Military Engineer Services-MES has published Repair To Flooring, Joineries, Plastering, Plinth Protection, Brick Work, Roofing In Eme Bn And Afvh Under Ge ( North ) Udhampur. Submission Date for this Tender is 10-08-2022. Shed Construction Tenders in udhampur Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 09-Jul-2022 | Corrigendum 1 | Date | 20-07-2022 |
| 2 | 14-Jul-2022 | Corrigendum 2 | Date | 26-07-2022 |
| 3 | 20-Jul-2022 | Corrigendum 3 | Date | 30-07-2022 |
| 4 | 25-Jul-2022 | Corrigendum 4 | Date | 01-08-2022 |
| 5 | 27-Jul-2022 | Corrigendum | Date | 03-08-2022 |
| 6 | 28-Jul-2022 | BOQ | BOQ | 03-08-2022 |
| 7 | 03-Aug-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 10-08-2022 |
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engr-in-Charge. |
| 2 | Non skid, coloured ceramic jointfree/rectified tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc,set and jointed in neat cement slurry and pointed incoloured cement to match over and including 10 mm thick screed bed or bedding layer in cement mortar 1:4, complete all as specified and as directed by Engr-in-Charge. |
| 3 | Vitrified tiles (light shade) of 10mm thick coloured (area of each tile not exceeding 0.36 sqm) as in floors jointed in cement slurry and pointed in white or coloured cement to match the existing surfaces over and including 15 mm thick screed bedding/ backing layer in CM 1:4, complete all as specified and as directed by Engr-in-Charge. |
| 4 | Vitrified tiles (double charged) of 10mm thick any colour (area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm) as in floors jointed in cement slurry and pointed in white or coloured cement to match the existing surfaces over and including 15 mm thick screed bedding/ backing layer in CM 1:4, complete all as specified and as directed by Engr-in-Charge. |
| 5 | Glazed coloured ceramic jointfree/rectified tiles of size 300x250mm /450x300mmand 6 to 7mm thickin vertical surfaces like dado/skirting, etc., set and jointed in neat cement slurry and pointed in coloured cement to match, over and including 10 mm thick rendering on fair faces of brick/concrete surfaces works in cement mortar 1:4 finished rough for receiving tiles, complete all as specified and as directed by Engr-in-Charge. |
| 6 | 25 mm thick, Plain cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in sub base for laying floor finishes including finishing the surfaces even and rough without using extra cement, complete all as specified and as directed by Engr-in-Charge. |
| 7 | Machine cut kota stone slab flooring 18-20 mm thick over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including Screed bed or bedding layer of mortar 20mm thick in cement mortar 1:3, complete all as specified. |
| 8 | Description all as per srl item No 07 above but in vertical surfaces like dado/skirting, etc., set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick rendering (backing) on fair faces of brick/concrete surfaces works in cement mortar 1:3, complete all as specified and as directed by Engr-in-Charge. |
| 9 | Granite(of any type) stone slab tiles, 18-20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing with rounding to edges of stone slabs one edg complete Including20mm thickbacking coat CM 1:4 complete all as specified and as directed by Engr-in-Charge. |
| 10 | Rounding of/moulding to edge (half round) of stone of any description, such as in steps, cooking platform and other similar situations including rubbing and polishing (Granite finish), complete all as specified and as directed by Engr-in-Charge. |
| 11 | Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, removing all type of vegetation (like peeple tree etc) scrubbing down with water complete, all as specified and as directed by Engr-in-Charge. |
| 12 | 15mm thick rendering on fair faces of brick or concrete surfaces in cement mortar 1:6, finish surfaces even and smooth without using extra cement, complete all as specified and as directed by Engr-in-Charge. |
| 13 | 10mm thick rendering on fair faces of brick or concrete surfaces in cement mortar 1:6, finish surfaces even and smooth without using extra cement, complete all as specified and as directed by Engr-in-Charge. |
| 14 | 5mm thick rendering on brick or concrete surfaces as in ceiling in cement mortar 1:3, and finish the surface even and smooth without using extra cement, complete all as specified and as directed by Engr-in-Charge. |
| 15 | Providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternatebays (n exc 2 Sqm each )and finished even and smooth without using extra cement and providing jointsthrough out the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weightcomplete all as specified and as directed by Engr-in-Charge. |
| 16 | Taking down chowkats or frameswith shutters(without taking offshutters from frames) area not exceeding 1.50 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed by Engineer-in Charge. |
| 17 | Description all as per item No 16 above but area exceeding 1.50 square metre and not exceeding 4 square metre each. |
