|
| 1 | (CIVIL WORKS) Earthwork in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches of walls or drains (not exceeding 1.5m in width or 10sqm on plan)…........All kinds of soil |
| 2 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:4 (1cement:4 coarse sand) |
| 3 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work up to plinth level 1:3:6 (1cement:3coarse sand (zone-III):6 graded stone aggregate 40mm nominal size) |
| 5 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement- All work up to plinth level:1:1.5:3 (1cement:1.5coarse sand (zone-III):3 graded stone aggregate 20mm nominal size) |
| 6 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement:1:1.5:3 (1 cement:1.5 coarse sand (zone-III): 3 graded stone aggregate 20mm nominal size) |
| 7 | Reinforced cementconcrete work in beams, suspended floors, roofs having slope up to 15 deg landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiralstair case cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1cement:1.5 coarse sand (zone-III):3 graded stone aggregate 20mm nominal size) |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form forFoundations, footings, bases of columns, etc for mass concrete |
| 9 | Suspended floors, roofs, landings, balconies and access platform |
| 10 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 11 | Columns, Pillars, Piers, Abutments, Posts and Struts |
| 12 | Stairs (excluding landings) except spiral- staircases |
| 13 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 14 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 15 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in super structure above plinth level up to floor V level Cement mortar 1:4 (1cement:4 coarse sand) |
| 16 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete |
| 17 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50mm(+0.05%) total coated thickness with zinc coating 120 grams per sqm…........Ridges plain (500-600mm) |
| 18 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50mm(+0.05%) total coated thickness with zinc coating 120 grams per sqm…........ |
| 19 | Barge Board (upto 300mm) |
| 20 | 15mm cement plaster on rough side of single or half brick wall mix:1:4 (1cement:4coarse sand) |
| 21 | Cement plaster skirting up to 30cm height, with cement mortar 1:3 (1 cement:3 coarse sand), finished with a floating coat of neat cement 18mm thick |
| 22 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacture) with water absorption less than 0.08% and conforming to IS: 15622, of approved make…........Size of Tile 600X600 mm |
| 23 | Providing and laying machine cut, mirror polished, Italian Marble stone flooring laid in required pattern in linear portion of the building all complete as per architectural drawing, with 18mm thick stone slab laid over 20mm….........18mm thick Italian Marble stone slab, Perlato, Rosso verona, Fire Red or Dark Emperadore etc. |
| 24 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacture), of approved make, in all colors, shades except burgundy, bottle green, black of any size…......... |
| 25 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS: 277…............12.5mm thick tapered edge gypsum moisture resistant board |
| 26 | Providing and fixing M.S. grill of required pattern in frames of windows etc with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete Fixed to steel windows by welding |
| 27 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropiate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners…...........For shutters of doors and windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately)Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, minimum anodic coating of Grade AC 15 |
| 28 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade I Type II, in panelling fixed in aluminium doors, windows shutters and partition frames…......Pre-laminated particle board with decorative lamination on both sides |
| 29 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/neoprene gasket etc. complete as per the architectural drawings and the directions….....With float glass panes of 8mm thickness (weight not less than 20kg/sqm) |
| 30 | Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc completePowder coated minimum thickness 50 micron aluminium |
| 31 | Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. complete as per direction of Engineer in charge Polyster powder coated minimum thickness 50 micron aluminium |
| 32 | Providing and applying plaster of paris putty 2mm thickness over plastered surface to prepare the surface even and smooth complete |
| 33 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give even shade:Two or more coats on new work |
| 34 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives New work (Two or more coats applied @1.43 litre/10sqm. Over and including priming coat of exterior primer applied @0.90 litre/10sqm |
