Public Works Department-PWD has published Construction Of 8 Nos Type-Iv Quarters At District Hospital At Reckong Peo In District Kinnaur Hp ) ( Sh- Building Portion Thereof, Ws And Si Works, Septic Tank And Rain Water Harvesting System Etc. Submission Date for this Tender is 06-07-2022. Building Work Tenders in kinnaur Himachal Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (within all lead and lift including dressing of sides and ramming of bottoms,including getting out the excavated soil and disposal of surplus excavated soil as directed, within all leads and lifts in all kinds of soil including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Governmentincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 2 | Excavationworkbymechanicalmeans(Hydraulicexcavator)/manual meansinfoundation trenches or drains , including dressing of sides and ramming of bottoms,within all leads and lifts in all kinds of soil including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Governmentincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 3 | Fillingavailableexcavatedearth (excludingrock)intrenches,plinth,sidesof foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.. |
| 4 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.. |
| 5 | Boulder filling under floor.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.. |
| 6 | Providingandlayinginpositioncementconcreteofspecifiedgrade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size)including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.. |
| 7 | Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20mm nominal size).including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.. |
| 8 | Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7(one point seven)kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.. |
| 9 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.. |
| 10 | Providingandlayinginpositionspecifiedgradeofreinforcedcement concrete,excludingthecostofcentering,shuttering,finishingand reinforcement - All work up to plinth level :1:1.5:3 (1 cement:1.5coarsesand):3gradedstoneaggregate 20mm nominal size)including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.. |
| 11 | Reinforcedcementconcreteworkinwalls(any thickness),including attached pilasters,buttresses, plinth and string courses, fillets,columns,pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand:3 graded stone aggregate 20 mm)nominal size)including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.. |
| 12 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels,bands, plain window sills, staircases and spiral stair cases above plinth level up to floor fivelevel,excludingthecostofcentering,shuttering,finishingand reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand :3 graded stone) aggregate 20 mm nominal size).including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.. |
| 13 | Centering and shuttering including strutting, propping etc. and removal of form for all heights :form for all heights :including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.. |
| 14 | Foundations, footings, bases of columns, etc. for mass concrete |
| 15 | Suspended floors, roofs, landings, balconies and access platform |
| 16 | Shelves |
| 17 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 18 | Columns, Pillars, Piers, Abutments, Posts and Struts |
| 19 | Stairs, (excluding landings) except spiral-staircases |
| 20 | Smalllintelsnotexceeding1.5m clearspan,mouldingasincornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like |
| 21 | Edges of slabs and breaks in floors and walls |
| 22 | Walls (any thickness) including attached pilasters, butteresses,plinth and string courses etc. |
| 23 | Steelreinforcement (TATA /SAIL / JINDAL PANTHER/RINL) for R.C.C. work includingstraightening,cutting,bending, placing in position and binding all complete upto plinth level. ThermoMechanically Treated bars of grade Fe-500D or more steel barsincluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including allncidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or othertaxes imposed by the Governmentincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 24 | Steelreinforcementfor (TATA /SAIL / JINDAL PANTHER/RINL)R.C.C.workincludingstraightening,cutting,bending, placing in position and binding all complete above plinth level.ThermoMechanically Treated bars of grade Fe-500D or more steel barsincluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including allncidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or othertaxes imposed by the Governmentincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 25 | Providing and fixing up to floor five level precast cement concrete hollow block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete. 1:1½:3 (1 Cement: 1½ coarse sand): 3 graded stone aggregate 20 mm nominal size) . 10cm thickincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.. |
| 26 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished,machinecutforkitchenplatforms,vanitycounters,windowsills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), jointstreatedwithwhitecement,mixedwithmatchingpigment,epoxy touchups,including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqmincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.. |
| 27 | Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete :20 mm diaincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.. |
| 28 | Providing and Fixing 35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holdingpower, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm,joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends,having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheetinsertedinthedooraspanel,allcompleteas permanufacturer"s specification and including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.. |
| 29 | Providing and fixing 19mm thick commercial board with hard wood edging shutter for cupboardincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.. |
| 30 | Providing and fixing M.S. grills (TATA/SAIL/Apollo/JSW Make ) of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.. |
| 31 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand :6 graded stone aggregate 20mm nominal size).including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.. |
