}

Construction Of 1.25 And 0.50 Lac Gallons Sr S, Chain Link Fencing, Anchor Blocks, Rcc Jacketting Wss Dk Marg Sarmarg, kulgam-Jammu And Kashmir

Public Health Engineering Department-PHED has published Construction Of 1.25 And 0.50 Lac Gallons Sr S, Chain Link Fencing, Anchor Blocks, Rcc Jacketting Wss Dk Marg Sarmarg. Submission Date for this Tender is 05-07-2022. Anchors Tenders in kulgam Jammu And Kashmir. Bidders can get complete Tender details and download the document.




Tender Notice

32839010
Construction Of 1.25 And 0.50 Lac Gallons Sr S, Chain Link Fencing, Anchor Blocks, Rcc Jacketting Wss Dk Marg Sarmarg
Open Tender
Indian
Jammu And Kashmir
kulgam
05-07-2022

Tender Details

Construction Of 1.25 And 0.50 Lac Gallons Sr S, Chain Link Fencing, Anchor Blocks, Rcc Jacketting Wss Dk Marg Sarmarg

Key Value

Document Fees
INR 500 /-
EMD
INR 369060.0 /-
Tender Value
INR 1.84 Crore /-

BOQ Items

Name of Work:::Construction of 1.25 and 0.50Lac Gallons SR s, Chain Link fencing, Anchor blocks, RCC Jacketting WSS DK Marg Sarmarg
Sl. No. Item Description
1Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked material :all kinds of soil
2Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.all kinds of soil
3Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides andramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: all kinds of soil 1 metter from cutting edge
4Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
5Providing and laying hand packed stone soling 50 mm nominal size including filling, spreading, dressing,ramming, all leads lifts and all carriages complete.
6Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size)
71:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
8Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
9Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
10Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with:
11Reinforced cement concrete work in arches, arch ribs, domes, vaults shells, folded plate and roofs having slope more than 15° upto floor five level level including curing but excluding the cost of centering, shuttering finishing and reinforcement with: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size
12Centering and shuttering including strutting, propping etc. and removal of form for:Foundations, footings, bases of columns etc. for mass concrete.
13Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
14Suspended floors, roofs, landings, balconies and access platforms.
15Lintel, beams, plinth beams, girders, bressumers and cantilevers.
16Arches, domes, vaults upto 6 m span
17Extra for shuttering in circular work (20% of respective centering and Shuttering items)Foundations, footings, bases of columns etc. for mass concrete.
18Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
19Lintel, beams, plinth beams, girders, bressumers and cantilevers.
20Arches, domes, vaults upto 6 m span
21Edges of slabs and breaks in floors and walls
22Providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification. (1 kg of water proofing material in 50 kg of cement)
23Steel reinforcement for R.C.C. work ready to use "cut and bend" rebars of approved make from factory/workshop to construction site including placing in position and binding allcomplete upto plinth level.TMT bars
24Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand)
25Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level
26RANDOM RUBBLE MASONRY Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: (Quarry Stone)Cement mortar 1:6 (1 Cement : 6 coarse sand)
27RANDOM RUBBLE MASONRY Random Rubble masonry with hard stone in foundation and plinth with bound stone
28Pointing on stone work with cement mortar (1:3 Mix)
29Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):first class kail wood
30Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. first class kail wood
31PROVIDING/ FIXING OF WIRE GAUGE SHUTTERS 35MM THICK FOR DOORS AND WINDOWS (KAIL WOOD)
32Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.welded
33p/l of 50mm thick DPC band over stone work in 1:2:4Mix
34Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.50 mm thick with 20mm nominal size stone aggregate.
35Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including skirting in vertical & pointing the joints with white cement and matching pigment etc., complete In colour such as White, Ivory, Grey, Fume, Red Brown (as dirrected by the engineer incharge)
36Flooring with marble stone of specified thickness as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement:4 coarse sand) laid and jointed with grey cement slurry including skirting in vertical, rubbing, polishing and curing complete with:Makrana White Second quality (16mm)
3712mm Cement plaster finished with a floating coat of neat cement of mix:1 : 3 ( 1 cement : 3 fine sand)
381 : 4 ( 1 cement : 4 fine sand)
391 :6 ( 1 cement : 6 fine sand)
40Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)
41Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.two or more coats on new work
42Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer.
43Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2
44Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete 0.50 mm thick with zinc coating not less than 275 gram/m2
45Providing and fixing plained eaves boarding. (II Class kail Wood)300x40 mm (nominal size)
46Providing and fixing of 0.5mm Color GS Sheet Soffitboardingincluding Backing, supports etc complete job
47Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.1mm thick
48Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge.Made of G.I. wire of dia 4 mm
49Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work.15 mm and 20 mm dia. G.I. pipes
5025 mm and 32 mm dia. G.I. pipes
5140 mm and 50 mm dia. G.I. pipes
5265 mm and 80 mm dia. G.I. pipes
53100 mm dia. G.I. pipes
54Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete 25 to 40 mm nominal bore
55Providing & fixing White vitreous china water closet squatting pan (Indian type)along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge.Long pattern W.C Pan of size 580x440 mm
56Providing and Fixing stainless steel A ISI 304 (18/8) Kitchen Sink as per is: 13983 with ciand stainless steel plug 40mm, including painting of footings and , cutting and making good the walls wherever requiredKitchen sink 610x510 mm bowl depth 200 mm
57Providing & Fixing of Trap 100 dia
58Providing & Fixing 50mm PVC ventpipe
59Tee 100x100
60100 Bend
61Providing and Fixing of Water storage tank including fittings
62Carriage of materials by mechanical transport including loading, unloading, stacking of materials - SAND: 5kms
63Beyond 5 km upto 10 km per km
64Beyond 10 km upto 20 km per km
65Beyond 20 km per additional km (30Kms)
66Carriage of materials by mechanical transport including loading, unloading, stacking of materials - Aggregate 20mm5kms
67Beyond 5 km upto 10 km per km
68Beyond 10 km upto 20 km per km
69Beyond 20 km per additional km (30Kms)
70Carriage of materials by mechanical transport including loading, unloading, stacking of materials - Aggregate 40mm and above : 5kms
71Beyond 5 km upto 10 km per km
72Beyond 10 km upto 20 km per km
73Beyond 20 km per additional km (30Kms)
74Carriage of materials by mechanical transport including loading, unloading, stacking of materials - Stone Soling :5kms
75Beyond 5 km upto 10 km per km
76Beyond 10 km upto 20 km per km
77Beyond 20 km per additional km (30Kms)
78Carriage of materials by mechanical transport including loading, unloading, stacking of materials - Steel/ CGI Sheets:5kms
79Beyond 5 km upto 10 km per km
80Beyond 10 km upto 20 km per km
81Beyond 20 km per additional km (30Kms)
82Carriage of materials by mechanical transport including loading, unloading, stacking of materials - Cement: 5kms
83Beyond 5 km upto 10 km per km
84Beyond 10 km upto 20 km per km
85Beyond 20 km per additional km (30Kms)
86Carriage of materials by mechanical transport including loading, unloading, stacking of materials - Bricks: 5kms
87Beyond 5 km upto 10 km per km
88Beyond 10 km upto 20 km per km
89Beyond 20 km per additional km (30Kms)
90Carriage of materials by manual means including loading, unloading, stacking of materials- (Sand) ist 50m
91Beyond Ist 50m 1000Mtrs
92Carriage of materials by manual means including loading, unloading, stacking of materials- Aggregate Below 40mm ist 50m
93Beyond Ist 50m 1000Mtrs
94Carriage of materials by manual means including loading, unloading, stacking of materials- Aggregate 40mm and Above ist 50m
95Beyond Ist 50m 1000Mtrs
96Carriage of materials by manual means including loading, unloading, stacking of materials- Stone Soling ist 50m
97Beyond Ist 50m 1000Mtrs
98Carriage of materials by manual means including loading, unloading, stacking of materials- Steel/CGI Sheets ist 50m
99Beyond Ist 50m 1000Mtrs
100Carriage of materials by manual means including loading, unloading, stacking of materials- Cement ist 50m
101Beyond Ist 50m 1000Mtrs
102Carriage of materials by manual means including loading, unloading, stacking of materials- Brick ist 50m
103Beyond Ist 50m 1000Mtrs
104Provision for Sanitary, plumbing and electricfication, Heating arrangements
105Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/by mechanical means including stacking of pipes within 50 meters lead as per direction of Engineer-in-charge :15to 40mm nominal bore
106Above 40 mm nominal bore
107Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work
108Cutting bajri paths and making good the same including supply of extra quantities of brick aggregate, moorum and red bajri required.
109Providing and fixing at all height wall panelling with fixing to frame work made of 50mm x 50mm hardwood plugs ncluding cutting brick work and fixing in cement mortar and making good the wall etc. and also providing and fixing wooden moulded cornerbeading of triangular shape to the junction of panelling etc. with ironscrews all complete as per direction of Engineer-in-Charge.
110Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail