|
| 1 | A.FIRE WATER PUMPING SYSTEMSupply, erection, testing & commissioning of main Pump 25 HP, 3 nos Flange with nipple,reducer,NRV, Switch valve,Foot valve,2 nos pressure switch,Glycering Meter,supply and installation with power cable( Of approved make) |
| 2 | Supply, erection, testing & commissioning of electric motor driven Jockey Pump, horizontal, centrifugal type capableof delivering 180LPM at 60 MWC. The pump shall be coupled to TEFC motor of suitable KW with speed of 2900 RPM with all accessories mounted on common base frame.( Of approved make) |
| 3 | Supply, erection, testing & commissioning of compartmentalised common control panel for above pumps . All components shall be housed in a common cubical made of 16 swg. M.S. sheet with required stiffners(if required). The panel shall be powder quoted of approved colour both inside and out side. The panel shall have both bottom and top cable entry provisions and panel shall be mounted on pedestal of 300mm height. The panel should have sufficient NO / NC contacts for extending the status of fire pumps to the fire alarm panel.( Of approved make) |
| 4 | Supply, laying, testing & commissioning ofPVC outer sheath, steel armoured, aluminium / copper conductor, 1100 Volt Grade power cables with gland etc. The cable shall be laid in tray / hume pipe / in trenches / on walls / floors etc as required. Cables laid outdoors shall include the price of earth escavation providing brick and sand protection, refilling and compacting the earth3C x 70 sq.mm \"Al\" for main pump(Make- Approved make) |
| 5 | Supply, laying, testing & commissioning ofPVC outer sheath, steel armoured, aluminium / copper conductor, 1100 Volt Grade power cables with gland etc. The cable shall be laid in tray / hume pipe / in trenches / on walls / floors etc as required. Cables laid outdoors shall include the price of earth escavation providing brick and sand protection, refilling and compacting the earth3C x 10 sq.mm \"Al\" for Jockey Pump(Make- Approved make) |
| 6 | Supply, laying, testing & commissioning ofPVC outer sheath, steel armoured, aluminium / copper conductor, 1100 Volt Grade power cables with gland etc. The cable shall be laid in tray / hume pipe / in trenches / on walls / floors etc as required. Cables laid outdoors shall include the price of earth escavation providing brick and sand protection, refilling and compacting the earth2C x 1.5 sq.mm for instrumentation(Make- Approved make) |
| 7 | GI earthing strips of 50mm x 6mm thick, strips shall run on floor / ceiling / walls, from pump to control panel with necessary accessories as required.(Make- Approved make) |
| 8 | 16 Sq.mm single core multistrand \"CU\" cable shall be run on floor / ceiling / walls, from the nearest earth bar to the pump control panel with necessary accessories as required.(by saddle/clamp)(Make- Approved make) |
| 9 | Supply and installation of pressure gauge, 1/2 inch bottom entry, of suitable range for pump set with ball valves and other accessories.(Make- Approved make |
| 10 | Supply and installation of Pressure switches, SPDT type, of suitable range for pump sets with ball valves and other accessories.(Make- Approved make |
| 11 | Supply,Erection, fabrication, testing of MS black steel pipe Heavy grade conforming to IS : 1239 Part -1 /3589 including all fittings viz. Elbows, tees, flanges, etc. reducer, clamps, MS support dash fasteners etc. including painting the pipe with two coats of approved red oxide primer and two coats of approved red enamel paint and welded joints complete with cutting and making good the walls, floors or any other surface (For pumping system ).)(Make-TATA,JINDAL)200 mm NB x 6 mm thk |
