:3 in footing & raft excluding supply of reinforcement and its bending but including its fixing & binding the same with 24BWGGI Binding wire & including necessary centering & shuttering etc. required for proper completion of work. Binding wire is to be supplied by the contractor free of cost. ( S.I NO. 287 SI. 283A-283/22 |
| 113 | R.C.C. work with cement approved coarse sand & 2cms(3/4\") gauge stone grit in proportion of 1:1.5:3 in Wall and coloumns excluding supply of reinforcement and its bending but including its fixing & binding the same with 24BWGGI Binding wire & including necessary centering & shuttering etc. & and also including supply of all material labour T&P etc. required for proper completion of work. Binding wire is to be supplied by the contractor free of cost. ( S.I NO. 289 CH-5/22) |
| 114 | Reinforced cement concrete work in lighter beam including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). R.C.C. work in Beam S.I.No. 285/2022 |
| 115 | R.C.C. work with cement approved coarse sand & 2cms(3/4\") gauge stone grit in proportion of 1:1.5:3 in slab excluding supply of reinforcement and its bending but including its fixing & binding the same with 24BWGGI Binding wire & including necessary centering & shuttering etc. & and also including supply of all material labour T&P etc. required for proper completion of work. S.I. 284A/2022 |
| 116 | M.S ( Tor steel or plain ) in plain work such as R.C.C. or R.B. work including bending for proper shape and including supply of steel and its wastage, bend hooks and authorised overlapping shall be measured. ( S.I NO. 504 CH-10)/2022 |
| 117 | Mild steel or iron work in heavy sizes such as trusses built up gates, door frames, record racks, roof work gates etc. wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. S.I. No. 503/2022 |
| 118 | 12mm thick plaster in 1:4 cement and coarse sand mortar over brick work minimum thickness not to be less than 10mm including supply all materials labour t&P etc required for proper completion of work ( S.I NO. 584 CH-13)/2022 |
| 119 | Finishing walls with Acrylic Smooth exterior paint of required shade :13.46.1New work (Two or more coat applied @ 1.67 ltr/10 sqm overand including priming coat of exterior primer applied @ 2.20kg/ 10 sqm) DSR/13.46.1/2021 |
| 120 | Painting two coat over priming coat (but including cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as LUXOL3,Hi-gloss apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work. S.I. No. 1A+2+4(iii)/2022 |
| 121 | Excavation for depth upto for laying sewer line,manhole,gully traps etc. in ordinary soil (sand,loam clay) including cutting of joints pits,trimming, dressing levelling and refilling of trenches in 20 cms layers ,watering and ramming the same including removal of surplus earth or other dismental material upto a distance of 50 M from the centre of trench. up to 1.50 m depth |
| 122 | 1.50 m to 3.00 m depth |
| 123 | 3.00 mto 4.50 m depth |
| 124 | Providing and laying Nonpressure NP 2 class 150mm diaRCC pipe with collars jointed withstiffmixtureofcement mortar in the proportion of 1:2 (1cement : coarse sand ) includingtestingof joints etc. complete. (1.50-3.00m) DSR 2021/19.6.2 |
| 125 | Providing and laying NonpressureNP 3 class 250mm diaRCC pipe with collars jointed withstiffmixtureofcement mortar in the proportion of 1:2 (1cement : coarse sand ) includingtestingof joints etc. complete.(0-1.50m) BGL (Analysis attached)(PS) |
| 126 | Construction of RCC circular manhole 900mm internal dia at bottom and 0.56 dia at top in 1:1.5:3 (1 cement 1.5 coarse sand 3 stone aggregate 20mm nominal size) inside cement plaster 6mm thick 1:3 (1cement 3 fine sand) with foundaton concrete 1:2:4 (1cement 2 coarse sand 4 stone aggregate 20mm nominal size) over 1:5:10 base concrete (1cement 5coarse sand 10 stone aggregate 40mm nominal size) and making necessary shannel in cement concrete 1:2:4 (1cement 2 coarse snad 4 stone aggregate 20mm nominal size) finished with float coat of neat cement all complete as per standard design. |
| 127 | Add or deduct for Supply of all materials, labour and T & P etc. for Regulation of Manholes Shafts for 900mm dia & 1.50M Depth P.S. (As per C.B.No. 2430/2016 Photo copy attached) |
| 128 | Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality.H.D. -20- Circular shape 560mm internal diameter. 19.19.3.1/DSR 2021 |
| 129 | Providing M.S. foot rests including fixing in manoholes with 20x20x10 cm cement concrete blocks 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) With 20x20mm square bar as per standard design: 19.15.2/DSR 2021 |