| 18 | Pressed steel frames for doors, made out of 1.25 mm thick MS sheet, with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc.complete,of frame size 125 mm x 60 mm, including one shop coat of red oxide zinc chrome primer, complete all as specified and as directed by Engr-in-Charge. |
| 19 | Description all as per item No 18 above but frame size 105 x 60 mm. |
| 20 | 35 mm thick, factory made, 2nd class hard wood,plain framed, paneled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces, the size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, complete all as specified and directed by Engr in Charge. |
| 21 | Description all as per item No 20 above but glazed and skeleton shutter with sash bar for glass/wire gauge. |
| 22 | Providing cement concrete 1:3:6 type C-0 using 12.5mm graded crushed stone aggregates for, filling asin the pressed steel door frame/hold fast complete all as specified and directed by Engr in Charge. |
| 23 | 150 mm aluminium anodised, barrel tower bolts of extruded section(ISI Mark) complete all as specified and directed by Engr in Charge. |
| 24 | 300 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy(ISI Mark) complete all as specified and directed by Engr in Charge. |
| 25 | 150 mm aluminium handles, cast type anodised(ISI Mark) complete all as specified and directed by Engr in Charge. |
| 26 | Preparation of new wooden or wood based surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer, complete all as specified and as directed by Engr-in-Charge. |
| 27 | Preparation of new steel and iron surfaces exceeding 10cm width or girth and applying two coats of synthetic enamel paint over preprimed surfaces, complete all as specified and as directed by Engr-in-Charge. |
| 28 | Vitreous China wash down water closet pan and seat cover (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including P or S trap and including plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device, including connection to drain pipe (or out going pipe) and to flushing pipe, antisyphonage pipe, etc. including cast iron "P" or "S" trap for 100mm bore of pipe, fixed in repairs complete all as specified and as directed by Engr-in-Charge. |
| 29 | Vitreous china water closet, "Orissa pattern, including lime concrete bedding, size 580 x 440 mm white with integral foot rests excluding flushing cistern and flush pipe but including connection to trap, anti syphonage pipe etc. complete fixed in repairs, complete all as specified and as directed by Engr-in-Charge. |
| 30 | 10 ltr capacity PVC valveless, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets with twin flush provision,fixed in repair, complete all as specified and as directed by Engr-in-Charge. |
| 31 | Demolition of brick work or stone masonry built in cement mortar including all quoins arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles, complete all asspecified and directed by Engr-in-Charge |
| 32 | Brick work with old size sub class "B" bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6, but except brick complete all as specified and as directed by Engr-in-Charge. |
| 33 | Brick work with old size sub class "B" bricks, straight or curved on plan exc 6 m mean radiusin half brick thick built in cement mortar 1:4, complete all as specified and as directed by Engr-in-Charge. |
| 34 | S&F Viterous china wash basin, white flat back size 550 x 400mm including waste coupling CP 32mm dia chain and plug and porcelan stopper and CI brackets of iron 65 x 65 x 6mm embedded in PCC block with PCC 1:2:4 type B-1 and PVC waste pipe 32mm dia & CP getting with holes, fixed in repair, complete all as specified and as directed by Engr-in-Charge. |
| 35 | Pillar taps, cast copper alloy, with capstan heads, chromium plated,screwed down, high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly nuts, screwed for iron pipe of bore 15 mm, fixing in repair, complete all as specified and as direceted by Engr-in-Charge. |
| 36 | PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as direceted by Engr-in-Charge. |
| 37 | Aluminiumtubular towel rail, 20mm dia, D type, 60cm long between flanges aluminium anodized, fixed with rawl plugs, fixed in repair,complete all as specified and as direceted by Engr-in-Charge. |
| 38 | 600mmx450mm beveled edge mirror 5.5mm thick of selected quality glass, mounted on 6mm thickcommercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, fixing in repair, complete all as specified and as direceted by Engr-in-Charge. |
| 39 | Applying two coats of oil bound distemper over and including a coat of primer and 1 mm thick a layer of wall care putty (JK Birla)including preparation ofold plastered/ unplastered surfaces of wall, including complete removal of existing treatment complete all as specified & directed by Engr-in-Charge. |
| 40 | Applying two coats of oil bound distemper over and including a coat of primer and 1 mm thick a layer of wall care putty including preparation ofnew plastered/ unplastered surfaces of wall, complete all as specified & directed by Engr-in-Charge. |