| 12 | Supply,Erection, fabrication, testing of MS black steel pipe Heavy grade conforming to IS : 1239 Part -1 /3589 including all fittings viz. Elbows, tees, flanges, etc. reducer, clamps, MS support dash fasteners etc. including painting the pipe with two coats of approved red oxide primer and two coats of approved red enamel paint and welded joints complete with cutting and making good the walls, floors or any other surface (For pumping system ).)(Make-TATA,JINDAL)150 mm NB |
| 13 | Supply,Erection, fabrication, testing of MS black steel pipe Heavy grade conforming to IS : 1239 Part -1 /3589 including all fittings viz. Elbows, tees, flanges, etc. reducer, clamps, MS support dash fasteners etc. including painting the pipe with two coats of approved red oxide primer and two coats of approved red enamel paint and welded joints complete with cutting and making good the walls, floors or any other surface (For pumping system ).)(Make-TATA,JINDAL)100 mm NB |
| 14 | Supply,Erection, fabrication, testing of MS black steel pipe Heavy grade conforming to IS : 1239 Part -1 /3589 including all fittings viz. Elbows, tees, flanges, etc. reducer, clamps, MS support dash fasteners etc. including painting the pipe with two coats of approved red oxide primer and two coats of approved red enamel paint and welded joints complete with cutting and making good the walls, floors or any other surface (For pumping system ).)(Make-TATA,JINDAL)80 mm NB |
| 15 | Supply,Erection, fabrication, testing of MS black steel pipe Heavy grade conforming to IS : 1239 Part -1 /3589 including all fittings viz. Elbows, tees, flanges, etc. reducer, clamps, MS support dash fasteners etc. including painting the pipe with two coats of approved red oxide primer and two coats of approved red enamel paint and welded joints complete with cutting and making good the walls, floors or any other surface (For pumping system ).)(Make-TATA,JINDAL)65 mm NB |
| 16 | Supply,Erection, fabrication, testing of MS black steel pipe Heavy grade conforming to IS : 1239 Part -1 /3589 including all fittings viz. Elbows, tees, flanges, etc. reducer, clamps, MS support dash fasteners etc. including painting the pipe with two coats of approved red oxide primer and two coats of approved red enamel paint and welded joints complete with cutting and making good the walls, floors or any other surface (For pumping system ).)(Make-TATA,JINDAL)50 mm NB |
| 17 | Supply,Installation, testing & commissioning of CI Gate Valve as pe IS:14846 (PN 16) with matching flanges complete with nuts & bolts(Make- Approved make)Size150 mm NB |
| 18 | Supply,Installation, testing & commissioning of CI Gate Valve as pe IS:14846 (PN 16) with matching flanges complete with nuts & bolts(Make- Approved make)Size50 mm NB |
| 19 | Supply,Installation, testing & commisssioning of swinging type CI Non return Valve as per API559(PN16 rating) including matching flanges, nuts & bolts complete.(Make- Approved make)Size150 mm NB |
| 20 | Supply,Installation, testing & commisssioning of swinging type CI Non return Valve as per API559(PN16 rating) including matching flanges, nuts & bolts complete.(Make- Approved make)Size50 mm NB |
| 21 | Supply, Installation, testing & commissioning ofCI Globe Valveas per IS:9338(PN16 rating) complete including matching flanges, nuts & bolts complete(Make- Approved make)Size 100 mm NB |
| 22 | Supply, Installation, testing & commissioning ofCI Foot Valveas per IS:(PN10 rating) complete including matching flanges, nuts & bolts complete.(Make- Approved make)Size 150 mm NB |
| 23 | Supply, Installation, testing & commissioning ofCI Foot Valveas per IS:(PN10 rating) complete including matching flanges, nuts & bolts complete..(Make- Approved make)Size 65 mm NB |
| 24 | Supply & installation of GunmetalFire Brigade Draw out connection with necessary foot valve for reservoir(Make- Approved make) |