| 130 | Earth work in embankmentin ordinary soil including, cutting and Cartage of Earth upto 8 km distance etc complete in all respect as per S.I. No. 231(a) excluding royality. Analysis rate.(AR) |
| 131 | P/L of Granular sub base (G.S.B.) including all labour, Materials, taxes, cartage and T&P etc. complete of work as per direction of E/I.P.S.(Analysis attached) (AR) |
| 132 | Supply & Laying of 80 mm thick precast cement concretepaver block with a top layer of minimum 8mm thickness having plan dimension 200 x(160+120) of O.P. cement, smooth high gloss finish, skid reditant. Manufactured from rubber moulds threw vivro - compression machanism.The compressive strength of concrete paver blocks shall not be less than 30 MPa & 5 kg/no. confirming to IS:15658-2006 with a 4cm thick layer of fine sand including cost of all materials, labour T&P etc. required for proper completion of the work as per direction of E/I.(Red colour hingh quaility pigment/lanxess, bayer chemicals) S.O.R/New Item-5 on page 51/2022(A) Gray Colour |
| 133 | Constructing masonryChamber 60x60x75cm. inside in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for fire hydrants with C.I surface box 350x350mm ttop and 165 mm deep (inside) with Chained lid and RCC top slab with 1:2:4 mix (1 cement : 2 coarse sand: 4graded stone aggregate 20mm nominal size),i/c necessary excavtion foundation concrete 1:5:10 mix(1 cement : 5 coarse sand: 10graded stone aggregate 40mm nominal size) and in inside pelastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick finished with a floating coat of neat cementcomplete as perstandard design. with common burnt clay F.P.S(nonmodular) bricks of class designation 7.5DSR 2021/18.36.1 |
| 134 | Construction of brick masonary house connection chamber of size 900x900x1000 mm.(Internal). with M150 brick work in 1 : 4 (1 cement and 4 coarse sand) for sluice valve, with C.I. surface box 100mm top dia, 160mm bottom dia & a180mm deep (inside) with chainded lid and RCC top slab 1:2:4 mix i/c necessary excavation, foundation concrete 1:5:10 (1cement 5 fine sand 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1cement 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design. DSR 2021/18.34.1 |
| 135 | Supply and laying 110mm internal dia P.V.C. pipe of 10kg/sqcm pressure andFinolex or Jindal make complete and including supply of all materials, labour and T&P etc. required for proper completion of the work. PSR as per C.B.No. 2409/2016 |
| 136 | S/F of 150mm dia PVC ISI make pipe joints including cost of pipe coupling sockets sales taxes excise duty insurance and transportation upto desinated place P.V.C. pipe with shocket and tested for 6.00 kg/cmsq I.S.I marked. (approved rate.) |
| 137 | Supply and laying 40mm internal dia C.P.V.C. pipe of Astrol or Ashirwad make complete and including supply of all materials, labour and T&P etc. required for proper completion of the work. DSR 18.7.5/2021 |
| 138 | P/F 100mm dia C.I. sluice vales with cap complete with volts nuts rubber insertion ect. (the tail pieces if required will be paid seprately) 18.31.1.1/21 |
| 139 | Supply & fixing Fire Hydrant 100mm dia (C.B. No. 2409/2016) |
| 140 | Making water connecton of G.I. mains (25 to 40mm) dia by providing and fixing brass ferruel 25mm dia G.I. Uninon and G.I. nipple including cutting and threading the pipe inspection festing cutting and making good the road the road excluding bond with nagar palika fixing or pipe line upto the point near the building complete work including supply of all matereials labour t&p etc. required for proper completion of the work DSR 18.13.1/2021 |
| 141 | Brick bats of O.B.B. UP PWD SOR-2022/ |
| 142 | Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-incharge, upto 90 metre depth below ground level.Drilling of 300mm dia bore hole manually. 23.1.1.1.1/DSR 2021 |
| 143 | Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.150 mm nominal size dia. 23.4.2/DSR 2021 |
| 144 | Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.23.5/DSR 2021 |
| 145 | Supplying, filling, spreading & leveling gravels of size range 5 mm to 10mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.23.6/DSR 2021 |
| 146 | Supplying, filling, spreading & leveling coarase sand of size range 1.5 mm to 2mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer-in-charge.23.7/DSR 2021 |
| 147 | Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/medium/coarse, in required grading & size as per actual requirement, all complete as per direction of Engineer-in-charge.23.8/DSR 2021 |