| 32 | Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete.250 mm weighing not less than 150 gmsincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.. |
| 33 | Providing and fixing 50 mm special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.. |
| 34 | Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.. |
| 35 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.. |
| 36 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coatingnot less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.. |
| 37 | 300x16 mm (Three hundredX Sixteen )millimeter |
| 38 | 250x16 mm (Twohundred fiftyXSixteen )millimeter |
| 39 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.. |
| 40 | 250x16 mm (Twohundred fiftyX Sixteen )millimeter |
| 41 | 150x10 mm (Onehundred fifty X Sixteen )millimeter |
| 42 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.. |
| 43 | 125 mm ( Onehundred fifty) millimeter |
| 44 | 100mm ( Onehundred) millimeter |
| 45 | 75mm ( Seventy Five) millimeter |
| 46 | Providingandfixingaluminiumhangingfloordoor stopper,ISI marked,anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.Twin rubber stopperincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.. |
| 47 | Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.Triple strip vertical typeincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.. |
| 48 | Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge..Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides |
| 49 | Structural steel work (TATA/SAIL/Apollo/JSW Make ) riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications .The rates are inclusive of octroi,royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 50 | Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (± 0.2 mm), made out of single piece extruded PVC profile, with mitredcut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, thevertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per manufacturer"s specification and direction of Engineer -in- charge.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.. |
| 51 | Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shapewithhookedendsinR.C.C.slabsorbeamsduringlaying,including painting the exposed portion of loop, all as per standard design complete.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.. |
| 52 | Steel work welded (TATA/SAIL/Apollo/JSW Make )in built up sections/ framed work,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications .The rates are inclusive of octroi,royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 53 | Providing and fixing M.S. tube(TATA/SAIL/Apollo/JSW Make )hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.The rates are inclusive of octroi,royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 54 | Providing and laying precast terrazo tiles 22 mm thick of NTC or its equivalentwith graded marble chips of size upto 12 mm,laid in floors, and landings, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement:4 coarse sand) : Light shade pigment using white cementincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.. |
| 55 | Providing and laying precast terrazo tiles 22 mm thick of NTC or its equivalentwith graded marble chips of sizes upto 12 mm, in skirting and risers of steps not exceeding 30 cm in height, on 12 mm thick cement plaster 1:3 (1 cement : 3 coarse sand), jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles of : Light shade pigment using white cementincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.. |
| 56 | Providing and laying Ceramic glazed floor tiles (SOMANY/KAJARIA/NITCO/Orient Bell or its equivalent) of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with greycement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.. |
| 57 | Providing and laying White glazed tile 6mm thick (30x45 cm )(SOMANY/KAJARIA/NITCO/Orient Bell or its equivalent) in skirting riser of steps and dado 12mm thick cement mortar 1:3 (1cement:3 sand) and jointed with cement slurry complete.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.. |
| 58 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes (Finolex/Astral or its equivalent)conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110mm diameterincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.. |
| 59 | Providingandfixingonwallfaceunplasticised - PVCmouldedfittings/accessories for unplasticised Rigid PVC rain water pipes (Finolex/Astral or its equivalent)conforming to IS :13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.. |
| 60 | Coupler 110 mm (one Hundred Ten millimeter) |
| 61 | Single pushfit Coupler 110mm(one Hundred Ten millimeter) |
| 62 | Bend 110mm (one Hundred Ten millimeter) |
| 63 | Providing and fixing precoated galvanised iron profile sheets (JINDAL/TATA Durashine /JSW or its quivalent) (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.. |
| 64 | Providing and fixing precoated galvanised steel sheet roofing (JINDAL/TATA Durashine /JSW or its quivalent) accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 1518 microns using self drilling/ self tapping screws complete :Ridges plain (500 - 600mm)including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.. |
| 65 | Providing valleys of 90 cm wide overall in plain G.S. sheet (JINDAL/TATA Durashine /JSW or its quivalent) fixed with polymer coatedJ,orLhooks,boltsandnuts8mm diaG.I.limpetand bitumen washers complete :1.60 mm thick with zinc coating not less than 350 gm/m²including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.. |
| 66 | Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete.0.80 mm thick with zinc coating not less than 275 gm/m²including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.. |
| 67 | Providing and fixing MS BP sheet2mm thick in eaves board /facia and soffit etc.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.. |
| 68 | 15 mm cement plaster on the rough side of single or half brick wall of mix : 1 : 6 (1 cement : 6 fine sand)including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.. |
| 69 | 6 mm cement plaster of mix :1:3 (1 cement : 3 fine sand)including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.. |
| 70 | Extra for plastering done on moulding, cornices or architraves including neat finish to line and level:In one coatincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.. |