| 25 | B.FIRE PROTECTION SYSTEM Supply, fabrication, erection & testing of MS black steel pipe Heavy grade conforming to IS : 1239/3589 including all fittings viz. Elbows, tees, flanges, etc. reducer, clamps, MS support dash fasteners etc. including painting the pipe with two coats of approved red oxide primer and two coats of approved red enamel paint and welded joints complete with cutting and making good the walls, floors or any other surface.(Make-TATA,JINDAL150 mm NB |
| 26 | Supply, fabrication, erection & testing of MS black steel pipe Heavy grade conforming to IS : 1239/3589 including all fittings viz. Elbows, tees, flanges, etc. reducer, clamps, MS support dash fasteners etc. including painting the pipe with two coats of approved red oxide primer and two coats of approved red enamel paint and welded joints complete with cutting and making good the walls, floors or any other surface.(Make-TATA,JINDAL80 mm NB |
| 27 | Supply, fabrication, erection & testing of MS black steel pipe Heavy grade conforming to IS : 1239/3589 including all fittings viz. Elbows, tees, flanges, etc. reducer, clamps, MS support dash fasteners etc. including painting the pipe with two coats of approved red oxide primer and two coats of approved red enamel paint and welded joints complete with cutting and making good the walls, floors or any other surface.(Make-TATA,JINDAL25 mm NB |
| 28 | Supply, installation, testing & commissioning of CI Gate Valve as per IS:14846 (PN 16) with matching flanges complete with nuts & bolts. (Make- Approved make)Size 150 mm NB |
| 29 | Providing & fixing Non return valve (Wafer type) with matching flanges complete with nuts & bolts. . (Make- Approved make)Size 150 mm NB |
| 30 | Supply,Installation of SS oblique type single headed Landing valve with 80 mm inlet and 63 mm outlet SS instantaneous male coupling with rubber cap and chain conforming to IS : 5290(Make- Approved make) |
| 31 | Supply,Installation of SS oblique type single headed Hydrant valve with 80 mm inlet and 63 mm outlet SS instantaneous male coupling with rubber cap and chain conforming to IS : 5290..(Make- Approved make) |
| 32 | Supply & installation of SS branch pipe with 20 mm nozzle conforming to IS : 903 complete (Make- Approved make) |
| 33 | Supply & installation of 63 mm dia rubberized reinforced rubber line hose pipe in 15 m length conforming to IS : 636 Type I ISI marked with gunmetal male and female instantaneous coupling conforming to IS 903 wounded with 18 SWG copper wire complete(Make- Approved make) |
| 34 | Supply & installation of MS hose box of fabricated from 16 SWG CRCA sheet double door with lockable arrangements to accommodate 2 RRL hose of 15 m length and one branch pipe painted white inside and red outside with one key. (750x600x250 mm(Make- Approved make) |
| 35 | Supply & installation of swinging type hose reel drum fabricated from 14 SWG CRCA sheets painted with red colour stove paint 2 coats over 1 coat of primer with 30 m long 20 mm dia rubber hose pipe with 10 kg/sq cm working pressure with SS self closing shut – off nozzle of 5 mm outlet fixed on wall with dash fasteners and necessary shut off valve.(Make- Approved make) |
| 36 | Supply & installation of Gunmetal 4 way collecting head with 63 mm dia instantaneous type inlet 150 dia flanged outlet for fire brigade connection to external network (IS : 904) with one no. butterfly valve & NRV of 150NB size.(Make- Approved make) |
| 37 | Supply & installation of automatic 25 NB Air Release Valve.(Make- Approved make) |
| 38 | Supply & installation of Globe Valves in S.S Metal Construction to IS: 778 with screwed endsSize 25NB(Make- Approved make) |
| 39 | Supply and installation of pressure gauge, 1/2 inch bottom entry, of suitable range for pump set with ball valves and other accessories.(Make- Approved make) |