| 41 | Preparation new surfaces plastered or unplastered and applyingthree coats of white wash on ceiling complete all as specified and as directed by Engr-in-Charge. |
| 42 | Preparing newly plastered or unplastered surfaces of wall and applying two coats of cement base paint, complete all as specified and as directed by Engr-in-Charge. |
| 43 | Taking up or down steel tubing of 15 mm bore with connections for cleaning for refixing or removing to store yard/from site, complete all as specified and as directed by Engr-in-Charge. |
| 44 | Taking up or down steel tubing of 20 mm bore with connections for cleaning for refixing or removing to store yard/from site, complete all as specified and as directed by Engr-in-Charge. |
| 45 | Taking up or down steel tubing of 25 mm bore with connections for cleaning for refixing or removing to store yard/from site, complete all as specified and as directed by Engr-in-Charge. |
| 46 | 15 mm bore steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified and as directed by Engr-in-Charge. |
| 47 | 20 mm bore steel water tubing medium grade galvanised with and including all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified and as directed by Engr-in-Charge. |
| 48 | 25 mm bore steel water tubing medium grade galvanised with and including all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified and as directed by Engr-in-Charge. |
| 49 | Stop valves, cast copper alloy,screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of bore 15mm fixing in repair , complete all as specified and as directed by Engr-in-Charge. |
| 50 | Bib taps , cast copper alloy, chromium plated, fancy type, screwed down for iron pipe or for brass ferrulefor bore of pipe 15 mm fixing in repair, complete all as specified and as directed by Engr-in-Charge. |
| 51 | PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and as directed by Engr-in-Charge. |
| 52 | Rotational moulded polyethylene water storage tank , two layers, ISI marked (cylinderical vertical with closed top) hoisted with Threaded Cap and fixed in position all as specified in SSR Part-I of Capacity 500 litres each including all accessories (i.e GI nipples and Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of bore 20mm/25mm (Minimum weight210 gram) etc),including dismantling existing water tanks, complete all as specified and as directed by Engr-in-Charge. |
| 53 | Rotational moulded polyethylene water storage tank , two layers, ISI marked (cylinderical vertical with closed top) hoisted with Threaded Cap and fixed in position all as specified in SSR Part-I of Capacity 1000 litres each including all accessories (i.e GI nipples and Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of bore 20mm (Minimum weight210 gram) etc),incl dismantling existing water tanks, complete all as specified and as directed by Engr-in-Charge. |
| 54 | Demolition of cement concrete(unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or aboveground level), complete all as specified and as directed by Engr-in-Charge. |
| 55 | Demolition of Cement Concreteof any description and in any position not otherwise specifically provided for complete all as specified and as directed by Engr-in-Charge. |
| 56 | 75mm thick Plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base to floor, complete all as specified and as directed by Engr-in-Charge. |
| 57 | 40 mm thick, Plain cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in sub base tofloor, staircase incl steps etc. finished even and smooth using extra cement complete all as specified and as directed by Engr-in-Charge. |
| 58 | Factory made, Machine pressed / vibro mechanically floated coloured interlocking cement paver block ISI marked, glossy finish, any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 Grade, with topping of cement with imported pigmentincluding 25 mm thick sand cushioning bed including spreading levelling watering if required, Shape shall be approved by Engr-in-Charge. |
| 59 | Chequered cement concrete tiles 20cm x 20cm x 25mm thick, with mixture of white & grey cement in equal proportion & no pigment set, jointed and pointed in neat cement slurry in floors including 15mm thick screed bed in cement mortar 1:4, complete all as specified and as directed by Engr-in-Charge. |
| 60 | Door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed complete all as specified and as directed by Engr-in-Charge. |
| 61 | Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with particle board core, supplying & fixing in frame at site as per specification & drawing as per specification & drawing, complete all as specified and as directed by Engr-in-Charge. |
| 62 | Solid PVC door frame of size 50mm x 47mm wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet, PVC sheet reinforced with M.S. Square tube in opening as per specification & drawing, complete all as specified and as directed by Engr-in-Charge. |