| 35 | Providing and laying damp proof course 40mm thick with cement concrete 1:2:4 (1cement:2coarse sand (zone-III):4 graded stone aggregates 12.5mm nominal size |
| 36 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1cement:3coarse sand:6graded stone aggregate 20mm nominal size)over 75mm thick bed of dry brick ballast 40mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth |
| 37 | Construction of granular sub-base by providing close graded material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads….....With material conforming to Grade-II (size range 53mm to 0.075mm) having CBR Value-25 |
| 38 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in foothpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in…...........80mm thick C.C. paver block of M-30 grade with approved color design and pattern |
| 39 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30cm measured to a height of 1m above ground level and removal of rubbish up to a distance of 50m outside the priphery of the area cleared |
| 40 | SANITARY AND WATER SUPPLY WORKS Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device….........W.C. pan with ISI marked white solid plastic seat and lid |
| 41 | Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern with fittings, standard size G.I./ PVC flush pipe…........Single squatting plate with 5 litre P.V.C. automatic flushing cistern |
| 42 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630X450 mm with a pair of 15mm C.P. brass pillar taps |
| 43 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board 510X1040 mm bowl depth 250mm |
| 44 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing Rectangular shape 453X357mm |
| 45 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot and cold water supply, including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer in Charge (i)15mm nominal outer dia pipes |
| 46 | (ii)25mm nominal outer dia pipes |
| 47 | (iii)50mm nominal outer dia pipes |
| 48 | (iv)75mm nominal outer dia pipes |
| 49 | (v)100mm nominal outer dia pipes |
| 50 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot and cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge Concealed work, including cutting chases and making good the walls etc.(i)15mm nominal outer dia pipes |
| 51 | (ii)25mm nominal outer dia pipes |
| 52 | (iii)32mm nominal outer dia pipes |
| 53 | Making soak pit 2.5m diameter 3.0 metre deep with 45X45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100mm diameter, 1.8m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 54 | Constructing brick masonry manhole in cement mortar 1:4 (1cement:4 coarse sand) with R.C.C top slab with 1:1.5:3 mix (1cement:1.5 coarse sand (zone-III):3 graded stone aggregate 20mm nominal size, foundation concrete 1:4:8 (1cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size)..............Inside size 90X80 cm and 45 cm deep including C.I. cover with frame (light duty) 455X610 mm internal dimension…....With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 55 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms 15mm nominal bore |
| 56 | Providing and fixing C.P. brass stop cock (concealed) of standard design and approved make conforming to IS:893115mm nominal bore |
| 57 | Providing and placing on terrace at all floor levels) polyethylene water storage tank, IS:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support of the tank |
| 58 | ELECTRICAL WORKS WIRING IN PVC CONDUIT Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. (i)Group A |
| 59 | (ii)Group B |
| 60 | (iii)Group C |
| 61 | Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. |
| 62 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 63 | Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 2 Nos 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 64 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required (i)2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 65 | (ii)2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 66 | (iii)2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 67 | (iv)2 X 10 sq. mm + 1 X 6 sq. mm earth wire |
| 68 | (v)4 X 6 sq. mm + 2 X 6 sq. mm earth wire |
| 69 | (vi)4 X 10 sq. mm + 2 X 6 sq. mm earth wire |
| 70 | (vii)4 X 16 sq. mm + 2 X 6 sq. mm earth wire |
| 71 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.(i) 5/6 amps switch |
| 72 | (ii)2 way 5/6 amps switch |
| 73 | (iii)15/16 amp switch |
| 74 | (iv)3 pin 5/6 amp socket outlet |
| 75 | (v)6 pin 15/16 amp socket outlet |
| 76 | Telephone socket outlet |
| 77 | TV antenna socket outlet |
| 78 | Bell push |
| 79 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 80 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 81 | Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required.(i) 1 or 2 Module (75mmX75mm) |