| 40 | C.AUTOMATIC SPRINKLER SYSTEMSupply,Erection, fabrication, testing of MS black steel pipe Heavy grade conforming to IS : 1239 Part -1 /3589 including all fittings viz. Elbows, tees, flanges, etc. reducer, clamps, MS support dash fasteners etc. including painting the pipe with two coats of approved red oxide primer and two coats of approved red enamel paint and welded joints complete with cutting and making good the walls, floors or any other surface (For pumping system ).)(Make-TATA,JINDAL)150 mm NB |
| 41 | Supply,Erection, fabrication, testing of MS black steel pipe Heavy grade conforming to IS : 1239 Part -1 /3589 including all fittings viz. Elbows, tees, flanges, etc. reducer, clamps, MS support dash fasteners etc. including painting the pipe with two coats of approved red oxide primer and two coats of approved red enamel paint and welded joints complete with cutting and making good the walls, floors or any other surface (For pumping system ).)(Make-TATA,JINDAL)80 mm NB |
| 42 | Supply,Erection, fabrication, testing of MS black steel pipe Heavy grade conforming to IS : 1239 Part -1 /3589 including all fittings viz. Elbows, tees, flanges, etc. reducer, clamps, MS support dash fasteners etc. including painting the pipe with two coats of approved red oxide primer and two coats of approved red enamel paint and welded joints complete with cutting and making good the walls, floors or any other surface (For pumping system ).)(Make-TATA,JINDAL)65 mm NB |
| 43 | Supply,Erection, fabrication, testing of MS black steel pipe Heavy grade conforming to IS : 1239 Part -1 /3589 including all fittings viz. Elbows, tees, flanges, etc. reducer, clamps, MS support dash fasteners etc. including painting the pipe with two coats of approved red oxide primer and two coats of approved red enamel paint and welded joints complete with cutting and making good the walls, floors or any other surface (For pumping system ).)(Make-TATA,JINDAL)50 mm NB |
| 44 | Supply,Erection, fabrication, testing of MS black steel pipe Heavy grade conforming to IS : 1239 Part -1 /3589 including all fittings viz. Elbows, tees, flanges, etc. reducer, clamps, MS support dash fasteners etc. including painting the pipe with two coats of approved red oxide primer and two coats of approved red enamel paint and welded joints complete with cutting and making good the walls, floors or any other surface (For pumping system ).)(Make-TATA,JINDAL)40 mm NB |
| 45 | Supply,Erection, fabrication, testing of MS black steel pipe Heavy grade conforming to IS : 1239 Part -1 /3589 including all fittings viz. Elbows, tees, flanges, etc. reducer, clamps, MS support dash fasteners etc. including painting the pipe with two coats of approved red oxide primer and two coats of approved red enamel paint and welded joints complete with cutting and making good the walls, floors or any other surface (For pumping system ).)(Make-TATA,JINDAL)32 mm NB |
| 46 | Supply,Erection, fabrication, testing of MS black steel pipe Heavy grade conforming to IS : 1239 Part -1 /3589 including all fittings viz. Elbows, tees, flanges, etc. reducer, clamps, MS support dash fasteners etc. including painting the pipe with two coats of approved red oxide primer and two coats of approved red enamel paint and welded joints complete with cutting and making good the walls, floors or any other surface (For pumping system ).)(Make-TATA,JINDAL)25 mm NB |
| 47 | Supply & fixing of Sprinkler Head Pendent type(Make- Approved make) |
| 48 | Supply & fixing of Sprinkler Head side wall type(Make- Approved make) |
| 49 | Supply,Erection and testing of Installation Control Valve complete with trims & gong. .(Make- Approved make)Size150 mm NB |
| 50 | Supply, installation, testing & commissioning of CI Gate Valve as pe IS:14846 (PN 16) with matching flanges complete with nuts & bolts. (Make- Approved make)Size150 mm NB |
| 51 | Providing & fixing Non return valve (Wafer type) with matching flanges complete with nuts & bolts.(Make- Approved make)Size 80 mm NB |