| 71 | White washing with lime to give an even shade :New work (three or more coats)including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.. |
| 72 | Distemperingwithoilboundwashabledistemper ofapprovedbrandand manufacture to give an even shade :New work (two or more coats) over including and water thinnable primming coat with cement primerincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.. |
| 73 | Finishing walls with water proofing cement paint of required shade :New work (Two or more coats applied @ 3.84 kg/10 sqm)including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.. |
| 74 | Providing and applying white cement based putty (BIRLA/ASIAN PAINTS/J.K or its equivalent) of average thickness 1 mm,ofapprovedbrandandmanufacturer,overtheplastered wallsurfaceto prepare the surface even and smooth complete.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.. |
| 75 | Providing and fixing bright finished brass single acting spring hinges with necessary brass screws etc. complete :150mmincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.. |
| 76 | Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) : Flush/ Ruled pointingincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.. |
| 77 | Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process ofrequiredlength(shape&sizeaccordingtouPVCprofile),uPVCextruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sashshall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately)including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.. |
| 78 | Casement cum fixed panel window having both end single casement panel,middle fixed panels and at top completely fixed ventilator with S.S friction hinges (350 x 19 x 1.9) made of (big series) frame 67 x 60 mm , sash67 x 80 mm , & mullion 67 x 80 mm all having wall thickness of 2.3 ± 0.2 mm and singleabove 3.00 sqm upto 5.00 sqm). |
| 79 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, including getting out the excavated soil and disposal of surplus excavated soil as directed, within all leads and lifts in all kinds of soil including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Governmentincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 80 | Providing and fixing white vitreous china pedestal type water closet (European type) (Asian Granito/CERA/HINDWARE/PARRYWARE or its equivalent) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :Providing and fixing white vitreous china pedestal type water closet with seat and lidincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 81 | Providing and fixing wash basin with C.I. brackets,Asian Granito/CERA/HINDWARE/PARRYWARE or its equivalent) 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 82 | Providing and fixing white vitreous china pedestal Asian Granito/CERA/HINDWARE/PARRYWARE or its equivalent)for wash basin completely recessed at the back for the reception of pipes and fittings.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 83 | Providing and fixing Stainless Steel A ISI (18/8) kitchen sinkAsian Granito/CERA/HINDWARE/PARRYWARE or its equivalent) as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :510x1040 mm bowl depth 178mm |
| 84 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) Asian Granito/CERA/HINDWARE/PARRYWARE or its equivalent) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushingcistern, including flush pipe, with manually controlled device (handle lever) conformingtoIS:7231,withallfittingsandfixturescomplete,including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size type foot rests 580x440 mm with integralincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 85 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 86 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 40mm dia.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 87 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of pprovedquality)completewith6mmthickhardboardgroundfixedto wooden cleats with C.P. brass screws and washers complete |
| 88 | Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL-PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & Concealed work, including cutting chases and making good the wall etc.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 89 | 1216 (16 mm OD) pipe (Sixteen millimeter) |
| 90 | 1620 (20 mm OD) pipe (Twentymillimeter) |
| 91 | 2532 (32 mm OD) pipe (Thirty twomillimeter) |
| 92 | Providing and fixing G.I. pipes of heavy grade complete with G.I. fittings including trenching and refilling etc. In all Floor In all Floor including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 93 | 15 mm dia nominal bore (Fifteenmillimeter) |
| 94 | 20 mm dia nominal bore (Twentymillimeter) |
| 95 | 32 mm dia nominal bore(Thirty twomillimeter) |
| 96 | Making coneection ofG.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete: 25to 40mm nominal boreincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 97 | Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete ( cost of water meter and stop stop cock to be paid seprately).including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 98 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 99 | 20 mm (Twentymillimeter) nominal bore. |
| 100 | 32 mm(Thirty twomillimeter)nominal bore. |
| 101 | Providing and fixing ball valve (brass) of approved quality, High or low pressure,with plastic floats complete 15 mm nominal bore :including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 102 | Providing and fixing uplasticised PVC connection pipe with brass unions : 30 cm length 15 mm nominal boreincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 103 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work):including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 104 | 15 mm dia nominal bore (Fifteenmillimeter) |
| 105 | 20 mm dia nominal bore (Twentymillimeter) |
| 106 | 32 mm dia nominal bore(Thirty twomillimeter) |
| 107 | Constructing masonry Chamber30x30x50 cminside,inbrick workincement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat ofWith common burnt clay F.P.S.(non modular) bricks of class designation 7.5including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 108 | Providingandfixingbendofrequireddegreewithaccess door,insertion rubber washer 3 mm thick, bolts and nuts complete.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 109 | 100mm (one Hundred millimeter) dia.Sand cast iron S&S as per IS - 1729 |
| 110 | 75mm dia.(Seventy Five millimeter) Sand cast iron S&S as per IS - 1729 |
| 111 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank,Five layer (JINDALor its equivalent)IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 112 | Providing and fixing C.P. brass bib cock (CERA/JAGUAR /Parryware or its equivalent )of approved quality conforming to IS:8931:15 mm nominal boreincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 113 | Providing and fixing C.P. brass long nose bib cock (CERA/JAGUAR /Parryware or its equivalent ) of approved quality conforming to IS standards and weighing not less than 810 gms 15mm nominal boreincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 114 | Providing and fixing PTMT pillar cock(CERA/JAGUAR /Parryware or its equivalent )of approved quality and colour.15 mm nominal bore, 107 mm long foam flow, weighing not less than 110 gmsincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 115 | Providing and fixing CP Brass Single lever telephonic wall mixer (CERA/JAGUAR /Parryware or its equivalent )of quality & make as approved by Engineer in charge.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 116 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 117 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 118 | Providingandfixing 600x120x5 mmglassshelfwithedgesroundoff, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 119 | Providing and fixing toilet paper holder :C.P. brassincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 120 | Providing and fixing soil, waste and vent pipes( Finolex/Astral or its equivalent ) :including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 121 | 100mm (one Hundred millimeter) dia. Sand cast iron S&S pipe as per IS: 1729 |
| 122 | 75mm dia.(Seventy Five millimeter). Sand cast iron S&S pipe as per IS: 1729 |
| 123 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 124 | 100mm (one Hundred millimeter)inlet and 100mm (one Hundred millimeter)outlet dia. Sand cast iron S&S as per IS: 1729 |
| 125 | 100mm (one Hundred millimeter) inlet and 75mm dia.(Seventy Five millimeter)outletdia.Sand cast iron S&S as per IS: 1729 |
| 126 | Cutting chases in brick masonry walls for following diameter sand cast iron/ centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) :including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 127 | 100mm (one Hundred millimeter) dia. |
| 128 | 75mm dia.(Seventy Five millimeter) |
| 129 | Providing and fixing door bend with oval access door,insertion rubber washer 3mm thick bolts and nuts ISI marked complete including fixing with aprooved adhesive etc.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 130 | 100mm (one Hundred millimeter) dia. Sand cast iron S&S as per IS - 3989 |
| 131 | 75mm dia.(Seventy Five millimeter) Sand cast iron S&S as per IS - 1729 |
| 132 | Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 133 | 100x100x100 mm Sand cast iron S&S as per IS - 1729 |
| 134 | 75x75x75 mm Sand cast iron S&S as per IS - 1729 |
| 135 | Providing and fixing double equal plain junction of required degree.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 136 | 100x100x100 mm Sand cast iron S&S as per IS - 1729 |
| 137 | 75x75x75 mm Sand cast iron S&S as per IS - 1729 |
| 138 | Providing and fixing collars ISI marked including fixing with aprooved adhesive etc completeincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 139 | 100mm (one Hundred millimeter) dia. Sand cast iron S&S as per IS - 1729 |
| 140 | 75mm dia.(Seventy Five millimeter). Sand cast iron S&S as per IS - 1729 |
| 141 | Providing and fixing bat clamps ISI marked of approved design with steel screws and rawal plugs etc. completeincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 142 | 100mm (one Hundred millimeter) dia. |
| 143 | 75mm dia.(Seventy Five millimeter) |
| 144 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 145 | Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 146 | Insidesize120x90cmand90cmdeepincludingC.I.coverwithframe (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) : With Sewer bricks conforming to IS : 4885including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 147 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 150 mm diameter S.W. pipeincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 148 | Providingandlayinginpositioncementconcreteofspecifiedgrade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size)including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 149 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarseincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 150 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : cement mortar 1:4 (1 cement : 4 coarse sand)including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 151 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed 75 mm diameter including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 152 | Providingandfixingonwallfaceunplasticised - PVCmouldedfittings/accessories for unplasticised Rigid PVC rain water pipes( Finolex/Astral or its equivalent )conforming to IS :13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee with door 110x110x110 mm including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 153 | Constructing masonry Chamber60x60x75 cm,insidein brick work incement mortar 1:4 (1 cement : 4 coarse sand) for fire hydrants, with C.I. surface box 350x350 mm top and 165 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 154 | Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm dia including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 155 | Providing and fixing75mm dia.(Seventy Five millimeter) . PVC Cowl including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 156 | Providingandlayinginpositioncementconcreteofspecifiedgrade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size) including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 157 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved qualityL D- 2.5 Circular shape 450 mm internal diameter including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