| 63 | Pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated,screwed down, high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly nuts, screwed for iron pipe of bore 15 mm, fixing in repair, complete all as specified and as direceted by Engr-in-Charge. |
| 64 | Viterous china wash basin, white flat back size 580 x 450mmexcluding traps, waste , chain , plug and porcelain stopper inclCI brackets of iron 65 x 65 x 6mm embedded in PCC block with PCC 1:2:4 type B-1 incl PVC waste pipe 32mm dia& CP grating with holeswith pedestal of china ware fixed in repairs complete, all as specified and as directed by Engr-in-Charge. |
| 65 | S&F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms), complete all as specified and as directed by Engr-in-Charge. |
| 66 | Supply and fixing in repair Vitreous China white bowl urinal flat back, size 465x355x265mm (minimum), with brackets, grating and union for discharge pipe, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement & including; fixing only automatic flushing cistern (Exclusive of supply pipe to flushing cistern automatic flushing cistern, trap and waste pipe) , complete all as specified and as directed by Engr-in-Charge. |
| 67 | Demolition of Reinforced Cement Concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for, complete all as specified and as directed by Engr-in-Charge. |
| 68 | Reinforced cement concrete 1:2:4 type B1, (using 20 mm graded crushed stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified and as directed by Engr-in-Charge. Note : Design/Sectional detail of RCCstructure be decided by Engr-in-Charge as per ground requirement. |
| 69 | RCC M-25 (design mix), using 20 mm graded crushed stone aggregate. as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and as directed by Engr-in-Charge. Note : Design/Sectional detail of RCCstructure be decided by Engr-in-Charge as per ground requirement. |
| 70 | Use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) etc to obtain rough flat finished surface of concrete complete all as specified and as directed by Engr-in-Charge. |
| 71 | Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and as directed by Engineer-in-Charge. |
| 72 | TMT mild steel bars, 10mm dia and over, as in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with and includingMS wire (annealed not less than 0.9mm dia) , complete all as specified and as directed by Engr-in-Charge. |
| 73 | TMT mild steel bars, 6-8mm dia and over, as in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and including binding with MS wire (annealed not less than 0.9mm dia), complete all as specified and as directed by Engr-in-Charge. |
| 74 | Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and as directed by Engr-in-Charge. |
| 75 | Steel window (box type) factory made with side hung shutters including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all specified and as directed. Notye : i) The window shall be fabricated as per Drg No CEUZ/TD/1517/15 Sheet 1/3 to 3/3 (ii) MS fillets, glazing, wire gauge shall be measured and paid separately. |
| 76 | Description all as per item No 47.00 here in before but without glazing bar complete all as specified and as directed. Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1517/15 Sheet 1/3 to 3/3 ii) MS fillets, glazing, wire gauge shall be measured and paid for separately |
| 77 | Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck in side with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and as directed by Engr-in-Charge. |
| 78 | Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specifiecation and drawings complete all as specified and as directed by Engr-in-Charge. |
| 79 | 18/19mm thick Prelaminated particle board, termit proof, chemically well pressed, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, as in kitchen cabinet, cub boards, etc including 6mm thick teak wood beading all around complete all as specified and as directed by Engr-in-Charge. |
| 80 | Hasp and staple, 100 mm size safety type aluminium anodised with mild steel hinges pin, including bolt to hinge plate and fixed with screws ,complete all as specified and as directed by Engr-in-Charge. |
| 81 | Continuous (piano) hinges width of flaps (when open) 30 mm, mild steel, bright finish or electrogalvanised, complete all as specified and as directed by Engr-in-Charge. |
| 82 | Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed by Engr-in-Charge. |
| 83 | Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) , complete, all as specified and directed by Engr in Charge. |
| 84 | Powder coated (15 micron) aluminium frames for door/ windows/ ventilators of approved design with one or more rebated including jointing cleats with all fixing arrangementin repair, complete all as specified and directed by Engr-in-Charge. |
| 85 | S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other part made of mild steel heavy duly and fixed repair including taking down aluminium shutter and refixing in replacement of pivat complete all as specified and as directed by Engr-in-Charge. |
| 86 | Dismantling wall and ceiling boards (fibre pulp, insulation etc) or insulation boards / slabs / blankets, any thickness, including cover fillets, complete all as specified and as directed by Engr-in-Charge. |
| 87 | 4mm thick Cement fibre board (designer ceiling) of size 600mm x 600mm panel conforming to IS 14862 type B category three including GI frame work with size of grid 605mm x 605mm including all accessories and GI suspensions, the fibre sheet should be fire resistant, water resistant, termite resistant, environment friendly & 100% asbestos free, complete all as specified and as directed by Engr-in-Charge. Make of false ceiling board & GI Grid : Everest/V board or equivalent as specified in PS |
| 88 | 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screw,complete all as specified and as directed by Engr-in-Charge. |
| 89 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame/wooden frame including punching or drilling out old glazing pins/spring clipscomplete all as specified and as directed by Engr-in-Charge. |
| 90 | 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square or rectangle, area n exc 0.5 sqm in each pane complete all as specified and as directed by Engr-in-Charge. |
| 91 | 4 mm thick figured glass (frosted) ,pin head type and glazing with oil puttynot exc 0.50 Sqm in each panefixing to window/ventilator complete all as specified and as directed by Engr-in-Charge. |
| 92 | 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square or rectangle, areaexc 0.5 sqm in each pane complete all as specified and as directed by Engr-in-Charge. |
| 93 | 4 mm thick figured glass (frosted) ,pin head type and glazing with oil puttyexc 0.50 Sqm in each panefixing to window/ventilator complete all as specified and as directed by Engr-in-Charge. |
| 94 | Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridges, complete all as specified and as directed by Engr-in-Charge. |
| 95 | 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with L-type or J-type or cranked hook bolts complete all as specified and as directed by Engr-in-Charge. |
| 96 | 6mm thick asbestos cement, corrugated or semi-corrugated sheets as in ridges on roofs, walls etc fixed with L-type or J-type or cranked hook bolts complete all as specified and as directed by Engr-in-Charge. |
| 97 | Pre-painted coloured corrugated profiled Galvalume/Zincalume sheet with min 0.50mm TCTwith BTM of 0.45mm thick conforming to IS -513(AZ-150 GSM,Al Zn alloy metallic coating 550MPA yield stress as per AS-1397),as in roof covering/clading to wall fixed with self taping screws, colour/exterior coat of silicon modified polyster/ BHP x RW paint system 20 micron top coat applied over 5 micron primer and a micron polyster back coat applied over 5 micron primer,all fixed with galvanised self drilling self tapping fastener(12-14x55 with EPDM seals), complete all as specified and as directed by Engr-in-Charge. |
| 98 | Pre-painted coloured plain steel profiled Galvalume/Zincalume sheet with Min 0.50 mm TCT with BTM of 0.45mm thick conforming to IS-513(AZ-150 GSM, Al Zn alloy metallic coating 550 MPA yield stress as per AS-1397) as roof ridge colour/exterior coat of silicon modified polyster/BHPxRW paint system 20 micron top coat applied over 5 micron primer and a 5 micron polyster back coat applied over 5 micron primer ,all fixed with Galvanised self drilling self-tapping fastener (12-14x55 with EPDM seals) complete all as specified and as directed by Engr-in-Charge. |
| 99 | Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted , built in cement mortar 1:6 complete all as specified and as directed by Engr-in-Charge. |
| 100 | Providing, pre-cast cement concrete 1:3:6 type C-I (20mm graded) as in bond stones and in similar works bedded and jointed in cement morter 1:6, complete all as specified and as directed by Engr-in-Charge. |
| 101 | Plain cement concrete 1:2:4, type B-1 (using 20 mm graded crushed stone aggregates) as in steps, seismic and other similar bands, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, cills, lintels upto 1.50 metre clear span, copings etc. and in similar works including weathering, slightly rounded or chamfered angles and throating and necessary form works, complete, all as specified and directed by Engr-in-Charge. |
| 102 | 110mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, fixed in repair, complete all as specified and as directed by Engr-in- Charge. |
| 103 | 75mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, fixed in repair, complete all as specified and as directed by Engr-in- Charge. |
| 104 | Dismantling boarding, any description, fixed in any position with nails, complete all as specified and as directed by Engr-in- Charge. |
| 105 | Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawingcomplete all as specified and as directed by Engr-in-Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