| 52 | Providing & fixing Butterfly valve as per BS :5155 (Wafer type) matching flanges complete with nuts & bolts.(Make- Approved make)Size 80 mm NB |
| 53 | Providing & fixing Flow Switch(Make- Approved make) |
| 54 | Supply & installation of automatic 25 NB Air Release Valve(Make- Approved make) |
| 55 | Supply & installation of Globe Valves in S.S Metal Construction to IS: 778 with screwed ends(Make- Approved make)Size 40NB |
| 56 | Supply & installation of Globe Valves in S.S Metal Construction to IS: 778 with screwed ends(Make- Approved make)Size 25NB |
| 57 | Supply and installation of pressure gauge, 1/2 inch bottom entry, of suitable range for pump set with ball valves and other accessories.(Make- Approved make) |
| 58 | D.PORTABLE EXTINGUISHERSSupply & fixing of 6 Kg ABC type dry power extinguisher consisting of welded MS cylindrical body with discharge valve, nozzle and hanging arrangement complete conforming to IS:15683(Make- Approved make) |
| 59 | Supply & fixing of 9 Litre Water type CO2 (ISI marked) extinguisher including all accessories with wall bracket & raw plug conforming to IS:15683(Make- Approved make) |
| 60 | Providing & fixing 4.5kg CO2 type (ISI marked) extinguisher including all accessories with wall bracket & raw plug confirming to IS:940(Make- Approved make) |
| 61 | E.FIRE DETECTION ALARM SYSTEMSupply, erection, testing & commissioning of 1 LOOP FIRE ALARM PANEL complete with all alarms, hooter, fire/fault indicators, audio/visual signals, solid state logic circuit, selector switches, rectifier, battery, battery charger & M.S. Battery box / UPS with necessary supporting frame work auxiliary contacts etc. The panel should have provision to expanding the number of loop up to 2 loop.(Make- Approved make) |
| 62 | Supply, erection, testing & commissioning of analogue addressable Multicreteria Detector(Make- Approved make) |
| 63 | Supply, erection, testing & commissioning of analogue addressable Mannual Call point (Make- Approved make) |
| 64 | Supply, erection, testing & commissioning of Hooter (Make- Approved make) |
| 65 | Supply, erction, testing & commissioning of analogue addressable Control Module (Make- Approved make) |
| 66 | Supply, erection, testing & commissioning of analogue addressable Monitor module(Make- Approved make) |
| 67 | Providing & fixing Fire Alarm ARMOURED CABLING complete with lugs, laying and termination of both ends(Make- Approved make)2C x 1.5 mm2 Armoured ( loop cable)(copper conductor) |
| 68 | Providing & fixing Fire Alarm ARMOURED CABLING complete with lugs, laying and termination of both ends.(Make- Approved make)2C x 1.5 mm2 Armoured ( power cable)(copper conductor) |
| 69 | Supply, erection, testing & commissioning of Repeater Panel (Make- Approved make) |
| 70 | F. SIGNAGESSupply and installation in position the \"FIRE EXIT\" Sign with luminicent colour having size 300 x 100 mm.(Make- Approved make) |
| 71 | Supply and fixing in position the signages \" FIRE ORDER\" contain the following matter on 3 mm thick \"Opaque\" PVC foam board of computerised cut, PVC non-reflective self adhesive vinyle painted foam board of size 1200 x 1000 mm(a)ALERT THE SECURITY AT SECURITY ROOM BY ACTUATING MANUAL CALL POINT LOCATED AT STRATEGIC LOCATION.(b)EVACUATE THE OCCUPANTS BY USING FIRE EXIT AND EMERGENCY EXITS ONLY AND ASSEMBLE AT ASSEMBLY POINTS.(c)BE CALM AND DO NOT GET PANIC, WALK DO NOT RUN(Make- Approved make) |
| 72 | Supply and fixing signage with printed \" IN CASE OF FIRE,DO NOT USE LIFT. USE STAIRS ONLY\" OF 1.5 cm height letters in red with white background. The size of the board shall be 300 x 250 mm and shaall be fixed at the height of 2 mtrs.from finished floor near Manual Call Point.(Make- Approved make) |
| 73 | Add GST @ 18%) for item no-1 to 72 on Rs28,97,475.00 |