| 82 | (ii)4 Module (125mmX75mm) |
| 83 | (iii)6 Module (200mmX75mm) |
| 84 | (iv)8 Module (125mmX125mm) |
| 85 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. |
| 86 | Erection of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS lamps per fitting, complete with all accessories including connection etc. as required. |
| 87 | Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 88 | Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. |
| 89 | Numbering of ceiling fan/ exhaust fan/ fluorescent fittings as required. |
| 90 | Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.(i) Upto 450 mm sweep |
| 91 | (ii)510 mm sweep |
| 92 | Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes. |
| 93 | MCCB, MCB & DB\"S Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)(i) 4 way (4 + 12), Double door |
| 94 | (ii)6 way (4 + 18), Double door |
| 95 | (iii)8 way (4 + 24), Double door |
| 96 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole |
| 97 | Single pole and neutral |
| 98 | Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. |
| 99 | Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.(i)25 amps |
| 100 | (ii)40 amps |
| 101 | (iii)63 amps |
| 102 | Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps \"C\" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. |
| 103 | E A R T H I N G Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 104 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) |
| 105 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. |
| 106 | POLE ERECTION Erection of steel tubular or rail pole strut in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling and secured with holding clamps, bolts, nuts, etc. as required. |
| 107 | MV CABLE LAYING Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Upto 35 sq. mm |
| 108 | Supplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) of size 60 cm X 60 cm at the bottom and 50 cm X 50 cm at the top with a thickness of 10cm including inscription duly engraved as required. |
| 109 | NON-SCHEDULE ITEMS: Supplying of light fittings complete with all standard accessories as required. LED Bulb: KOLORS brand 9watt model no: 2204BU09 (CW) |
| 110 | LED Bulb: KOLORS brand 0.5 watt model no: 2204BU00 (YW)NANO LED NIGHT LAMP |
| 111 | LED batten: KOLORS brand 20 watt model no: 2402BA20 (WW) KARIS LED BATTEN LIGHT |
| 112 | 9 watt KARIS SURFACE LED PANEL LIGHT ROUND, Model no: 2403PL09S (WW) |
| 113 | 12 watt KARIS SURFACE LED PANEL LIGHT ROUND, Model no: 2403PL12R (WW) |
| 114 | Supplying installation, testing commissioning of telephone tag block or similar specification of other approved makes. of the following sizes 10 Pair |
| 115 | Supplying installation, testing & commissioning of RJ 45 Single Module Socket or similar specification of other approved makes. of the following sizes |
| 116 | READY MADE PANEL Supplying including installation, testing and commissioning of Readymade Panel board conforms to IS : 8623, IEC : 60439 made of Phosphatised powder painted wall mounting type complete with Ana log meter module cable Alley both LHS and RHS, Copper Bus bar, Din Rail, Neutral Bar, Earth Baretc. with Provision for 1 No. 4 pole MCCB as incomer and provision for 12 Nos. FP MCCB out goings as specified and directed by the deptt. and comprising of the following electrical items:1. Panel Boardup to 250 A Incomer, O/G FP MCCBs 2. Meter Module- Digital (Provision for Ammeter, Voltmeter, Selector Switch, Control Fuses, Indicating lights, MCBs etc. 3. cable Alley 12 Way for incoming 250A(Incoming and Outgoing MCCB of reqd. rating will be measured and paid separately) |
| 117 | GEYSER Supplying and fitting fixing of electric storage water heater [Geyser] of AOS-Jaquarmake) including necessary connectionetc. as required complete and as directed by the Department. (i) 6 Litre Capacity |
| 118 | (ii)10 Litre Capacity |
| 119 | Motor Pump Set5 HP single Phase Centrifugal monoblock pump set (Crompton Greaves/ Aquatic/ CRI/ V-Guardmake)2900 rpm with DOL Starter ( Crompton Greaves/ Control & Switch Gear/ BCH/ L& T / Siemensmake) . |
| 120 | Supplying fitting and fixing including necessary connection as approved by the Deptt.)of Starter ( Crompton Greaves/ Control & Switch Gear/ BCH/ L& T / Siemensmake) of following type and capacity as specified and directed by the Department. ( Crompton Greaves/ Control & Switch Gear/ BCH/ L& T / Siemensmake) D.O.L Starter ( Crompton Greaves/ Control & Switch Gear/ BCH/ L& T / Siemensmake)0.5 TO 10 HP, 0.72 TO 20 A. |
| 121 | Supplying of approved make Ceiling fan of double ball bearing of the following sizes with resistance type regulator and its all accessories suitable for operation on 230 V Single phase, 50 Hz AC supply complete as required….. 1200 mm sweep(USHA/GEC/CROMPTON/BAJAJ/HAVELLS) |
